检索结果-内蒙古大学图书馆

Enhancing Stability and Performance in Perovskite Solar Cells Through Rationally Designed Phenanthro[9,10-D]Imidazole Derivatives for Tailored Interfacial engineering

SSRN

引用

SSRN 2024年

作者： Sun, Shih-Sheng Ramanujam, Rajarathinam Shi, Zhong-En Lung, Chien-Yu Li, Sie-Rong Wei, William Wu Wang, Chi-Chun Chen, Chih Ping Institute of Chemistry Academia Sinica Nankang Taipei11529 Taiwan Taiwan International Graduate Program Sustainable Chemical Science and Technology Academia Sinica Nankang Taipei11529 Taiwan Department of Applied Chemistry National Yang Ming Chiao Tung University Hsinchu30050 Taiwan Department of Materials Engineering Organic Electronics Research Center Ming Chi University of Technology 84 Gunjuan Road Taishan New Taipei City24301 Taiwan Taipei Fuhsing Private School 262 Section 1 Dun-Hua South Road Taipei Taiwan College of Engineering Center for Sustainability and Energy Technologies Chang Gung University Taoyuan City33302 Taiwan

Interfacial engineering techniques play a significant role in the development of perovskite solar cells (PSCs). In inverted PSCs, nickel oxide (NiOx) is commonly used as a hole transport material (HTM). The poor interactions at the NiOx/CH3NH3PbI3 (MAPbI3) interface contributed to the low stability and power conversion efficiency (PCE) in devices. To address this issue, dopant-free ultrathin interfacial layers (IFLs) have been introduced between the NiOx and perovskite. These IFLs enhance the chemical interaction between the NiOx and perovskite interfaces and result in improved device performance. Herein, T-shape phenanthro[9,10-d]imidazole derivatives, SR-1 and SR-2, were designed and synthesized. The SR-molecules were employed as IFL materials in p-i-n devices with a device configuration of ITO/NiOx/IFL/MAPbI3/PCBM/BCP/Ag. Notably, the IFLs serve multiple functions: modifying the energy levels of NiOx, improving the surface roughness and crystallinity of MAPbI3, passivating defects, enhancing charge extraction, and reducing trap density at the NiOx/MAPbI3 interface. As a result, the PCEs of both devices with SR-1 and SR-2 IFLs outperformed that of the pristine device. The best performance of 20.3% efficiency with nearly negligible hysteresis was achieved from the device with SR-1. The devices with SR-molecules achieved remarkable thermal stability under ambient air conditions and continuous heating at 60 °C with 50-60% relative humidity. © 2024, The Authors. All rights reserved.

关键词： Thermodynamic stability

来源：评论

学校读者我要写书评

暂无评论

CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

引用

Chemical engineering Journal 2024年 490卷

作者： Lin, Jia-Cheng Kaswan, Kuldeep Chatterjee, Subhodeep Wu, Yu-Wen Kumar Sharma, Manish Ranjan, Ashok Roy Barman, Snigdha Lin, Yu-Zih Burnouf, Thierry Boireau, Wilfrid Lu, Ming-Yen Tu, Yong-Kwang Su, I-Chang Wu, Ping-Hsiu Lin, Zong-Hong Fan, Yu-Jui School of Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Taipei Neuroscience Institute Taipei Medical University Taipei11031 Taiwan Department of Biomedical Engineering National Taiwan University Taipei11031 Taiwan International Intercollegiate PhD Program National Tsing Hua University Hsinchu30013 Taiwan Department of Power Mechanical Engineering National Tsing Hua University Hsinchu30013 Taiwan Graduate Institute of Biomedical Materials and Tissue Engineering Taipei Medical University Taipei11031 Taiwan Department of Material Science and Engineering National Tsing Hua University Hsinchu30013 Taiwan Institute of Biomedical Engineering National Tsing Hua University Hsinchu30013 Taiwan International PhD Program in Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Université de Franche-Comté CNRS Institut FEMTO-ST BesançonF-25030 France Department of Neurosurgery Shuang Ho Hospital Taipei Medical University New Taipei City23561 Taiwan Department of Surgery School of Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Radiology School of Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Radiation Oncology Taipei Medical University Hospital Taipei11031 Taiwan Center for Precision Health and Quantitative Sciences Taipei Medical University Hospital Taipei 11031 Taiwan

Blood platelet count significantly affects the development of severe conditions like myocardial infarction, peripheral arterial ischemia, respiratory compromise, stroke, diabetes, coronavirus disease 2019 (COVID-19), along with chemotherapy patients and those suffering cardiovascular diseases (CVDs). These conditions necessitate frequent monitoring of platelet counts to guide diagnostic and therapeutic decisions. However, existing techniques are relatively time-consuming, lack of accuracy and require precise operation. The emergence of these severe diseases underscored the need to develop advanced platelet count-monitoring techniques which are rapid, highly precise, and conveniently portable for point-of-care applications. In this study, we emphasized the development of a triboelectric microfluidic nanosensor (TMNS) for platelet quantification through the assessment of flow resistance. The functionality of TMNS device is based on immobilization of platelets on a collagen layer coated inside a microfluidic channel. The triboelectric voltage output is measured as a detection signal of the flow resistance and is enhanced by incorporating high surface area copper oxide nanowires (CuO NWs) on the interior of copper tubes. These copper tubes serve as terminal electrodes and for flow guiding. The flow resistance of plasma solutions is elevated when the platelet concentration increases due to heightened adherence of platelets onto the collagen layer. Variations in flow resistance induce alterations in contact electrification, causing changes in output voltage at load terminals. Fine-tuning of the TMNS device was achieved by optimizing the channel width and length, flowing liquid viscosity, and voltage measurement technique. Platelet quantification sensing data were acquired through the combination of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) solutions. The described device exhibits promising capabilities for platelet-count monitoring in whole-blood samples c

关键词： Copper oxides

来源：评论

学校读者我要写书评

暂无评论

Manipulation of the nanoscale heliconical structure of a twist-bend nematic material with polarized light

引用

Physical Review Research 2020年第3期2卷 032004(R)-032004(R)页

作者： C. Feng J. Feng R. Saha Y. Arakawa J. Gleeson S. Sprunt C. Zhu A. Jákli Chemical Physics Interdisciplinary Program Advanced Materials and Liquid Crystal Institute Kent State University Kent Ohio 44242 USA Advanced Light Source Lawrence Berkeley National Lab Berkeley California 94720 USA Department of Physics Kent State University Kent Ohio 44242 USA Department of Applied Chemistry and Life Science Graduate School of Engineering Toyohashi University of Technology Toyohashi 441-8580 Japan

The effect of polarized violet light on the alignment and the heliconical pitch of a liquid crystal dimer containing both sulfur atoms and an azo linkage has been studied by tender resonant x-ray scattering. The results provide evidence of the manipulation of the nanoscale heliconical structure by polarized light. In addition to the bulk alignment of the heliconical nanostructure, the value of the heliconical pitch can be varied as well. After turning the light on, an increase of the pitch is observed in two steps. The increase with a subsecond timescale is attributed to the reduced heliconical order related to trans-cis photoisomerization. This is followed by a smaller increase over a 10-s timescale, which is likely related to the annihilation of defects. After turning the light off, the pitch first decreases within a few seconds to a value larger than the original (before illumination), and then relaxes further on a much longer (hours) timescale.

关键词： Chiral symmetry Dynamical phase transitions Twist deformation

来源：评论

学校读者我要写书评

暂无评论

Deactivation/Regeneration Studies in Structured Monolithic Ni-Based Catalysts Applied in Dry Reforming of Methane

SSRN

引用

SSRN 2022年

作者： de Araújo, Ítalo R.S. Ribeiro, André T.S. Garcia, Ramón R.P. Sales, Deivson C.S. Almeida, Luciano C. Department of Chemical Engineering Technology and Geoscience Center Federal University of Pernambuco PE Recife50740-521 Brazil Polytechnic School of Pernambuco University of Pernambuco Rua Benfica 455 Madalena PE Recife50720-001 Brazil Materials Science and Engineering Graduate Program Federal University of Piauí PI Teresina Brazil Federal Rural University of Pernambuco Academic Unit of Cabo de Santo Agostinho PE Cabo de Santo Agostinho Brazil

In this work, the Ni/γ-Al2O3 (Ni/Al) and Ni/LA2O3-γ-Al2O3 (Ni/La-Al) catalysts were synthesized by the all-in-one method and used in the Dry Reforming of Methane (DRM). The catalysts were characterized and a smaller Ni crystallite size for the La-promoted catalyst was observed. The effects of the feed ratio (CH4:CO2), the use of La as a promoter of the catalyst support, and the use of the structured system in DRM reaction were investigated. Raman spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) were applied to investigate the catalytic deactivation effects. The deactivation of the structured catalysts was also evaluated by applying different weight hourly space velocities (WHSV): 20, 30, and 40 L gcat-1 h-1. Besides that, the regeneration of the catalysts was developed through the comparison of the treatment with CO2 and H2 atmospheres. The catalytic study of the powder samples showed that the lower the CH4:CO2 ratio the higher reactants conversion for both catalysts. It was also noted that the CH4:CO2 feed ratio of 4 provided a conversion 10 % higher for the Ni/La-Al catalyst in comparison with the Ni/Al catalyst. The analogy between the powder and structured systems implied greater conversion for the structured system. Furthermore, the greater and the lower deactivation of the structured systems were identified for the WHSV values of 40 and 20 L gcat-1 h-1, respectively. Finally, the regeneration treatment with CO2 showed to be more efficient than the treatment with H2 © 2022, The Authors. All rights reserved.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Bioplastics from orange processing waste and poly(lactic acid)

Future Foods

引用

Future Foods 2025年 11卷

作者： Laís T. Possari Marina S. de Paula George F. Nunes Iago A. Reis Marcos V. Basaglia Caio G. Otoni Sílvia H.P. Bettini Federal University of São Carlos (UFSCar) Graduate Program in Materials Science and Engineering (PPGCEM) São Carlos SP 13565-905 Brazil Federal University of São Carlos (UFSCar) Department of Materials Engineering (DEMa) São Carlos SP 13565-905 Brazil University of Campinas (UNICAMP) Institute of Chemistry Campinas SP 13083-862 Brazil

Bioplastics have the potential to mitigate the aggravating crisis of plastic pollution. Valorizing agri-food side streams for such a purpose is particularly beneficial as it valorizes massively produced waste, thus contributing to the shift towards circular and regenerative productive chains. In this work, citrus pulp (CP) obtained as a by-product from orange juice production was upcycled into thermoplastic compounds via extrusion-assisted plasticization with glycerol. Compounds with poly(lactic acid) (PLA) were then produced by extrusion melt blending. An experimental 2² factorial design with a central point was performed to evaluate their mechanical, thermal, and biodegradation behavior. The levels for the variables plasticized CP (PCP) and glycerol contents were 30 and 70 % for PCP, and 40 and 60 % for glycerol. Calorimetry showed that PCP increased PLA free volume and chain mobility. Still, the different fractions of PCP and glycerol did not alter the melting behavior of the compounds significantly. PCP led to a progressive toughening effect on PLA. Mass loss after 90 d of soil burial reached 53–64 % for the formulations containing 70 % PCP, and PLA chain scission was accelerated at 30 % PCP with 60 % glycerol, and 70 % PCP with 40 % glycerol. This work opens new pathways to citrus biomass valorization by exploring CP, a scarcely investigated residue, and a novel processing strategy. The produced compounds can be applied as bio-based semi-rigid packaging and utensils.

关键词： Biodegradable plastic PLA Biomass Food waste Upcycling Citrus sinensis

来源：评论

学校读者我要写书评

暂无评论

Terahertz Landau Polaritons in Nano-slots: Ultrastrong Coupling under Extreme Spatial Confinement

Terahertz Landau Polaritons in Nano-slots: Ultrastrong Coupl...

引用

International Conference on Infrared and Millimeter Waves

作者： Dasom Kim Sunghwan Kim Dukhyung Lee Shuang Liang Fuyang Tay Michael J. Manfra Dai-Sik Kim Junichiro Kono Department of Electrical and Computer Engineering Rice University Houston TX USA Applied Physics Graduate Program Smalley-Curl Institute Rice University Houston TX USA Department of Physics Long-wavelength Nanotechnology Laboratory and Quantum Photonics Institute Ulsan National Institute of Science and Technology (UNIST) Ulsan South Korea Department of Physics and Astronomy Purdue University West Lafayette IN USA Birck Nanotechnology Center Purdue University West Lafayette IN USA Elmore Family School of Electrical and Computer Engineering Purdue University West Lafayette IN USA School of Materials Engineering Purdue University West Lafayette IN USA Department of Physics and Astronomy Rice University Houston TX USA Department of Material Science and NanoEngineering Rice University Houston TX USA

We report ultrastrong coupling of the cyclotron resonance of a two-dimensional electron gas in a GaAs quantum well to terahertz cavity photons under extreme confinement to the nanometer scale. This was realized by an array of nano-slots fabricated close to the quantum well layer on the GaAs substrate. Our terahertz magnetospectroscopic measurements revealed two polariton branches as a function of applied magnetic field. While the photon-like part of the two polariton branches was clearly observed, the matter-like part was generally elusive. Our electromagnetic simulations quantitatively reproduce our observation for the upper-polariton branch. However, for the lower-polariton branch, our simulations predict a pronounced resonance, which was absent in experimental spectra. This discrepancy may be a consequence of the breakdown of the dipole approximation in this extreme confinement situation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effect of Tio2 Support for Co Nanoparticle Catalysts for Hydrogen Generation from Nabh4 Hydrolysis

SSRN

引用

SSRN 2022年

作者： Altaf, Cigdem Tuc Colak, Tuluhan O. Minkina, Valentina G. Shabunya, Stanislav I. Sankir, Mehmet Demirci Sankir, Nurdan Kalinin, Vladimir I. Micro and Nanotechnology Graduate Program TOBB University of Economics and Technology Sogutozu Caddesi No 43 Sogutozu Ankara06560 Turkey A.V. Luikov Heat and Mass Transfer Institute The National Academy of Sciences of Belarus P. Brovka 15 Minsk220072 Belarus Department of Materials Science and Nanotechnology Engineering TOBB University of Economics and Technology Sogutozu Caddesi No 43 Sogutozu Ankara06560 Turkey

The influence of the structural differences in TiO2 (Degussa P25 and Mesh 325) as supporting materials for Co nanoparticles has been revealed in aqueous and alkaline NaBH4 hydrolysis. The activation energies for TiO2 (Mesh 325)/Co and Co/TiO2 (P25)/Co catalysts in aqueous solution of NaBH4 were 64.3 kJ . mol-1 and 56.76 kJ . mol-1, respectively. On the other hand, the activation energy values of the hydrolysis process in alkaline NaBH4 solutions using TiO2 (Mesh 325)/Co and TiO2 (P25)/Co catalysts have been calculated as 55 kJ . mol-1 and 45.2 kJ . mol-1, respectively. Consequently, hydrogen generation rate (HGR) for TiO2(Mesh 325)/Co and TiO2(P25)/Co in an aqueous-alkaline solution are 145 and 363 ml . min . gcat-1, respectively which are twice higher in that of aqueous NaBH4 hydrolysis reaction. © 2022, The Authors. All rights reserved.

关键词： Hydrolysis

来源：评论

学校读者我要写书评

暂无评论

Tailoring the Microstructure of a Cu-0.7cr-0.07zr Alloy Submitted to Ecap at Cryogenic Temperature for Improved Thermal Stability

SSRN

引用

SSRN 2022年

作者： Oliveira, Pedro H.F. Magalhães, Danielle Cristina Camilo Unti, Luiz Fernando K. Cintho, O.M. Kliauga, Andrea M. Sordi, Vitor Luiz Federal University of São Carlos Graduate Program in Materials Science and Engineering Rod. Washington Luís km 235 São Carlos SP CEP 13565-905 Brazil Federal University of São Carlos Department of Materials Engineering Rod. Washington Luís km 235 São Carlos SP CEP 13565-905 Brazil Department of Mechanical Engineering Aeronautics Institute of Technology Praça Marechal Eduardo Gomes 50 SP São José dos CamposCEP 12228-900 Brazil Department of Materials Engineering State University of Ponta Grossa Av. General Carlos Cavalcanti PR Ponta GrossaCEP 84030-900 Brazil

Severe Plastic Deformation (SPD) routes, such as Equal Channel Angular Pressing (ECAP), are capable of producing ultrafine-grained (UFG) materials with outstanding mechanical properties. Although grain refinement and the increase in mechanical processing could be enhanced through ECAP processing at cryogenic temperatures, this route presents the drawback of microstructural instability, which is responsible for reversing the gain in mechanical properties and microstructural refinement when the material is stored at room temperature or submitted to relatively high temperatures. Aiming to design severely deformed and stable microstructures, this study investigated pure copper (Cu) and a commercial ITER-grade Cu-0.7Cr-0.07Zr alloy submitted to ECAP at 298 and 123 K followed by annealing heat treatments. ECAP processing introduced a high density of dislocations and vacancy concentration in the materials assessed. Pure Cu showed poor microstructural stability when long-term stored at room temperature after ECAP processing at cryogenic temperatures, and when submitted to annealing post-ECAP processing. In contrast, the Cu-0.7Cr-0.07Zr alloy submitted to cryo-ECAP showed outstanding thermal stability even when submitted to annealing at 673 K for 120 min. For this alloy, the fine Cr-rich precipitates were responsible for preventing static recovery and preserving a grain size of ~6.6 μm and an area fraction of recrystallized grains of 6.2%. Finally, it was possible to pave the way for the design of refined and stable microstructures after cryo-SPD processing. © 2022, The Authors. All rights reserved.

关键词： Equal channel angular pressing

来源：评论

学校读者我要写书评

暂无评论

Photoactivated theranostic nanomaterials based on aggregation-induced emission luminogens for cancer photoimmunotherapy

Responsive Materials

引用

Responsive materials 2024年第2期2卷

作者： Yuqi Tang Xing Wang Shilin Chen Quan Li Institute of Advanced Materials and School of Chemistry and Chemical Engineering Southeast University Nanjing China Department of Thoracic Surgery The Affiliated Cancer Hospital of Nanjing Medical University Jiangsu Cancer Hospital and Jiangsu Institute of Cancer Research Nanjing China Materials Science Graduate Program Kent State University Kent Ohio USA

In this study, a series of high liposoluble near-infrared emissive aggregation-induced emission luminogens with triphenylamine derivatives as donor units and 1-indanone as electron acceptor units are developed. Specifically, MTTOI has promising lipid droplets targeting ability and viscosity-response characteristics, and it can monitor the viscosity fluctuations in living cells in real time. It is found that MTTOI is able to fulfill the activation of the apoptosis-related signaling pathways under white light, and it can also activate the ferroptosis to synergize apoptosis resulting in tumor elimination. Interestingly, the occurrence of ferroptosis is positively related to the enhancement of immunogenic cell-death effect, thus boosting the tumor infiltration of CD8 + T cells and reducing the proportion of regulatory T cells by cooperating with dendritic cells, which can not only carry out primary antitumor treatment, but also prevent tumor metastasis through strong immunological memory effect. Moreover, in vivo experimental results confirm that MTTOI successfully effectuates fatty liver tissue imaging. MTTOI fluorescence signals can be captured at the tumor site after 3 days of administration due to its high fat-solubility and ease of fusion with tumors. This classic example could promote the further development of phototherapeutic agents in preclinical research and clinical applications.

关键词： cancer photoimmunotherapy ferroptosis near-infrared aggregation-induced emission luminogen photoactivated theranostic nanomaterial viscosity response

来源：评论

学校读者我要写书评

暂无评论

Influence of Crystallization on Corrosion and Mechanical Properties of Two Novel Fecrmonbb and Fecrmonib Amorphous Alloys

SSRN

引用

SSRN 2022年

作者： Batalha, Weverson Capute Roche, Virginie Champion, Yannick Mantel, Marc Verdier, Marc Martin, Vincent Kiminami, Claudio Shyint Jorge Junior, Alberto Moreira Moreira Univ. Grenoble Alpes Univ. Savoie Mont Blanc CNRS Grenoble INP LEPMI Grenoble38000 France Institute of Engineering and Management Univ. Grenoble Alpes France Univ. Grenoble Alpes Univ. Savoie Mont Blanc CNRS Grenoble INP SIMAP Grenoble38000 France Graduate Program of Materials Science and Engineering Federal University of São Carlos DEMa São Carlos13565-905 Brazil

The influence of thermally induced devitrification on microstructure, corrosion, and mechanical properties of two novel Fe-based amorphous alloys has been investigated in this work (FeCrMoXB, where X=Nb, Ni). Hence, providing an overview of the perspectives for using these new alloys as coatings. Ribbons were produced by melt spinning. Samples were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM), accompanied by chemical analysis via energy dispersive spectroscopy (EDS). As-cast ribbons were amorphous. Considering DSC data of such ribbons, they were heat-treated under an Ar protective atmosphere to simulate crystallization that may occur during coating processing. The mechanical behavior was evaluated by nanoindentation. High hardness (around 14 GPa) and elastic modulus (>220 GPa) were identified for both compositions. Corrosion properties were analyzed by potentiodynamic polarization in seawater at three different pHs. Both compositions in the amorphous state exhibited outstanding corrosion resistance, forming a broad passivation plateau in the various media analyzed. After devitrification, the Nb-containing alloy preserved excellent corrosion behavior, with a slight decrease in corrosivity up to 720°C, better than the Ni-containing alloy that exhibited lower corrosion resistance with good corrosivity kept only up to 690°C. Results indicate outstanding corrosion behavior and wear resistance, indicating that these materials are promising for coating application through different techniques. © 2022, The Authors. All rights reserved.

关键词： Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：