检索结果-内蒙古大学图书馆

Definition of evaluation criteria for system development acquisition modeling and simulation

NAVAL ENGINEERS JOURNAL 1999年第1期111卷 55-64页

作者： Leite, MJ Mensh, DR Michael J. Leite:is a Principal Engineer with PRC Inc. a division of Litton Industries. He supports combat system engineering for theater air and missile defense. His other tasks have included the command and control for the AEGIS shipbuilding program systems engineering for the 21st Century Surface Combatant combat system survivability and the development of NATO standardization agreements for naval ordnance. He was previously a Senior Engineer with San Diego Gas & Electric with responsibility for its energy application and lighting programs. Prior to joining SDG&E Mr. Leite was a commissioned officer in the U.S. Navy where he served in operations and engineering assignments. Following active duty he accepted a Naval Reserve commission and has retired with the rank of Captain. His assignments included command operational and engineering tours. Mr. Leite has also served as an expert witness in admiralty and engineering matters. He is a gradate of the University of California Berkeley with a Bachelor of Science Degree in Engineering and also holds a Masters Degree in Business Administration from National University in San Diego. Mr. Leite is a Registered Professional Engineer in the States of California and Minnesota. Mr. Leite is a member of ASNE ASCE MORS the Illuminating Engineering Society and the U.S. Naval institute. Dennis Roy Mensh:is a Senior Engineer with PRC Inc. a division of Litton Industries in Crystal City VA where he supports modeling and simulation tasking for combat systems. He received BS and MS degrees in applied Physics from Lopola College in Baltimore MD and the American University in Washington DC. He has also completed the course work towards a Ph.D. degree in computer science specializing in the fields of Operations Reseurch Anabsis Systems Analysis and Computer Modeling and Simulation. Previously he was employed at the White Oak Laboratory of the Naval Surface Warfare Carter in Silver Spring MD where he worked in the areas of naval sensor and weapon system analysis

This paper defines, develops and examines a set of generic analysis tools that can be applied to Models and Simulations at the Systems Engineering level of fidelity. The tools examine the performance and effectiveness of Sensors;Weapons;and Battle Management, Command, Control, Communications, computers, and Intelligence ((BMCI)-I-4) systems and equipment. The Measures of Performance (MOPs), Measures of Effectiveness (MOEs) and Measures of Force Effectiveness (MOFEs) were extracted from the Modular Command and Control Structure Paradigm which was developed at the Naval Postgraduate School. The paradigm provides for the development of evaluation criteria (MOPs, MOEs, and MOFEs) in a framework that ensures the traceability of system performance and effectiveness to the system operational requirements as specified in the Operational Requirements Document (ORD). Also, the analysis tools provide insight and valid estimates of numerical measures of the defined system functionality threads, which represent the system's operational requirements as specified in the ORD. The tools are directly transferrable and applicable to test and evaluation exercise events which are conducted in support of the development and acquisition of systems and equipment. Once the levels of system performance have been defined, the Paradigm generates a quantitative database that becomes a useful tool in system tradeoffs and selection. Once the alternative system suites have been defined, the suites can be analyzed in terms of system functionality threads and their corresponding performance capabilities versus cost.

关键词： Naval vessels

来源：评论

学校读者我要写书评

暂无评论

Endogenous growth and the balanced growth equilibrium

引用

research in Economics 1998年第2期52卷 189-212页

作者： Asada, Toichiro Semmler, Willi Novak, Andreas J. Faculty of Economics Chuo University Tokyo Japan Graduate Faculty Department of Economics New School for Social Research New York NY 10003 65 Fifth Avenue United States Department of Statistics Operations Research/Computer Science University of Vienna A-1010 Vienna Universitätsstrasse 5/9 Austria

This paper shows that the Romer (1990) Journal of Political Economy, 98, 71-102 model of endogenous growth, its version for the social planning problem, has a unique steady state and is saddle path stable. The steady state can be monotonically reached by an appropriate choice of the initial values of the control variables if the initial values of the state variables lie in the vicinity of the steady state. For the original version, as well as for generalizations of it, we demonstrate that Hopf bifurcation can be excluded. We also demonstrate that the market variant of the Romer model as, for example, presented in Benhabib, Peru and Xie (1994) Ricerche Economiche, 48, 279-298, does admit Hopf bifurcation and stable periodic solutions. The technique employed here may be useful in studying other variants of endogenous growth models. © 1998 Academic Press Limited.

关键词： Cycles Endogenous growth Hopf bifurcation

来源：评论

学校读者我要写书评

暂无评论

New approximation techniques for some ordering problems 98

New approximation techniques for some ordering problems

引用

Proceedings of the ninth annual ACM-SIAM symposium on Discrete algorithms

作者： Satish Rao Andréa W. Richa NEC Research Institute NEC Research Institute and DIMACS Graduate Student Program School of Computer Science Carnegie Mellon University Pittsburgh PA

来源：评论

学校读者我要写书评

暂无评论

Applying fuzzy functions and sequential coordination to optimization of machinery arrangement and pipe routing

引用

NAVAL ENGINEERS JOURNAL 1998年第6期110卷 43-54页

作者： Wu, BC Young, GS Schmidt, W Choppella, K Dr. Bi-Chu Wu:received a PhD in Mechanical Engineering from the University of Maryland College Park in 1991. She has worked on projects involving naval architecture design optimization solid mechanics and database development. Presently a senwr engineer with Angle Incorporated Dr Wu's research interests are in design optimization and fuzzy logic applications. Dr. Gin-Shu Young: a senior engineer with Angle Incorporated holds a PhD in Mechanical Engineering from the University of Maryland College Park. As a guest researcher with National Institute of Standards and Technologies from 1990 to 1993 he worked on vision-based navigation for autonomous vehicles. His experience also includes applications of optimization fuzzy logic neural network and genetic algorithm methods to engineering system design Mr. William Schmidt:co-founded Angle Incorporated in 1990 and has served as Vice PresidentlChiefScientist during this tame. He holds a B.Sc. in Applied Science from the Naval Acadt?my and an M.Sc. in Physics from the Naval Post Graduate School. He has cner 20 years experience in technical leadership material and personnel management. He has led the application of computer aided design (CAD) and Product Model Information Exchange to the shipbuilding industry. His experience also includes leading the amlication of model based operational analysis to support the Live Fire Test Program for DDG 51 Class Destroyers. Mr. Krishna M. Choppella:is a Sofware Engineer at Eidea Laboratories Incotporated where he works on componentbased distributed enterpvise frameworks. He has been involved in creating data analysis tools for the US Nay by integrating CAD modeis databases and graphical front ends. His work in the Masters degree program in Mechanical Engineering at the University of Texas at Austin was in di0ddase.r spectroscopy of combustion products in porous-matri burners. He received his Bachelors degree in Electrical Engineering in India. He was a Research Associate at the Centre for Laser Technology and Project Engi

Ship design is often multidisciplinary involving several design elements with various types of objectives and constraints (O/C) some easily described as mathematical formulas, others better modeled as descriptive assertions. This paper describes a method based on fuzzy functions and an integrated performance index to model O/C using descriptive assertions to be used with mathematical formulas in optimization. Another issue addressed in this paper concerns the coordination of design elements when sequentially coupled, that is, when one leads the other and the performance of the follower depends greatly on the design of the leader. Based on neuro-fuzzy techniques, the method described here coordinates and optimizes sequentially coupled elements. The two methods are applied to machinery arrangement (MA) and pipe routing (PR). Preliminary models for optimization of MA and PR are described considering convenience, producibility: engine room size, interference and location as factors in the O/C set. Some test results from MA/PR applications are presented and discussed. The methods are generic and can be extended to other elements in ship design. They are mutually independent and may be used separately Two advantages of their use are an improvement in overall performance and a reduction in the need for redesign of elements.

关键词： Optimization

来源：评论

学校读者我要写书评

暂无评论

Analysis of product codes for frequency-hopped spread-spectrum with partial band interference

Analysis of product codes for frequency-hopped spread-spectr...

引用

MILCOM, Military Communications Conference

作者： T.C. Nolan W.E. Stark Department of Defense graduate fellowship program Focused Research Initiative agreement Ann Arbor MI USA Department of Electrical Engineering and Computer Science University of Michigan Ann Arbor MI USA

A jamming game is considered. A transmitter encodes the data, in a product code (PC), and transmits it in a slow frequency-hopped spread-spectrum (FHSS) system. A hostile jammer attempts to block correct packet reception by adjusting the fraction of the total band in which it distributes the jam power, /spl rho/. Two cases are considered. In the first case, the transmitter declares his strategy and the jammer uses this information to select his best jamming fraction. In the second case, the jammer declares his strategy first and the transmitter uses this information to select his best rates. Results are obtained using asymptotic analysis of a product code using singly extended Reed-Solomon (RS) row and column codes whose size grows large. This asymptotic analysis leads to good choices of the row and column rates for the PC in both cases.

关键词： Product codes Spread spectrum communication Interference Jamming Decoding Error correction codes Frequency shift keying Error correction Reed-Solomon codes Transmitters

来源：评论

学校读者我要写书评

暂无评论

Empirical testing: The prototyper's evaluation mechanism

引用

NAVAL ENGINEERS JOURNAL 1997年第1期109卷 41-46页

作者： Hafner, AN Arnold N. Hafner Ph.D.:is founder and president of Information Systems Research (ISR). He has twenty-five years of experience in systems development and is published in the field of systems development management. He served as corporate research scientist at Systems Exploration Inc. from 1988 to 1991 program director at Computer Science Corporation from 1983 to 1988 director of operations at Republic Management Systems Corporation from 1981 to 1983 and program manager at Computer Science Corporation from 1972 to 1981. A 1962 graduate of the US. Naval Academy he holds a doctoral degree in human behavior and engineering degrees in electronics and communications. He has taught courses on information systems and systems management at most of the colleges in the San Diego area. Dr. Hafner has presented fourteen refereed research papers while publishing sixteen articles and a book A Manager's Guide to Software System Development.

Evaluating complex systems is the subject of this paper, the third in a series investigating prototyping. It provides an interesting and helpful overview of how to evaluate systems prototypes and outlines the iterative stream of developer-user interactions that is replacing older approaches to testing and evaluating new military systems, which promise to reduce the time required to develop and field future military capabilities. Changes to the acquisition process, such as those the paper sketches, will facilitate the nation's rapid transit through its current revolution in military affairs.

关键词： Systems analysis

来源：评论

学校读者我要写书评

暂无评论

Operational systems, logistics engineering and technology insertion

引用

NAVAL ENGINEERS JOURNAL 1997年第3期109卷 205-220页

作者： Grubb, MJ Skolnick, A Michael J. Grubb:has perfomzed naval engineering at the Crane Division Naval Surface Warfare Center (NSWC) for more than twenty-five years. He currently the program manager for the Sustainable Hardware and Affordable Readiness Practice Program (SHARP). is a Navy-wide logistics research and development prgram aimed at the successful transiton of proved technologies inot the fleet. SHARP focuses on reducing acquisition performance capability reliability maintainability and readiness of these systems. Mr. Grubb has served as a department director for the past eleven years. His most recent assignment was as director of the Tactical Computer Resources and Test Equipment Department. This organization provided acquisition and in-service engineering support of the Navy's tectical embedded computers priphirals displays and mass memory storage devices. The organization also provided a complete range of product engineering and metrology engineerig services for SSP NevSeaSysCom and the Trident Program. Prior to this appointment Mr. Grubb was deptuy director psysical security programs department and site responsible for program management and system integration of ashore integrated security systems. Mr. Grubb holds a B.S. degree in industrial engineering from Iowa State Universtiy an M.S. degree in industrial engineering from Purdue University and has copleted the course work (Dec.'96 for a master's degree in public and environment affairs at Indiana University-Purdue Univeristy Indianapolis. Dr. Alfred Skolnick operates System Science Consultants (SSC) specilizing in strategic planning technical program definiton technology assessment and engineering analyses on selected matters of national interest. He has taught physics mathematics and management sciences at University of Virginia and Marymount University and is currently adjunct professor of mathematics at Northern Virginia Community College. Form 1985 to 1989 he was president of the American Society of Noval Engineers. Dr. Skolnick served at Applied Physic

In an era of fiscal austerity, downsizing and unforgiving pressure upon human and economic capital, it is an Augean task to identify resources for fresh and creative work. The realities of the day and the practical demands of more immediate fleet needs can often dictate higher priorities. Yet, the Navy must avoid eating its seed corn. Exercising both technical insight and management foresight, the fleet, the R&D community, the Office of the Chief of Naval operations (OpNav) and the product engineering expertise of the Naval Surface Warfare Center (NSWC) are joined and underway with integrated efforts to marry new, fully demonstrated technologies and operational urgencies. Defense funding today cannot sponsor all work that can be mission-justified over the long term because budgets are insufficient to support product maturation within the classical development cycle. However, by rigorous technical filtering and astute engineering of both marketplace capabilities and currently available components, it is possible in a few select cases to compress and, in effect, integrate advanced development (6.3), engineering development (6.4), weapon procurement (WPN), ship construction (SCN), operation and maintenance (O&M,N) budgetary categories when fleet criticalities and technology opportunities can happily meet. In short, 6.3 funds can be applied directly to ''ripe gateways'' so modern technology is inserted into existing troubled or aging systems, sidestepping the lengthy, traditional development cycle and accelerating practical payoffs to recurrent fleet problems. To produce such constructive results has required a remarkable convergence of sponsor prescience and engineering workforce excellence. The paper describes, extensively, the philosophy of approach, transition strategy, polling of fleet needs, technology assessment, and management team requirements. The process for culling and selecting specific candidate tasks for SHARP sponsorship (matching operational need with t

关键词： Naval vessels

来源：评论

学校读者我要写书评

暂无评论

Influence of human engineering on manning levels and human performance on ships

引用

NAVAL ENGINEERS JOURNAL 1997年第5期109卷 67-76页

作者： Anderson, DE Oberman, FR Malone, TB Baker, CC David E. Anderson:has a bachelor of science degree in environmental engineering from Florida Technological University and a master's degree in environmental engineering from the University of Central Florida. He is a graduate of the Naval Sea Systems Command's Engineer-In-Training (EIT) Program. Mr. Anderson was instrumental in introducing the collective protection system (CPS) in the U.S. Navy developing the initial forward-fit package for the USS Gunston Hall and the engineering change proposal (ECP) for the USS Wasp. In 1990 he joined the Human Systems Integration (HSI) Division (SEA 55W5) where he was task leader for auxiliary ships. He is currently the HSI manager for the future technology variant of the SeaLift ship and the future carrier. Association of Scientists and Engineers 33rdAnnual Technical Symposium 26 April 1996. Fred R. Oberman:has B.A. and M.A. degrees from the University of Chicago and Loyola University (experimental psychology) and an M.S. degree in industrial engineering and operations research from Virginia Polytechnic Institute (VPI). He has more than 30 years experience in HSI management planning research analysis design and testing in government and private sector positions. He is currently responsible for NavSea HSI generic research and tool development efforts. He is responsible for Human Engineering Specifications and Standards (Commercial Hypertext) and is the NavSea 03D7 representative on HSI in Performance Specifications and for integration of HSI within Integrated Logistic Support (ILS). He has served as DoD HSI SubTAG chair and member of the Simulation and Modeling Test and Evaluation Display and Control Systems Human Computer Interaction Specifications and Standards and Systems Design Sub Tags as a member of the Society of Naval Architects and Marine Engineers (SNAME) Systems Safety Panel and a member of NATO RSG 14 on man-machine analysis. Thomas B. Malone: CHFEP received a Ph.D. in experimental psychology from Fordham University in 1964. He is president of Carlow

The objectives of Human Engineering (HE) are generally viewed as increasing human performance, reducing human error, enhancing personnel and equipment safety, and reducing training and related personnel costs. There are other benefits that are thoroughly consistent with the direction of the Navy of the future, chief among these is reduction of required numbers of personnel to operate and maintain Navy ships. The Naval research Advisory Committee (NRAC) report on Man-Machine Technology in the Navy estimated that one of the benefits from increased application of man-machine technology to Navy ship design is personnel reduction as well as improving system availability, effectiveness, and safety The objective of this paper is to discuss aspects of the human engineering design of ships and systems that affect manning requirements, and impact human-performance and safety The paper will also discuss how the application of human engineering leads to improved performance, and crew safety, and reduced workload, all of which influence manning levels. Finally, the paper presents a discussion of tools and case studies of good human engineering design practices which reduce manning.

关键词： Human engineering

来源：评论

学校读者我要写书评

暂无评论

PERMUTATION ROUTING AND SORTING ON MESHES WITH ROW AND COLUMN BUSES

引用

Parallel Processing Letters 1995年第1期5卷 63-80页

作者： TORSTEN SUEL Department of Computer Science University of Texas at Austin Austin TX 78712 USA Supported by the Texas Advanced Research Program under Grant Nos. #003658–480 and #003658–461 and by a Schlumberger Graduate Fellowship.

We study the problems of permutation routing and sorting on several models of meshes with fixed and reconfigurable row and column buses. We describe two fast and fairly simple deterministic algorithms for permutation routing on two-dimensional networks, and a more complicated algorithm for multi-dimensional networks. The algorithms are obtained by converting two known off-line routing schemes into deterministic routing algorithms, and they can be implemented on a variety of different models of meshes with buses. We also give a deterministic algorithm for 1–1 sorting whose running time matches that for permutation routing, and another algorithm that matches the bisection lower bound on reconfigurable networks of arbitrary constant dimension.

关键词： Parallel algorithms routing sorting reconfigurable mesh mesh buses

来源：评论

学校读者我要写书评

暂无评论

SHIP SELF-DEFENSE PERFORMANCE ASSESSMENT METHODOLOGY

引用

NAVAL ENGINEERS JOURNAL 1994年第3期106卷 208-219页

作者： POLK, J MCCANTS, T GRABAREK, R James Polk:is currently a principal financial and technical advisor for PRC Inc. He is working in support of PEO (TAD) Ship Self-Defense Program in several areas including performance assessment. He retired from the Navy in 1991 after several years at sea and various material command assignment including command of Caron (DD-970) and Aegis technical director. He is an ASNE Member who has an MS in physics from the Naval Postgraduate School. He graduated from the University of Notre Dame with a BS in civil engineering and earned his commission through the NROTC program there. Thomas H. McCants Jr.:is currently a principal system engineer in the ship defense department of the Naval Surface Warfare Center Dahlgren Division. He is supporting the PEO (TAD) in systems engineering and analysis and is supporting the Office of Naval Research in a 6.2 Ship Self-Defense program. He was previously the lead lab program manager for STANDARD Missile led the Aegis Systems Analysis and T&E organization at NSWC was Phalanx CIWS lead lab program manager and was the air target vulnerability program manager at the Center. In 1977–78 Mr. McCants was the NSAP science advisor to COMOPTEVFOR Norfolk. He graduated from VPI&SU with a BS in aerospace engineering and is pursuing a MS in systems engineering from VPI&SU. Robert Grabarek:is currently an electronics engineer in the requirements and analysis branch of the Ship Self-Defense Program Office. He is a 1981 graduate of the U.S. Naval Academy and served six years on active duty as a surface warfare officer. He has earned his MA in operations research and industrial engineering from VPI&SU.

Robust ship AAW defense capability is a priority requirement that enables Naval Forces to conduct joint expeditionary force operations in littoral environments. As an aid to achieving this capability for all ship classes, the Navy has reorganized its management of ship defense. A major focus of these efforts is the development of a fully automatic, integrated combat system for non-Aegis ships which is based on coordinated detection, control, and hard kill/electronic warfare (HK/EW) engagement functions. A phased approach to attaining this fully integrated capability has been established which includes major element upgrade introduction when technology and budget permit. This paper describes the ship self-defense performance assessment methodology which has been adopted to support the review and decision process for future planning and budgeting. This process is a continuation and refinement of that used to provide data for the Office of the Secretary of Defense Fall 1991 Conventional Systems Committee Ship Self-Defense Review. The performance assessment methodology starts with definition of survivability requirements by ship class, combat system configurations, Anti-Ship Missile threat, and operational scenario. Viable self-defense system element options are then identified. The capability of these options are then characterized for input into ship level performance prediction models. Three partitions of performance prediction modeling are made: hard kill elements only, electronic warfare element only, and integrated HK/EW. The most significant accomplishment of this effort, beyond providing data to support programmatic decision, has been the creation of a truly integrated HK/EW surface ship combat system model that interleaves HK and EW timelines and allows parametric variation to evaluate options. Because of classification, only generic examples of numerical result will be presented. However, the procedures for establishing the modelling process, prioritization of

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：