检索结果-内蒙古大学图书馆

12th Asia-Pacific Conference on Combustion, ASPACC 2019

作者： Hu, Erjiang Xu, Zhaohua Gao, Zhenhua Huang, Zuohua Stake Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No.28 Xianning West Road Shaan Xi710049 China

The outwardly propagating spherical flame method was used to measure the laminar burning velocity of a commercial gasoline fuel having RON of 92 and gasoline surrogate. Measurements were conducted at the equivalence ratio of 0.8 to 1.5, initial temperatures of 358 K, 403 K, and 448 K and initial pressures of 1 atm, 2 atm and 5atm in a constant volume bomb. The surrogate of primary reference fuel (PRF-92, 92% iso-octane + 8% n-heptane) and toluene reference fuel (TRF-92, 16.69% iso-octane + 22.65% n-heptane + 60.66% toluene) were proposed to match the laminar burning velocity of gasoline (CNPC 92#). It could be found that the TRF-92 was able to successfully reproduce the laminar burning velocity of the gasoline under various experimental conditions. © Asia-Pacific Conference on Combustion, ASPACC *** right reserved.

关键词： Gasoline

来源：评论

学校读者我要写书评

暂无评论

Thermal Simulation for a Mechanical Spindle With External Cooler Across Grease Coated Interface

Research Square

引用

Research Square 2021年

作者： Zhao, Liang Lei, Mohan Ren, Hongdi Wang, Jinshi Wang, Shuai Li, Ben Q. Yang, Jun Mei, Xuesong Xi'an Jiaotong University China State Key Laboratory for Manufacturing Systems Engineering Xi'an Jiaotong University Xi'An710049 China Shaanxi Key Laboratory of Intelligent Robots Xi'an Jiaotong University Xi'An710049 China School of Mechanical and Precision Instrument Engineering Xi'an University of Technology 710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Department of Mechanical Engineering College of Engineering and Computer Science University of Michigan MI48128 United States

Spindles in precision boring machine often work in low speed and heavy load without internal cooling, and the thermal error is nonnegligible. So an external cooling system was designed, and the effectiveness of the designed scheme needs to be preliminarily verified by simulation before building the cooling system. Thermal simulations of the spindle with an external cooler require calculating the thermal resistance of the thermal grease-coated interface between the cooler and spindle. Models describing the contact thermal resistance and total thermal resistance for metal contact filled with silicone grease based on solid-liquid interface force equivalence were described in this paper, and experiments were also conducted to verify the accuracy of these models. The contact thermal resistances between the cast iron/copper and silicone grease on flat or arc surfaces were calculated, and the bulk thermal resistance of the silicone grease layer was calculated. The total heat transferred between the cooler and the silicone grease-coated interface of the spindle were calculated. Heat transfer and heat generation in the spindle were calculated, and a finite element model was established to verify the effectiveness of the designed external cooling scheme. Finally, results from experiments for the spindle in different conditions show that the external cooling system decreases the time to reach thermal equilibrium by more than 60%. The RMSE of the simulated thermal elongation is less than 5.7044 μm when the rotating speed of 3000 rpm, and is less than 3.9714 μm when the rotating speed is 1500 rpm. © 2021, CC BY.

关键词： Cooling

来源：评论

学校读者我要写书评

暂无评论

Wake of a stationary sphere near a wall

引用

Huagong Xuebao/CIESC Journal 2019年第9期70卷 3300-3306页

作者： Li, Xing Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'anShaanxi710049 China

The flow characteristics of the sphere under uniform flow in a large space have been extensively studied, but the influence of the wall on the flow characteristics of the sphere is not clear. The wake of the particle is focused. Results show that there are three regimes of the sphere wake, which are steady wake, unsteady symmetric wake and unsteady asymmetric wake. If Re400, the vortex shedding is not symmetric and becomes chaotic as Reynolds number increases. © All Right Reserved.

关键词： Wakes

来源：评论

学校读者我要写书评

暂无评论

Experimental and numerical study on impinging fuel spray under high-pressure cross-flow condition 14

Experimental and numerical study on impinging fuel spray und...

引用

14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018

作者： Si, Z. Guo, M. Ashida, Y. Nishida, K. Ogata, Y. Tang, C. Huang, Z. Department of Mechanical System Engineering University of Hiroshima 1-4-1 Kagamiyama Higashi-Hiroshima739-8527 Japan School of Mechanical and Electronic Engineering Wuhan University of Technology 122 Luoshi road Wuhan Hubei430070 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University 28 Xianning west road Xi'an710049 China

It is certified that the fuel spray is strongly affected by both in-cylinder air flow and piston cavity wall impingement in a direct injection engine. In this study, sprays injected by a valve covered orifice nozzle were tested by a high-speed video camera and a continuous wave laser sheet under a wind-tunnel with cross-flow and pressurized ambience, thereby the spray profiles in vertical and horizontal planes were investigated. Moreover, the experiment results were compared with simulations which was calculated by the validated spray models based on the CONVERGE software. With increase in the cross-flow velocity, the spray tip penetration evidently increased, and the increased cross-flow velocity led to an increase in the vortex height because of the enhanced spray dispersion. Furthermore, the high ambient pressure restrains the spray dispersion and leads to smaller spray tip penetration and vortex height. The outlines of spray with same liquid-to-air momentum flux ratio q can agree with each other in the windward side, nevertheless the droplet diffusion under high cross-flow velocity is distinct in the leeside. At the horizontal plane of y=25mm, a complex vortex movement was observed that resulted in a nonuniform distribution of droplets in the upper part of the spray in the leeward side. From the calculations, in the radial region apart from the impingement point (8mm4mm) hardly moved. © 2018 Solar Turbines Incorporated.

关键词： Continuous wave lasers

来源：评论

学校读者我要写书评

暂无评论

Study on the gasification mechanisms of key intermediates of oily sludge in supercritical water by ReaxFF-MD method

引用

Energy 2025年 330卷

作者： Linhu Li Pai Peng Gaoyun Wang Xujun Li Wen Cao Zhengjun Gong School of Environmental Science and Engineering Southwest Jiaotong University Chengdu 611756 China State Grid Jiangsu Electric Power Co. Ltd. Research Institute Nanjing 211103 China Technical Inspection Center Sinopec Shengli Oilfield Company Dongying 257000 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

Supercritical water gasification has been confirmed as an advanced treatment method for organic waste including oily sludge. As a supplement to our previous studies, molecular dynamics (MD) simulations must be implemented to understand the gasification mechanism thoroughly. Five representative model compounds were selected to investigate the gasification mechanism using ReaxFF-MD method. The molecular evolution of five key intermediates in SCWG was simulated and compared at 3500 K. To overcome the gasification challenge of oily sludge, toluene was selected for further investigation due to its prominent proportion and relatively low reactivity. Simulations were systematically discussed under different temperatures (2500–3500 K) to study the product distribution. It was found that the yields of the main products (H 2 , CO and CO 2 ) continuously increased with reaction time and temperature. The yields of C1-C3, C4-C7 and C7+ increased more rapidly at higher temperature, with the yield of short-chain carbonaceous organics (C1-C3) being significantly higher than that of other carbonaceous organics. The decomposition kinetics of toluene in supercritical water were also analyzed, and the apparent activation energy was 235.22 ± 22.66 kJ⋅mol −1 . Furthermore, four main gasification pathways were identified by tracking molecular animations. This study would provide valuable insights into the transformation characteristics of oily sludge.

关键词： Oily sludge SCWG Kinetics Pathway Toluene Molecular dynamics

来源：评论

学校读者我要写书评

暂无评论

Performance of cone meter for measuring cryogenic fluid considering cavitation

引用

International Journal of Fluid Machinery and Systems 2019年第1期12卷 12-21页

作者： He, Denghui Chang, Zhuang Bai, Bofeng Chen, Senlin Guo, Pengcheng State Key Laboratory of Eco-hydraulic in Northwest Arid Region Xi’an University of Technology NO.5 South Jinhua Road Xi’an710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University No.28 Xianning West Road Xi’an710049 China

The performance of the cone meter when measuring the cryogenic fluid was investigated by numerical simulation. The results show that the discharge coefficient and pressure loss coefficient of the cone meter are almost constant when the Reynolds number in the "stable region". The cryogenic fluids, especially the liquid hydrogen, have wider stable Reynolds number ranges than the water. There is little effect of cavitation on the discharge coefficient and pressure loss coefficient at the initial stage of cavitation. Thus the effect of slight cavitation on the measurement error of the flow rate is small, whose relative error is less than ±0.5% in present cases. This study opens a new avenue for measuring the flow rate of the cryogenic fluid. © 2019, Turbomachinery Society of Japan. All rights reserved.

关键词： Cavitation

来源：评论

学校读者我要写书评

暂无评论

An optimal design of the widths of heat affect zone, fusion zone, and near interface zone in a dissimilar metal welded joint

Material Design and Processing Communications

引用

Material Design and Processing Communications 2020年第5期2卷

作者： Guo, Guoliang Yang, Jie Wang, Lei Liu, Guiqiu Zhang, Baozhong Zhang, Sihan Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai China Consumer Appliances Centre Shandong Product Quality Inspection Research Institute Shandong China

The optimal design of the dissimilar metal welded joint is a valuable research issue, whether optimize the material, processing technology, dimension, or anything else. The fracture behavior of the dissimilar metal welded joint have been found affected by the widths of heat affect zone, fusion zone, and near interface zone. In this study, the optimal design of the widths of heat affect zone, fusion zone, and near interface zone in the dissimilar metal welded joint was further studied systematically. Firstly, a dissimilar metal welded joint, which used in the nuclear power plants with either heat affect zone crack or fusion zone crack, was selected, and a width mismatch coefficient MW was defined. In addition, the crack propagation paths and J-resistance curves of the dissimilar metal welded joints under different MW induced by the widths of heat affect zone, fusion zone, and near interface zone were calculated. Based on the obtained results, the widths of heat affect zone, fusion zone, and near interface zone were optimized. This study will provide support for the design of the dissimilar metal welded joint and is significant to the structure integrity assessment of the nuclear power plants. © 2019 John Wiley & Sons, Ltd.

关键词： Nuclear fuels

来源：评论

学校读者我要写书评

暂无评论

flow prediction of heterogeneous nanoporous media based on physical information neural network

Gas Science and Engineering

引用

Gas Science and engineering 2024年 125卷

作者： Liang Zhou Hai Sun Dongyan Fan Lei Zhang Gloire Imani Shuaishi Fu Yongfei Yang Kai Zhang Jun Yao National Key Laboratory of Deep Oil and Gas China University of Petroleum (East China) Qingdao 266580 PR China Research Center of Multiphase Flow in Porous Media School of Petroleum Engineering China University of Petroleum (East China) Qingdao 266580 PR China

The simulation and prediction of fluid flow in porous media play a profoundly significant role in today's scientific and engineering domains, particularly in gaining a deeper understanding of phenomena such as the migration and fluid flow in underground rock formations and the enhancement of oil recovery rates. The flow of fluids in nanoscale porous media requires consideration of the effects of microscale phenomena, which are challenging to accurately describe using traditional physical models. Currently, research in deep learning for porous media predominantly focuses on conventional porous media, and there is an urgent need for investigations into heterogeneous nanoporous media. Simultaneously, there is a necessity to overcome the limitations of traditional data-driven models lacking physical prior knowledge. Therefore, the integration of physics-informed neural networks, which combine deep learning with physical principles, becomes essential for inferring relatively accurate results from sparse data. In this work, based on the heterogeneity of porous media in shale, we have introduced a deep learning model that couples physical information to predict the flow in heterogeneous nanoscale porous media. In the Physical Information Neural Network model, we utilize point clouds and couple them with deep residual networks. Discrete sampling points are used as inputs, and a multi-level residual connection, along with dimension concatenation, is employed to fuse feature information. The network, through backpropagation, takes into account the Navier-Stokes equations and wall conditions in heterogeneous nanoscale porous media. The results indicate that the apparent permeability and pressure field accuracy are over 90% and 95%, respectively. The Physical Information Neural Network demonstrates promising prospects for predicting flow in nanoscale porous media. Future work will extend to the multiphase complex flow in three-dimensional porous media.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Investigation of curvature statistics of turbulent premixed Bunsen flames based on leading points concept 12

Investigation of curvature statistics of turbulent premixed ...

引用

12th Asia-Pacific Conference on Combustion, ASPACC 2019

作者： Zhang, Weijie Wang, Jinhua Xia, Hao Lin, Wenjun Zhang, Meng Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No. 28 Xian Ning Road Beilin District Xi'an Shaanxi710049 China

In previous studies, it was showed that the leading point, namely, the positively curved flame front, may be vital in controlling the propagation of flame, thus controlling the burning intensity of turbulent premixed flames. This paper is aimed at investigating the morphologies of the leading points under low and relatively high turbulence intensities based on flame curvature statistics. Premixed C3H8/H2/air flames were obtained with a Bunsen burner. Flame front was captured with OH-PLIF technique. The results show prevalent leading points with positive curvatures at low turbulence intensity. Percentage of positive curvatures were observed to increase at lower turbulence intensity. However, with increasing turbulence intensity, such feature can be mitigated or even overpowered with equal probability of negative and positive curvatures. Proper models for leading point are recommended according to the experimental results. However, question remains as to the underlying mechanism of leading point concept. © Asia-Pacific Conference on Combustion, ASPACC *** right reserved.

关键词： Combustion

来源：评论

学校读者我要写书评

暂无评论

Failure Analysis of Tube-Burst on T91 Platen Superheater of 600 MW Supercritical Boiler

Failure Analysis of Tube-Burst on T91 Platen Superheater of ...

引用

Artificial Intelligence and Electromechanical Automation (AIEA), International Conference on

作者： Ke Sun Jia'an Wang Yu Yan Jiahao Jiang Lei Deng State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an China China Huadian Electric Power Research Institute Co. Ltd. Hangzhou China

ISBN: (数字)9781728182889

ISBN: (纸本)9781728182896

In this paper, the specimen of the bursting tubes, original tube and oxide-like debris are analysed in-depth by macroscopic examination, chemical composition analysis, mechanical properties, metallographic examination, scanning electron microscopy and energy spectrum analysis etc.,. It shows that the main reason for the tube-burst is that the original oxide matters or time-original oxide matters blocks the tube, reducing the cooling effect of the steam, and resulting in a short-term overheating of the tube. It is recommended to control the internal cleanliness of boiler equipment and pipest.

关键词： component tube burst failure analysis oxide matters over temperature FAILURE ANALYSIS excess temperature platen superheater Energy Dispersive X-Ray Spectroscopy oxides Cooling effects tube reducing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：