检索结果-内蒙古大学图书馆

Sulfur-doped hard carbon hybrid anodes with dual lithium-ion/metal storage bifunctionality for high-energy-density lithium-ion batteries

引用

Carbon Energy 2023年第1期5卷 71-81页

作者： Sungmin Cho Jong Chan Hyun Son Ha Yeonhua Choi Honggyu Seong Jaewon Choi Hyoung-Joon Jin Young Soo Yun Program in Environmental and Polymer Engineering Inha UniversityIncheonSouth Korea KU-KIST Graduate School of Converging Science and Technology Korea UniversitySeoulSouth Korea Departmant of Chemistry and Research Institute of Natural Science Gyeongsang National UniversityJinjuSouth Korea Department of Polymer Science and Engineering Inha UniversityIncheonSouth Korea Division of Energy Engineering Kangwon National UniversityGangwon-doSouth Korea

Bifunctional hybrid anodes(BHAs),which are both a high-performance active host material for lithium-ion storage as well as a guiding agent for homogeneous lithium metal nucleation and growth,exhibit significant potential as anodes for next-generation high-energy-density lithium-ion batteries(LIBs).In this study,sulfur-doped hard carbon nanosphere assemblies(S-HCNAs)were prepared through a hydrothermal treatment of a liquid organic precursor,followed by high-temperature thermal annealing with elemental sulfur for application as BHAs for *** a carbonate-based electrolyte containing fluoroethylene carbonate additive,the S-HCNAs showed high lithium-ion storage capacities in sloping as well as plateau voltage sections,good rate capabilities,and stable *** addition,high average Coulombic efficiencies(CEs)of~96.9%were achieved for dual lithium-ion and lithium metal storage *** the LIB full-cell tests with typical NCM811 cathodes,the S-HCNA-based BHAs containing~400 mA h g^(−1) of excess lithium led to high energy and power densities of~500Wh kg^(−1) and~1695Wkg^(−1),respectively,and a stable cycling performance with~100%CEs was achieved.

关键词： hard carbon hybrid anode lithium-ion batteries lithium metal anode lithium metal batteries sulfur-doped carbon

来源：评论

学校读者我要写书评

暂无评论

Dense carbon nanofiber self-supporting electrode fabricated by orientation/compaction strategy for high volumetric lithium storage capacity

引用

Progress in Natural science:Materials International 2025年第1期35卷 229-237页

作者： Haihui Liu Chaoqun Chen Qiang Xu Yan Song Xiangwu Zhang Chang Ma Tianjin Municipal Key Lab of Advanced Fiber and Energy Storage Technology Tiangong University CAS Key Laboratory of Carbon Materials Institute of Coal Chemistry Chinese Academy of Sciences Fiber and Polymer Science Program Department of Textile Engineering Chemistry and Science Wilson College of Textiles North Carolina State University

Low bulk density greatly restricts the large-scale application of electrospun carbon-based fiber membrane as electrode in energy storage devices. To solve the above challenges, herein an orientation-compaction densification strategy is proposed to enhance the bulk density and volumetric capacity of PAN-based carbon nanofiber membranes as self-supporting electrode used in lithium-ion batteries（LIBs）. Specifically, highly-oriented fibers are achieved by high-speed roller collecting during electrospinning, and compaction densification is conducted by hot-pressing treatment. The effects of collecting speed and hot-pressing pressure on the morphology, conductivity,bulk density, tensile strength, and flexibility of the obtained carbon nanofiber membrane are *** to conventional fiber membranes, of which fibers are disorderly stacked, the oriented fiber membrane is much easier to achieve dense stacking by compaction. The obtained dense carbon nanofiber membrane demonstrates a bulk density of 0.566 g cm-3, and shows a significantly-enhanced volumetric capacity(318.3 mA h cm-3), high-rate performance(86.6 mA h cm-3at 5 A g-1), and satisfactory cycling stability when used as selfsupporting electrode of LIBs.

关键词： Bulk density Densification Electrospinning Orientation-compaction Volumetric capacity

来源：评论

学校读者我要写书评

暂无评论

Polyacrylonitrile Nanofber‑Reinforced Flexible Single‑Ion Conducting polymer Electrolyte for High‑Performance,Room‑Temperature All‑Solid‑State Li‑Metal Batteries

引用

Advanced Fiber Materials 2022年第3期4卷 532-546页

作者： Hui Cheng Chaoyi Yan Raphael Orenstein Mahmut Dirican Shuzhen Wei Nakarin Subjalearndee Xiangwu Zhang Fiber and Polymer Science Program Department of Textile EngineeringChemistry and ScienceWilson College of TextilesNorth Carolina State UniversityRaleighNC 27695USA

Single-ion conducting polymer electrolytes(SIPEs)can be formed by anchoring charge delocalized anions on the side chains of a crosslinked polymer matrix,thereby eliminating the severe concentration polarization efect in conventional dual-ion polymer *** of a plasticizer into the polymer matrix confers advantages of both liquid and solid ***,plasticized SIPEs usually face a trade-of between conductivity and mechanical *** insufcient strength,potentially there is short-circuiting failure during *** address this challenge,a simple and mechanicallyrobust SIPE was developed by crosslinking monomer lithium(4-styrenesulfonyl)(trifuoromethylsulfonyl)imide(LiSTFSI)and crosslinker poly(ethylene glycol)diacrylate(PEGDA),with plasticizer propylene carbonate(PC),on electrospun polyacrylonitrile nanofbers(PAN-NFs).The well-fabricated polymer matrix provided fast and efective Li^(+) conductive pathways with a remarkable ionic conductivity of 8.09×10^(-4) S cm^(−1) and a superior lithium-ion transference number close to unity(t_(Li+)=0.92).The introduction of PAN-NFs not only improved the mechanical strength and fexibility but also endowed the plasticized SIPE with a wide electrochemical stability window(4.9 V ***^(+)/Li)and better cycling *** longterm lithium cycling stability and dynamic interfacial compatibility were demonstrated by lithium symmetric cell *** importantly,the assembled all-solid-state Li metal batteries showed stable cycling performance and remarkable rate capability both in low and high current ***,this straightforward and mechanically reinforced SIPE exhibits great potential in the development of advanced all-solid-state Li-metal batteries.

关键词： Single-ion conducting polymer electrolyte Electrospun nanofbers Mechanical properties All-solid-state batteries Rate capability

来源：评论

学校读者我要写书评

暂无评论

Fluorinated Functional Units for Li+ Flux Homogenization in Silica Framework-Based Zwitterionic Single Ion Conductors for Stable Lithium Metal Batteries

引用

Advanced Energy Materials 2025年第21期15卷

作者： Handayani, Puji Lestari Yun, Susung Kim, Gihyeon Choi, U Hyeok Department of Polymer Science and Engineering and Program in Environmental and Polymer Engineering Inha University Incheon22212 Korea Republic of

Progress in commercializing solid polymer electrolytes (SPEs) for lithium metal batteries (LMBs) has been impeded by challenges, like concentration polarization, non-uniform Li+ flux, and an unstable solid electrolyte interface (SEI), which contribute to dendrite formation. To address these issues, silica framework (SF)-based single-ion conductors are proposed, featuring a unique solvation channel composed of a fluorinated segment, a high-dipole zwitterion, and a rotation-motion-driven ion-hopping medium. This design promotes low resistance at the cathode/electrode interface, suppresses dendrite growth at the anode/electrolyte interface, and maintains a uniform Li+ flux. This results show that continuous ion channels within a robust framework enhance Li-ion dissociation and transport, achieving high ionic conductivity (σDC = 8.8 × 10−4 S cm−1), a modulus of 0.9 GPa, a high lithium transference number (≈0.83), and an extended electrochemical stability window (up to 5.2 V) at 25 °C. This design fosters the formation of a hybrid organic/inorganic SEI layer composed of Li2CO3, LiF, and Li2O, enabling ultra-stable Li plating/stripping for over 4000 h at 0.1 mA cm−2. Furthermore, the full cells demonstrate excellent rate performance and long-term cycling stability and capacity retention (81% for Li||LFP and 86% for Li||NCM811 after 400 cycles at 1 C) and high coulombic efficiency, offering a promising strategy to stable LMBs. © 2025 The Author(s). Advanced Energy Materials published by Wiley-VCH GmbH.

关键词： Solid electrolytes

来源：评论

学校读者我要写书评

暂无评论

Bio-inspired Smart Composites with Multi-scale Architecture and Surface engineering 23

Bio-inspired Smart Composites with Multi-scale Architecture ...

引用

23rd International Conference on Composite Materials, ICCM 2023

作者： Zeng, Songshan Shen, Kuangyu Li, Rui Smith, Andrew Zhang, Dianyun Sun, Luyi Polymer Program Institute of Materials Science Department of Chemical & Biomolecular Engineering University of Connecticut United States

来源：评论

学校读者我要写书评

暂无评论

Ion-Anchoring Dipole-Integrated Composite Elastomer Electrolyte and Cathode for High-Performance Lithium Metal Batteries via Multiple-Bridge engineering

引用

Advanced Energy Materials 2025年第0期

作者： Cho, A Hyeon Je, Ji Hyang Choi, U Hyeok Department of Polymer Science and Engineering and Program in Environmental and Polymer Engineering Inha University Incheon22212 Korea Republic of

Solid-state electrolytes (SSEs) hold significant potential for advancing lithium metal batteries (LMBs) by enhancing safety through the replacement of liquid electrolytes. However, challenges such as low ionic conductivity, limited electrochemical stability, and poor electrolyte/electrode interface compatibility hinder the development of high-energy-density LMBs. Herein, a strategy for designing SSEs is proposed using multiple-bridge engineered composite elastomer electrolytes (CEEs) that incorporate ion-rotating dipole interactions, ion-anchoring dipole interactions, and hydrogen bonding, along with a CEE-based composite elastomer cathode (CEC). This design combines a volume-adaptive elastomer matrix, a high-Li+ conducting deep eutectic electrolyte, and robust nanowires. The resultant CEE exhibits high ionic conductivity (1.7 × 10−3 S cm−1), a lithium transference number of 0.72, and a wide electrochemical stability window (up to 4.9 V) at 298 K. The engineered uniform Li+ flux also promotes stable Li plating/stripping for over 900 h at 0.1 mA cm−2. Furthermore, the LFP-based CEC|CEE|Li full cells deliver a reversible capacity of 133 mAh g−1 with 95% retention after 300 cycles in coin cells, and 129 mAh g−1 with 96% retention after 250 cycles in pouch cells at 1 C. This strategy presents a promising approach for designing solid-state polymer electrolytes to extend the lifespan of high-energy-density LMBs. © 2025 Wiley-VCH GmbH.

关键词： Elastomers

来源：评论

学校读者我要写书评

暂无评论

Core/shell magnetite/copolymer composite nanoparticles enabling highly stable magnetorheological response

引用

International Journal of Mechanical System Dynamics 2022年第2期2卷 155-164页

作者： Wenjiao Han Shun Wang Xiaoting Rui Yuzhen Dong Hyoungjin Choi School of Energy and Power Engineering Nanjing University of Science and TechnologyNanjingChina School of Materials Science and Engineering Harbin Institute of Technology at WeihaiWeihaiChina Department of Polymer Science and Engineering Inha UniversityIncheonRepublic of Korea Program of Environmental and Polymer Engineering College of EngineeringInha UniversityIncheonRepublic of Korea

Magnetorheological fluids(MRFs)have been successfully used in a variety of smart control systems,but are still limited due to their relatively poor settling ***,a core/shell‐structured Fe_(3)O_(4)/copolymer composite nanoparticle is synthesized as a new candidate material for stimulus‐responsive MRFs to tackle the limitation of the long‐term dispersion ***‐co‐diphenylamine copolymers(PANI‐co‐PDPA)are loaded onto the surface of Fe_(3)O_(4) nanoparticles,providing a lighter density and sufficient active interface for the dispersion of magnetic particles in the carrier *** features of the Fe_(3)O_(4)/copolymer composite nanoparticles,including morphology,compositional,and crystalline properties,are *** MRF is prepared by suspending Fe_(3)O_(4)/copolymer composite nanoparticles in a nonmagnetic medium oil,and its rheological properties are assessed using a controlled shear rate test and dynamic oscillation tests using a rotational *** models including the Bingham model and the Herschel–Bulkley model are fitted to the flow curves of the *** obtained Fe_(3)O_(4)/copolymer composite shows soft‐magnetic properties,as well as greater density adaptability and higher stability,compared to Fe_(3)O_(4).Moreover,the sedimentation testing provides information about the dispersion stability characteristics of MRF and shows a good correlation with high‐stability magnetorheological(MR)*** Fe_(3)O_(4)/copolymer‐based MRF with a tunable and instantaneous MR response is considered a promising material for smart control applications.

关键词： magnetorheological fluids core/shell dispersion stability copolymer magnetite

来源：评论

学校读者我要写书评

暂无评论

Iodinated underlayer for enhanced chemically amplified resist performance 42

Iodinated underlayer for enhanced chemically amplified resis...

引用

Advances in Patterning Materials and Processes XLII

作者： Ku, Yejin Choi, Hyoeun Kim, Gayoung Lee, Jin-Kyun Kim, Jiho Lee, Sangsul Program in Environment and Polymer Engineering Inha University Incheon22212 Korea Republic of Department of Polymer Science and Engineering Inha University Incheon22212 Korea Republic of Program in Semiconductor Convergence Inha University Incheon22212 Korea Republic of Pohang Accelerator Laboratory POSTECH Pohang37673 Korea Republic of

ISBN: (纸本)9781510686427

High-numerical-aperture (NA) extreme ultraviolet lithography (EUVL) is essential for next-generation semiconductor manufacturing, requiring advanced photoresists (PRs) that can function effectively in ultra-thin films. However, ultra-thin PR films-primarily needed to meet stringent depth-of-focus constraints-face several challenges, including low photon absorption and reduced etch resistance. Additionally, as feature sizes shrink, the diminished PR-substrate contact area exacerbates pattern collapse issues in high NA EUVL. To mitigate these challenges, underlayers are increasingly employed to enhance patterning performance. In this study, we propose a supportive underlayer (SUL) to enhance the sensitivity of chemically-amplified photoresists (CARs) and improve adhesion between the CAR film and the SUL. As a preliminary step, we introduced a simple experimental protocol to identify high-absorption elements that could be more effective in the CAR system, exploiting a PR film-overcoat bi-layer structure. Overcoats containing hydrogen (H), iodine (I), and tin (Sn) were readily prepared on top of the CAR film by the help of solvent orthogonality. Our findings revealed that iodine atoms significantly reduced the exposure threshold compared to hydrogen or tin. Based on these results, hydrophobic iodinated materials were selected as SUL candidates, and a few materials were synthesized with different iodine contents. After fabricating the bi-layer stack, we evaluated the solubility changes of PR films under both positive- and negative-tone development (PTD and NTD) conditions. The incorporation of an iodinated SUL beneath the CAR films enhanced both lithographic sensitivity and substrate adhesion, regardless of the development type, with higher iodine content further amplifying these effects. These findings provide a promising pathway for implementing EUV underlayers specifically tailored for high-NA EUVL. © 2025 SPIE.

关键词： Extreme ultraviolet lithography

来源：评论

学校读者我要写书评

暂无评论

Nanofiber Materials for Lithium‑Ion Batteries

引用

Advanced Fiber Materials 2023年第4期5卷 1141-1197页

作者： Xinwang Cao Chang Ma Lei Luo Lei Chen Hui Cheng Raphael Simha Orenstein Xiangwu Zhang National Engineering Laboratory for Advanced Yarn and Fabric Formation and Clean Production College of Textiles Science and EngineeringWuhan Textile UniversityWuhan 430200China Tianjin Municipal Key Lab of Advanced Fiber and Energy Storage Technology Tiangong UniversityTianjin 300387China Fiber and Polymer Science Program Department of Textile EngineeringChemistry and ScienceWilson College of TextilesNorth Carolina State UniversityRaleighNC 27695USA

The lithium-ion(Li-ion)battery has received considerable attention in the field of energy conversion and storage due to its high energy density and *** academic and commercial progress has been made in Li-ion battery *** area of advancement has been the addition of nanofiber materials to Li-ion batteries due to their unique and desirable structural features including large aspect ratios,high surface areas,controllable chemical compositions,and abundant composite *** the past few decades,considerable research efforts have been devoted to constructing advanced nanofiber materials possessing conductive networks to facilitate efficient electron transport and large specific surface areas to support catalytically active sites,both for the purpose of boosting electrochemical ***,we focus on recent advancements of nanofiber materials with carefully designed structures and enhanced electrochemical properties for use in Li-ion *** synthesis,structure,and properties of nanofiber cathodes,anodes,separators,and electrolytes,and their applications in Li-ion batteries are *** research challenges and prospects of nanofiber materials in Li-ion battery applications are delineated.

关键词： Nanofiber Lithium-ion battery Cathode Anode Separator Electrolyte

来源：评论

学校读者我要写书评

暂无评论

Nanoconfinement effect of nanoporous carbon electrodes for ionic liquid-based aluminum metal anode

引用

Journal of Energy Chemistry 2022年第11期31卷 121-127,I0005页

作者： Juhee Yoon Seongbak Moon Son Ha Hyung-Kyu Lim Hyoung-Joon Jin Young Soo Yun Program in Environmental and Polymer Engineering Inha UniversityIncheon 22212South Korea Department of Polymer Science and Engineering Inha UniversityIncheon 22212South Korea KU-KIST Graduate School of Converging Science and Technology Korea UniversitySeoul 02841South Korea Division of Chemical Engineering and Bioengineering Kangwon National UniversityGangwon-do 24341South Korea Department of Integrative Energy Engineering Korea UniversitySeoul 02841South Korea

Rechargeable aluminum batteries(RABs),which use earth-abundant and high-volumetric-capacity metal anodes(8040 m Ah cm-3),have great potential as next-generation power sources because they use cheaper resources to deliver higher energies,compared to current lithium ion ***,the mechanism of charge delivery in the newly developed,ionic liquid-based electrolytic system for RABs differs from that in conventional organic ***,targeted research efforts are required to address the large overpotentials and cycling decay encountered in the ionic liquid-based electrolytic *** this study,a nanoporous carbon(NPC)electrode with well-developed nanopores is used to develop a high-performance aluminum *** negatively charged nanopores can provide quenched dynamics of electrolyte molecules in the aluminum deposition process,resulting in an increased collision *** fast chemical equilibrium of anionic species induced by the facilitated anionic collisions leads to more favorable reduction reactions that form aluminum *** nanoconfinement effect causes separated nucleation and growth of aluminum nanoparticles in the multiple confined nanopores,leading to higher coulombic efficiencies and more stable cycling performance compared with macroporous carbon black and 2D stainless steel electrodes.

关键词： Nanoconfinement effect Nanoporous carbon Ionic liquid electrolyte Metal anode Aluminum batteries Multivalent batteries

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：