检索结果-内蒙古大学图书馆

Characteristics of controlled Bridge Circuit and Its Application in Magnetic Field Induction Measurement

Tsinghua Science and Technology 2024年第4期29卷 1105-1117页

作者： Yanchu Li Qingqing Ding Mingchen Yan Jiyao Wang Jun Xu Xinzhou Dong Department of Electrical Engineering Tsinghua UniversityBeijing 100084China State Key Laboratory of Control and Simulation of Power System and Generation Equipments Tsinghua UniversityBeijing 100084China School of Electrical and Electronic Engineering North China Electric Power UniversityBeijing 100096China

The article designs a new type of bridge circuit with a controlled source—when the resistance on the bridge arm of the controlled source bridge circuit meets the bridge balance condition, and the bridge branch contains only one Current-controlled Current Source (CCCS), a Voltage-controlled Current Source (VCCS), a Current-controlled Voltage Source (CCVS), or a Voltage-controlled Voltage Source (VCVS), the circuit is called a controlled bridge circuit, which has the characteristics of bridge balance. Due to the relationship between the controlled source and the bridge arm, the sensitivity of the components on the bridge is higher mathematically and logically. When applied to measurement, engineering, automatic control, and other fields, the controlled bridge circuit has higher control ac-curacy. Mathematical derivation and simulation results prove the correctness of the bridge balance conclusion and the special properties of this bridge when applied to the measurement field.

关键词： bridge bircuit bridge circuit applications bridge balanced condition controlled bridge circuit magnetic field induction measurement

来源：评论

学校读者我要写书评

暂无评论

Inhibiting liquid permeation into silicone rubber by superhydrophobic coating for prolonged service life

引用

High Voltage 2023年第5期8卷 986-996页

作者： Shuming Liu Ying Zhou Zhou Zuo Shuqi Liu Qian Wang Zhong Chen Xidong Liang State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijingChina School of Material Science and Engineering Nanyang Technological UniversitySingaporeSingapore

Liquid permeation into silicone rubber(SR)may lead to the degradation or complete failure of the composite *** to inhibit liquid permeation,two kinds of superhydrophobic coatings are applied to the SR *** liquid permeation properties of SR with different types of liquids are investigated,and the Langmuir diffusion model is applied to analyse the experimental *** results show that the composite superhydrophobic coating can effectively inhibit liquid permeation by reducing the contact area between the surface and liquid,and the stable structure of the composite coating can maintain the performance after the liquid permeation and ***,the nano‐particle coating without the polymer binder experiences severe performance degradation during the immersion test,and it cannot restrain the liquid permeation anymore after it loses the *** a validation of the effective protection,the insulation resistivity change was *** resistivity decreases sharply for the pristine SR after water permeation;however,the decrease is much smaller for the coated *** current study not only provides new insight into the liquid permeation properties of SR with different surface wettability but also suggests an effective measure to prevent liquid permeation into SR.

关键词： coating permeation liquid

来源：评论

学校读者我要写书评

暂无评论

Convolution Neural Network-based Load Model Parameter Selection Considering Short-term Voltage Stability

引用

CSEE Journal of power and Energy systems 2024年第3期10卷 1064-1074页

作者： Ying Wang Chao Lu Xinran Zhang School of Technology Beijing Forestry UniversityBeijing 100083China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua UniversityBeijing 100084China School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100083China IEEE

The recently proposed ambient signal-based load modeling approach offers an important and effective idea to study the time-varying and distributed characteristics of power ***,it also brings new *** the load model parameters of power loads can be obtained in real-time for each load bus,the numerous identified parameters make parameter application *** order to obtain the parameters suitable for off-line applications,load model parameter selection(LMPS)is first introduced in this ***,the convolution neural network(CNN)is adopted to achieve the selection purpose from the perspective of short-term voltage *** begin with,the field phasor measurement unit(PMU)data from China Southern power Grid are obtained for load model parameter identification,and the identification results of different substations during different times indicate the necessity of ***,the simulation case of Guangdong power Grid shows the process of LMPS,and the results from the CNNbased LMPS confirm its effectiveness.

关键词： Ambient signal CNN field PMU data load model parameter selection short-term voltage stability

来源：评论

学校读者我要写书评

暂无评论

Multi-physics Based Temperature Distribution Simulation of HVAC Submarine Cable at Various Velocity 4th

Multi-physics Based Temperature Distribution Simulation of H...

引用

4th International Symposium on Insulation and Discharge Computation for power Equipment, IDCOMPU 2023

作者： Zhang, Zhen Zhou, Yuanxiang Chen, Jianning Li, Yuhang Dai, Yasong The Wind Solar Storage Division of State Key Laboratory of Power System and Generation Equipment School of Electrical Engineering Xinjiang University Urumqi830047 China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China

ISBN: (纸本)9789819974009

The temperature distribution of submarine cables is an important parameter reflecting its operation status. The acquisition of temperature distribution trends for submarine cables under varying seawater flow rates holds important engineering significance. In this paper, the geometric model is constructed using a 220 kV three-core AC armored submarine cable laid on the seabed. The simulation model of AC three-core submarine cable temperature field is proposed based on the coupling of electro-thermal-flow multi-physics field. Finally, the study investigates how the steady-state temperature distribution of submarine cables varies with different seawater flow velocities. The results show that the temperature is radially distributed at the seawater velocity of 0m/s, and the temperatures of different phase conductors are different by the relative position, which are 89.9 °C, 89.6 °C and 89.08 °C, respectively. As the seawater flow velocity increases, the heat taken away from the cable surface by convection increases. When the seawater flow velocity is 1 × 10−6m/s, 0.0001 m/s, 0.001 m/s, 0.001 m/s and 0.001 m/s, the maximum conductor temperatures are 69.5 °C, 44.6 °C, 38.5 °C, 33.6 °C and 32.7 °C, and the ampacity is 871.7 A, 1216 A, 1382.8 A, 1590.7 A and 1640.9 A, respectively. The simulation results can provide reference for submarine cable transmission engineering design. © 2024, Beijing Paike Culture Commu. Co., Ltd.

关键词： Temperature distribution

来源：评论

学校读者我要写书评

暂无评论

Inertia Support Strategy for DC Collecting system of Wind Turbine Generator

Inertia Support Strategy for DC Collecting System of Wind Tu...

引用

2024 CPSS and IEEE International Symposium on Energy Storage and Conversion, CPSS and ISESC 2024

作者： Liu, Zenyang Sun, Kai Wang, Huan Lu, Junlong Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering Beijing China Institute of Electrical Engineering Chinese Academy of Sciences Renewable Energy Power Generation System Research Department Beijing China

ISBN: (纸本)9798350380514

In wind turbine generators system, lacking of inertia is a common problem. In AC collecting system, some researches have been done to solve this problem. However, in DC collecting system, few researches were done. This paper analyzes the analogies between AC and DC collecting system and the virtual capacitor control corresponding to the virtual synchronous generator control. Small signal models of different precision are proposed considering the LLC resonant converter used for stepping-up. The virtual capacitance provided by the control is calculated using the small signal model and this verifies the effectiveness of the control quantitively and demonstrates that the small signal models are useful. © 2024 IEEE.

关键词： Wind Turbine Generators

来源：评论

学校读者我要写书评

暂无评论

Operational Reliability Modeling and Assessment of Battery Energy Storage Based on Lithium-ion Battery Lifetime Degradation

引用

Journal of Modern power systems and Clean Energy 2022年第6期10卷 1738-1749页

作者： Lin Cheng Yuxiang Wan Yanglin Zhou David Wenzhong Gao State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijingChina Department of Electrical and Computer Engineering University of DenverDenverUSA IEEE

Battery energy storage(BES)systems can effectively meet the diversified needs of power system dispatching and assist in renewable energy *** reliability of energy storage is essential to ensure the operational safety of the power ***,BES systems are composed of battery *** suggests that BES performance depends not only on the configuration but also on the operating state over different lifetime *** lack of safety and reliability is the main bottleneck preventing widespread applications of BES ***,a reliability assessment algorithm and a weak-link analytical method for BES systems are proposed while considering battery lifetime ***,a novel lithium-ion battery model is proposed to identify the degradation rate of solid electrolyte interphase film formation and capacity *** impacts of different operating conditions are considered in stress factor ***,a reliability assessment algorithm for a BES system is introduced based on a universal generating *** innovative weak-link analytical method based on the reliability importance index is proposed that combines the evaluation results of state-oriented and state-change-oriented indexes through an entropy weight *** model,algorithm,indexes,and the usefulness are demonstrated in case studies based on aging test data and actual bus operating *** results demonstrate the effects of the battery status and working conditions on BES ***-link analysis is also used to assist BES systems in avoiding short-board batteries to achieve long lifetimes and efficient operation.

关键词： Battery energy storage lifetime degradation operational reliability capacity plummeting weak-link analysis

来源：评论

学校读者我要写书评

暂无评论

Cloud-edge-based We-Market:Autonomous Bidding and Peer-to-peer Energy Sharing Among Prosumers

引用

Journal of Modern power systems and Clean Energy 2023年第4期11卷 1282-1293页

作者： Fangyuan Si Yinghua Han Qinqin Xu Jinkuan Wang Qiang Zhao College of Information Science and Engineering Northeastern UniversityShenyangChinaand F.Si is also with the State Key Laboratory of Power System and Generation EquipmentDepartment of Electrical EngineeringTsinghua UniversityBeijingChina School of Computer and Communication Engineering Northeastern University at QinhuangdaoQinhuangdaoChina School of Control Engineering Northeastern University at QinhuangdaoQinhuangdaoChina

With the extensive penetration of distributed renewable energy and self-interested prosumers,the emerging power market tends to enable user autonomy by bottom-up control and distributed *** paper is devoted to solving the specific problems of distributed energy management and autonomous bidding and peer-to-peer(P2P)energy sharing among prosumers.A novel cloud-edge-based We-Market is presented,where the prosumers,as edge nodes with independent control,balance the electricity cost and thermal comfort by formulating a dynamic household energy management system(HEMS).Meanwhile,the autonomous bidding is initiated by prosumers via the modified Stone-Geary utility *** the cloud center,a distributed convergence bidding(CB)algorithm based on consistency criterion is developed,which promotes faster and fairer bidding through the interactive iteration with the edge ***,the proposed scheme is built on top of the commercial cloud platform with sufficiently secure and scalable computing *** results show the effectiveness and practicability of the proposed We-Market,which achieves 15%cost reduction with shorter running *** analysis indicates better scalability,which is more suitable for largerscale We-Market implementation.

关键词： We-Market bidding energy sharing prosumer peer-to-peer cloud-edge

来源：评论

学校读者我要写书评

暂无评论

Simulation of Arc Erosion on the Main Contact of On-Load Tap Changer 4th

Simulation of Arc Erosion on the Main Contact of On-Load Tap...

引用

4th International Symposium on Insulation and Discharge Computation for power Equipment, IDCOMPU 2023

作者： Zhou, Yuanxiang Dai, Yasong Chen, Jianning Li, Yuhang Hou, Xuzhao Zhang, Zhen State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China The Wind Solar Storage Division of State Key Laboratory of Power System and Generation Equipment School of Electrical Engineering Xinjiang University Urumqi830047 China

ISBN: (纸本)9789819974047

Long-term operation and switching of transformer on-load tap-changers can cause degradation and deterioration of the main contact material, even leading to contact arcing damage in severe cases. However, the arcing mechanism of the main contact during the switching has not been clarified yet. A magneto-hydrodynamic simulation method of main contact arcing has been proposed. The geometry of the main contact in transformer oil is simplified, and the simulation model of the arc temperature field of the main contact in transformer oil coupled with electric, magnetic, thermal and fluid fields is proposed. The dynamic evolution of the arc temperature has been investigated at peak currents of 2100 A, 1500 A, 600 A and 300 A, respectively. The results show that with the increase of the spacing between contacts, the temperature at arc core rises rapidly and then decreases slowly, and the temperature can reach 50177 K at 2100A. Due to the electron bombardment at the anode surface, the temperature at anode surface is higher than that at cathode surface under different chopped currents. The highest temperatures at anode and cathode surface can reach 4142.5 K and 4081.7 K respectively. © Beijing Paike Culture Commu. Co., Ltd 2024.

关键词： Deterioration

来源：评论

学校读者我要写书评

暂无评论

Identifiability Analysis of Load Model Parameters by Estimating Confidential Intervals

引用

CSEE Journal of power and Energy systems 2023年第5期9卷 1666-1675页

作者： Xinran Zhang Chao Lu Ying Wang Qiantu Ruan Hongbo Ye Weihong Wang the School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100191China. the State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua UniversityBeijing 100084China School of Technology Beijing Forestry UniversityBeijing 100083China the State Grid Shanghai Electric Power Company Shanghai 200122China

The identification of load model parameters from practical measurement data has become an essential method to build load models for power system simulation,analysis and *** practical situations,the accuracy of the load model parameters identification results is impacted by data quality and measurement accuracy,which leads to the problem of *** this paper,an identifiability analysis methodology of load model parameters,by estimating the confidential intervals(CIs)of the parameters,is *** load model structure and the combined optimization and regression method to identify the parameters are first ***,the definition and analysis method of identifiability are *** CIs of the parameters are estimated through the profile likelihood method,based on which a practical identifiability index(PII)is defined to quantitatively evaluate ***,the effectiveness of the proposed analysis approach is validated by the case study results in a practical provincial power *** results show that the impact of various disturbance magnitudes,measurement errors and data length can all be reflected by the proposed ***,the proposed PII can provide guidance in data length selection in practical load model identification situations.

关键词： Confidential interval Load modeling parameter estimation practical identifiability

来源：评论

学校读者我要写书评

暂无评论

The Electrical-Thermal Coupling Simulation of Grafted Polypropylene Used in High-Voltage Direct Current Cables 4th

The Electrical-Thermal Coupling Simulation of Grafted Polypr...

引用

4th International Symposium on Insulation and Discharge Computation for power Equipment, IDCOMPU 2023

作者： Fan, Yazhou Zhang, Wenjia Peng, Xiangyang Huang, Shangshi Li, Yinge Hu, Shixun Li, Qi He, Jinliang Guangdong Power Grid Company Limited Electricity Research Institute Guangzhou510062 China Department of Electrical Engineering The State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Beijing100084 China

ISBN: (纸本)9789819974122

Under direct current (DC) operation conditions, local electric field in insulation layer will be distorted, leading to insulation failure. Since the conductivity of insulating materials generally corresponds positively with temperature, a temperature gradient will form inside the insulating material during cable operation, making the conductivity distribution uneven and causing the "electric field reversal" phenomenon in the cable insulation layer. The distribution of the electric field and temperature field of the polypropylene grafted as the cable insulation under the electric heating-coupling field is yet to be studied. Studies have proved that by grafting modification the insulating properties of materials can be improved. This paper studied the and conductivity characteristics of grafted polypropylene materials, and selected one type for more experiments to obtain the material's conductivity-temperature-electric field strength characteristic equation through data fitting. A model of a 100 kV DC cable was established in COMSOL, and simulation of the cable section’s electric heating-coupling field was performed, revealing the temperature and electric field distribution inside the insulation layer when the cable is rated, overloaded, or short-circuited. This paper can provide some reference for operational analysis of polypropylene-insulated HVDC cables. © Beijing Paike Culture Commu. Co., Ltd 2024.

关键词： Polypropylenes

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：