检索结果-内蒙古大学图书馆

arXiv 2020年

作者： Jiusti, Jeanini Cassar, Daniel R. Zanotto, Edgar D. Department of Materials Engineering Federal University of São Carlos Graduate Program in Materials Science and Engineering São Carlos SP Brazil

Glass forming ability (GFA) is a property of utmost importance in glass science and technology. In this paper, we used a statistical methodology-involving bootstrap sampling and the Wilcoxon test-to find out which glass stability parameters can better predict the glass forming ability. We collected or measured the necessary data for twelve stoichiometric oxide glasses that underwent predominant heterogeneous nucleation (the most common case). We found that some GS parameters could predict the GFA of these oxide glasses quite well, whereas others perform poorly. Parameter Kw was the top ranked, closely followed by the KH, γ, H', ΔTrg, and Kcr. Our results corroborate previous reports carried out using a smaller number of glasses, much less GS parameters, and less rigorous statistics. We also found that using Tc instead of Tx improved the predictive power of these parameters. Finally, the Jezica, the only parameter considered here that predicts the GFA without requiring the production of a glass piece (i.e., without relying on any crystallization information), ranked reasonably well in our analysis. Copyright © 2020, The Authors. All rights reserved.

关键词： Nucleation

来源：评论

学校读者我要写书评

暂无评论

Cold atmospheric plasma-enabled platelet vesicle incorporated iron oxide nano-propellers for thrombolysis

引用

materials Today Bio 2023年 23卷 100876页

作者： Jheng, Pei-Ru Chiang, Chia-Che Kang, Jiunn-Horng Fan, Yu-Jui Wu, Kevin C.-W. Chen, Yan-Ting Liang, Jia-Wei Bolouki, Nima Lee, Jyh-Wei Hsieh, Jang-Hsing Chuang, Er-Yuan Graduate Institute of Nanomedicine and Medical Engineering Graduate Institute of Biomedical Materials and Tissue Engineering Institute of Biomedical Optomechatronics International Ph.D. Program in Biomedical Engineering School of Biomedical Engineering College of Biomedical Engineering Professional Master Program in Artificial Intelligence in Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Physical Medicine and Rehabilitation Taipei Medical University Hospital Taipei Taiwan Institute of Biomedical Engineering & Nanomedicine National Health Research Institute Keyan Road Zhunan Miaoli City350 Taiwan Department of Chemical Engineering National Taiwan University No.1 Sec. 4 Roosevelt Rd Taipei10617 Taiwan Department of Plasma Physics and Technology Faculty of Science Masaryk University Brno Czech Republic Center for Plasma and Thin Film Technologies Ming Chi University of Technology New Taipei City Taiwan Department of Materials Engineering Ming Chi University of Technology New Taipei City Taiwan Cell Physiology and Molecular Image Research Center Taipei Medical University-Wan Fang Hospital Taipei11696 Taiwan

A new approach to treating vascular blockages has been developed to overcome the limitations of current thrombolytic therapies. This approach involves biosafety and multimodal plasma-derived theranostic platelet vesicle incorporating iron oxide constructed nano-propellers platformed technology that possesses fluorescent and magnetic features and manifold thrombus targeting modes. The platform is capable of being guided and visualized remotely to specifically target thrombi, and it can be activated using near-infrared phototherapy along with an actuated magnet for magnetotherapy. In a murine model of thrombus lesion, this proposed multimodal approach showed an approximately 80 % reduction in thrombus residues. Moreover, the new strategy not only improves thrombolysis but also boosts the rate of lysis, making it a promising candidate for time-sensitive thrombolytic therapy. © 2023 The Authors

关键词： Infrared devices

来源：评论

学校读者我要写书评

暂无评论

Optically Tunable Many-Body Exciton-Phonon Quantum Interference

引用

Advanced science 2024年第40期11卷 e2404741页

作者： Chang, Si-Jie Huang, Po-Chun Su, Jia-Sian Hsieh, Yu-Wei Quiroz Reyes, Carlos Jose Fan, Ting-Hsuan Sun, Han-Sheng Nguyem, Ai-Phuong Liu, Te-I Cheng, Ho-Wen Lin, Ching-Wei Hayashi, Michitoshi Yong, Chaw-Keong Department of Physics National Taiwan University Taipei10617 Taiwan Institute of Atomic and Molecular Sciences Academia Sinica Taipei106319 Taiwan International Ph.D. Program in Biomedical Engineering College of Biomedical Engineering Taipei Medical University New Taipei235603 Taiwan Department of Chemistry National Tsing Hua University Hsinchu300044 Taiwan International Graduate Program of Molecular Science and Technology National Taiwan University Taipei106319 Taiwan Center for Condensed Matter Sciences National Taiwan University Taipei10617 Taiwan Center of Atomic Initiative for New Materials National Taiwan University Taipei10617 Taiwan National Center for Theoretical Sciences Taipei10617 Taiwan

This study introduces a novel paradigm for achieving widely tunable many-body Fano quantum interference in low-dimensional semiconducting nanostructures, beyond the conventional requirement of closely matched energy levels between discrete and continuum states observed in atomic Fano systems. Leveraging Floquet engineering, the remarkable tunability of Fano lineshapes is demonstrated, even when the original discrete and continuum states are separated by over 1 eV. Specifically, by controlling the quantum pathways of discrete phonon Raman scattering using femtosecond laser pulses, the Raman intermediate states across the excitonic Floquet band are tuned. This manipulation yields continuous transitions of Fano lineshapes from antiresonance to dispersive and to symmetric Lorentzian profiles, accompanied by significant variations in Fano parameter q and Raman intensity spanning 2 orders of magnitude. A subtle shift in the excitonic Floquet resonance is further shown, achieved by controlling the intensity of the femtosecond laser, which profoundly modifies quantum interference strength from destructive to constructive interference. The study reveals the crucial roles of Floquet engineering in coherent light-matter interactions and opens up new avenues for coherent control of Fano quantum interference over a broad energy spectrum in low-dimensional semiconducting nanostructures. © 2024 The Author(s). Advanced science published by Wiley-VCH GmbH.

关键词： Femtosecond lasers

来源：评论

学校读者我要写书评

暂无评论

Investigations on Structural, Optical and Dielectric Properties of Titanium Dioxide Via Doping of Nitrogen and Copper Ions

SSRN

引用

SSRN 2024年

作者： Kaur, Gagandeep Thakur, Shailja Negi, Puneet Konwar, Ruhit Jyoti Kumar, Hemaunt Devi, Nisha Verma, Yogita Sharma, Anchal Sati, Prakash Chandra Dadhich, Himanshu Maru, Apexa Jhala, I.G. Shah, N.A. Solanki, P.S. Department of Physics Akal College of Basic Sciences Eternal University Baru Sahib 173101 India Centre of Excellence in Nanotechnology Faculty of Engineering & Technology Assam Down Town University Guwahati781026 India Department of Applied Science and Humanities Rajkiya Engineering College Bijnor246725 India Materials Science and Sensor Application CSIR-Central Scientific Instruments Organisation Chandigarh160030 India Academy of Scientific and Innovative Research Ghaziabad201002 India Department of Physics Rajiv Gandhi Government Post Graduate College Mandsaur458001 India Department of Physics Faculty of Basic and Applied Sciences Vivekananda Global University Jaipur303012 India Department of Physics Saurashtra University Rajkot360005 India

Pure anatase TiO2 nanoparticles and its mono–doped/co–doped derivatives [i.e. (TiN0.007O1.993), (Ti0.998Cu0.002O2) (Ti0.998Cu0.002N0.007O1.993)] were prepared by sol–gel auto–combustion technique. Further, the effects of copper (Cu) and nitrogen (N) dopants have been investigated on structural, optical and dielectric properties of nanostructured TiO2 using X–ray diffraction (XRD), Raman spectroscopy, UV–visible spectroscopy and dielectric spectroscopy measurement respectively. The Rietveld refinement analysis of XRD data and Raman spectra revealed that all the synthesized samples have pure anatase phase having tetragonal structure with space group of I41/amd. The pure anatase phase of doped samples illustrate the substitution of Cu2+ at Ti4+ sites and N3– at O2– sites in the TiO2 host lattice. The crystallite size of TiO2 and its derivatives has been observed in the range of 11–14 nm. The band gap of TiO2 reduced from 3.20 to 1.90 eV with mono–doping and co–doping of the N and Cu in TiO2 lattice as confirmed by UV–visible spectroscopy. This red–shift might be occur due to the possible formation of N–2p and Cu–3d localized levels during mono–doping, and the creation of isolated intermediate states in the case of co–doping. The dielectric spectroscopy was performed to investigate the electrical properties in details and explained in terms of structural and inherent ionic behaviour of various dopants. The detected band gap energies in N/Cu mono–doped and co–doped samples of anatase TiO2 fall within the visible spectrum, rendering them suitable for harnessing solar energy in photocatalysis and photovoltaic applications. © 2024, The Authors. All rights reserved.

关键词： Titanium dioxide

来源：评论

学校读者我要写书评

暂无评论

Atomistic Characterization of Impact Bonding in Cold Spray Deposition of Copper

SSRN

引用

SSRN 2022年

作者： Nikravesh, Y. Latypov, Marat I. Frantziskonis, G. Muralidharan, Krishna Department of Civil and Architectural Engineering and Mechanics University of Arizona TucsonAZ85721 United States Department of Materials Science and Engineering University of Arizona TucsonAZ85721 United States Graduate Interdisciplinary Program in Applied Mathematics University of Arizona TucsonAZ85721 United States Lunar and Planetary Laboratory University of Arizona TucsonAZ85721 United States

Using classical molecular dynamics, we investigate the cold-spray additive manufacturing process involving copper particles impacting a copper substrate. Specifically, we develop fundamental insights into the interplay between particle size, particle velocity and ensuing penetration depth of the particle and the effective adhesion strength that binds the impinging particle with the substrate. Equally importantly, we also establish a quantitative constitutive relationship that governs the process variables (i.e., particle size, particle velocity), the resulting particle penetration depth and impact bonding energy. By examining the formation and evolution of adiabatic shear bands and dislocation densities within the particle and the substrate, as well as by examining the structural evolution of the impinging particle as a function of process variables in conjunction with observations of material jetting, we shed light on the deformation mechanisms that govern the cold spray process, and provide a fundamental basis for understanding the presence of a critical velocity that must be overcome in order to promote strong adhesion of the particle with the substrate. Further, by developing a comprehensive constitutive relationship that relates the process variables to the resulting penetration of the particle and the extent of impact bonding, we enable the ability to upscale information derived at the nanometric scales to experimental scales. This work thus serves as a steppingstone in not only answering fundamental interrelationships that govern the cold spray process, but also in the quest for developing comprehensive integrated computational materials engineering models for optimizing the process conditions underlying the cold spray process. © 2022, The Authors. All rights reserved.

关键词： Molecular dynamics

来源：评论

学校读者我要写书评

暂无评论

Quantum simulation of an extended Dicke model with a magnetic solid

Communications Materials

引用

Communications materials 2024年第1期5卷 42页

作者： Marquez Peraca, Nicolas Li, Xinwei Moya, Jaime M. Hayashida, Kenji Kim, Dasom Ma, Xiaoxuan Neubauer, Kelly J. Fallas Padilla, Diego Huang, Chien-Lung Dai, Pengcheng Nevidomskyy, Andriy H. Pu, Han Morosan, Emilia Cao, Shixun Bamba, Motoaki Kono, Junichiro Department of Physics and Astronomy Rice University HoustonTX United States Department of Physics California Institute of Technology PasadenaCA United States Applied Physics Graduate Program Smalley–Curl Institute Rice University HoustonTX United States Division of Applied Physics Graduate School of Engineering Hokkaido University Hokkaido Japan Department of Electrical and Computer Engineering Rice University HoustonTX United States Department of Physics International Center of Quantum and Molecular Structures and Materials Genome Institute Shanghai University Shanghai China Department of Physics and Center for Quantum Frontiers of Research and Technology National Cheng Kung University Tainan Taiwan Department of Chemistry Rice University HoustonTX United States Department of Physics I Kyoto University Kyoto Japan The Hakubi Center for Advanced Research Kyoto University Kyoto Japan PRESTO Japan Science and Technology Agency Saitama Japan Department of Physics Yokohama National University Yokohama Japan Department of Materials Science and NanoEngineering Rice University HoustonTX United States

The Dicke model describes the cooperative interaction of an ensemble of two-level atoms with a single-mode photonic field and exhibits a quantum phase transition as a function of light–matter coupling strength. Extending this model by incorporating short-range atom–atom interactions makes the problem intractable but is expected to produce new physical phenomena and phases. Here, we simulate such an extended Dicke model using a crystal of ErFeO3, where the role of atoms (photons) is played by Er3+ spins (Fe3+ magnons). Through terahertz spectroscopy and magnetocaloric effect measurements as a function of temperature and magnetic field, we demonstrated the existence of a novel atomically ordered phase in addition to the superradiant and normal phases that are expected from the standard Dicke model. Further, we elucidated the nature of the phase boundaries in the temperature–magnetic-field phase diagram, identifying both first-order and second-order phase transitions. These results lay the foundation for studying multiatomic quantum optics models using well-characterized many-body solid-state systems. © The Author(s) 2024.

关键词： Atoms

来源：评论

学校读者我要写书评

暂无评论

Moiré exciton polaron engineering via twisted hBN

arXiv

引用

arXiv 2024年

作者： Cho, Minhyun Datta, Biswajit Han, Kwanghee Chand, Saroj B. Adak, Pratap Chandra Yu, Sichao Li, Fengping Watanabe, Kenji Taniguchi, Takashi Hone, James Jung, Jeil Grosso, Gabriele Kim, Young Duck Menon, Vinod M. Department of Physics Kyung Hee University 26 Kyungheedae-ro Seoul02447 Korea Republic of Department of Physics City College of New York New YorkNY10031 United States Photonics Initiative Advanced Science Research Center City University of New York New YorkNY10031 United States Department of Physics Department of Smart Cities University of Seoul Seoul02504 Korea Republic of Research Center for Electronic and Optical Materials National Institute for Materials Science 1-1 Namiki Tsukuba305-0044 Japan Research Center for Materials Nanoarchitectonics National Institute for Materials Science 1-1 Namiki Tsukuba305-0044 Japan Department of Mechanical Engineering Columbia University New YorkNY10027 United States Physics Program Graduate Center City University of New York New YorkNY10016 United States Department of Information Display Kyung Hee University Seoul02447 Korea Republic of

Twisted hexagonal boron nitride (thBN) exhibits emergent ferroelectricity due to the formation of moiré superlattices with alternating AB and BA domains. These domains possess electric dipoles, leading to a periodic electrostatic potential that can be imprinted onto other 2D materials placed in its proximity. Here we demonstrate the remote imprinting of moiré patterns from twisted hexagonal boron nitride (thBN) onto monolayer MoSe2 and investigate the resulting changes in the exciton properties. We confirm the imprinting of moiré patterns on monolayer MoSe2 via proximity using Kelvin probe force microscopy (KPFM) and hyperspectral photoluminescence (PL) mapping. By developing a technique to create large ferroelectric domain sizes ranging from 1 µm to 8.7 µm, we achieve unprecedented potential modulation of ∼ 387±52 meV. We observe the formation of exciton polarons due to charge redistribution caused by the antiferroelectric moiré domains and investigate the optical property changes induced by the moiré pattern in monolayer MoSe2 by varying the moiré pattern size down to ∼110 nm. Our findings highlight the potential of twisted hBN as a platform for controlling the optical and electronic properties of 2D materials for optoelectronic and valleytronic applications. © 2024, CC BY-NC-ND.

关键词： Boron nitride

来源：评论

学校读者我要写书评

暂无评论

Solution-Processed and Room-Temperature Spin Light-Emitting Diode Based on Quantum Dots/Chiral Metal-Organic Framework Heterostructure

引用

Advanced Functional materials 2023年第19期33卷

作者： Mustaqeem, Mujahid Chou, Pi-Tai Kamal, Saqib Ahmad, Naveed Lin, Jia-Yu Lu, Yu-Jung Lee, Xing-Hao Lin, Kung-Hsuan Lu, Kuang-Lieh Chen, Yang-Fang Nano-Science and Technology Program Taiwan International Graduate Program Institute of Physics Academia Sinica Taipei106 Taiwan Department of Physics National Taiwan University No. 1 Section 4 Roosevelt Rd Taipei10617 Taiwan Department of Chemistry National Taiwan University No. 1 Section 4 Roosevelt Rd Taipei10617 Taiwan Institute of Chemistry Academia Sinica Taipei115 Taiwan Department of Materials Science and Engineering National Taiwan University of Science and Technology Taipei10607 Taiwan Research Center for Applied Sciences Academia Sinica Taipei115024 Taiwan Institute of Physics Academia Sinica Taipei11529 Taiwan

Spin optoelectronics is an indispensable key for the future development of spintronics. In conventional spin light emitting diodes (LEDs), spin-polarized carrier pairs are injected electrically into the light emitting layer and create circularly polarized light (CPL). Generally, spin-polarized carriers are accomplished using ferromagnetic contacts or applying an external magnetic field, which will produce several drawbacks, including low temperature operation, low spin-polarized carriers injection efficiency, etc. To circumvent the existing shortcomings, here, an alternative approach is proposed and achieves spin-polarized LEDs at room temperature based on quantum dots (QDs)/chiral metal-organic framework heterojunction without using ferromagnetic contacts or magnetic fields. The spin-polarized injected layer composed of self-assembled monolayer (SAM)/Chiral-MOF ([Sr(9,10-adc)(DMAc)2]n)) film, which produces spin-polarized holes with spin orientation, determining the polarization and strength of circularly polarized electroluminescence (CP-EL). The spin-QLED emits CP-EL at a rate of 12.24% efficiency, which provides an excellent alternative to generate new functionality for conventional QLEDs. The approach is anticipated to be very useful, enabling to offer a general methodology for generating not yet realized spin optoelectronic devices. © 2023 Wiley-VCH GmbH.

关键词： Room temperature

来源：评论

学校读者我要写书评

暂无评论

Inside Back Cover: Reversible Handedness Inversion and Circularly Polarized Light Reflection Tuning in Self-Organized Helical Superstructures Using Visible-Light-Driven Macrocyclic Chiral Switches (Angew. Chem. Int. Ed. 8/2023)

引用

Angewandte Chemie International Edition 2023年第8期62卷

作者： Dr. Hao Wang Yuqi Tang Dr. Hari Krishna Bisoyi Prof. Quan Li Advanced Materials and Liquid Crystal Institute and Materials Science Graduate Program Kent State University Kent OH 44242 USA Institute of Advanced Materials and School of Chemistry and Chemical Engineering Southeast University Nanjing 211189 China

来源：评论

学校读者我要写书评

暂无评论

Multi-Level Hierarchical Nanoporous Structure by Additive Manufacturing and Dealloying

SSRN

引用

SSRN 2023年

作者： Kvaratskheliya, Askar Bianchini, Bruno Filimonov, Aleksandr Gomes, Leonardo Fernandes Macedo dos Santos, Rafael Formenton Gargarella, Piter Mädler, Lutz Okulov, Ilya Faculty ofProduction Engineering University ofBremen Badgasteiner Straße 2 28359Bremen Germany Leibniz Institute for Materials Engineering IWT Badgasteiner Straße 3 28359Bremen Germany Graduate Program in Materials Science andEngineering FederalUniversity ofSão Carlos Rod. Washington Luis km 235 SP São Carlos13565-905 Brazil Rod. Washington Luis Km 235 SP São Carlos13565-905 Brazil Rod. Washington Luis Km 235 SP São Carlos13565-905 Brazil MAPEX- Center for Materials andProcesses University ofBremen Bremen28359 Germany

Hierarchical nanoporous materials feature a unique set of physical, mechanical, and chemical properties which make them promising in various technological applications. This paper presents a novel approach to synthesise bulk (centimetre size) hierarchical Cu structures featuring three levels of porosity: (i) design of lattice structures for the mm-scale porosity by additive manufacturing;(ii) design of phase composition for the µm-scale porosity;(iii) and chemical dealloying for the nm-scale porosity. During the first step, a lattice structure composed of the Cu50Al50 wt. % precursor material was manufactured by laser powder bed fusion. The precursor consists of Cu2Al and Al phases. Second, the Al phase was etched from the Cu50Al50 precursor by corrosion in the NaOH solution. Third, the nanoporous Cu was formed by dealloying of the Cu2Al phase in the NaOH solution. The current approach paves the way for advancing the functionality of nanoporous materials via their multi-level hierarchical organization. © 2023, The Authors. All rights reserved.

关键词： Additives

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：