检索结果-内蒙古大学图书馆

AIR-CUSHION LANDING CRAFT NAVIGATION

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

A computer-MODEL FOR SHIPBOARD ENERGY ANALYSIS

引用

NAVAL ENGINEERS JOURNAL 1984年第5期96卷 33-45页

作者： DETOLLA, JP FLEMING, JR Joseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1

In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

EXTENSION AND APPLICATION OF SHIP DESIGN OPTIMIZATION CODE (SHIPDOC)

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 177-190页

作者： RICHARDSON, WM WHITE, WN William M:. Richardsonhas been employed as a naval architect in the Surface Effect Ship Division of the David Taylor Naval Ship Research and Development Center (DTNSRDC) where he has worked since 1975 in the areas of SES structural loads estimation and optimal ship design. Upon first coming to DTNSRDC he worked in the Ship Dynamics Simulation Branch on ACV submarine and hydrofoil simulations. While at Mare Island Naval Shipyard (MINS) he was a member of the Engineering Computer Applications Branch where he was responsible for the development of algorithms and programs for the solution of naval architectural problems including ship design flooding effects and submarine overhaul scheduling. Before coming to MINS he was employed as a naval architect in the Hull Scientific Branch of the Boston Naval Shipyard's Design Division. He obtained an B.S. degree in Naval Architecture and Marine Engineering from M.I.T. and is a member of SNAME. William N:. Whiteis a senior naval architect in the Advance Vehicles Branch of the Naval Sea Systems Command where he is responsible for the design of all surface effect ships and air cushion vehicles. Previous to his current assignment he was with PMS-304 the Navy's Surface Effect Ship Project Office. There he was the manager for machinery and system integration for the 3000 ton SES acquisition program. His earliest advanced ship experience was acquired while employed by the David Taylor Naval Ship Research and Development Center starting in 1970. Here he worked on the Navy's hydrofoil and air cushion vehicle programs. Mr. White started his career as a student trainee at the Boston Naval Shipyard in 1961 and transferred to Mare Island Naval Shipyard in 1964 where he worked on the Navy's Polaris program. He graduated from the University of Michigan with a Master's Degree in Naval Architecture and is a member of the SNAME and ASNE.

An existing nonlinear ship design optimization program designated SHIPDOC has been extended and a new surface effect ship (SES) description input file is being developed under the sponsorship of the Naval Sea systems Command's surface ship concept formulation (CONFORM) program. SHIPDOC is currently being used in support of several feasibility and preliminary level SES designs. The program has several novel features including an open-ended, user-created ship description and the potential to model all types of ships both enhanced and conventional, surfaced and submerged. This capability has been combined with a nonlinear optimization algorithm that solves for the minimum weight ship subject to user controlled constraints. This paper presents a brief overall description of SHIPDOC and its current capabilities followed by a synopsis of ship types, both surface and submerged, which have been designed with the program in order to illustrate SHIPDOC's practical design capability.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RATIONALE FOR AN ADA SOFTWARE engineering ENVIRONMENT FOR NAVY MISSION CRITICAL APPLICATIONS

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 133-145页

作者： PAIGE, KK CONVERSE, RA USN LCdr. Kathleen K. Paige USN:graduated with a BA from the University of New Hampshire in 1970. She received her commission from Officer Candidate School in April 1971 and performed her first tour of duty with VFP-63 NAS Miramar. LCdr. Paige then received her MS from the Naval Post Graduate School in June 1976 and returned to San Diego to serve as Head Support Software Division at the Fleet Combat Direction System Support Activity. In May 1981 she reported to NA VSEA (PMS-408) where she served initially as Chairman of the NAVMAT Software Engineering Environment Working Group. She has been assigned as Deputy AN/UYK-43 Acquisition Manager since October 1981. LCdr. Paige was designated a fully qualified Engineering Duty Officer in December 1983. Robert A. Converse:is presently the Acquisition Manager for the Ada Language System/Navy (ALS/N) for the Naval Sea Systems Command Tactical Embedded Computer Resources Project. As such he is responsible for the definition and development of the ALS/N to be provided as a Navy standard computer programming system for Navy mission critical applications. Mr. Converse received a Bachelor of Science degree in Physics from Wheaton College Wheaton II. He spent fourteen years with the Naval Underwater Systems Center Newport Rhode Island during which time he designed and developed the Fortran compiler for the Navy Standard AN/UYK-7 computer. Also during that period he received a Master of Science degree in Computer Science from the University of Rhode Island. His thesis for that degree was entitled “Optimization Techniques for the NUSC Fortran Cross-Compiler”. Mr. Converse started his involvement with the Ada program in 1975 with the initial “Strawman” requirements review. Subsequently he was named as the Navy Ada Distinguished Reviewer and was intimately involved in the selection and refinement of the Ada language as it evolved to become ANSI/MIL-STD-1815A.

The U.S. Navy introduced the use of digital computers in mission critical applications over a quarter of a century ago. Today, virtually every system in the current and planned Navy inventory makes extensive use of computer technology. computers embedded in mission critical Navy systems are integral to our strategic and tactical defense capabilities. Thus, the military power of the U.S. Navy is inextricably tied to the use of programmable digital computers. The computer program is the essential element that embodies the system “intelligence”. In addition, it provides the flexibility to respond to changing threats and requirements. However, this very flexibility and capability poses a host of difficulties hindering full realization of the advantages. This paper describes the lessons learned about computer program development over the past twenty five years and discusses a software engineering process that addresses these lessons. It then describes how Ada and its related Ada programming Support and Run-Time Environments foster this software engineering process to improve computer program productivity and achieve greater system reliability and adaptibility. Finally, the paper discusses how the use of Ada and its environments can enhance the interoperability and transferability of computer programs among Navy projects and significantly reduce overall life cycle costs for Navy mission critical computer programs.

关键词：

来源：评论

学校读者我要写书评

暂无评论

HUMAN-FACTORS CONSIDERATIONS APPLIED TO OPERATIONS OF THE FFG-8 AND LAMPS MK III

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 191-199页

作者： BAITIS, AE APPLEBEE, TR MCNAMARA, TM A. Erich Baitis: a native of Germany came to the David W. Taylor Naval Ship R&D Center in 1957 as a cooperative student/trainee and received his B.S. degree in physics from Virginia Polytechnic Institute. As a 32-year-old naval architect in 1971 he received both the Vietnam Honor Service Medal and the Navy's Meritorious Civilian Service Award for his eight months as liaison with the Vietnamese Navy's ferro-cement program. As head of the Seakeeping and Stabilization Group of the Surface Ship Dynamics Branch his work has led to the development of a new standard Ship Motion Computer Program and the application of ship motions to ship habitability operability and survivability problems. A major area of this work has been the ship-aircraft interface which is particularly sensitive to ship motions wind and other environmental factors. He is a member of the American Society of Naval Engineers and was awarded the Solberg Award for 1982 “in recognition of significant engineering research and development contributions in the area of improved helicopter operations from a ship in a seaway.” Terrence A. Applebee:is currently a naval architect at the David W. Taylor Naval Ship R&D Center in the Surface Ship Dynamics Branch. he came to the Center after earning a B.S. degree in ocean engineering from Florida Institute of Technology in 1973. Since that time he has worked in the areas of seakeeping performance evaluation ship-helicopter interfacing and human factor considerations. He is a member of the American Society of Naval Engineers and the Society of Naval Architects and Marine Engineers. Thomas M. McNamara:is an employee of the John Hopkins University Applied Physics Laboratory in the ocean data acquisition program. From 1979 to 1983 he worked at David W. Taylor Naval Ship R&D Center in the Surface Ship Dynamics Branch. His expertise has focused on the development of computer models for human factor evaluations as well as motion stabilization systems. He has participated in the development of advanced stabilizat

The FFG 7/LAMPS MK III Operator Guidance Manual (OGM) was developed for all FFG-7 class frigates which are not fin stabilized or are operating with the fins off. The OGM was developed to assis the ship operators of the FFG-7 class in choosing ship speed and heading combinations which will minimize ship motion-related problems during various phases of the LAMPS deployment. Crew safety and performance were major concerns in the development of the OGM. This paper reviews the effect of human factors on ship operations during helicopter recovery, maintenance, and transit to and from the hangar.

关键词：

来源：评论

学校读者我要写书评

暂无评论

ARCTIC TRAFFICABILITY program - A REVIEW

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 169-175页

作者： VOELKER, R GLEN, IF SEIBOLD, F BAYLY, I Richard Voelker:is Vice President of ARCTEC Incorporated a firm specializing in cold regions technology. He has been responsible for the management of thePolarClass Traffic-ability Program since its inception and annually participates in the field data collection in the Arctic. His prior experience includes positions with the U.S. Coast Guard in the icebreaker design project the Military Sealift Command and at Newport News Shipbuilding. He is a graduate of N. Y.S. Maritime College and has a MS degree from the University of Michigan. I.F. Glen:received his professional degrees in naval architecture from the Royal Naval Engineering College Manadon Plymouth and RN College Greenwich London entering the Royal Corps of Naval Constructors in 1967. After serving as a Constructor Lieutenant in the Royal Navy's Far East Fleet for a short period he joined the Polaris submarine project team in Bath England in 1968. In 1971 he was seconded to the Canadian Department of National Defense in Ottawa as a Constructor Lieutenant Commander under NATO exchange arrangements where he had responsibilities initially for conventional submarines and latterly for computer aided conceptual design. He ventured to Bath England in 1974 and joined Forward Design Group. In 1975 he took a position as a civilian engineer in the Canadian Defense Department and was Head of Hull Systems Engineering from 1977 to 1979. He joined ARCTEC CANADA LIMITED in 1980 and in addition to managing ice model testing projects and full scale trials has specialized in structural response of ships to ice impact. He headed ARCTEC's Kanata Laboratory from 1981 to 1983 when he was promoted to president. Frederick Seibold:is a research program manager with the Maritime Administration's Office of Advanced Ship Development and Technology. He is responsible for the marine science program which includes research in the areas of ship powering structures and propeller performance and Arctic technology. Mr. Seibold has been employed by Mar Ad since 1961 having hel

This paper describes a multiyear program to make an operational assessment on the feasibility of a year-round Arctic marine transportation system to serve Alaska. Specifically, the three objectives were to: collect meteorological and ice data along potential marine routes; instrument the hull and propulsion machinery to improve design critera for ice-worthy ships; and demonstrate that ships can operate in midwinter Alaskan Arctic ice conditions. The U.S. Coast Guard's Polar class icebreakers were used to make the operational assessment by annually extending the route northward and by operating throughout the winter season. This paper reviews some of the operational and technical achievements to date, as well as plans for future Arctic deployments.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RETROFITTING OF BULBOUS BOWS ON UNITED-STATES NAVY AUXILIARY AND AMPHIBIOUS WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1984年第6期96卷 40-51页

作者： CHUN, SK HOUGH, JJ ENGLE, AH FUNG, SC Stephen K. Chunis a graduate of the Maritime College of the State University of New York class of 1981 from which he received a B.E. degree in naval architecture and his license as a Third Assistant Engineer from the U.S. Coast Guard. Since graduation he has worked for the U.S. Navy as a naval architect with the Hull Form and Hydrodynamics Performance Division (SEA 55W3) of the Naval Sea Systems Command. Currently he is the task leader for hydrodynamic design for the DDG-51. He is also responsible for bulbous bow and appendage design for surf ace ships. Mr. Chun is a member of ASNE SNAME and ASE. Jeffrey J. Hough:is currently a naval architect with the Hull Form and Hydrodynamic Performance Division (SEA 55VV3) of the Naval Sea Systems Command (NA VSEA). In his current capacity he is a member of the Surface Ship Hydrodynamics Branch and is the divisional coordinator for computer supported design (CSD) technical director for the hull form design system (HFDS) Hull Engineering Group (SEA 55) assistant coordinator for CSD SEA 55 CSD coordinator for the DDG-51 contract design and SEA 55W3 project engineer for aircraft carrier/aviation support ship hydrodynamics. Mr. Hough received his B.S.E. degree in naval architecture and marine engineering in 1978 and his M.S.E. degree in naval architecture and marine engineering in 1979 from the University of Michigan. He began his career with the U.S. Navy in 1979 as an Engineer-in-Training in the Ship Design and Integration Directorate of NAVSEA. Prior to his current assignment Mr. Hough was the technical director responsible for the hull form and hydrodynamics energy conservation program and technical specialist for design practices for resistance and powering margins and hull form geometry. A member of ASNE since 1979 Mr. Hough is also a member of SNAME ASE and the U.S. Naval Institute. Allen H. Engleis a naval architect with the Hull Form Design and Performance Division of the Naval Sea Systems Command. He received his B.S. degree in engineering science from th

To meet energy conservation goals of the U.S. Navy, its attention has been focused on ways to reduce individual ship total resistance and powering requirements. One possible method of improving ship powering characteristics is by modifying existing individual ship hulls with the addition of bulbous bows. This paper will identify the merits of retrofitting bow bulbs on selected U.S. Navy auxiliary and amphibious warfare ships. A procedure for performing a cost-benefit analysis will be shown for candidate ship classes. An example of this technique for an amphibious warfare ship will also be provided. A brief discussion of future methods to be used for bulbous bow design such as application of systematic model test data and numerical hydrodynamic techniques will be given.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design System (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE NO FRAME CONCEPT - ITS IMPACT ON SHIPYARD COST

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 218-232页

作者： NAPPI, NS WALZ, RW WIERNICKI, CJ Natale S. Nappi:graduated from City College of New York in 1954 with a B.S. degree in civil engineering and received his M.S. in civil engineering from the Polytechnic Institute of Brooklyn in 1959. He began his professional career in 1954 at the New York Naval Shipyard as a naval architect (structures) performing detail structural design and fabrication studies for CVAs LPDs DDs and CGs and eventually became a supervisory naval architect (structures). From 1965 to 1973 he was a member of the staff of the Computer-Aided Design Division at the David Taylor Naval Ship Research and Development Center (DTNSRDC). As such he was involved in the development of the computer structural design tool the SSDP (in association with Frank M. Lev) and automated detail design programs (CASDOS). His current position is Senior Naval Architect Consultant in the structural integrity group of the Ship Structures Division Structures Department DTNSRDC. Mr. Nappi is the author and co-author of numerous technical papers and reports covering a wide spectrum of topics such as automated structural design process design for producibility and survivability material weight and cost trade-off studies and structural weight determination for high performance ships (i.e. SES SWATH HYSWAS). He has lectured on the subjects of design for survivability and ship structures at the Naval Post Graduate School and MIT. He is a member of ASNE ASCE U.S. Naval Institute Sigma Xi and is a registered Professional Engineer in the State of New York. Mr. Nappi was a member of the NAVSEA working commitee for the computer supported design planning effort and is currently a member of the DTNSRDC ASSET Advisory Committee. Ronald W. Walz:graduated in 1974 from Pennsylvania State University with a B.S. degree in civil engineering. He began his professional career in 1974 at the David Taylor Naval Ship Research and Development Center as a structural engineer in the structural design concepts group of the Ship Structures Division Structures Department.

A proposed cost effective alternative to current U.S. Navy structurally configured hulls is presented in this paper. This proposed design for producibility concept involves the elimination of structural stanchions and transverse web frames. The potential impact of this “no frame” concept on structural design, weight and construction and material costs for naval surface frigates and destroyers is reflected in 1) reduced costs for the installation of distributive systems and 2) a reduced number and complexity of structural details providing a more reliable and less costly structure. This study was performed in three parts: 1) Determine the most feasible length between bulkheads without frames; 2) Using this length perform detail weight studies and construction and material costs analysis comparison on a 72-foot long hull module, with and without frames, for a FFG-7, and 3) Estimate the saving in man hours of labor on the installation of distributive systems and shipfitting for an FFG-7. For the feasible length studies on the “no frame” structural configuration, thirty-seven strength, weight and vertical center of gravity studies were performed on two ship classes; twenty-two on the FFG-7 class and fifteen on the DD-963 class. The detailed weight studies and construction and material cost analyses were conducted for FFG-7 “no frame” and “as built” modules. Results indicating the “no frame” concept module was 6.8% heavier and 14.8% less costly than the “as built” module. For the impact of an FFG-7 “no frame” structurally configured hull on the cost of labor required for the installation of distributive systems and for other functional work such as ship fitting, welding, and electrical, this study indicated a reduction of 169,206 labor hours per ship, representing 7.12% of the total required man hours to fabricate an FFG-7 class ship. With the employment of the “no frame” concept, certain areas of significant concern and potential risk were addressed. These include: 1) t

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE “JIMMIE” HAMILTON AWARD FOR 1983

引用

Naval Engineers Journal 1984年第4期96卷

作者： CAPT. JAMES KEHOE JR. KENNETH S. BROWER EDWARD N. COMSTOCK USN (RET.) Captain James W. Kehoe Jr. USN (Ret:.) is well known for his work in conducting comparative naval architecture studies of U.S. and foreign warships design practices for which he received the ASNE Gold Medal for 1981 and the Legion of Merit. He is currently a partner in Spectrum Associates Incorporated Arlington Virginia where he engaged in the feasibility and concept design of naval ships and in continuing his comparative engineering analyses of U.S. and foreign warships. Prior to his retirement from the U.S. Navy in 1982 his naval career involved sea duty aboard three destroyers and three aircraft carriers including command of the USSJohn R. Pierce(DD-753) and engineer officer of the USSWasp(CVS-18). Ashore he had duty at the Naval Sea Systems Command where he directed the Comparative Naval Architecture Program as an instructor in project management in the Polaris missile project and as a nuclear weapons officer. A frequent contributor to theNaval Engineers Journal U.S. Naval Institute Proceedings and theInternational Defense Review he has published a number of articles on U.S. Soviet and other foreign design practices and the effects of design practices on ship size and cost. He has been a member of ASNE since 1974. Kenneth S. Brower:is a partner in Spectrum Associates Incorporated Arlington Virginia which he founded in June 1978. He graduated from the University of Michigan in 1965 with a Bachelor's Degree in Naval Architecture. Mr. Brower has contributed to the design and construction of numerous merchant ships and warships the latter of which include the CG-47 Project Arapaho (in both cases as feasibility design manager) the FDL and DX projects and the new NATO Frigate Replacement for the 90s DDGX and FFX projects. He conceived and directed the development of several frigates and corvettes for foreign military sales. Mr. Brower directed the development of unique reverse engineering ship design computer models and the development of Spectrum Associates' own keel-up Ship Desi

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：