检索结果-内蒙古大学图书馆

Two-stage Optimal Scheduling of Community Integrated Energy system Considering Operation Sequences of Hydrogen Energy Storage systems

引用

Journal of Modern power systems and Clean Energy 2025年第1期13卷 276-288页

作者： Wei Kong Kai Sun Jinghong Zhao School of Electrical Engineering Naval University of EngineeringWuhanChina Department of Electrical Engineering State Key Laboratory of Power System Operation and ControlTsinghua UniversityBeijingChina

The hydrogen energy storage system(HESS)integrated with renewable energy power generation exhibits low reliability and flexibility under source-load *** address the above issues,a two-stage optimal scheduling model considering the operation sequences of HESSs is proposed for commercial community integrated energy systems(CIESs)with power to hydrogen and heat(P2HH)*** aims to optimize the energy flow of HESS and improve the flexibility of hydrogen production and the reliability of energy supply for ***,the refined operation model of HESS is established,and its operation model is linearized according to the operation domain of HESS,which simplifies the difficulty in solving the optimization problem under the premise of maintaining high approximate ***,considering the flexible start-stop of alkaline electrolyzer(AEL)and the avoidance of multiple energy conversions,the operation sequences of HESS are ***,a two-stage optimal scheduling model combining day-ahead economic optimization and intra-day rolling optimization is established,and the model is simulated and verified using the source-load prediction data of typical days in each *** simulation results show that the two-stage optimal scheduling reduces the total load offset by about 14%while maintaining similar operating cost to the day-ahead economic optimal ***,by formulating the operation sequences of HESS,the operating cost of CIES is reduced by up to about 4.4%.

关键词： Community integrated energy system(CIES) hydrogen storage operation sequence two-stage optimal scheduling

来源：评论

学校读者我要写书评

暂无评论

power system Reliability Evaluation Based on Sequential Monte Carlo Simulation Considering Multiple Failure Modes of Components

引用

Journal of Modern power systems and Clean Energy 2025年第1期13卷 202-214页

作者： Wei Huang Bo Hu Changzheng Shao Wei Li Xiaozhe Wang Kaigui Xie C.Y.Chung State Key Laboratory of Power Transmission Equipment Technology School of Electrical EngineeringChongqing UniversityChongqingChina China Southern Power Grid GuangzhouChina Department of Electrical and Computer Engineering McGill UniversityMontrealCanada Department of Electrical and Electronic Engineering Hong Kong Polytechnic UniversityHong KongChina

The component aging has become a significant concern worldwide,and the frequent failures pose a serious threat to the reliability of modern power *** light of this issue,this paper presents a power system reliability evaluation method based on sequential Monte Carlo simulation(SMCS)to quantify system reliability considering multiple failure modes of ***,a three-state component reliability model is established to explicitly describe the state transition process of the component subject to both aging failure and random failure *** this model,the impact of each failure mode is decoupled and characterized as the combination of two state duration variables,which are separately modeled using specific probability ***,SMCS is used to integrate the three-state component reliability model for state transition sequence generation and system reliability ***,various reliability metrics,including the probability of load curtailment(PLC),expected frequency of load curtailment(EFLC),and expected energy not supplied(EENS),can be *** ensure the applicability of the proposed method,Hash table grouping and the maximum feasible load level judgment techniques are jointly adopted to enhance its computational *** studies are conducted on different aging scenarios to illustrate and validate the effectiveness and practicality of the proposed method.

关键词： power system reliability evaluation aging failure sequential Monte Carlo simulation

来源：评论

学校读者我要写书评

暂无评论

Stable Stochastic MPC for Uncertain Wind Energy Conversion system Over Whole Operating Regions

引用

IEEE Transactions on Energy Conversion 2025年第1期40卷 515-528页

作者： Liu, Xiangjie Guo, Shifan Ma, Lele Kong, Xiaobing Lee, Kwang Y. North China Electric Power University State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources Beijing102206 China Baylor University Department of Electrical and Computer Engineering WacoTX76798-7356 United States

The stochastic uncertainty of wind speed presents a great challenge for achieving reliable power control in wind energy conversion system (WECS). Due to the excellence in handling the uncertainties based on probabilistic descriptions, stochastic model predictive control (SMPC) has been regarded as a promising strategy for WECS. However, owing to fluctuation characteristic of wind speed, operating points commonly change in WECS. Thus, an important limitation of applying SMPC to WECS stems from the fact that feasibility and stability of the traditional SMPC can only be ensured at one single predesigned operating point. Regarding this issue, a stable SMPC strategy for uncertain WECS is proposed in this paper to ensure the feasibility and stability of WECS under changing operating points over the whole operating regions. A Luenberger observer is employed to estimate model-plant mismatch introduced by linearization process, while a tube-based control framework is deployed to cope with stochastic wind speed disturbance. The feasibility of SMPC is ensured by incorporating artificial steady targets as optimization variables, while the stability of WECS is guaranteed by modifying the cost function and extending the terminal constraint. The effectiveness of the proposed strategy is validated through simulations and experiments under different scenarios. © 1986-2012 IEEE.

关键词： Stochastic systems

来源：评论

学校读者我要写书评

暂无评论

Bolt-YOLO: Research on an Algorithm Framework for Detecting Bolt Defects in Transmission Lines

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1718-1729页

作者： He, Min Qin, Liang Deng, Xinlan Liu, Qing Liu, Kaipei Wuhan University Department of Electrical Engineering and automation Hubei Key Laboratory of Power Equipment & System Security for Integrated Energy Wuhan430072 China

In transmission lines, bolt fittings are critical components that connect towers and insulators. These fittings are prone to defects, such as loosening or missing bolts, due to natural environmental factors, posing significant risks to the system's operation. Drone inspection images are increasingly used for the intelligent detection of bolt fittings, yet the small size of bolt components and the uneven distribution of sample quantities limit detection accuracy. To address these challenges, this paper proposes a multi-type bolt fitting defect detection algorithm aimed at improving detection accuracy and robustness. To tackle the issue of small target detection, we design a novel down-sampling method that incorporates both global and local feature perception, reducing the loss of small target information. This method is integrated into the Res-PANet, a multi-scale feature fusion structure based on residual skip connections, which compensates for the loss of small target details in high-level semantic features. Additionally, to address the sample imbalance problem, we introduce adaptive class weighting and a Minimum Peripheral Point Distance (MPPD) bounding box similarity constraint to better locate imbalanced sample regions from the loss function perspective. Experimental results, using a detection dataset containing four types of targets—normal bolts, missing pins, loose pins, and missing nuts—demonstrate the effectiveness of the proposed algorithm. Compared to the original YOLOv8 model, the improved model shows a 1.9% accuracy improvement for detecting missing pins, a 3.2% improvement for loose pins, and a 4.2% improvement for missing nuts. The overall mean accuracy increased from 69.5% to 72.1%. These results provide a solid technical foundation for detecting bolt fitting defects in transmission lines, offering significant practical value for future inspection tasks. © 1986-2012 IEEE.

关键词： Bolts

来源：评论

学校读者我要写书评

暂无评论

Orbit-Orbit Interaction in Spatiotemporal Optical Vortex

引用

engineering 2025年第2期45卷 44-51页

作者： Jian Chen Jie Zhao Xi Shen Dewei Mo Cheng-Wei Qiu Qiwen Zhan School of Optical-Electrical and Computer Engineering University of Shanghai for Science and TechnologyShanghai 200093China Shanghai Key Laboratory of Modern Optical System University of Shanghai for Science and TechnologyShanghai 200093China Department of Electrical and Computer Engineering National University of SingaporeSingapore 117583Singapore

While spin-orbit interaction has been extensively studied,few investigations have reported on the interaction between orbital angular momenta(OAMs).In this work,we study a new type of orbit-orbit coupling between the longitudinal OAM and the transverse OAM carried by a three-dimensional(3D)spatiotemporal optical vortex(STOV)in the process of tight *** 3D STOV possesses orthogonal OAMs in the x-y,t-x,and y-t planes,and is preconditioned to overcome the spatiotemporal astigmatism effect.x,y,and t are the axes in the spatiotemporal *** corresponding focused wavepacket is calculated by employing the Debye diffraction theory,showing that a phase singularity ring is generated by the interactions among the transverse and longitudinal vortices in the highly confined *** Fourier-transform decomposition of the Debye integral is employed to analyze the mechanism of the orbit-orbit *** is the first revelation of coupling between the longitudinal OAM and the transverse OAM,paving the way for potential applications in optical trapping,laser machining,nonlinear light-matter interactions,and more.

关键词： Spatiotemporal optical vortex Orbital angular momentum Momentum interaction Highly confined wavepacket Diffraction

来源：评论

学校读者我要写书评

暂无评论

Effects of Corona Discharge from the Grounding Tip on Charge Evolution of Wall Bushing

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1682-1693页

作者： Bai, Zheng Zhou, Yuanxiang Zhang, Yunxiao Huang, Xin Xie, Xiongjie Liu, Taiwei Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering Beijing100084 China Electric Power Research Institute State Key Laboratory of Power Grid Environmental Protection Wuhan430204 China

Manufacturers consider that the grounding tip near the wall bushing flange is a potentially important factor in several sheath perforation accidents. Taking a ±100 kV true type SF6 gas-insulated bushing as a typical wall bushing, this paper tests the impact of the nearby grounding tip on the charge accumulation. Based on the experiment results, we propose the three-dimensional nonlinear conduction model to unravel the charge accumulation process and the three-dimensional corona ion migration model to clarify the corona process. It is concluded that the consumption of gas ions leads to the nonlinear charge relaxation process. When the corona of grounding tip incepts, numerous ions are generated, forming an "overcharge" phenomenon. The electric field at the insulator-sheds interface and the SF6-insulator interface increases compared to the normal condition, with non-uniform distribution along the circumferential direction. Material inhomogeneity amplifies electric field distortion and creates insulation weaknesses, making insulation aging more likely and potentially leading to a slowly developing electrical tree breakdown process. The length of the needle tip affects the duration of the corona effect;an excessively long needle tip can cause a sustained corona discharge. This research provides a foundation for bushing accidents analysis and operation reliability improvement. © 1986-2012 IEEE.

关键词： Bushings

来源：评论

学校读者我要写书评

暂无评论

Monitoring Conductor Sags for Dynamic Line Rating Based on Induced Signals in Overhead Ground Wires

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1289-1297页

作者： Cui, Zherui Zhang, Bo Wang, Xiankang Yao, Yao Zhou, Xueming Tsinghua University Department of Electrical Engineering State Key Laboratory of Power System Operation and Control Beijing100084 China State Grid Hubei Electric Power Research Institue Wuhan430000 China

The sag information of conductors is important for dynamic line rating. This paper proposes a novel monitoring method for conductor sags based on the current or voltage in ground wires, which is produced by mutual inductance between conductors and ground wires. The devices of this method are easy to install and maintain, and the monitoring effect is not affected by bad weather such as snow and fog. To obtain sag information, a calculation method of induced signals in the ground wires is firstly proposed. Then the sensitivity of the induced signals in the ground wires to the variation of conductor sags is evaluated. The relationship between the induced signals in the ground wires and the sag information is established through neural network. A scaled test model of overhead transmission line is established to verify the proposed method. The accuracy of deduced results is acceptable. © 1986-2012 IEEE.

关键词： Wire

来源：评论

学校读者我要写书评

暂无评论

Understanding a Type of Forced Oscillation in Grid-Forming and Grid-Following Inverter Connected systems

引用

IEEE Transactions on power Electronics 2025年第8期40卷 11628-11640页

作者： Chen, Song Wang, Yang Tian, Zhen Xiao, Xianyong Xie, Xiaorong Gomis-Bellmunt, Oriol Sichuan University College of Electrical Engineering Sichuan Chengdu610065 China Wuhan University School of Electrical Engineering and Automation Wuhan430070 China Tsinghua University State Key Laboratory of Power System Department of Electrical Engineering Beijing100084 China Technical University of Catalonia Electrical Engineering Department Barcelona08034 Spain

This paper investigates a novel oscillation phenomenon in systems with grid-forming (GFM) and grid-following (GFL) inverters. Unlike previous studies that primarily focus on small-signal stability, this work explores forced oscillations (FOs), where GFL inverters act as excitation sources, inducing oscillations in GFM inverters. Specifically, interharmonics generated by maximum power point tracking (MPPT) control trigger low-frequency oscillation modes in GFM inverters. To analyze this phenomenon, the paper first examines the power characteristics of the interharmonics injected by MPPT and leverages this understanding to develop a P-ω admittance model for GFM and GFL inverter connected systems. This model enables precise prediction of FO amplitudes and provides insights into the influence of factors such as the number of GFM inverters on oscillation behavior. To validate findings, hardware-in-the-loop experiments are performed to verify the observed behavior in a system consisting of photovoltaic farms with GFL control and battery energy storage systems with GFM control. Finally, merits and limitations of this work are explicitly highlighted to provide a balanced perspective. © 1986-2012 IEEE.

关键词： Hardware-in-the-loop simulation

来源：评论

学校读者我要写书评

暂无评论

Abnormal Data Identification and Reconstruction Based on Wind Speed Characteristics

引用

CSEE Journal of power and Energy systems 2025年第2期11卷 612-622页

作者： Mao Yang Tian Peng Wei Zhang Xin Su Chao Han Fulin Fan Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology Ministry of EducationNortheast Electric Power UniversityJilin 132012China Department of Electronic and Electrical Engineering University of StrathclYdeGlasgow G11XWUnited Kingdom

High availability of wind power data is the basis for wind power research, but there are a large number of abnormal data in actual collected data, which seriously affects analysis of wind power law and reduces prediction accuracy. Measured power data of wind farm are analyzed, influence of wind speed fluctuation characteristics on wind power is discussed, and abnormal points are identified for data of different wind types. The Cluster-Based Local Outlier Factor (CLOF) algorithm based on K-means is used to identify outlier abnormal points, and conditional constraints based on physical background are used to identify accumulation abnormal points. Reconstructed data segment is divided according to fluctuation of wind speed. The Bidirectional Gate Recurrent Unit (BiGRU) model with wind speed as input reconstructs fluctuation segment data, and bi-directional weighted random forest model reconstructs stationary segment data. Based on analysis of measured data of a wind farm, results show the method can effectively identify various abnormal data, and complete high-quality reconstruction of data, thereby improving accuracy of wind power prediction.

关键词： Abnormal data bidirectional weighted random forest BiGRU CLOF reconstruction wind power prediction wind speed characteristics

来源：评论

学校读者我要写书评

暂无评论

A Data-Driven Adaptive Control Approach for Enhancing the Dynamic Response of VSGs in Varying Grid Conditions

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1421-1433页

作者： Fahad, Shah She, Buxin Yin, Junjie Li, Fangxing Cui, Hantao Bo, Rui Department of Electrical and Computer Engineering Missouri University of Science and Technology Rolla MO USA Senior Power Systems Engineer ETAP Irvine CA USA Optimization & Control Group Parcific Northwest National Laboratory Richland USA Department of Electrical Engineering and Computer Science University of Tennessee at Knoxville Knoxville TN USA Department of Electrical and Computer Engineering North Carolina State University Raleigh NC USA

Conventionally, a virtual synchronous generator (VSG) is designed for islanded mode (IM) operation to meet specific operational requirements such as the rate of change of frequency (RoCoF). However, the operation of VSG designed for IM may not meet the operational and control criteria in grid connected mode (GCM) when the grid conditions vary. In addition, conventional VSG control technology does not consider the influence of the presynchronization scheme when connected to a weak grid, which degrades the RoCoF in IM. To overcome the aforementioned challenges, the proposed study presents a twin-delayed deep deterministic policy gradient (TD3) algorithm to improve the seamless transition performance of VSG from IM to GCM and vice versa. In the first step, the VSG-based power system model is used as a foundation for problem formulation of the proposed TD3 algorithm. Secondly, a reward function is designed according to the performance requirements, i.e., frequency and RoCoF requirements, of the VSG in order to guide the training of the agent in varying load, power reference, and grid conditions. Finally, the superiority of the proposed algorithm over existing methods is validated in MATLAB/SIMULINK and RTDS based real-time simulation environment. © 1986-2012 IEEE.

关键词： Deep reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：