检索结果-内蒙古大学图书馆

ACQUISITION REFORM ANd BEST PROdUCT PROCUREMENT - AN engineering VIEW

NAVAL ENGINEERS JOURNAL 1994年第6期106卷 41-57页

作者： FISHER, dA SKOLNICK, A He has been involved with several weapon system developments. Among these were the Trident II fire control and navigation systems the BSY-I Anti-Submarine Warfare System and the Navy standard computers (UYK44 and EMSP). He served as manager of the Digital Circuits Engineering Branch and was then appointed as manager of the Automatic Test Equipment (ATE) Technology Division. As manager of the ATE Technology Division he was responsible for the SP-23 Fire Control System Support Project the SP-24 Navigation Project and the Fleet Progressive Maintenance Program (2M/ATE). This Division was responsible for selection and application of electronic product technology and for developing fleet test and repair techniques. He holds a B.S. in Electrical Engineering from the University of Evansville and is currently pursuing a Masters of Public Administration at Indiana University-Purdue University Indianapolis. Dr. Alfred Skolnick:retired from the Navy in 1983 with the rank of captain. He is president of System Science Consultants (SSC) specializing in strategic planning technical program definition technology assessment and engineering analyses on selected matters of national interest. Dr. Skolnick taught mathematics and management sciences at University of Virginia and Marymount University. He is adjunct faculty at Northern Virginia Community College. From 1985 to 1989 he was president of the American Society of Naval Engineers. In the Navy he served at Applied Physics Laboratory/The Johns Hopkins University then aboard USSBoston(CAG-1) and played leading roles in several weapon system developments inertial navigation (Polaris) deep submergence (DSRV) and advanced ship designs (SES). He later was director Combat System Integration Naval Sea Systems Command and head Combat Projects Naval Ship Engineering Center. In 1975 he became a major project manager and led the Navy's High Energy Lasers Program in 1981 he was assigned all Navy Directed Energy Weapons development efforts. He was vice president advanced tech

The military services are being moved in the direction of performance-based specifications and standards. They are being steered against dictating ''how to'' produce an item since such action forecloses on the ability to gain access to components or technology that may have a commercial equivalent. Why should the engineering community embrace the new approach? Aside from the obvious weight of it being approved policy, therefore currently mandated, it warrants examination because it is the correct approach at this time when applied to appropriate products. Military specifications and standards are to be displaced then, by acceptable alternative contractor design solutions. Industry bidders will be allowed to propose the particular design details, permitting procurement flexibility by contractually citing only system level or interface requirements, both physical and functional. Hopefully, this can broaden the industrial base and increase competition with reduced costs to follow. Conceptually, the approach appears both performance-sensible and cost-attractive (there are, of course, consequent risks) but how does implementation proceed? Is it possible to pursue the goals envisioned along paths that are not in themselves experimental? Can the American postulate, minimal loss of life and limb to U.S. military people, continue to be honored? Experience and track record elsewhere imply encouraging possibilities in select situations-useful prospects are identified and discussed in practical terms.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN ARCHITECTURE dESIGN APPROACH FOR LARGE SATELLITE NETWORKS

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第3期12卷 197-210页

作者： COTNER, C INUKAI, T COMSAT World Systems 6560 Rock Spring Drive Bethesda MD 20817 USA. Director Customer Technical Support for COMSAT World Systems. He directs support to U.S. users of the INTELSAT satellite network particularly in the areas of certifying that performance of earth-stations is in accordance with system requirements and in supporting the unique needs of television customers. Mr. Cotner's primary technical interests are earth-station design transmission analysis and high power amplifiers. Mr. Cotner has been with COMSAT for over 25 years. Most recently he served as Director of Technical Liaison and Analysis responsible for much of COMSAT World Systems research and development programme for high-level technical interaction with customers such as AT&T and MCI and for initiatives to improve the quality of international satellite transmission. He has also held technical management positions in COMSAT Laboratories COMSAT General where he was a Division Director Earth Segment Engineering and COMSAT World Systems where he represented the U.S. Signatory on the INTELSAT Board of Governors Technical Advisory Committee for five years. Mr. Cotner is a colonel (retired) in the Signal Corps U.S. Army Reserve where he was assigned to several mobilization positions related to satellite communications including a tour of duty on the Joint Staff. Awarded the degree of B.S.E. (cum-laude) in Electrical Engineering by Princeton University. Mr. Cotner also holds an M.S.E. from Cornell University and is a Commandants List graduate of the U.S. Army Command and General Staff College. He and his wife Sharon live in Silver Spring Maryland. COMSAT Laboratories 22300 COMSAT Drive Clarksburg MD 20871 USA. Received the BS and MS degrees in Communications Engineering from the Tokyo Electrical Engineering College Tokyo Japan and the Ph.D. degree in Electrical Engineering from the City University of New York New York. Dr. Inukai is a Principal Scientist in the Network Technology Division of COMSAT Laboratories. He directs res

designing a world-wide satellite network that consists of hundreds of user sites and thousands of circuit connections is a complex problem, which involves selecting a set of candidate satellites and satellite beams/frequency bands from among numerous existing and planned satellites, evaluation of circuit connectivity, earth-station compatibility and sizing, and estimating transponder loading. The design process may also require assessment of the impact of a different set of satellites and modified user traffic requirements on the space segment, the earth-station types and quantity, and the total system cost. Although a conventional design approach based on link-by-link and site-by-site analysis provides accurate results, it is time-consuming and impractical for developing high-level network architectures in a time-constrained environment. A design technique is proposed which employs a set of rules for satellite network design, in combination with extensive databases of satellite parameters, earth-station parameters and user traffic requirements, to synthesize a network architecture. The technique is particularly useful for performing high-level trade-offs among alternative architectures in terms of space segment requirements, the number and type of earth-stations and overall system cost. Once the desired architecture has been selected, a detailed design may be developed using conventional methods.

关键词： SATELLITE NETWORK dESIGN RULE-BASEd dESIGN FIXEd SATELLITE SERVICES FdMA INTELSAT BANdWIdTH REQUIREMENTS TRANSPONdER CAPACITY

来源：评论

学校读者我要写书评

暂无评论

HYBRId SATELLITE ANd TERRESTRIAL NETWORKS

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第3期12卷 313-327页

作者： CHITRE, dM SHYY, dJ EphREMIdES, A GUPTA, S COMSAT Laboratories 22300 Comsat Drive Clarksburg MD 20871–9475 USA. Received his B.Sc. from the University of Bombay India an M.A. in mathematics from the University of Cambridge U.K. and a Ph.D. in physics from the University of Maryland. He is currently an Associate Executive Director of the Network Technology Division at COMSAT Laboratories. He has been involved in research and development activities in ISDN VSAT networks data communications and network systems and architectures. Prior to his current positions Dr. Chitre was a Principal Scientist in the Network Technology Division at COMSAT Laboratories. Dr. Chitre joined COMSAT Laboratories in 1980. He has made major contributions to the analysis and architecture of data communication ISDN and BISDN via satellite. Dr. Chitre directs and participates in the international and national standards activities in ISDN BISDN and data communication as they apply to satellite communication. He was Chairman of the Working Group on Protocols and Network Timing Function of the CCIR/CCITT Joint Ad Hoc Group on ISDN/Satellite Matters during 1990–1992. Currently he is the Chairman of the Working Group on New Technologies in the ITU Intersector Coordinating Group (ICG) on Satellite Matters. Dr. Chitre was a programme manager during 1990 and 1991 on a contract from INTELSAT on systems studies on satellite communications systems architectures for ISDN and broadband ISDN systems. Currently he is the technical manager of the DoD Contract on ATM via satellite demonstration and the programme manager for the INTELSAT contract on analysis and top-level specification of INTELSAT ISDN subnetworks and SDH compatible transport network. Received the B.S. degree in electrical engineering from national Chiao-Tung University Hsin-Chu Taiwan in 1983 and the M.S. and Ph.D. degrees in electrical engineering from Georgia Institute of Technology Atlanta GA in 1986 and 1990 respectively. From June 1987 to October 1987 he worked for the Department of Neurology Emory Univers

The role of satellite communications in networks that provide new services, such as frame relay and multimedia, is investigated. Both passive and active (on-board switching/processing) satellite systems are considered. Novel techniques are developed for each system to demonstrate, via detailed analysis and simulation, how the communications bandwidth agility of multipoint/broadcast satellite channels, and the on-board switching/processing, makes it feasible to provide these new services via hybrid satellite and terrestrial networks in a resource-efficient manner.

关键词： HYBRId NETWORKS ON-BOARd PROCESSING FRAME RELAY

来源：评论

学校读者我要写书评

暂无评论

PERFORMANCE OF A PRIORITIZEd ON-BOARd BASEBANd SWITCH FOR A MULTISERVICE MULTIBEAM SATELLITE

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第3期12卷 283-297页

作者： BOHM, S ELHAKEEM, AK HACHICHA, M Department of Electrical and Computer Engineering Concordia University 1455 De Maisonneuve Blvd. West Montreal H3A 1M8 Canada Was born in Montreal Canada on 14 September 1966. He received the B. Eng. degree in electrical engineering from Concordia University Montreal Canada in 1989. He is at present completing the M.A.Sc. degree in electrical engineering at Concordia University. (S'75–S'79–M'79–SM'86) received the Ph.D. degree from Southern Methodist University Dallas TX in 1979. He spent the next two years working as a Visiting Professor in Egypt after which he moved to Ottawa Canada in 1982. He assumed teaching and research positions in Carleton and Manitoba Univerities and later moved to Concordia University Montreal Canada in 1983 where he is now a Professor in the Electrical and Computer Engineering Department. He has published numerous papers in IEEE and international journals in the areas of spread spectrum and networking. He is a well-known expert in these areas and serves as a consultant to many companies. His current research interests include wide-band metropolitan networks switching architectures and performance of on-board multibeam satellites acquisitionless CDMA networks code distribution and orthogonalization of CDMA signals responsive congestion control for ATM-based networks ARQ techniques and investigation of the novel SUGAR CDMA systems in fading channels. Dr. Elhakeem is a Senior Member of the Canadian Electrical Engineering Society and Armed Forces Association. He has chaired numerous technical sessions in IEEE Conferences was the Technical Program Chairman for IEEE Montech 1986 Montreal Canada. Dr. Elhakeem is the key guest editor of theIEEE Journal of Selected Areas in Communicationsfor the May June issues 1993 covering CDMA networks. Advanced Technology & Networks VISTAR Telecommunications Inc. Ottawa Ontario K1G 3J4 Canada An Associate Director of Advanced Technology & Networks Group VISTAR Telecommunications Inc. Ottawa Canada. He is also an Adjunct Pr

In this paper, we study the performance of a prioritized on-board baseband switch in conjunction with a multibeam satellite handling integrated services. The services considered for the analysis include voice, video, file transfer and interactive data. The prioritized switch uses both input and output buffering, switch speed-up as well as a two-phase head-of-line resolution algorithm, in order to reduce the buffer loss while maintaining acceptable user delays. The minimum required buffer capacity and switch speed-up for each service in a prioritized environment are found under uniform traffic conditions. It is shown that under uniform traffic conditions, only minimal buffering and switch speed-up are needed even for the lowest priority users. The performance dependence on the switch size is also substantially reduced with head of line resolution and buffering even in a prioritized environment.

关键词： SWITCH ON-BOARd BASEBANd MULTIBEAM PRIORITIZEd HEAd-OF-LINE UNIFORM LOAd SPEEd-UP

来源：评论

学校读者我要写书评

暂无评论

THE CALLING(SM) NETWORK - A GLOBAL WIRELESS COMMUNICATION-SYSTEM

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第1期12卷 45-61页

作者： TUCK, EF PATTERSON, dP STUART, JR LAWRENCE, MH Calling Communications Corporation. 1900 West Garvey Ave South. Suite 200 West Covina CA 91790 USA. Chairman of Calling Communications Corporation. He is also the Managing Director of Kinship Venture Management Inc. the general partner of Kinship Partners 11 and a General Partner of Boundary the general partner of The Boundary Fund. As a venture capitalist he has founded or participated in founding several telecommunications companies including Calling Communications Corporation Magellan Systems Corporation manufactures of Global Positioning System receivers Applied Digital Access manufacturer of DS-3 test access and network performance monitoring equipment Endgate Technology Corporation specialists in satellite phased array antennas and Poynting Systems Corporation. now a division of Reliance Corporation manufacturers of fibre optic transport equipment. He was a founder of Kebby Microwave Corporation where he invented the first solid-state. frequency-modulated commercial microwave link system. The company was acquired by ITT Corporation where he rose to the position of V.P. and Technical Director of ITT North America Telecommunications Inc. Subsequently he was V.P. of Marketing and Engineering at American Telecommunications Inc. (ATC). He was founding Director of American Telecom Inc. a joint venture between ATC and Fujitsu and has served on more than 20 boards of directors including those of three public companies. He has authored articles on microwave engineering and telephone signalling and was a contributor to Reference Data For Radio Engineers. He is a graduate of the University of Missouri at Rolla where he was later awarded an honorary Professional degree and serves on its Academy of Electrical Engineering. Mr Tuck is a Senior Member of the IEEE a Fellow of the Institution of Engineers (Australia) a Professional Member of the AIAA and a registered professional engineer in three states. More than 25 years of experience in the telecommunications industry where he has been responsibl

There is a very large demand for basic telephone service in developing nations, and remote parts of industrialized nations, which cannot be met by conventional wireline and cellular systems. This is the world's largest unserved market. We describe a system which uses recent advances in active phased arrays, fast-packet switching technology, adaptive routeing, and light spacecraft technology, in part based on the work of the Jet Propulsion Laboratory and on recently-declassified work done on the Strategic defense Initiative, to make it possible to address this market with a global telephone network based on a large low-Earth-orbit constellation of identical satellites. A telephone utility can use such a network to provide the same modern basic and enhanced telephone services offered by telephone utilities in the urban centres of fully-industrialized nations. Economies of scale permit capital and operating costs per subscriber low enough to provide a service to all subscribers, regardless of location, at prices comparable to the same services in urban areas of industrialized nations, while generating operating profits great enough to attract the capital needed for its construction. The bandwidth needed to support the capacity needed to gain these economies of scale requires that the system use K(alpha)-band frequencies. This choice of frequencies places unusual constraints on the network design, and in particular forces the use of a large number of satellites. Global demand for basic and enhanced telephone service is great enough to support at least three networks of the size described herein. The volume of advanced components, and services such as launch services, required to construct and replace these networks is sufficient to propel certain industries to market leadership positions in the early 21st Century.

关键词： LOW EARTH ORBIT SATELLITE COMMUNICATIONS FAST PACKET SWITCHING EARTH FIXEd CELLS AdAPTIVE ROUTEING LIGHT SPACECRAFT K(A) BANd phASEd-ARRAY ANTENNAS

来源：评论

学校读者我要写书评

暂无评论

HYdROCARBON VAPOR dIFFUSION IN INTACT CORE SLEEVES

引用

GROUNd WATER MONITORING ANd REMEdIATION 1993年第1期13卷 139-150页

作者： OSTENdORF, dW MOYER, EE XIE, YF RAJAN, RV David W. Ostendorf (Civil Engineering Department University of Massachusetts Amherst MA 01003) is an associate professor in the Environmental Engineering Program of the Civil Engineering Department of the University of Massachusetts at Amherst. His research interests include unconfined aquifer contamination hazardous waste site remediation and analytical modeling of problems in environmental fluid mechanics. Ostendorf is a Registered Professional Engineer in Massachusetts and a member of the American Geophysical Union American Society of Civil Engineers Soil Science Society of America Water Pollution Control Federation and Association of Environmental Engineering Professors as well as the National Ground Water Association. Ellen E. Moyer (Civil Engineering Department University of Massachusetts Amherst MA 01003) is a doctoral candidate in the Environmental Engineering Program of the Civil Engineering Department of the University of Massachusetts at Amherst with an M.S. degree in environmental engineering from that institution. Her research interests include subsurface investigation soil venting bioremediation and analytical modeling of subsurface contamination. She has six years of professional experience managing hazardous waste site investigation and cleanup projects and is a member of the National Ground Water Association and the American Society of Civil Engineers. Yuefeng Xie (Civil Engineering Department University of Massachusetts Amherst MA 01003) is a postdoctoral research associate in the Environmental Engineering Program of the Civil Engineering Department of the University of Massachusetts at Amherst. His research interests include environmental analyses drinking water treatment and the chemical characterization and removal of disinfection by-products. A graduate with a Ph.D. and an M.S. in environmental engineering and a B.S. in chemistry and chemical engineeering from Tsinghua University Beijing China Xie is a member of the American Water Works Association and the Water Poll

The diffusion of 2,2,4-trimethylpentane (TMP) and 2,2,5-trimethylhexane (TMH) vapors out of residually contaminated sandy soil from the U.S. Environmental Protection Agency (EPA) field research site at Traverse City, Michigan, was measured and modeled. The headspace of an intact core sleeve sample was swept with nitrogen gas to simulate the diffusive release of hydrocarbon vapors from residual aviation gasoline in and immediately above the capillary fringe to a soil-venting air flow in the unsaturated zone. The resulting steady-state profile was modeled using existing diffusivity and air porosity estimates in a balance of diffusive flux and a first order source term. The source strength, which was calibrated with the observed flux of 2,2,4-TMP leaving the sleeve, varied with the residual gasoline remaining in the core, but was independent of the headspace sweep flow rate. This finding suggested that lower soil-venting air flow rates were in principle as effective as higher air flow rates in venting LNAPL vapors from contaminated soils. The saturated vapor concentration ratio of 2,2,4-TMP to 2,2,5-TMH decreased from 6.6 to 3.5 over the duration of the experiments in an expression of distillation effects. The vertical profile model was tested against sample port data in four separate experiments for both species, yielding mean errors ranging from 0 to -24 percent in magnitude.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Finite element method in undergraduate engineering education

引用

Computer Applications in engineering Education 1993年第4期1卷 299-299页

作者： Nesbit, S.M. Comer, J.J. Van Gulick, L.A. Department of Mechanical Engineering Lafayette College Easton Pennsylvania 18042-1775 Dr. Steven M. Nesbit:is an assistant professor of Mechanical Engineering at Lafayette College where he has been teaching since 1990. He received his B.S. M.S. and Ph.D. degrees from West Virginia University. His areas of expertise are in mechanical design mechanisms and robotics. Previously he worked as a design engineer for Pratt-Whitney Aircraft. He is a member of ASME and ASEE. Dr. Jess Comer:is an assistant professor of Mechanical Engineering at Lafayette College. He received a B.S. and M.S. in Mechanical Engineering from South Dakota School of Mines and Technology and a Ph.D. from the University of Illinois at Urbana-Champaign. He was a co-author on the text “Fundamentals of Metal Fatigue Analysis” (Prentice-Hall 1990). Dr. Leonard A. Van Gulick:received his B.S. degree in Mechanical Engineering from Newark College of Engineering and his M.A. M.S. and Ph.D. degrees in Aerospace and Mechanical Sciences from Princeton University. He has been a staff engineer in the structural dynamics section at Martin Marietta Aerospace and a staff member in the Design Engineering Division at Los Alamos National Laboratory. Dr. Van Gulick is a professor of Mechanical Engineering at Lafayette College where he has also served as department head and program chair. Finite element analysis of medieval buildings is his primary research interest.

This article describes how the finite element method can be integrated into the education of undergraduate mechanical engineering students. The teaching of finite element theory, the use of commercial software in engineering courses, and the application of the finite element method in the context of mechanical design and analysis are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

VIRTUAL PROTOTYPING USING KNOWLEdGE - BASEd MOdELING ANd SIMULATION TECHNIQUES

引用

NAVAL ENGINEERS JOURNAL 1993年第3期105卷 201-212页

作者： SHEA, JG The Author:holds bachelor and master of engineering degrees in mechanical engineering a M.Eng. in engineering management and is currently fulfilling requirements for the M.S. and Ph.D. degrees in computer science at the University of Louisville. He is employed as program manager Phalanx Advanced Engineering Development at the Naval Ordnance Station Crane Div. NavSurfWarCen Louisville Ky. During his tenure with Phalanx Mr. Shea has contributed to system reliability improvement system performance upgrading and the development of the Phalanx HOL (RISC) Computer. Mr. Shea is a member of ASNE the Institute of Electrical and Electronics Engineers American Institute of Aeronautics and Astronautics Society for Computer Simulation International Test & Evaluation Association and the Military Operations Research Society.

Knowledge-based modeling and simulation bridges the gap between ''conventional'' artificial intelligence implementations (such as expert systems) and more traditional computer-aided design techniques. We are currently developing software, whose primary function is to capture a user-input design specification and produce a ''virtual'' rapid prototvpe in the form of executable rule-based code. This code can then be exercised either as an interactive part of a hardware-in-the-loop testbed simulator or as a component of an object-oriented ''behavioral'' simulation environment. While the phalanx Testbed is the immediate beneficiary of this work, the techniques described have a wide range of application in the modeling of conceptual design and performance characteristics. This paper describes the system architecture and software tools that we are applying to generate virtual rapid prototypes for use in the phalanx Testbed. Particular attention is paid to defining the intelligent knowledge-capture mechanisms and model generation methodologies that we are using to translate design knowledge and performance requirements into rule-based simulations. The object-oriented programming approach to the merging of ''new'' data with previouslv-captured and stored data is discussed, and the issues of verifying and validating prototypes generated using such partiallv ''reengineered'' models are examined. An application currently in use as an investigative prototype for testbed development, a simple position controller servomechanism used to control the azimuth angle of a target-tracking sensor, is used to illustrate the process.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Interactive beam analysis program for engineering education

引用

Computer Applications in engineering Education 1993年第6期1卷 469-469页

作者： Gramoll, K.C. School of Aerospace Engineering Georgia Institute of Technology Atlanta GA 30332-0150 Kurt Gramoll:is currently an assistant professor in the School of Aerospace Engineering at Georgia Institute of Technology. He is also the director of the Aerospace Multimedia Lab where aerospace related courseware is being researched and developed. Since receiving his Ph.D. from Virginia Tech in 1988 he has taught at Memphis State and worked on the Mu series rockets at the Japanese Institute of Space and Astronautical Science in Tokyo. In 1992 he was awarded the Lilly Teaching Fellowship from the Lilly Foundation for his excellence in teaching. Other areas of research and instruction include filament winding of composite pressure vessels and composite spacecraft structures.

This article describes an interactive graphic beam analysis program for undergraduate engineering education that has been used at the Georgia Institute of technology. The program is fully mouse- and menu-driven, and the results, moment, shear, and deflection diagrams, are graphically displayed. The development objectives of the program and how the program has been used effectively to increase the learning and understanding of indeterminate beam structures are discussed. Practical experience with the program in two elementary structures courses is also reviewed. The article shows how graphically oriented programs can be beneficial to the education of first-year engineering students by allowing them to perform “what-if” design scenarios. The program is structured to minimize the time the instructor needs to spend on demonstration in the classroom. The program is free to all educational institutions.

关键词：

来源：评论

学校读者我要写书评

暂无评论

HIGH-ENERGY dENSITY LITHIUM RECHARGEABLE BATTERIES FOR UNdERWATER VEHICLE PROPULSION

引用

NAVAL ENGINEERS JOURNAL 1993年第3期105卷 181-186页

作者： SMITH, ph CHUA, dL FLEISCHMANN, CW JAMES, Sd Patricia H. Smith:is leader of the Battery Research and Development Group in the Electrochemistry Branch of the Naval Surface Warfare Center Dahlgren Division White Oak Detachment She has 12 years experience in exploring and extending electrochemical technology in order to bring safe high energy lithium batteries into widespread naval use. Dr. Smith manages the High Energy Battery Project sponsored by the Office of Naval Research. A major thrust of this Project is developing power sources to propel naval underwater vehicles. Dr. Smith has authored numerous papers on lithium batteries and is presently editor-in-chief of the High Energy Battery Newsletter. She obtained her Ph.D. in inorganic chemistry at the University of Maryland in 1981. David L. Chua:is manager of lithium battery R&D at Alliant Techsystems Inc.-Power Sources Center (formerly Honeywell) Horsham Penn. He is responsible for the research and development of both primary and rechargeable lithium technologies. He earned his M.S. in metallurgical engineering at the University of Arizona in 1969 and a Ph.D. in materials engineering at Rensselaer Polytechnic Institute in 1973. Dr. Chua has over 15 years experience in lithium electrochemical research received 5 patents and authored numerous papers on lithium battery technology. Charles W. Fleischmann: principal chemist Advanced Technology & Research Corp. is consultant to the Battery R&D Group Electrochemistry Branch Naval Surface Warfare Center Dahlgren Division White Oak Detachment. During the past 35 years as a scientist and technical manager mainly in the field of electrochemical energy conversion he has directed R&D departments at Exide Corp. Honeywell Corp. C&D Batteries (Allied Corp.) and was on the technical staffs of Mallory Battery Co. NL Industries Leesona Moos Labs and Lowry Air Force Base Technical Training Center. Schooled in the City of New York he holds a B.S. from Queens College and a Ph.D. from Polytechnic University. Publications and patents: over 35 Stanley D. Jam

The rechargeable lithium/cobalt oxide electrochemistry is examined for its use in powering underwater vehicles. It has been successfullv developed in 30 amp hour capacity cells. A comparative studv with the silver oxide/zinc technology, most frequently used for this application, revealed lithium's superior performance. Lithium/cobalt oxide gave more charge-discharge cycles with 40-50% higher energy density. Lithium's advantage was especiallv marked at -2-degrees-C, where it cycled four times longer than silver cells. Projections indicate that, at the 600 amp hour cell size, the battery will have an energy density of 120 watt hours per pound resulting in a more durable and cost effective power source for naval vehicles than currentlv possible.

关键词： (1) lithium rechargeable battery (2) underwater vehicle power supply

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：