检索结果-内蒙古大学图书馆

Experimental research on thermal deviation of high temperature reheater in the single tangential Π type boiler based on radiation spectroscopy analysis 7

Experimental research on thermal deviation of high temperatu...

引用

7th International Conference on power engineering, ICOPE 2019

作者： Xie, Jianwen Wen, Wubin Yang, Bin Yang, Fei Ping, Li Zhang, Fei Zhang, Jianwen Electric Power Research Institute Co. Ltd. Beijing100025 China Jiangsu Guohua Chenjiagang Power Generation Co. Ltd. Jiangsu Yancheng224631 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Shanghai Boiler Works Ltd. Shanghai200245 China

The superimposed phenomenon of thermal deviation of low and high temperature reheaters was found under the high load condition in a 660MW ultra super-critical Π type boiler. And the discharge temperature deviation between the two sides of steam were more than 15℃ in high temperature reheater. In order to reveal the thermal deviation of high temperature reheater in this boiler, a probe was designed and developed to measure the visible radiation spectrums of coal dust in the high temperature reheater zone by using the servo mechanism of soot blower. The particle concentration and temperature of coal dust were obtained by the parameter fitting method based on Planck's radiation law. The measurement result shows that the burning delay of pulverized coal caused by originally equipped one-level air staged combustion system and enrichment of coal dust under the action of inertia are the main reasons of thermal deviation of high temperature reheater. And the momentum of SOFA to eliminate the rotation is insufficient in this boiler. In order to improve the thermal balance of both sides, a new type of the two-level air staged combustion system was proposed as principle of retrofit scheme. © ICOPE 2019 - 7th International Conference on power engineering, Proceedings. All rights reserved.

关键词： Coal combustion

来源：评论

学校读者我要写书评

暂无评论

Theoretical and experimental analyses of a novel recirculated regenerative rotary desiccant wheel dehumidification system 32

Theoretical and experimental analyses of a novel recirculate...

引用

32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2019

作者： Han, Xiaoqu Wu, Wenxiang Zhou, Zhijie Wang, Yu Chong, Daotong Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China China Ship Development and Design Center Wuhan China

ISBN: (纸本)9788361506515

The high humidity environment in the submarine cabins results in high energy consumption of the air conditioning system. Moreover, the removal of the hydrogen contained in the air, which constitutes a threat to crew’s safety, generates a huge amount of heat. It is of particular significance to reduce the humidity of the air efficiently, through recovery of the waste heat in the dehydrogenation process. Therefore, a novel recirculated regenerative desiccant wheel dehumidification system is proposed in the present work for submarine air-conditioning. The dehumidification rate was optimized through an appropriate proportion between inlet and recirculating air flows. Theoretical modeling and experimental study were carried out to explore the optimal dehumidification performance at different working conditions. The influence of process air parameters (including temperature and humidity), regeneration air parameters (including bypass ratio and regeneration air temperature) and rotary desiccant wheel parameters (including rotation speed and air flow ratio) were analyzed. It was found that the dehumidification rate could be effectively improved compared to sea water direct cooling. It increased with increasing regeneration air temperature and temperature drop. There was an optimal bypass ratio for the system, around 55%-70%, to obtain the highest dehumidification rate. The ratio increased with the regeneration air temperature. There existed an optimal rotary speed (approx. 12 r·h-1) and optimal air flow ratio (approx. 70%). Overall, the feasibility of the proposed system was validated and the dehumidification characteristics at various working conditions were demonstrated to prompt its application. © ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. All rights reserved.

关键词： Air conditioning

来源：评论

学校读者我要写书评

暂无评论

Experimental study on pressure and temperature distribution characteristics of subcritical and supercritical water in vertical flow channel

International Journal of Fluid Engineering

引用

International Journal of Fluid engineering 2024年第4期1卷 56-64页

作者： Hui Jin Huibo Wang Yi Li Petr A.Nikrityuk State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityShaanxi 710049China Mechanical Engineering Department Eindhoven University of TechnologyEindhovenNetherlands Chemical and Materials Engineering Department University of AlbertaEdmontonAlberta T6G 2R3Canada

To enhance knowledge about efficiency improvement and reactor optimization in supercritical water gasification,an experimental system was designed to study the pressure and temperature distribution of subcritical and supercritical water in a channel,representing a simplified continuous *** pressure drop and temperature distribution along and perpendicular to the forced flow are studied by the measure points inserted inside the test *** results show that the pressure drop in the test section is linearly negatively correlated with the average enthalpy of the inlet and outlet,eventually reaching negative values(-0.177 MPa)at high average enthalpy(2300 kJ kg^(-1)).Temperature and specific enthalpy along the flow direction match theoretical estimates,except near the pseudocritical *** subcritical cases,horizontal temperature differences are positively correlated with enthalpy differences and mass flow rates but remain nearly constant in supercritical ***,with fluid temperature rising from the pseudocritical point,the horizontal temperature difference first increases,then decreases,and reaching a peak of 4.29 K at a fluid temperature of 664 *** of the obtained data reveals that the negative correlation and values of the pressure drop are caused by fluid volume ***,fluid volume expansion,near-wall natural convection,and turbulent forced flow fluctuations contribute to horizontal temperature non-uniformity.

关键词： flow distribution channel

来源：评论

学校读者我要写书评

暂无评论

Ultrafine polycrystalline titania nanofibers for superior sodium storage

引用

Journal of Energy Chemistry 2019年第11期28卷 153-161页

作者： Zhidan Diao Daming Zhao Chunxiao Lv Hongli Liu Dongjiang Yang Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina School of Environmental Science and Engineering Collaborative Innovation Centerfor Marine Biomass FibersMaterials and Textiles of Shandong ProvinceQingdao UniversityQingdao 266071ShandongChina

Sodium ion batteries have a huge potential for large-scale energy storage for the low cost and abundance of sodium resources. In this work, a novel structure of ultrafine polycrystalline TiO2 nanofibers is prepared on nickel foam/carbon cloth by a simple vapor deposition method. The as-prepared TiO2 nanofibers show excellent performance when used as anodes for sodium-ion batteries. Specifically, the TiO2 nanofibers@nickel foam electrode delivers a high reversible capacity of 263.2 m Ahg^-1 at 0.2 C and maintains a considerable capacity of 144.2 m Ahg^-1 at 10 C. The TiO2 nanofibers@carbon cloth electrode also shows excellent high-rate capability, sustaining a capacity of 148 m Ahg^-1 after 20 0 0 cycles at 10 C. It is believed that the novel nanofibrous structure increases the contact area with the electrolyte and greatly shortens the sodium ion diffusion distance, and meanwhile, the polycrystalline nature of nanofibers exposes more intercalation sites for sodium storage. Furthermore, the density functional theory calculations exhibit strong ionic interactions between the exposed TiO2(101) facets and sodium ions, leading to a preferable sodiation/desodiation process. The unique structural features endow the TiO2 nanofibers electrodes great advantages in rapid sodium storage with an outstanding high-rate capability.

关键词： Polycrystalline titania Nanofibers Sodium storage High-rate capability

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of high temperature gas cooled reactors on less of coolant accident 18

Numerical simulation of high temperature gas cooled reactors...

引用

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019

作者： Zhang, Shuangbao Li, Liangxing Xie, Wei Wang, Kailin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi’an city710049 China

The high temperature gas-cooled reactor (HTR) is well known for its prominent inherent safety, high efficiency and low carbon environmental protection, which has been identified as one of the candidates for the Generation IV nuclear energy system technology. Accurate and reliable thermal hydraulic analysis is of great significance to the system design and safe operation of HTR. Based on the coolant flow and heat transfer process in the core of HTR, this study establishes a three-dimensional model by using CFD (Computational Fluid Dynamics) software firstly, and the flow and heat transfer process of helium coolant is simulate in the core. The temperature distribution of HTR is calculated at steady state, and the calculation results were compared with the related published results for validation and verification. After that, the models are employed to study the thermal hydraulic characteristics under the loss of coolant accident of HTR. The results show that as the coolant passes through the core from top to bottom, helium is continuously heated, and the temperature increases from top to bottom. The temperature reached a maximum at the core exit position of 1032.75 K. It stated that the model can be employed to simulate the thermal hydraulic analysis for HTR. The calculation results of the loss-of-coolant, indicates t as the flow rate decreases, the coolant temperature rises gradually. When the coolant is completely lost, the temperature reaches a maximum of 1723.19 K, and it is still lower than the design limit of 1893.15 K. © 2019 American Nuclear Society. All rights reserved.

关键词： Coolants

来源：评论

学校读者我要写书评

暂无评论

Exploring Geometric Chirality in Nanocrystals for Boosting Solar-to-Hydrogen Conversion

引用

Angewandte Chemie 2024年第45期136卷

作者： Wenlong Fu Qi Gao Chunyang Zhang Lili Tan Biao Jiang Chengyu Xiao Prof. Maochang Liu Prof. Peng-peng Wang State Key Laboratory for Mechanical Behavior of Materials Shaanxi International Research Center for Soft Matter School of Materials Science and Engineering Xi'an Jiaotong University Xi'an Shaanxi 710049 PR China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an Shaanxi 710049 PR China

Advancing catalyst design is pivotal for the enhancement of photocatalytic processes in renewable energy conversion. The incorporation of structural chirality into conventional inorganic solar hydrogen nanocatalysts promises a significant transformation in catalysis, a feature absent in this field. Here we unveil the unexplored potential of geometric chirality by creating a chiral composite that integrates geometric chiral Au nanoparticles (NPs) with two-dimensional C 3 N 4 nanosheets, significantly boosting photocatalytic H 2 evolution beyond the achiral counterparts. The superior performance is driven by the geometric chirality of Au NPs, which facilitates efficient charge carrier separation through the favorable C 3 N 4 -chiral Au NP interface and chiral induced spin polarization, and exploits high-activity facets within the concave surfaces of chiral Au NPs. The resulting synergistic effect leads to a remarkable increase in photocatalytic H 2 evolution, with an apparent quantum yield of 44.64 % at 400 nm. Furthermore, we explore the selective polarized photo-induced carrier separation behavior, revealing a distinct chiral-dependent photocatalytic HER performance. Our work advances the design and utilization of chiral inorganic nanostructures for superior performance in energy conversion processes.

关键词： Geometric chirality Nanoparticles Photocatalytic hydrogen evolution reaction Chiral effect

来源：评论

学校读者我要写书评

暂无评论

The theoretical and numerical analysis on a multi-blade liquid lead pump 27

The theoretical and numerical analysis on a multi-blade liqu...

引用

27th International Conference on Nuclear engineering: Nuclear power Saves the World!, ICONE 2019

作者： Wang, Kailin Li, Liangxing Xie, Wei Zhang, Shuangbao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi'an city710049 China

ISBN: (纸本)9784888983051

Lead or lead-alloy cooled fast reactors (LFRs) have been proved to be the most promising Generation IV reactors with high performance in neutronics, thermal hydraulics and security features. Small forced circulation modular LFRs is one of the potential candidates for LFRs development which has attracted particular attention in recent years. When lead-bismuth eutectic (LBE) is used as coolant, the primary LBE pump is a key conveying equipment, and therefore the hydraulic performance of LBE pump is great important to the safety of LFR. Motivated by improving the hydraulics performance of LBE pump, this paper presents a theoretical and computational analysis on an axial flow pump. The guide blades are set at the outlet of the impeller to eliminate the rotational motion of the liquid LBE and transform the kinetic energy of the rotational motion into pressure energy. The rotation angle of the blade is optimized based on the theoretical analysis to reduce the vortex and raise efficiency. As well, the outlet speed and pressure parameters of each part in the pump are calculated. After that, a three-dimensional model of the modified pump is established by using CFD software and the flow characteristics of LBE in the pump are simulated. Albeit the high velocity liquid LBE alloy still exists in the side of pump shroud, some erosion-related issues remain to be fully addressed. The results of the study show that the axial LBE pump could be used as a viable solution for the design of the new generation of small module reactor primary pump from a thermo-fluid dynamic point of view. © 2018-2019 by JSME

关键词： Pumps

来源：评论

学校读者我要写书评

暂无评论

Three-dimensional modeling and thermal hydraulic analysis of high temperature gas-cooled reactor core 27

Three-dimensional modeling and thermal hydraulic analysis of...

引用

27th International Conference on Nuclear engineering: Nuclear power Saves the World!, ICONE 2019

作者： Zhang, Shuangbao Li, Liangxing Xie, Wei Wang, Kailin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi'an city710049 China

ISBN: (纸本)9784888983051

The high temperature gas-cooled reactor (HTR) is an advanced reactor with the characteristics of Generation IV nuclear energy system which has attracted wide attention due to the excellent performances of inherent safety, economy, high efficiency and low carbon environmental protection. Accurate and reliable thermal hydraulic analysis is of great significance for studying the flow and heat transfer in the core of HTR. Based on the coolant flow and heat transfer process in the core of HTR, this study establishes a three-dimensional coupled model by using CFD (Computational Fluid Dynamics) software firstly, and the flow and heat transfer process of helium coolant is simulate in the core. The temperature variation in the reactor is calculated under the conditions of steady-state operation of the HTR core, and the calculation results by the present models were compared with calculated results from the benchmark software of Thermix and the related published results. The results showed that the average temperature of the outlet section is 759.6 ℃, and the maximum relative error with the published data is 1.25%. The steady-state results under the full power conditions based on the three-dimensional model are in good agreement with the calculation data from those of THERMIX. It stated that the three-dimensional model can be employed to simulate the thermal hydraulic analysis for HTR. On this basis, the heat transfer characteristics of core is simulated under 50% full power, and the are result helpful for the operation and design of HTR. © 2018-2019 by JSME

关键词： Porous materials

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on the Boiling Heat Transfer Characteristics of R134a in a Helically Coiled Tube

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2019年第3期40卷 587-593页

作者： Niu, Xiao-Juan Yuan, Huai-Jie Quan, Chen Bai, Bo-Feng Zhao, Liang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

The characteristics of R134a boiling heat transfer in a vertically helically coiled tube are studied. The experimental parameters are as follows: the heat flux is 10∼60 kW•m-2, the mass flux is 195∼400 kg•m-2 •s-1, the pressure is 0.8∼1.1 MPa, and the outlet vapor quality is 0.1∼0.9. The experimental data are compared with the existing correlations of boiling heat transfer coefficient. Based on the analysis of boiling heat transfer mechanism, a new correlation for boiling heat transfer in coiled tube is proposed. The circumferential distribution characteristics of wall temperature and heat transfer coefficient are analyzed. The wall temperatures at inner and top side are relatively higher, and the heat transfer coefficients at the bottom and the outer side are relatively higher. The local heat transfer coefficients are compared with the new correlation proposed in this paper. The results show that the heat transfer coefficients at top and bottom sides can be predicted by the new correlation. However, the new correlation underestimates the heat transfer coefficient at the outer side and overestimates that at the inner side, the deviations are 16.6% and -11.9% respectively. © 2019, Science Press. All right reserved.

关键词： Heat transfer coefficients

来源：评论

学校读者我要写书评

暂无评论

Numerical analysis of the axial lead-bismuth pump performace base on the different rotation speed 18

Numerical analysis of the axial lead-bismuth pump performace...

引用

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019

作者： Wang, Kailin Li, Liangxing Xie, Wei Zhang, Shuangbao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi’an city710049 China

The hydraulic performance of lead-bismuth eutectic (LBE) pump is of great importance for the safety aspects concerning lead-alloy cooled fast reactors (LFRs). To investigate the effect of different rotation speed on the performance of axial LBE pump, different rotation speed axial LBE pumps are designed by planar cascade and streamline method with the same mass flow rate and hydraulic head. Ansys BladeGen is used to establish the three-dimensional model of the axial-flow pump. CFD software (Ansys CFX) carry out numerical calculation. Numerical studies are used to compared the performance between two pumps with different rotation speed. To improve the accuracy of CFD simulation, the numerical result is verified by grid independence method and compared with theoretical calculation result. The flow velocity of the liquid LBE have great impact on the design of LBE pump because of the requirement to avoid affect of corrosion. It is found that the maximum flow velocity of low rotation speed pump is about 7.8 m/s, which is lower than the maximum flow velocity of high rotation speed pump in the case of constant volume and performance. Performance of low rotation speed pump meets the requirements of the reactor operating under long-term high load. The research results could be a viable solution used as a reference for the development of LFRs. © 2019 American Nuclear Society. All rights reserved.

关键词： Pumps

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：