检索结果-内蒙古大学图书馆

Molecular dynamics study on bubble nucleation characteristics on rectangular Nano-Grooved surfaces

学校读者我要写书评

暂无评论

Journal of Molecular Liquids 2025年 420卷

作者： Li, Zhibin Lou, Jiacheng Wu, Xiaoyi Li, Xujun Chang, Fucheng Wang, Hengyuan Li, Huixiong State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China National Key Lab of Aerospace Power System and Plasma Technology School of Mechanical Engineering Xi'an Jiaotong University Xi'an710049 China

The micro/nanoscale structures on metal surfaces are of significant research interest for boiling heat transfer and exhibit great application potential in the thermal management of high-power electronic devices. This study employs the molecular dynamics simulation method to investigate the boiling heat transfer characteristics of hydrophilic rectangular shallow nano-groove structures, comparing them with the smooth surface. The phase transition heat transfer characteristics of liquid films on the smooth surface, single rectangular groove (SRG) surface, and overlapping rectangular groove (ORG) surface are revealed by analyzing the variations of parameters such as energy contour diagrams, bubble volume, liquid film temperature, and average potential energy. The research results indicate that water molecules are in a solid-like state within shallow grooves, while the nucleation sites of initial bubbles form randomly outside the grooves. During the initial heating and bubble growth, the initial nucleation time and bubble growth rate of ORG are slower than those of SRG, due to the small rectangular groove on ORG that diminishes the energy transfer efficiency. During bubble formation and growth, the average kinetic energy within the liquid film fluctuates at the nucleation moment in the critical nucleation region, and the average potential energy rises from −0.083 eV. These findings provide a theoretical basis for the micro/nanoscale structure design of vapor-liquid phase transition thermal management devices. © 2024 Elsevier B.V.

关键词： Kinetic energy

Influence Study of the Anisotropic Scattering and Solar Radiation on the Radiation Working Performance of Liquid Droplet Radiator

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Fei, Yiheng Fu, Jianghan Wang, Chenglong Tian, Wenxi Guanghui, S.U. Qiu, Suizheng Department of Nuclear Science and Technology State Key Lab. of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Xi’an710049 China

The Liquid Droplet Radiator (LDR), a lightweight frameless radiant heat rejection system, is widely regarded as the optimal heat rejection solution for megawatt-scale space nuclear power systems. The LDR dissipates heat to space through its droplet layer, which plays a crucial role in determining its radiative rejection capacity. Radiation beams undergo a series of emission, scattering, and absorption processes within the layer before being emitted into space. Prior studies typically assume isotropic scattering in this process. However, this study introduces a 3D model of the LDR layer based on Mie theory and Monte-Carlo methods to investigate the impact of anisotropic scattering and solar radiation. Our calculations reveal that the working fluid exhibits strong forward anisotropic scattering characteristics. Under the anisotropic assumption, the heat rejection capability of the LDR is 27-33% higher compared to the isotropic assumption. Regarding the temperature distribution within the LDR, under the anisotropic assumption, the layer's temperature is 6 K lower at the XY boundary surface and 3 K higher at the layer median, as opposed to the isotropic assumption. We introduce the concept of the probability of a light beam escape to elucidate the distinct beam transmission mechanisms and temperature distribution. When the distance between the LDR and the sun is in the vicinity of 1 AU, the impact of solar radiation on the LDR's ability to operate is on the order of 1E-5, which is almost negligible. This study provides a theoretical foundation for calculating the heat rejection capacity during the LDR design phase. © 2024, The Authors. All rights reserved.

关键词： Solar radiation

Model Predictive Control for Automatic Operation of Space Nuclear Reactors: Design, Simulation, and Performance Evaluation

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Fu, Jianghan Jin, Zhao Dai, Zhiwen Su, Guanghui Wang, Chenglong Tian, Wenxi Qiu, Suizheng Department of Nuclear Science and Technology State Key Lab. of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Xi’an710049 China

Space nuclear reactors possess the inherent benefits of independence from solar energy and the capability to withstand intricate external circumstances. Consequently, the establishment of a dependable automatic control system assumes utmost significance. In this paper, a high-fidelity nonlinear space thermionic nuclear reactor system model is established. An automatic control system with a model predictive control (MPC) controller is designed based on the system. In the case of a nuclear power step response, the MPC controller achieves an overshoot of 0.07% and a settling time of 0.65s. For an electric power step response, the MPC controller yields an overshoot of 0.28% and a settling time of 36.6s. These control performances are better than those achieved by the PID controller. In power tracking control, the MPC controller demonstrates virtually error-free tracking performance. When external reactivity disturbances are introduced, the MPC controller swiftly compensates for the disturbances at the desired level. © 2023, The Authors. All rights reserved.

关键词： Model predictive control

Investigations of Sodium Droplet Spreading and Evaporation on Surfaces with Different Wettability Based on Lattice Boltzmann Simulations

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Tang, Songsheng Guo, Kailun Tian, Zhixing Wang, Mingjun Wang, Chenglong He, Xiaoqiang Su, Guanghui Qiu, Suizheng Tian, Wenxi School of Nuclear Science and Technology State Key Lab. of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Shaanxi Xi’an710049 China Key Lab. of Nuclear Reactor System Design Technology China Nuclear Power Research and Design Institute Chengdu610213 China

The spreading and evaporation of sodium droplets is one of the fundamental phenomena in high-temperature heat pipes. The LBM sodium two-phase flow and phase transition model, which can simulate a huge liquid-vapor density ratio, is first established and validated. Then, the spreading and evaporation processes of sodium droplets on solid walls with different wettability are numerically simulated and analyzed. The main conclusions obtained are as follows: (1) The dimensionless spreading diameter and time of the droplet spreading process conforms to Tanner's power law, and the power exponent has exponential relationship with the equilibrium wetting angle;(2) The maximum dimensionless spreading diameter is negatively and linearly correlated with the equilibrium wetting angle;(3) Evaporation of sodium droplets under constant heat flow conditions shows a mixed pattern. The droplets will be detached from the droplet wall at the late stage of evaporation, and the larger the equilibrium wetting angle the sooner the droplets detach. © 2024, The Authors. All rights reserved.

关键词： Evaporation

Preliminary Conceptual Design with Neutronics and Thermal-Hydraulics Assessments of Fustar

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Zhou, Xingguang Zhang, Dalin Li, Xinyu Lv, Xindi Jiang, Dianqiang Tian, Wenxi Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'An710049 China

The fluoride-salt-cooled high-temperature advanced reactor (FuSTAR) is an advanced small modular reactor, which aims to the electric supplement and clean heat production to western China. In this study, neutronics and thermal-hydraulics analysis are also carried out, and established the core layout and material ratio under the near-critical condition. The parameters of the designed core are evaluated quantitatively from various aspects. The results show that FuSTAR has sufficient shutdown depth, the equilibrium cycle is 3.24 years, and the discharge burnup depth is 106 GWd/MtU. The analysis of 1/6 core porous media shows that the peak fuel temperature under normal operating condition is 1009.3 K, which is far below the limit of 1573 K. Relevant design and analysis results can provide the reference for the subsequent small modular FHR design and construction. © 2023, The Authors. All rights reserved.

关键词： Computational fluid dynamics

Experimental Investigation on flow and Heat Transfer Characteristics of Helium in Rectangular Narrow Slit Channel

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Li, Changzhong Wang, Chenglong Sun, Yanyu Chen, Ronghua Tian, Wenxi Su, Guanghui Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering China Department of Nuclear Science and Technology Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Shaanxi Xi’an710049 China China Nuclear Power Engineering Co. Ltd. Beijing100840 China

Helium is utilized as coolant in high temperature gas cooled reactors. Rectangular narrow slit channels are commonly present in the core. The flow and heat transfer properties of helium significantly affect the core temperature and flow distribution. This paper experimentally investigates the flow and heat transfer properties of high temperature helium in rectangular narrow slit channel. The Reynolds numbers ranged from 468 to 5327, the temperature ratio of wall to bulk from 0.91 to 1.22, the helium outlet temperature up to 944 K, and the maximum heat flux density up to 0.101 MW/m². In the experiment, the total and local convective heat transfer coefficients, along with the friction factors, are measured. Correlation equations for the Nusselt number and friction factor with respect to Reynolds number are derived. The primary findings are as below: the friction factors of helium in rectangular narrow slit channels are significantly larger than those calculated by current empirical correlations. In the turbulent zone, the measured local Nusselt numbers are in excellent accordance with the Gnielinski correlation;however, a significant discrepancy exists in the laminar zone. New flow heat transfer correlation equations are proposed on the bases of experimental data. Upon comparison, the total Nusselt numbers fall in the error of 10%, and almost all local Nusselt numbers and the friction factors fall in the error of 20%. © 2024, The Authors. All rights reserved.

关键词： Helium

Characterization of High-Performance Nanostructured Wick for Heat Pipes

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Sun, Qishi Han, Ruiyu Guo, Kailun Wang, Chenglong Zhang, Jing He, Xiaoqiang Qiu, Suizheng Su, Guanghui Tian, Wenxi Department of Nuclear Science and Technology State Key Lab. of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Xi’an710049 China Key Lab. of Nuclear Reactor System Design Technology China Nuclear Power Research and Design Institute Chengdu610213 China

To investigate the best performance wick forms to support the design and fabrication of high-performance heat pipes, in this paper, two kinds of nanostructured wick were prepared by the oxidation-reduction method. The effect of surface nanostructure on the wick performance was investigated by comparing the surface characteristics, capillary properties, permeability, and evaporation properties. The result shows that the nanostructured wick presented excellent super hydrophilic properties. A liquid-lift visualization experimental method for measuring the capillary performance factor M was proposed, and it was verified to be correct by the separation effect of the capillary pumping experiment under a vacuum environment. With the increasing oxidized degree, the densification of nanoparticles on the wick surface increased the capillary performance factor M from 8.68 μm to 13.81 μm, with a maximum enhancement of 59.1%. The effective capillary radius decreased from 4.70×10-5 m to 4.01×10-5 m, with a maximum reduction of 14.9%. The permeability increased from 4.33×10-10 m2 to 5.83×10-10 m2, with a maximum enhancement of 34.7%. The increase in porosity made the effective capillary radius dominate the competition for permeability, and the capillary performance factor decreased by 17.1%. The thermal resistance of the wick decreased with the enhancement of the capillary performance factor, which fell from 2.03×10-3 m2·K/W to 1.26×10-3 m2·K/W. The current study provides a reference for the future design and preparation of high-performance heat pipe wicks. © 2023, The Authors. All rights reserved.

关键词： Heat resistance

Development and Verification of Safety Analysis Code to Model and Simulate Steam power Conversion System in Sodium-Cooled Fast Reactor

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Liu, Shuo Jin, Zhao Wang, Chenglong Zhang, Dalin Tian, Wenxi Qiu, Suizheng Su, Guanghui Yang, Jun School of Nuclear Science and Technology State Key Lab. of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology Xi’an Jiaotong University Shaanxi Xi’an710049 China China Institute of Atomic Energy Beijing102413 China

Sodium-cooled fast reactor (SFR) is one of the most promising generation IV reactor type. SFR system is composed of three heat transfer circuits. SFR will generate electricity, which requires accuracy prediction of steam power conversion system. Therefore, a one-dimensional thermal-hydraulic analysis code of the steam power conversion system of SFR has been developed. A modular modeling method was applied. Each equipment is packaged as a separate module. The system model can be obtained by connecting modules to achieve flexible modeling. Compared with RELAP5, the code uses a general algorithm to solve ODE, which enhances the universality of code. The model is verified with design results of Daya Bay Nuclear power Plant and BN-600 steam generator. The maximum relative errors for pressure and temperature are 5.44% and 2.40%, respectively. It is proven that the code developed can be used in the analysis and design the steam power conversion system. The steady-state analysis of SFR steam power conversion circuit is carried out. The design could provide a reference for the future development of steam power conversion system in SFR. © 2023, The Authors. All rights reserved.

关键词： Sodium-cooled fast reactors

Numerical Study of High-Energy Spark Ignition Characteristics in a Scramjet Combustor

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Gao, Ziyan Zhang, Meng Zhang, Zhibo Wu, Yun Zheng, Xing Miao, Huifeng National Key Lab of Aerospace Power System and Plasma Technology Xi’an Jiaotong University Xi’an710049 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong Universiy Xi’an710049 China National Key Lab of Aerospace Power System and Plasma Technology Air Force Engineering University Xi’an710038 China Shaanxi Key Laboratory of Environment and Control for Flight Vehicle School of Aerospace Engineering Xi’an Jiaotong University Shaanxi 710049 China

Reliable ignition is a fundamental prerequisite for the scramjet engines. In order to improve the reliability of ignition, further enhance the application of spark ignition in engineering, and improve the ignition ability in the field of supersonic combustion, an innovative long electrode distance high-energy spark igniter (LHSI) system was proposed by our research team. To reveal the instantaneous ignition characteristics of the LHSI, a simulation model of the LHSI is established and verified by experiments. Based on this, the formation and development of the initial fire core of vaporized kerosene and the ignition characteristics of LHSI in a scramjet combustor were simulated and compared with the conventional high-energy spark igniter (HSI). The analysis revealed that the success of the cavity ignition is greatly influenced by the local equivalent ratio of the initial flow field and the penetration depth of the initial flame core. Meanwhile, the fore recirculation zone of the cavity plays a key role in stabilization and development of the initial fire core. Compared with the HSI, the LHSI can produce initial flame core with higher penetration and greater size, which is the main reason for why LHSI has a broader ignition boundary. © 2024, The Authors. All rights reserved.

关键词： Ignition