检索结果-内蒙古大学图书馆

An Improvement of Three-Factor Remote User Authentication Protocol Using ECC

International Journal of Network Security 2024年第3期26卷 528-534页

作者： Hwang, Min-Shiang Lin, Cheng-Ying Wu, Chia-Chun Department of Computer Science & Information Engineering Asia University Taichung Taiwan 500 Lioufeng Rd. Wufeng Taichung Taichung 41354 Taiwan Department of Medical Research China Medical University Hospital China Medical University Taiwan Ph.D. Program in Artificial Intelligence Asia University Taichung Taiwan 500 Lioufeng Rd. Wufeng Taichung Taichung 41354 Taiwan Kinmen892 Taiwan

With the development of the Internet, many patients’ private medical data are maliciously stolen by attackers. Therefore, Liu et al. proposed an improved ECC-based three-factor user authentication scheme. The main advantage of their scheme is that it provides the same or better security than other schemes using more secondary keys. However, this article will show that Liu et al.’s scheme is vulnerable to denial of service attacks. In addition, their protocol uses public key cryptography, which is inefficient. Finally, the method is not immune to counterfeit smart card attacks. In this paper, we also improve their protocol from the perspective of practicality and security. © (2024), (International Journal of Network Security). All rights reserved.

关键词： Authentication

来源：评论

学校读者我要写书评

暂无评论

High-Efficiency Microinverter With Interleaved Switching and Asymmetrical Unipolar Modulation

High-Efficiency Microinverter With Interleaved Switching and...

引用

International Future Energy Electronics Conference (IFEEC)

作者： Che-Yu Lu Ming-Yueh Hsieh Department of Electrical Engineering National United University Miaoli Taiwan Ph.D. Program in Materials and Chemical Engineering National United University Miaoli Taiwan

This paper introduces a high-efficiency two-stage power microinverter. In the dc-dc stage, a three-phase interleaved inverse buck-type converter is adopted to regulate the dc-bus voltage and improve the input ripples. A band-stop filter and a PR controller are employed to eliminate the double-line frequency ripple. Furthermore, a highly reliable inverter combines an H-bridge topology and two low-frequency switches. Interleaved switching and asymmetrical unipolar modulation are used to improve conversion efficiency. The high and low switching frequency legs synchronization minimizes distortion on the output voltage waveform. Finally, all control algorithms are implemented in a TI dSP TMS320F28069 chip. A 2 kW prototype utilizing GaN devices has been developed and verified. The average efficiency of the overall system achieves 98%.

关键词：

来源：评论

学校读者我要写书评

暂无评论

design of Quantum dot Color Convertors for Inkjet-Printed Optoelectronic devices: Violet-Converted Full Color Mini-LEd

引用

Advanced materials Technologies 2024年第3期9卷

作者： Lin, Chen-Te Zhuan, Yi-long Jung, Nian-Ting Hoang, Minh-Son Chen, Hsueh-Shih Ph.D. Program in Prospective Functional Materials Industry College of Engineering National Tsing Hua University Hsinchu30013 Taiwan Department of Materials Science and Engineering National Tsing Hua University Hsinchu30013 Taiwan College of Semiconductor Research National Tsing Hua University Hsinchu30013 Taiwan Department of Chemical Engineering & Materials Science College of Engineering Yuan Ze University Taoyuan32003 Taiwan

This study presents a strategy of design and development of inkjet-printable and UV-curable quantum dot (Qd) polymer-based inks and color conversion (CC) film for use in optoelectronic devices. At first, the preparation of a Qd ink is focused on two key aspects, that are Qd chemical compatibility and ink printability. In the hybrid organic–inorganic polymer/Qds system, it must be formulated to a well-dispersed ink, in which a dispersant additive without negative effect on Qds is introduced to enhance the Qd suspension. As the optical density of final dried Qd film is one of the most critical concerns in color conversion, Qd concentration should be as high as possible in the ink, which increases the ink viscosity. Consequently, a trade-off between Qd concentration and the ink viscosity associated with the ink-jetting temperature is considered to ensure the ink printability. Finally, the designed Qd ink is printed as color conversion film on a mini-LEd panel composed of two violet mini-chips to produce red and green emissions, while blue emission directly comes from a blue mini-chip. The final conversion efficiency of QdCC on mini-LEd panel are between 35% and 45%, showing the promising applications in optoelectronic devices. © 2023 Wiley-VCH GmbH.

关键词： Semiconductor quantum dots

来源：评论

学校读者我要写书评

暂无评论

Metacognitive-Based Collaborative programming: A Novel Approach to Enhance Learning Performance in programming Courses 6th

Metacognitive-Based Collaborative Programming: A Novel Appro...

引用

Proceedings of the 6th International Conference on Innovative Technologies and Learning, ICITL 2023

作者： Li, Wei Tseng, Judy C. R. Cheng, Li-Chen STEM Education Research Center Wenzhou University Zhejiang Province Wenzhou China Ph.D. Program in Engineering Science Chung Hua University Hsinchu Taiwan Department of Computer Science and Information Engineering Chung Hua University Hsinchu Taiwan Department of Information and Finance Management National Taipei University of Technology Taipei City Taiwan

ISBN: (纸本)9783031401121

Students’ computational thinking and programming skills may grow due to collaborative programming. But as the researchers have noted, students frequently do not use metacognition to manage their cognitive activities while collaborating, which negatively affects learning. This study created a metacognition-based collaborative programming (MCP) system to improve students’ performance in collaborative programming. A seven-week study examined how the approach affected students’ performance in programming courses. The 88 middle school students were split into two groups: the experimental group received the metacognition-based collaborative programming approach, and the control group received the conventional computer-supported collaborative programming approach. The results indicated that the metacognitive-based collaborative programming approach enhanced students’ academic scores in programming courses and their computational thinking tendencies. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.

关键词： Learning systems

来源：评论

学校读者我要写书评

暂无评论

Ultra Wide dynamic Range High Power RF Rectifier

Ultra Wide Dynamic Range High Power RF Rectifier

引用

European Conference on Antennas and Propagation, EuCAP

作者： Xiaochen Yu Jinyao Zhang Minzhang Liu Yi Huang Ta-Jen Yen Jiafeng Zhou Department of Electrical Engineering and Electronics University of Liverpool Liverpool UK Department of Materials Science and Engineering National Tsing Hua University Hsinchu Taiwan International Intercollegiate Ph.D. Program National Tsing Hua University Hsinchu Taiwan

A high-power RF-to-dC rectifier applied to wireless power transfer (WPT) with ultra-wide input power dynamic range is proposed in this paper. A GaN (gallium nitride) HEMT (high electron mobility transistor) is utilized to realize rectification at high power up to 12 W and a Schottky diode is used for lower-power rectification. Excellent switching between the two circuits’ rectification modes is achieved by adding a circulator. The rectifier has a 30 dB dynamic range with an efficiency of over 50% at 2.4 GHz.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Bone quality in zebrafish vertebrae improves after alendronate administration in a glucocorticoid-induced osteoporosis model

引用

Journal of the Mechanical Behavior of Biomedical materials 2024年 154卷 106521页

作者： Bohns, Fabio Rocha Akhtar, Riaz Chuang, Yung-Jen Chen, Po-Yu Department of Materials Science and Engineering National Tsing Hua University Hsinchu Taiwan Department of Mechanical Materials and Aerospace Engineering University of Liverpool Liverpool United Kingdom International Intercollegiate Ph.D. Program National Tsing Hua University Hsinchu Taiwan School of Medicine National Tsing Hua University Hsinchu Taiwan

Glucocorticoid-induced osteoporosis (GIOP) changes the microarchitecture of bones and often leads to the reduction of bone-mineral density (BMd) and increased fracture rates. Zebrafish has been used as an alternative model for GIOP, however, the interaction of GIOP, and its treatment, with zebrafish bone morphometrics and mechanical properties, remains a challenge. Thus, this study aimed to evaluate the effects of prednisolone and alendronate on the properties of zebrafish vertebrae. Adult 7-month-old zebrafish were distributed into four groups: control (CTRL), prednisolone-only (PN), alendronate-only (ALN), and the sequential use of both medicines (PN + ALN). Fish skeletons were scanned via micro-tomography (n = 3) to obtain vertebra morphometrics (e.g., BMd). Bone morphology was assessed using scanning electron microscopy (n = 4) and the biomechanical behaviour with nanoindentation technique (n = 3). The BMd decreased in PN (426.08 ± 18.58 mg/cm3) and ALN (398.23 ± 10.20 mg/cm3) groups compared to the CTRL (490.43 ± 41.96 mg/cm3) (p 3) (p > 0.05). The bone layered structures remain preserved in all groups. The vertebrae of the groups that received ALN and PN + ALN, displayed higher modulus of elasticity (27.27 ± 1.59 GPa and 25.68 ± 2.07 GPa, respectively) than the CTRL (22.74 ± 1.60 GP) (p © 2024 Elsevier Ltd

关键词： Bone

来源：评论

学校读者我要写书评

暂无评论

Integration of a Microfluidics System With a U-Shaped Optical Fiber Sensor for Sensing Various Concentrations of Glucose

引用

IEEE Sensors Journal 2024年第13期24卷 20617-20628页

作者： Hsiang-Cheng Hsu Tien-Bao Tran Thi Thuy-Vy Nguyen Hoang-dang Le Chia-Chin Chiang Department of Ph.D. Program in Maritime Science and Technology College of Maritime National Kaohsiung University of Science and Technology Kaohsiung Taiwan Department of Mechanical Engineering National Kaohsiung University of Science and Technology Kaohsiung Taiwan College of Engineering Can Tho University Ninh Kieu Can Tho Vietnam

This study introduces a successfully manufactured U-shaped optical fiber sensor integrated with a microfluidics system to detect varying glucose concentrations. It outlines the fabrication process of the microfluidics system, accomplished using a CO2 laser on polymethyl methacrylate (PMMA) material. Through three cycles of experiments involving different glucose concentrations, the results indicate a consistent trend in both resonance wavelength and transmission loss, showing an increase as glucose concentration rises from 5% to 50%. The system demonstrates a high wavelength sensitivity coefficient of 0.114 nm/% with ${R}^{{2}} =0.95$ and a notable transmission loss sensitivity of 0.09 dB/% and ${R}^{{2}} =0.94$ . This advanced system proves to be effective in achieving rapid, sensitive, and cost-efficient glucose monitoring. Consequently, the microfluidics system is deemed suitable for its intended purpose.

关键词： Microfluidics Glucose Optical fiber sensors Sensors Sensitivity Claddings Viscosity

来源：评论

学校读者我要写书评

暂无评论

Synergistic sodium alginate- and biochar-immobilized cells for enhancing fermentative hydrogen production from food waste

引用

Environmental science and Pollution Research 2024年第56期31卷 64524-64533页

作者： Ngamnurak, phonsini Plangklang, Pensri Pomdaeng, Prakaidao Ko, Ting-Wu Reungsang, Alissara Chu, Chen-Yeon Graduate School Khon Kaen University Khon Kaen40002 Thailand Department of Biology Technology Faculty of Technology Khon Kaen University Khon Kaen40002 Thailand Research Group for Development of Microbial Hydrogen Production Process From Biomass Khon Kaen University Khon Kaen40002 Thailand Institute of Green Products Feng Chia University Taichung Taiwan Ph.D. Program of Mechanical and Aeronautical Engineering Feng Chia University Taichung Taiwan Master’s Program of Green Energy Science and Technology Feng Chia University Taichung Taiwan Academy of Science Royal Society of Thailand Bangkok10300 Thailand

An immobilized hydrogen-producing consortium investigated biohydrogen production from food waste using a combination of sodium alginate and cassava rhizome biochar. We investigated the effect of varying the biochar concentration from 0 to 3% and the size of immobilized cells from 1 to 7 mm. Immobilized cells were prepared using 50% (v/v) enriched hydrogen-producing consortium, 2% (w/v) sodium alginate, and 0 to 3% (w/v) cassava rhizome biochar. The optimal conditions for achieving the highest hydrogen production in the batch fermentation reactor were identified as a biochar concentration of 2% (w/v) and an immobilized cell size of 2 mm. The highest hydrogen yield, maximum hydrogen production rate, and lag time recorded were 0.69 mmol H2/g-COd, 0.02 mmol H2/g-COd.h, and 41.51 h, respectively. This research highlights the potential of cassava biochar technology for efficient biohydrogen production from food waste, contributing to renewable energy generation and sustainable waste management. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.

关键词： Anaerobic digestion

来源：评论

学校读者我要写书评

暂无评论

Construction and tests of phosphor view screen station for monitoring transverse profile of electron beam at PCELL 17

Construction and tests of phosphor view screen station for m...

引用

17th Siam physics Congress: Carbon Neutrality, SPC 2022

作者： Khangrang, N. Kitisri, P. Saisut, J. Techakaew, K. Rimjaem, S. Plasma and Beam Physics Research Facility Department of Physics and Materials Science Faculty of Science Chiang Mai University Chiang Mai50200 Thailand Master Degree Program in Physics Chiang Mai University Chiang Mai50200 Thailand Thailand Center of Excellence in Physics Ministry of Higher Education Science Research and Innovation Bangkok10400 Thailand Ph.D. Degree Program in Physics Chiang Mai University Chiang Mai50200 Thailand

development of an accelerator-based light source for generating coherent terahertz (THz) and mid-infrared (MIR) free-electron laser (FEL) is ongoing at the PBP-CMU Electron Linac Laboratory (PCELL). For producing high quality radiation, suitable electron beam property is necessary. In particle accelerator technology, transverse beam distribution and profile can be measured by using several techniques. The beam monitoring using view screen station is one of popular and effective methods. At PCELL, we use stations consisting of phosphor screen equipped with CCd camera to monitor, measure and record the beam image along the accelerator system and beamlines. The phosphor screen was chosen due to its high spatial resolution. The phosphor film is uniformly coated on a thin aluminium plate. Its green emission when electrons hitting the screen is matched well with the respond of the CCd camera. The screen can be moved in and out from the vacuum chamber using the air pressurized linear actuator. This paper presents about design, construction and tests of the screen stations at PCELL. The resolution of measurements for beam transverse profile and emittance is also be discussed. © Published under licence by IOP Publishing Ltd.

关键词： CCd cameras

来源：评论

学校读者我要写书评

暂无评论

TiO2 Hole Transport Layer Incorporated in a Thermally Evaporated Sb2Se3 photoelectrode Exhibiting Low Onset Potential for photoelectrochemical Applications

引用

Energy and Fuels 2024年第17期38卷 16936-16948页

作者： Xavier, Thatheyus Peter Piraviperumal, Malar Kuo, Chih-Yu Govindasamy, Mani Thinfilm Photovoltaics Laboratory Department of Physics and Nanotechnology SRM Institute of Science and Technology Tamil Nadu Kattankulathur603203 India Department of Chemical Engineering & Biotechnology National Taipei University of Technology Taipei City10608 Taiwan Research Center for Intelligence Medical Devices Ming Chi University of Technology New Taipei City243303 Taiwan Department of Research and Innovation Saveetha School of Engineering SIMATS Chennai602105 India Taipei10608 Taiwan International Ph.D. Program in Innovative Technology of Biomedical Engineering and Medical Devices Ming Chi University of Technology New Taipei City243303 Taiwan

developing cost-effective photoelectrodes with a low band gap in the NIR-visible regions remains a challenge to achieve effective hydrogen production. We report the details of superstrate-configured photocathodes, consisting of antimony selenide (Sb2Se3) light absorbing layers with titanium dioxide (TiO2) as a hole transport layer, exhibiting the capability for hydrogen evolution with broad range light absorption enabled by the low band gap value of ∼1.2 eV of Sb2Se3. Strong anisotropy is a significant characteristic property of Sb2Se3, allowing superior electrical transportation along the [hkl] crystallographic orientation, which is obtained via close space evaporation of presynthesized bulk material at a growth temperature of 250 °C, over the solution-processed TiO2 film on a fluorine-doped tin oxide (FTO) substrate. The superstrate-configured FTO/TiO2/Sb2Se3 photocathode exhibited a photocurrent density of 100 μA cm-2 at −0.3 V vs RHE in 0.5 M H2SO4 under 1 sun illumination. To further improve photocurrent density, Pt as a cocatalyst was deposited over Sb2Se3 that led to enhanced photocurrent to 3 mA cm-2 at −0.3 V vs RHE in 0.5 M H2SO4 under 1 sun illumination. despite the relatively lower photocurrent observed, which resulted due to a large conduction band offset (ΔECB = 0.99 eV) of the TiO2/Sb2Se3 interface in a superstrate configuration, a significantly lower onset potential of −0.1 V vs RHE was observed. The results are encouraging due to the low band gap of Sb2Se3, photocorrosion stability, and straightforward fabrication, which is expected to assist for significant outcomes. © 2024 American Chemical Society.

关键词： Titanium dioxide

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：