检索结果-内蒙古大学图书馆

FLAMMABILITY AND TOXICITY OF COMPOSITE-MATERIALS FOR MARINE VEHICLES

NAVAL ENGINEERS JOURNAL 1990年第5期102卷 45-54页

作者： SEVART, JL GRIFFIN, OH GURDAL, Z WARNER, GA Jeffrey L. Sevart:is a native of Kansas and a 1985 graduate of Kansas State University with a B.S. in mechanical engineering (magna cum laude). After working as a stress analysis engineer at Boeing Military Airplane Company in Wichita Kans. he attended Virginia Polytechnic Institute and State University and received an M.S. in engineering mechanics in February 1988. He currently resides in Akron Ohio working as a research engineer in tire composites research at The Goodyear Tire and Rubber Company. O. Hayden Griffin Jr.:received his B.S. and M.S. in mechanical engineering from Texas Tech University in 1970 and 1971 respectively. He received his Ph.D. in engineering mechanics from Virginia Polytechnic Institute and State University in 1980. Prior to joining the faculty of Virginia Polytechnic Institute and State University as associate professor of engineering science and mechanics in September 1985 he was employed at the U.S. Naval Surface Warfare Center (Dahlgren Virginia) BF Goodrich Tire Group (Akron Ohio) the Bendix Advanced Technology Center (Columbia Maryland) and the Johns Hopkins University Applied Physics Laboratory (Laurel Maryland). He is currently an associate director of the Virginia Institute for Material Systems. He is a registered professional engineer in Virginia and is a member of the American Society of Mechanical Engineers and the American Society for Composites. Zafer Gürdal:received his M.S. in mechanical and aerospace engineering from Illinois Institute of Technology in 1981 and his Ph.D. in aerospace engineering from Virginia Polytechnic Institute and State University in 1985. He worked as a research associate in the Aerospace and Ocean Engineering Department at Virginia Tech before joining the Engineering Science and Mechanics Department as an assistant professor in September 1985. Professor Gürdal's research interests include: composite structures failure mechanics of composites structural optimization and damage tolerant design. He is a member of the American Institute

Characteristics of both thermoplastic and thermoset composite materials as they pertain to marine vehicle applications are discussed. Comparison of various material selection factors such as strength, damage and moisture resistance, and flammability and toxicity as well as cost and availability of thermoset and thermoplastic composite materials are presented. Methods for testing and reducing the flammability and toxicity are discussed. Many commercially available composite systems are reported to provide favorable characteristics for marine applications. Although there seems to be a need for improved production technology for thermoplastics, they present potential advantages in physical properties over thermoset composites.

关键词： Composite Materials

来源：评论

学校读者我要写书评

暂无评论

COMPUTER-SYSTEM ARCHITECTURE CONCEPTS FOR FUTURE COMBAT SYSTEMS

引用

NAVAL ENGINEERS JOURNAL 1990年第3期102卷 43-62页

作者： ZITZMAN, LH FALATKO, SM PAPACH, JL Dr. Lewis H. Zitzman:is the group supervisor of the Advanced Systems Design Group Fleet Systems Department The Johns Hopkins University Applied Physics Laboratory (JHU/APL). He has been employed at JHU/APL since 1972 performing applied research in computer science and in investigating and applying advanced computer technologies to Navy shipboard systems. He is currently chairman of Aegis Computer Architecture Data Bus and Fiber Optics Working Group from which many concepts for this paper were generated. Dr. Zitzman received his B.S. degree in physics from Brigham Young University in 1963 and his M.S. and Ph.D. degrees in physics from the University of Illinois in 1967 and 1972 respectively. Stephen M. Falatko:was a senior engineering analyst in the Combat Systems Engineering Department Comptek Research Incorporated for the majority of this effort. He is currently employed at ManTech Services Corporation. During his eight-year career first at The Johns Hopkins University Applied Physics Laboratory and currently with ManTech Mr. Falatko's work has centered around the development of requirements and specifications for future Navy systems and the application of advanced technology to Navy command and control systems. He is a member of both the Computer Architecture Fiber Optics and Data Bus Working Group and the Aegis Fiber Optics Working Group. Mr. Falatko received his B.S. degree in aerospace engineering with high distinction from the University of Virginia in 1982 and his M.S. degree in applied physics from The Johns Hopkins University in 1985. Mr. Falatko is a member of Tau Beta Pi Sigma Gamma Tau the American Society of Naval Engineers and the U.S. Naval Institute. Janet L. Papach:is a section leader and senior engineering analyst in the Combat Systems Engineering Department Comptek Research Incorporated. She has ten years' experience as an analyst supporting NavSea Spa War and the U.S. Department of State. She currently participates in working group efforts under Aegis Combat System Doctrin

This paper sets forth computer systems architecture concepts for the combat system of the 2010–2030 timeframe that satisfy the needs of the next generation of surface combatants. It builds upon the current Aegis computer systems architecture, expanding that architecture while preserving, and adhering to, the Aegis fundamental principle of thorough systems engineering, dedicated to maintaining a well integrated, highly reliable, and easily operable combat system. The implementation of these proposed computer systems concepts in a coherent architecture would support the future battle force capable combat system and allow the expansion necessary to accommodate evolutionary changes in both the threat environment and the technology then available to effectively counter that threat. Changes to the current Aegis computer architecture must be carefully and effectively managed such that the fleet will retain its combat readiness capability at all times. This paper describes a possible transition approach for evolving the current Aegis computer architecture to a general architecture for the future. The proposed computer systems architecture concepts encompass the use of combinations of physically distributed, microprocessor-based computers, collocated with the equipment they support or embedded within the equipment itself. They draw heavily on widely used and available industry standards, including instruction set architectures (ISAs), backplane busses, microprocessors, computer programming languages and development environments, and local area networks (LANs). In this proposal, LANs, based on fiber optics, will provide the interconnection to support system expandability, redundancy, and higher data throughput rates. A system of cross connected LANs will support a high level of combat system integration, spanning the major warfare areas, and will facilitate the coordination and development of a coherent multi-warfare tactical picture supporting the future combatant command st

关键词： Computer Architecture

来源：评论

学校读者我要写书评

暂无评论

PROTON RBS MEASUREMENT OF THE OXYGEN IN HEAVY-METAL OXIDES

引用

NUCLEAR INSTRUMENTS & METHODS IN physics RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 1989年第PART 2期40-1卷 766-768页

作者： XIE, T RYAN, SR FISCHBECK, HJ Engineering Physics Program University of Oklahoma Norman Oklahoma 73019 USA

Although the stoichiometry of high- T c superconductors is often measured using alpha-particle RBS, the small Rutherford cross section for oxygen relative to the high- Z components makes a determination of the oxygen content difficult. Above 1 MeV, the cross section for proton backscattering from oxygen becomes significantly greater than the Rutherford cross section. Studies of proton backscattering in CuO between 0.6 and 2.0 MeV show that it is possible to measure the oxygen content of high- Z metal oxides. RBS simulations using the Bragg-rule stopping power consistently underestimate the low-energy yield. Scaling the stopping power by a linear function of energy to reduce loss at low energy improves the simulation in CuO, Cu and Au. This general result suggests that the standard RBS simulation procedure may omit some relevant physics.

关键词： Protons

来源：评论

学校读者我要写书评

暂无评论

Tritium penetration through concrete

引用

Waste Management 1989年第1期9卷 27-36页

作者： Eichholz, G.G. Park, W.J. Hazin, C.A. Nuclear Engineering and Health Physics Program Georgia Institute of Technology Atlanta GA 30332 United States

Experimental tests have been performed, with tritium as a tracer, on a series of concrete cylinders of a high slag aggregate composition to measure tritium mobility and to determine its dependence on concrete properties and environmental parameters. It was found that uncoated concrete absorbs water quite rapidly and once wetted, conducts tritium in water at a rate of about 8 × 10-4 cm3/cm2 day. For thick specimens, over 10 cm in thickness, tritium movement is solely determined by porosity and hydraulic conductivity. Diffusion rates can be lowered by a surface finish, by using a smaller stone size in the aggregate and by vibratory compaction. Standing water may provide a hydrostatic head that results in some increase in flow rate, but it too is limited by the terminal value in hydraulic conductivity. Unless the concrete wall is coated or impregnated in some permanent fashion, it appears that little credit can be taken for the concrete walls as a retarding barrier for tritium-bearing liquids.

关键词： Radioactive Wastes

来源：评论

学校读者我要写书评

暂无评论

Dose rate effects in the control of iron bacteria by irradiation

引用

Applied Radiation and Isotopes 1989年第4期40卷 337-339页

作者： Eichholz, G.G. Poppell, S.W. Nuclear Engineering and Health Physics Program Georgia Institute of Technology Atlanta GA 30332 United States

The control of iron-reducing bacteria, such as Pseudonomas, in water intake pipes by irradiation is an attractive alternative to chemical methods. Tests have been conducted with a slow-flowing circulating system to determine the lowest dose-rate that will inhibit bacterial build-up on wire-mesh filters. Dose rates of the order of 2.5 Gy/h seem to be adequate for this purpose, permitting the use of relatively weak sources.

关键词： Microorganisms

来源：评论

学校读者我要写书评

暂无评论

STANDARD HARDWARE ACQUISITION AND RELIABILITY program - CONCEPTS, BENEFITS, AND POTENTIAL

引用

NAVAL ENGINEERS JOURNAL 1989年第3期101卷 231-239页

作者： WEAVER, LW The author:is a program manager with Naval Weapons Support Center Crane Indiana. Mr. Weaver graduated from Indiana State University in 1969 where he received a B.S. degree with a mathematics major and a minor in physics. He began his career with the Naval Weapons Support Center in 1969 where he worked as a physicist and as an electronics engineer before entering various management positions. In the past ten years he has provided engineering and technical support to fleet ballistic missile guidance programs and to Navy standard computer and standard signal processor programs. He recently completed an assignment as manager of an electronics systems development division with responsibility for development of electronic control systems for fleet applications using standard electronic modules. Currently he is the program manager for the Standard Hardware Acquisition and Reliability Program (SHARP) managed through the Naval Sea Systems Command Sea-06. He is a member of the American Society of Naval Engineers and the Federal Managers Association.

The Standard Hardware Acquisition and Reliability program (SHARP) includes three major categories of hardware standards. They are Standard Electronic Modules (SEM), Standard Power Supplies (SPS), and Standard Electronic Enclosures (SES). SHARP responsibilities include development and testing of these standards and their integration into electronic systems. The purpose of SHARP is to reduce development, production, and logistics support costs of electronic systems; to improve system operational availability; and to shorten the system acquisition cycle. The basic concepts applied towards this purpose are: functional standardization; functional specification; a disciplined quality program; design flexibility; and emphasis on design for maintenance and repair. The paper describes the application of these concepts in the SHARP program and how they result in: — improved performance and supportability; — multisystem application of functional standards: — standard interfaces between system elements; — competitive procurement of hardware; — improved system readiness; — interchangeability of spares; — introduction of new technology into deployed systems; — improved testability; and — reduced cost to the Department of Defense (DoD). SHARP experience and benefits to the user are described, including specific applications of SHARP hardware in DoD systems and examples of multimillion dollar cost savings to these systems. The status of current SHARP initiatives and potential savings through broader application of SHARP in system developments are then discussed.

关键词： Computer Hardware

来源：评论

学校读者我要写书评

暂无评论

THE AEGIS DATA BUS EXPERIMENT

引用

NAVAL ENGINEERS JOURNAL 1989年第5期101卷 53-58页

作者： FRINK, JG VERVEN, DM John G. Frink is an assistant group supervisor in the Fleet Systems Department of The Johns Hopkins University Applied Physics Laboratory. He received his B.S. degree in physics from Michigan State University in 1968 and the M.S. degree in computer science from the University of Maryland in 1971. Mr. Frink worked at the Naval Surface Weapons Center White Oak Laboratory on a variety of weapons systems before joining the Applied Physics Laboratory in 1978. Mr. Frink has supervised the development of a large scale battle group simulation that successfully employs the receiver selection paradigm described herein on a hardware suite composed of an extensible number of (currently 15) processors. David M. Verven is a senior electrical engineer in the Fleet Systems Department of The Johns Hopkins University Applied Physics Laboratory. He received the B.S. degree in electrical engineering from the University of Maryland College Park in 1979 and the M. S. degree in the same discipline from The Johns Hopkins University in 1984. Mr. Verven joined the Applied Physics Laboratory in 1979 and initially worked on analysis of Navy sensor systems. In 1981 he was the AN/SPS-49 test team leader for the New Threat Upgrade (NTU) combat system land-based test. In 1982 he became involved in the development of the BBWRS system. Currently he is involved in real-time computer program development for the CEP project.

This paper documents an experiment performed by The Johns Hopkins University Applied physics Laboratory to measure the effect of inserting a data bus into a combat system. The experiment was conducted at the Aegis Computer Center located at the Naval Surface Weapons Center in Dahlgren, Virginia (NSWC/DL). The purpose of the experiment was to determine whether or not the Aegis Weapon System (the core of the Aegis Combat System) could be operated with a portion of its point-to-point interelement cables replaced by a data bus. The data bus chosen for the experiment employs message broadcasting with receiver selection. A primary goal of the experiment was to minimize the amount of Aegis computer program changes required to accommodate the data bus. The results presented in this paper will show that the experiment was a success. Key certification tests were passed with no computer program changes to the tactical elements and minimal changes in the Aegis tactical executive (ATES) program (less than 110 words changed).

关键词： Data Transmission Equipment

来源：评论

学校读者我要写书评

暂无评论

NEW TECHNOLOGY IN OIL CONTENT MONITORS

引用

NAVAL ENGINEERS JOURNAL 1989年第2期101卷 48-55页

作者： NARDELLA, JA RAW, TT STOKES, GH John A. Nardella is the life-cycle manager for oil content monitor equipment for the Naval Sea Systems Command Washington D.C. He has an M.S. degree in chemical engineering from the Pennsylvania State University and is a licensed professional engineer in the Commonwealth of Virginia. Dr. Timothy T. Raw is the principal investigator responsible for the oil contamination monitor project. He has a doctorate in physical chemistry from Rensselear Polytechnical Institute and a B.A. in chemistry and computer science from Saint Louis University. Dr. Raw is currently a staff member at Anheuser Busch Inc. in Saint Louis. Dr. Grant H. Stokes is responsible for the technical management of Geo-Centers Inc. Boston operation. He has doctorate and M. S. degrees in physics from Princeton University and a B.A. from Colorado College. Previous to joining Geo-Centers Inc. he was a staff member in the Laser Fusion Program at Los Alamos National Laboratory.

International antipollution requirements have been legislated to regulate the oil content of bilge effluent from ships. In response to these standards, the U.S. Navy is currently in the process of installing pollution abatement equipment on all vessels. The equipment will consist of an oil-water separator in the bilge discharge line, followed by an oil content monitor which makes the final decision on whether or not the water is clean enough to be pumped overboard. The monitor is required to make a real-time measurement of oil concentration in the range 15 ± 5 to 100 ± 20 ppm for flow rates up to 50 gal/min. and possibly in the presence of interfering contaminants, such as rust. This paper presents the results of the current effort to develop a monitor which satisfies all of these requirements and is sufficiently rugged for fleet deployment. The monitor under development employs two fiber optic systems and a small microprocessor. The first optical system measures the concentration of particles in the flow as a function of their sizes, using small angle forward scattering. The second determines what percentage of the particles in the flow are oil, using large angle scattering. The microprocessor takes the data from the two optical systems and calculates the oil concentration in the flow. Since the particle size is measured by the monitor, no sample preparation is required and the monitor may be placed directly in the discharge line where it responds to changes in oil content in less than one second. In addition, this monitor can notify the operator of impending oil-water separator failure associated with passing large oil particles. A demonstration monitor consisting of the forward scattering unit has been successfully tested at the NavSea oil pollution abatement test facility at the Naval Ship Systems engineering Station at Philadelphia. The monitor agrees well with chemical means of measuring oil content. Results of this comparison and laboratory test of a prototyp

关键词： Water Pollution

来源：评论

学校读者我要写书评

暂无评论

THE QUANTIFICATION OF INTEROPERABILITY

引用

NAVAL ENGINEERS JOURNAL 1989年第3期101卷 251-256页

作者： MENSH, DR KITE, RS DARBY, PH Dennis Roy Mensh:is currently the task leader Interoperability Project with the MITRE Corporation in McLean Va. He received his B.S. and M.S. degrees in applied physics from Loyola College in Baltimore Md. and the American University in Washington D. C. He also has completed his course work towards his Ph.D. degree in computer science specializing in the fields of systems analysis and computer simulation. He has been employed by the Naval Surface Warfare Center White Oak Laboratory Silver Spring Md. for 20 years in the areas of weapon system analysis and the development of weapon systems simulations. Since 1978 he has been involved in the development of tools and methodologies that can be applied to the solution of shipboard combat system/battle force system architecture and engineering problems. Mr. Mensh is a member of ASNE MORS IEEE U.S. Naval Institute MAA and the Sigma Xi Research Society. Robert S. Kite:is a systems engineer with the Naval Warfare Systems Engineering Department of the MITRE Corporation in McLean Va. Mr. Kite received his B.S. degree in electronic engineering from The Johns Hopkins University in Baltimore Md. Mr. Kite retired from the Federal Communications Commission in 1979 and served a project manager of the J-12 Frequency Management Support Project for the Illinois Institute of Technology Research Institute in Annapolis Md. before joining MITRE. Mr. Kite is presently a member of ASNE the Military Operations Research Society and an associate member of Sigma Xi. Paul H. Darby:has worked in the field of interoperability both in the development of interoperability concepts and systems since joining the Department of the Navy in 1967. He was the Navy's program manager for the WestPacNorth TACS/ TADS and IFFN systems. He is currently head of the Interoperability Branch Warfare Systems Engineering Office Space and Naval Warfare Systems Command. He holds a B.S. from the U.S. Naval Academy.

JCS Pub 1 defines interoperability as “The ability of systems, units or forces to provide services to and accept services from other systems, units or forces and to use the services so exchanged to enable them to operate effectively together.” With JCS Pub 1 as a foundation, interoperability of systems, units or forces can be factored into a set of components that can quantify interoperability. These components are: media, languages, standards, requirements, environment, procedures, and human factors. The concept described in this paper uses these components as an analysis tool to enable specific detailed analyses of the interoperability of BFC3 systems, units, or forces for the purpose of uncovering and resolving interoperability issues and problems in the U.S. Navy, Joint, and Allied arenas. Also, as a management tool, the components can help determine potential interoperability characteristics of future U.S. Navy BFC3 systems for compliance with battle force systems architectures. The approach selected for the quantification of interoperability was the development of a set of measures of performance (MOPs) and measures of effectiveness (MOEs). The MOPs/MOEs were integrated with a candidate set of components, which were used to partition the totality of interoperability into measurable entities. The methodology described employs basic truth table theory in conjunction with logic equations to evaluate the interoperability components in terms of MOPs that were aggregated to MOEs. It is believed that this concept, although elementary and based on fundamental principles, represents an operationally significant approach rather than a theoretical approach to the quantification of interoperability. The vehicle used as a means to measure the MOPs and MOEs was the Research Evaluation and Systems Analysis (RESA) computer modeling and simulation capability at the Naval Ocean Systems Center (NOSC), San Diego, Calif. Data for the measurements were collected during a Tactical I

关键词： Military engineering

来源：评论

学校读者我要写书评

暂无评论

MIGRATION OF ELEMENTAL MERCURY THROUGH SOIL FROM SIMULATED BURIAL SITES

引用

WATER RESEARCH 1988年第1期22卷 15-20页

作者： EICHHOLZ, GG PETELKA, MF KURY, RL Nuclear Engineering and Health Physics Program Georgia Institute of Technology Atlanta GA 30332 U.S.A.

The potential migration of metallic mercury from shallow land burial sites into groundwater has been investigated by means of laboratory column tests and radioactive tracers. It was found that mercury will dissolve in water on concentrations of 20-80 ppb and high concentrations of EDTA in water will increase mercury solubility by complex formation. Standing mercury was found to penetrate up to 3-4 cm into dry soil columns under its own head. Flow tests with soil-equilibrated water, EDTA solutions or kaolin suspensions all showed little demonstrable migration or entrainment beyond the top 2 cm of the columns.

关键词： mercury waste disposal subsurface water soil migration entrainment radioactive tracers environmental impact mercury analysis

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：