检索结果-内蒙古大学图书馆

CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

引用

Chemical engineering Journal 2024年 490卷

作者： Lin, Jia-Cheng Kaswan, Kuldeep Chatterjee, Subhodeep Wu, Yu-Wen Kumar Sharma, Manish Ranjan, Ashok Roy Barman, Snigdha Lin, Yu-Zih Burnouf, Thierry Boireau, Wilfrid Lu, Ming-Yen Tu, Yong-Kwang Su, I-Chang Wu, Ping-Hsiu Lin, Zong-Hong Fan, Yu-Jui School of Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Taipei Neuroscience Institute Taipei Medical University Taipei11031 Taiwan Department of Biomedical Engineering National Taiwan University Taipei11031 Taiwan International Intercollegiate PhD Program National Tsing Hua University Hsinchu30013 Taiwan Department of Power Mechanical Engineering National Tsing Hua University Hsinchu30013 Taiwan Graduate Institute of Biomedical Materials and Tissue Engineering Taipei Medical University Taipei11031 Taiwan Department of Material Science and Engineering National Tsing Hua University Hsinchu30013 Taiwan Institute of Biomedical Engineering National Tsing Hua University Hsinchu30013 Taiwan International PhD Program in Biomedical Engineering Taipei Medical University Taipei11031 Taiwan Université de Franche-Comté CNRS Institut FEMTO-ST BesançonF-25030 France Department of Neurosurgery Shuang Ho Hospital Taipei Medical University New Taipei City23561 Taiwan Department of Surgery School of Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Radiology School of Medicine College of Medicine Taipei Medical University Taipei11031 Taiwan Department of Radiation Oncology Taipei Medical University Hospital Taipei11031 Taiwan Center for Precision Health and Quantitative Sciences Taipei Medical University Hospital Taipei 11031 Taiwan

Blood platelet count significantly affects the development of severe conditions like myocardial infarction, peripheral arterial ischemia, respiratory compromise, stroke, diabetes, coronavirus disease 2019 (COVID-19), along with chemotherapy patients and those suffering cardiovascular diseases (CVDs). These conditions necessitate frequent monitoring of platelet counts to guide diagnostic and therapeutic decisions. However, existing techniques are relatively time-consuming, lack of accuracy and require precise operation. The emergence of these severe diseases underscored the need to develop advanced platelet count-monitoring techniques which are rapid, highly precise, and conveniently portable for point-of-care applications. In this study, we emphasized the development of a triboelectric microfluidic nanosensor (TMNS) for platelet quantification through the assessment of flow resistance. The functionality of TMNS device is based on immobilization of platelets on a collagen layer coated inside a microfluidic channel. The triboelectric voltage output is measured as a detection signal of the flow resistance and is enhanced by incorporating high surface area copper oxide nanowires (CuO NWs) on the interior of copper tubes. These copper tubes serve as terminal electrodes and for flow guiding. The flow resistance of plasma solutions is elevated when the platelet concentration increases due to heightened adherence of platelets onto the collagen layer. Variations in flow resistance induce alterations in contact electrification, causing changes in output voltage at load terminals. Fine-tuning of the TMNS device was achieved by optimizing the channel width and length, flowing liquid viscosity, and voltage measurement technique. Platelet quantification sensing data were acquired through the combination of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) solutions. The described device exhibits promising capabilities for platelet-count monitoring in whole-blood samples c

关键词： Copper oxides

来源：评论

学校读者我要写书评

暂无评论

Low-Temperature Synthesis of Weakly Confined Carbyne inside Single-Walled Carbon Nanotubes

arXiv

引用

arXiv 2024年

作者： Zhang, Bo-Wen Qiu, Xi-Yang Ma, Yicheng Hu, Qingmei Fitó-Parera, Aina Kohata, Ikuma Feng, Ya Zheng, Yongjia Zhang, Chiyu Matsuo, Yutaka Wang, YuHuang Chiashi, Shohei Otsuka, Keigo Xiang, Rong Levshov, Dmitry I. Cambré, Sofie Wenseleers, Wim Rotkin, Slava V. Maruyama, Shigeo Department of Mechanical Engineering The University of Tokyo Tokyo113-8656 Japan State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical Engineering Zhejiang University Hangzhou310027 China Theory and Spectroscopy of Molecules and Materials Department of Physics University of Antwerp Antwerp2610 Belgium Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education School of Energy and Power Engineering Dalian University of Technology Liaoning 116024 China Department of Chemistry and Biochemistry Chemical Physics Program Maryland Nano Center University of Maryland College ParkMD20742 United States Department of Chemical Systems Engineering Graduate School of Engineering Nagoya University Nagoya464-8603 Japan Institute of Materials Innovation Institutes for Future Society Nagoya University Nagoya464-8603 Japan Theory and Spectroscopy of Molecules and Materials Department of Chemistry University of Antwerp Antwerp2610 Belgium Nanostructured and Organic Optical and Electronic Materials Department of Physics University of Antwerp Antwerp2610 Belgium Materials Research Institute Department of Engineering Science & Mechanics The Pennsylvania State University University ParkPA16802 United States

Carbyne, a one-dimensional (1D) carbon allotrope with alternating triple and single bonds, has the highest known mechanical strength but is unstable to bending, limiting synthesis to short linear chains. Encapsulation within carbon nanotubes (CNTs) stabilizes carbyne, forming confined carbyne (CC), thus enabling further research concerning attractive 1D physics and materials properties of carbyne. While CC has been synthesized in multi-walled CNTs (MWCNTs) using the arc-discharge method and in double-walled CNTs (DWCNTs) via high-temperature high-vacuum (HTHV) method, synthesis in single-walled CNTs (SWCNTs) has been challenging due to their fragility under such conditions. In this work, we report a low-temperature method to synthesize CC inside SWCNTs (CC@SWCNT). By annealing SWCNTs containing ammonium deoxycholate (ADC) at 400°C, ADC is converted into CC without damaging the SWCNTs. Raman spectroscopy revealed a strong CC phonon (CC-mode) peak at 1860–1870 cm-1, much stronger than the SWCNT G-band peak, confirming a high fraction of CC in the resulting material. The Raman mapping result showed the uniformity of the CC-mode signal across the entire film sample, proving the high efficiency of this method in synthesizing CC in every SWCNT of appropriate size. Notably, the CC-mode peaks of CC@SWCNT (above 1860 cm-1) are higher than those reported in previous CC@CNT samples (mostly -1). This is attributed to larger SWCNT diameters (>0.95 nm) used in this study, compared to the typical 0.6–0.8 nm range. Larger diameters result in reduced confinement, allowing carbyne to closely resemble free-standing carbyne while remaining stabilized. This low-temperature synthesis of long-chain, nearly freestanding carbyne within large-diameter SWCNTs offers new opportunities for exploring 1D physics and the unique properties of carbyne for potential applications. © 2024, CC BY-NC-ND.

关键词： Single-walled carbon nanotubes (SWCN)

来源：评论

学校读者我要写书评

暂无评论

Bulk passivation of perovskite films utilizing halide anion ionic liquids

引用

International Journal of Thermofluids 2023年 20卷

作者： Alashkar, Adnan Ayoub, Mohamad Ibrahim, Taleb Khamis, Mustafa Nancarrow, Paul Alami, Abdul Hai Tabet, Nouar PhD Program in Materials Science and Engineering American University of Sharjah Sharjah 26666 United Arab Emirates Sustainable and Renewable Energy Engineering Department University of Sharjah Sharjah 27272 United Arab Emirates Sustainable Energy & Power Systems Research Centre RISE University of Sharjah Sharjah 27272 United Arab Emirates Department of Chemical Engineering American University of Sharjah Sharjah 26666 United Arab Emirates Department of Biology Chemistry and Environmental Sciences College of Arts and Sciences American University of Sharjah Sharjah 26666 United Arab Emirates Center for Advanced Materials Research Research Institute of Science and Engineering University of Sharjah Sharjah 27272 United Arab Emirates Department of Applied Physics and Astronomy University of Sharjah Sharjah 27272 United Arab Emirates

Chemical additives to perovskite precursors constitute a predominant route to passivate defects in perovskite films and improve carrier charge dynamics. In this work, ionic liquids (ILs) with chloride and iodide anions are used as additives for bulk passivation of perovskite films. The ionic liquids in the form of 1‑butyl‑4-methylpyradinium iodide (IL-I) and 1-ethylimidazolium chloride (IL-Cl) are mixed individually with a precursor of Cesium Formamidinium Lead Triiodide and Methylammonium Chloride (CsFAPbI3−MACl). The decay of charge carriers within the perovskite film before and after passivation with ILs was measured by Time Resolved Photoluminescence Spectroscopy (TRPL). The effect of added ILs on the recombination rate of the photocarriers was investigated by analyzing the decay of the TRPL signal in all samples. The average lifetimes obtained within one day of preparations were 79 ns, 73 ns and 275 ns for pristine perovskite, IL-I passivated perovskite and IL-Cl passivated perovskite films, respectively. These values show that the presence of the IL with chloride anion greatly improves the average lifetime of the charge carrier by around 250%, while IL with iodide anion decreased the lifetime by 32% as compared with the pristine perovskite sample. This finding renders the IL-Cl passivated perovskite films as a valuable resource in applications ranging from photoelectric to hydrogen generation devices. © 2023

关键词： Ionic liquids

来源：评论

学校读者我要写书评

暂无评论

Water management and conductivity studies in novel polymer zirconium-based membranes for PEM fuel cells

引用

Case Studies in Chemical and Environmental engineering 2025年 11.0卷

作者： Ahmed, Tallah Magdi Al Othman, Amani Shamayleh, Abdulrahim Tawalbeh, Muhammad Engineering Systems Management Graduate Program American University of Sharjah PO. Box 26666 Sharjah United Arab Emirates Department of Chemical and Biological Engineering American University of Sharjah PO. Box 26666 Sharjah United Arab Emirates Energy Water and Sustainable Environment Research Center American University of Sharjah PO. Box 26666 Sharjah United Arab Emirates Department of Industrial Engineering American University of Sharjah PO. Box 26666 Sharjah United Arab Emirates Sustainable and Renewable Energy Engineering Department University of Sharjah PO. Box 27272 Sharjah United Arab Emirates Sustainable Energy & Power Systems Research Centre RISE University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates

Proton exchange membrane fuel cells (PEMFCs) are among the promising alternatives for clean energy generation, especially when hydrogen is the fuel used. Their operation is still faced with several challenges, and one of them is water accumulation in the cathode compartment. If PEMFCs are operated at temperatures above the boiling point of water, a significant obstacle would be eliminated due to the formation of water in the vapor phase. This prevents water from accumulating in the liquid phase which causes flooding. Therefore, this work aims to develop a novel composite membrane based on zirconium silicate (ZrSiO₄) and Polyvinylidene fluoride (PVDF) for such high-temperature operation. The composite membrane was synthesized using solution casting, and its structural and chemical properties were characterized using thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) techniques. The ZrSiO₄/PVDF membrane demonstrated a maximum proton conductivity of 2.14 × 10⁻³ S/cm at room temperature with 8 wt% ZrSiO₄, along with a water uptake value of 43.85 %. Consequently, when tested above the boiling point of water, the membrane exhibited a high conductivity of 2.13 × 10⁻³ S/cm at 105 °C. The results suggest the suitability of such zirconium silicate-based composite membranes for fuel cell applications operating above the boiling point of water. © 2024 The Author(s)

关键词： Composite membranes PEM fuel cells Proton conduction PVDF Water management Zirconium silicate

来源：评论

学校读者我要写书评

暂无评论

A Passive Integration Unit for Current-Feed Single-Switch Resonant Converter 12

A Passive Integration Unit for Current-Feed Single-Switch Re...

引用

12th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2020

作者： Deng, Cheng Bo, Jiang Escobar-Mejia, Andres College of Automation and Electronic Information Xiangtan University Hunan Province Cooperative Innovation Center for Wind Power Equipment and Energy Conversion Xiangtan China Xiangtan University College of Automation and Electronic Information Xiangtan China Universidad Tecnológica de Pereira Electrical Engineering Program Pereira Colombia

ISBN: (纸本)9781728158266

Compared to the traditional low-power resonant converters, the current-feed single-switch (CFSS) resonant converter has many advantages, such as lower switching loss, higher power efficiency and mitigation of oscillations. In order to improve the power density of the CFSS resonant converter, a passive integrated unit with flexible multi-layer foil (FMLF) integrated technique is proposed in this paper. In addition, the structure, flux analysis and parameter design of the integrated unit are also introduced. Finally, a simulation model based on Maxwell/Ansoft and the prototype of 80w-260khz resonant converter are established to verify the feasibility of the idea. © 2020 IEEE.

关键词： power converters

来源：评论

学校读者我要写书评

暂无评论

Efficiency enhancement in photoelectrochemical water splitting: Defect passivation and boosted charge transfer kinetics of zinc oxide nanostructures via chalcopyrite/chalcogenide mix sensitization

引用

Physical Review Materials 2021年第12期5卷 125403-125403页

作者： Cigdem Tuc Altaf Nazrin Abdullayeva Ozlem Coskun Alihan Kumtepe İpek Deniz Yildirim Emre Erdem Maochang Liu Ali Bozbey Ertan Agar Mehmet Sankir Nurdan Demirci Sankir Micro and Nanotechnology Graduate Program TOBB University of Economics and Technology Sogutozu Caddesi No 43 Sogutozu 06560 Ankara Turkey Faculty of Engineering and Natural Sciences Sabanci University Orhanli Tuzla 34956 Istanbul Turkey International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an Shaanxi 710049 People's Republic of China Department of Electrical and Electronics Engineering TOBB University of Economics and Technology Sogutozu Caddesi No 43 Sogutozu 06560 Ankara Turkey Department of Mechanical Engineering Energy Engineering Graduate Program University of Massachusetts Lowell Lowell Massachusetts 01854 USA Department of Materials Science and Nanotechnology Engineering TOBB University of Economics and Technology Sogutozu Caddesi No 43 Sogutozu 06560 Ankara Turkey

ZnO thin films in nanorod (NR) and nanoflower (NF) morphologies were used as photoelectrode scaffolds for efficient visible-light-driven photoelectrochemical (PEC) water splitting process, where their decoration with copper indium gallium sulfide (CIGS) and indium sulfide (In2S3) layers resulted in significant PEC performance enhancement. ZnO NF/CIGS/In2S3 photoelectrodes exhibited a remarkably high PEC efficiency (∼6.0% applied bias photon-to-current efficiency, 83% incident photon-to-current efficiency) due to the negligible dark current, while ZnO NR/CIGS/In2S3 generated a photocurrent density of ***–2 at 0.4 V (vs Ag/AgCl), being one of the highest performances reported in the literature for copper-based chalcopyrite photoelectrodes so far. The interfacial photoelectrode-electrolyte charge transport dynamics, investigated via intensity-modulated photocurrent spectroscopy, exhibited a sevenfold increase in charge transfer efficiencies with a significant drop in surface recombination kinetics for ZnO NF after CIGS/In2S3 decoration. The obtained results show consistency with numerically modeled electric field distribution profiles and electron paramagnetic resonance results of ZnO NF, rationalizing the enhanced charge transfer rates for decorated samples and confirming the defect passivating nature of CIGS/In2S3.

关键词： Electrochemical properties Photoconductivity

来源：评论

学校读者我要写书评

暂无评论

Predicting 1-year mortality of acute kidney injury: A risk model using electronic health records

Predicting 1-year mortality of acute kidney injury: A risk m...

引用

International Forum on Medical Imaging in Asia 2021, IFMIA 2021

作者： Huang, Chao-Jung Wu, Brian Li, Xiaodong Han, Yongxia Zhang, Yaqi Hao, Shiying Ling, Xuefeng B. National Taiwan University-Stanford Joint Program Office of AI in Biotechnology Ministry of Science and Technology Joint Research Center for Artificial Intelligence Technology and All Vista Healthcare Taipei Taiwan Clinical Research University of California San Diego San DiegoCA92093 United States School of Computer Science and Technology Hangzhou Dianzi University Hangzhou China School of Electrical Power Engineering South China University of Technology Guangzhou China Department of Surgery Stanford University StanfordCA94305 United States Department of Cardiothoracic Surgery Stanford University StanfordCA94305 United States Clinical and Translational Research Program Betty Irene Moore Children's Heart Center Lucile Packard Children's Hospital Palo AltoCA94305 United States

ISBN: (数字)9781510644212

ISBN: (纸本)9781510644205

Acute kidney injury (AKI) is associated with increased morbidity and mortality in intensive care units (ICU). The sudden episode of kidney failure may lead to end-stage renal disease (ESRD) or deaths, and has been related to significantly increasing costs of ICU admissions and treatments. Early prediction of AKI inpatient mortality will help decision-making, and benefit resource allocation in ICU. Therefore, it is crucial to develop an early warning system for AKI prediction. We aimed to create a more comprehensive predictive model for 1-year AKI mortality. A cohort of 2,247 patients with AKI was assembled, of which the in-hospital mortality was 36.67%. Longitudinal data of each patient were collected from the Medical Information Mart for Intensive Care III (MIMIC-III) dataset. An interpretable XGBoost risk model was developed and validated by 10-fold cross validation. Model predictors included 11 routinely collected AKI-related laboratory measurements, 8 complications of AKI, and demographic data. An artificial neural network (ANN) model was also developed in parallel for comparison. The XGBoost model demonstrated an area under the receiver-operating characteristic curve (AUC) of 0.83, which was superior to ANN (AUC = 0.79). Our model was able to predict mortality of AKI in ICU with high accuracy. Our model can predict 1-year AKI mortality. Furthermore, it had great potential for identifying at-risk patients in ICU. These findings indicated that our approach might offer opportunities for better resource utilization and better administration of AKI. © 2021 SPIE.

关键词： Neural networks

来源：评论

学校读者我要写书评

暂无评论

A Review: Gravitational Water Vortex power Plant

A Review: Gravitational Water Vortex Power Plant

引用

2020 International Conference on Sustainable Energy engineering and Application, ICSEEA 2020

作者： Huwae, Reza Sudibyo, Henny Subekti, Ridwan Arief Susatyo, Anjar Khaerudini, Deni Shidqi Mercu Buana University Program of Study Magister in Mechanical Engineering Jakarta Indonesia Research Centre for Electrical Power and Mechatronics Bandung Indonesia Indonesian Institute of Sciences Research Centre for Electrical Power and Mechatronics Bandung Indonesia Research Center for Physics Serpong Indonesia Department of Physics FMIPA Universitas Indonesia Gedung F Fakultas MIPA Kampus UI Depok Depok Jawa Barat Indonesia

ISBN: (纸本)9781728188492

Significant population and economic growth, caused increasing of energy demand. Depletion of fossil fuel moreover coupled by climate change issue that caused by increasing carbon emission, become necessity to continuously encourage achieving renewable energy mix in energy primer. Large potentials of hydro renewable energy source and small utilization of it, micro-hydro and pico-hydro power plant are suitable to develop especially in country side. The research gap in the current turbine application chart is a challenge for Gravitational Water Vortex power Plant (GWVPP) strong existence in pico-hydro power, besides conventional turbine design has been developed into it. However, development in vortex flow and basin geometry design has a robust design for the past 10 years of research. Researches have been conducted in few countries that proofed GWVPP has less capital investment and low operational and maintenance cost, however the parameter of the GWVPP still need further development since the power output efficiency still low. Since basin opening and outlet diameter are the main parameters to define basin geometry, inlet channel need to do further research. The research will improve the recent gaps;therefore, vortex turbine could be developed accordingly that would result immediate improvements for renewable energy growth in Indonesia through GWVPP. © 2020 IEEE.

关键词： Investments

来源：评论

学校读者我要写书评

暂无评论

Microfluidic nanodevices for drug sensing and screening applications

引用

Biosensors and Bioelectronics 2023年 219卷 114783页

作者： Pal, Arnab Kaswan, Kuldeep Barman, Snigdha Roy Lin, Yu-Zih Chung, Jun-Hsuan Sharma, Manish Kumar Liu, Kuei-Lin Chen, Bo-Huan Wu, Chih-Cheng Lee, Sangmin Choi, Dongwhi Lin, Zong-Hong Institute of Biomedical Engineering National Tsing Hua University Hsinchu30013 Taiwan International Intercollegiate PhD Program National Tsing Hua University Hsinchu30013 Taiwan Department of Power Mechanical Engineering National Tsing Hua University Hsinchu30013 Taiwan Department of Materials Science and Engineering National Tsing Hua University Hsinchu30013 Taiwan Department of Chemistry National Tsing Hua University Hsinchu30013 Taiwan Frontier Research Center on Fundamental and Applied Sciences of Matters National Tsing Hua University Hsinchu30013 Taiwan Department of Gastroenterology and Hepatology Chang Gung Memorial Hospital Linkou Medical Center Taoyuan333 Taiwan Center of Quality Management National Taiwan University Hospital Hsinchu Branch Hsinchu30059 Taiwan College of Medicine National Taiwan University Taipei10051 Taiwan Institute of Cellular and System Medicine National Health Research Institute Zhunan 35053 Taiwan School of Mechanical Engineering Chung-Ang University Seoul06974 Korea Republic of Kyung Hee University Gyeonggi 17104 Korea Republic of

The outbreak of pandemics (e.g., severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2 in 2019), influenza A viruses (H1N1 in 2009), etc.), and worldwide spike in the aging population have created unprecedented urgency for developing new drugs to improve disease treatment. As a result, extensive efforts have been made to design novel techniques for efficient drug monitoring and screening, which form the backbone of drug development. Compared to traditional techniques, microfluidics-based platforms have emerged as promising alternatives for high-throughput drug screening due to their inherent miniaturization characteristics, low sample consumption, integration, and compatibility with diverse analytical strategies. Moreover, the microfluidic-based models utilizing human cells to produce in-vitro biomimetics of the human body pave new ways to predict more accurate drug effects in humans. This review provides a comprehensive summary of different microfluidics-based drug sensing and screening strategies and briefly discusses their advantages. Most importantly, an in-depth outlook of the commonly used detection techniques integrated with microfluidic chips for highly sensitive drug screening is provided. Then, the influence of critical parameters such as sensing materials and microfluidic platform geometries on screening performance is summarized. This review also outlines the recent applications of microfluidic approaches for screening therapeutic and illicit drugs. Moreover, the current challenges and the future perspective of this research field is elaborately highlighted, which we believe will contribute immensely towards significant achievements in all aspects of drug development. © 2022 Elsevier B.V.

关键词： Microfluidics

来源：评论

学校读者我要写书评

暂无评论

Chemically Binding Scaffolded Anodes with 3D Graphene Architectures Realizing Fast and Stable Lithium Storage

引用

Research 2019年第1期2019卷 662-670页

作者： Ping Wu Zhiwei Fang Anping Zhang Xiao Zhang Yawen Tang Yiming Zhou Guihua Yu Materials Science and Engineering Program and Department of Mechanical Engineering Te University of Texas at AustinAustinTexas 78712USA Jiangsu Key Laboratory of New Power Batteries Jiangsu Collaborative Innovation Center of Biomedical Functional MaterialsSchool of Chemistry and Materials ScienceNanjing Normal UniversityNanjing 210023China

Tree-dimensional(3D)graphene has emerged as an ideal platform to hybridize with electrochemically active materials for improved ***,for lithium storage,current anodic guests ofen exist in the form of nanoparticles,physically attached to graphene hosts,and therefore tend to detach from graphene matrices and aggregate into large congeries,causing considerable capacity fading upon repeated ***,we develop a facile double-network hydrogel-enabled methodology for chemically binding anodic scafolds with 3D graphene *** tin-based alloy anodes as an example,the doublenetwork hydrogel,containing interpenetrated cyano-bridged coordination polymer hydrogel and graphene oxide hydrogel,is directly converted to a physical-intertwined and chemical-bonded Sn−Ni alloy scafold and graphene architecture(Sn−Ni/G)dual *** unique dual framework structure,with remarkable structural stability and charge-transport capability,enables the Sn−Ni/G anode to exhibit long-term cyclic life(701 mA h g^(−1) afer 200 cycles at 0.1 A g^(−1))and high rate performance(497 and 390 mA h g^(−1) at 1 and 2 A g^(−1),respectively).Tis work provides a new perspective towards chemically binding scafolded low-cost electrode and electrocatalyst materials with 3D graphene architectures for boosting energy storage and conversion.

关键词： anodic attached boosting

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：