检索结果-内蒙古大学图书馆

Facile fabrication of NiCo-hydroxysulfide nanosheets array for electrocatalytic urea oxidation

Science China(Technological Sciences) 2025年第1期68卷 218-228页

作者： Jing ZOU Chang LIU Kun XIANG Qiong LI Shihao DAI Jizhou JIANG School of Chemistry and Environmental Engineering School of Environmental Ecology and Biological EngineeringKey Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationNovel Catalytic Materials of Hubei Engineering Research CenterWuhan Institute of TechnologyWuhan 430205China

Urea oxidation reaction(UOR)instead of anodic oxygen evolution reaction(OER)is considered an effective way to reduce energy consumption in electrocatalytic water splitting for hydrogen ***,the slow rate of reaction of UOR,which entails a procedure of transferring six electrons,has hindered its widespread ***,it is crucial to design highly effective electrocatalysts for the implementation of ***,a novel NiCo-hydroxysulfide(NiCo-HOS)electrocatalyst has been reported for UOR,which is obtained by the exchange of sulfur ions in NiCo layered double hydroxide(NiCo-LDH)nanosheets at room *** from the sulfurization process,the composition,electronic structure,and surface properties of electrocatalysts have undergone significant changes and *** sulfurization treatment,the resulting NiCo-HOS showed enhanced chemical resistance to alkaline electrolytes and improved electrical *** a 40 h operation test,it maintained high stability and provided a stable current density of 100 mA cm^(-2)at a relatively low potential of 1.33 V(***)in a solution of 1 mol L^(-1)KOH+0.5 mol L^(-1)***,the anode electrolytic product is analyzed through gas chromatography(GC),and N_2 is detected as the product without the presence of CO,indicating that the urea has undergone complete oxidation.

关键词： urea oxidation reaction NiCo-hydroxysulfide electrocatalyst hydrogen

来源：评论

学校读者我要写书评

暂无评论

Manufacturing processes and Powder Property of Metal Powders for Additive Manufacturing

引用

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 2024年第12期71卷 610-618页

作者： Yamada, Shinnosuke Process Technology Research Sect. Corporate Research & Development Center Daido Steel Co. Ltd. 30 Daido-cho 2-chome Minami-ku Nagoya457-8545 Japan

Recently, Additive Manufacturing (AM) has been attracting attention as the breakthrough manufacturing technology and is being aggressively researched and developed around the world. Metal AM enables the integration of parts with complex 3D internal structures, such as topology optimization and lattice structures, which are difficult to achieve with conventional casting or machining processes and reduces costs by reducing the number of parts and weight. Therefore, it is applied in various industrial fields such as aircraft, medical, automotive, and die & mold. There are various processes for metal AM, of which powder bed fusion (PBF) and direct energy deposition (DED), which use metal powders, are technologically mature and industrially widespread. In metal AM using metal powder, the quality of the AM product is influenced by the interaction of complex factors such as AM build recipe, powder properties and powder feeding process. In case the raw powder with inappropriate powder properties is selected for the AM machine, defects may occur in the AM product and quality, such as mechanical property, may be deteriorated. This review is introduced on typical types of AM processes using metal powder, factors affecting powder properties of AM products, metal powder manufacturing methods, and evaluation methods. ©2024 Japan Society of Powder and Powder Metallurgy.

关键词： Shape optimization

来源：评论

学校读者我要写书评

暂无评论

Strategically designing and fabricating nitrogen and sulfur Co-doped g-C3N4 for accelerating photocatalytic H2 evolution

引用

材料科学技术（英文版） 2025年第5期208卷 111-119页

作者： Haitao Wang Lianglang Yu Jiahe Peng Jing Zou Jizhou Jiang School of Chemistry and Environmental Engineering School of Environmental Ecology and Biological EngineeringKey Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationNovel Catalytic Materials of Hubei Engineering Research CenterWuhan Institute of TechnologyWuhan 430205China State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China

Doping engineering is an effective strategy for graphitic carbon nitride(g-C3N4)to improve its photocat-alytic hydrogen evolution reaction(HER)*** this work,a novel nitrogen and sulfur co-doped g-C3N4(N,S-g-C3N4)is elaborately designed on the basis of theoretical predictions of first-principle density functional theory(DFT).The calculated Gibbs free energy of adsorbed hydrogen(ΔGH·)for N,S-g-C3N4 at the N-doping active sites is extremely close to zero(0.01 eV).Inspired by the theoretical predictions,the N,S-g-C3N4 is successfully fabricated through ammonia-rich pyrolysis synthesis strategy,in which ammonia is in-situ obtained by pyrolyzing *** characterizations indicate that the N,S-g-C3N4 possesses high specific surface area,outstanding light utilization,good hydrophilicity,and efficient carrier transfer ***,the N,S-g-C3N4 displays an extremely high H2 evolution rate of 8269.9 μmol g-1 h-1,achieves an apparent quantum efficiency(AQE)of 3.24％,and also possesses outsatnding *** calculations further demonstrate that N and S dopants can not only introduce doping energy level to reduce the band gap,but also induce charge redistribution to facilitate hydrogen adsorption,thus promoting the photocatalytic HER ***,femtosecond transient absorption(fs-TA)spectroscopy further corroborates the efficient photogenerated carrier transport of N,*** research highlights a promising and reliable strategy to achieve superior photocatalytic activity,and exhibits significant guidance for precise designing high-efficiency photocatalysts.

关键词： Theoretical predictions g-C3N4 N and S co-doping Photocatalytic H2 evolution

来源：评论

学校读者我要写书评

暂无评论

Built-in electric field intensified by photothermoelectric effect drives charge separation over Z-scheme 3D/2D In_(2)Se_(3)/PCN heterojunction for high-efficiency photocatalytic CO_(2) reduction

引用

Journal of Materials Science & technology 2024年第12期179卷 251-261页

作者： Hongjun Dong Lei Tong Pingfan Zhang Daqiang Zhu Jizhou Jiang Chunmei Li Institute of Green Chemistry and Chemical Technology School of Chemistry and Chemical EngineeringJiangsu UniversityZhenjiang 212013China School of Environmental Ecology and Biological Engineering Key Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationNovel Catalytic Materials of Hubei Engineering Research CenterWuhan Institute of TechnologyWuhan 430205China

It is a challenging issue to further drive charge separation through the oriented design of Z-scheme het-erojunction in the exploitation of cost-effective photocatalytic *** this contribution,the unique Z-scheme 3D/2D In_(2)Se_(3)/PCN heterojunction is developed through implanting In_(2)Se_(3) microspheres on PCN nanosheets using an in situ growth technique,which acquires the effective CO generation activity from photocatalytic CO_(2) reduction(CO_(2)R).The CO yield of 4 h in the CO_(2)R reaction over the optimal In_(2)Se_(3)/PCN-15 sample reaches up to 11.40 and 2.41 times higher than that of individual PCN and In_(2)Se_(3),*** greatly enhanced photocatalytic performance is primarily the improvement of photo-generated carrier separation *** be more specific,the formed built-in electric field is signifi-cantly intensified by producing the temperature difference potential between In_(2)Se_(3) and PCN owing to the photothermoelectric effect of In_(2)Se_(3),which actuates the high-efficiency separation of photogenerated charge carriers along the Z-scheme transfer path in the In_(2)Se_(3)/PCN *** effective strat-egy of enhancing the built-in electric field to drive photogenerated charge separation proposed in this work opens up an innovative avenue to design Z-scheme heterojunction applied to high-efficiency pho-tocatalytic reactions,such as hydrogen generation from water splitting,CO_(2)R,and degradation of organic pollutants.

关键词： In_(2)Se_(3)/PCN Z-scheme heterojunction Photocatalytic CO_(2) reduction Enhanced built-in electric field Photothermoelectric effect

来源：评论

学校读者我要写书评

暂无评论

High concentration of Ti^(3+)in C-TiO_(x)nanosheets boosting efficient photodegradation

引用

Science China(Technological Sciences) 2025年第3期68卷 156-166页

作者： Chongbei WU Xuan LI Haibin WANG Jiaxin TANG Shuai WEI Yuanyuan WU Aobing WANG Jizhou JIANG Hebei Key Laboratory of Man-machine Environmental Thermal Control Technology and Equipment Hebei Vocational University of Technology and EngineeringXingtai054000China School of Materials Science and Engineering Key Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationWuhan Institute of TechnologyWuhan430205China

Semiconductor photocatalysis holds significant promise for addressing dye-pollution in ***,the efficiency of photocatalytic water purification is constrained by the weak light absorption capacity and low active site distribution of *** a bottom-up approach,carbon-doped TiO_(x)(C-TiO_(x))nanosheets with high concentrations of Ti^(3+)active sites were fabricated by etching the Al element in Ti_(3)Ai C_(2)with H_(2)O_(2).Experimental evidence demonstrates that the optimal C-TiO_(x)nanosheets exhibit high activity for the photocatalytic degradation of methylene blue,achieving a degradation rate of 100%within 50 *** introduction of carbon into the C-TiO_(x)nanosheets induces a red shift in the absorption edge,boosting the migration of photo-generated charge ***,there is a significant correlation between the concentration of Ti^(3+)active sites and the density of oxygen vacancies in the C-TiO_(x)nanosheets,which synergistically influence the photocatalytic degradation performance of MB dye wastewater.

关键词： bottom-up strategies C-TiO_(x)nanosheets high-concentrations Ti^(3+) photocatalytic degradation

来源：评论

学校读者我要写书评

暂无评论

Fabrication of Dual Damascene structure with Nanoimprint lithography and Dry-etching

Fabrication of Dual Damascene structure with Nanoimprint lit...

引用

Novel Patterning Technologies 2023

作者： Takeuchi, Norikazu Hasegawa, Genna Komukai, Toshiaki Iwasaki, Takahiro Hatano, Masayuki Komori, Motofumi Kono, Takuya Process Technology Research & Development Center Institute of Memory Technology Research & Development Kioxia Corporation 800 Yamanoissiki-cho Yokkaichi-shi Mie-ken512-8500 Japan

ISBN: (纸本)9781510661011

Nanoimprint lithography (NIL) has received attention as alternative lithographic technology, which can fabricate fine patterns of semiconductor devices at low cost. Application of NIL may lead to the reduction of number of process steps and cost of manufacturing of dual-damascene structure, by simultaneous fabrication of holes and trenches. Therefore, in this study, we investigated fabrication of dual-damascene structure using NIL and dry-etching. However, the difficulty in dry-etching process is high as the holes and trenches are etched together using single resist mask. Suppression of defects during the NIL process and the suppression of resist consumption and CD shift during the etching process, is critical. To address these issues, we used a high etching resistance resist, optimized the NIL process to reduce defects, and optimized the template structure and etching process to suppress resist consumption and CD shift. As a result, a dual-damascene structure with L/S = 4X/4X nm was obtained. © 2023 SPIE.

关键词： Nanoimprint lithography

来源：评论

学校读者我要写书评

暂无评论

Piezoelectric-enhanced BiOBr/UiO-66-NH_(2)(Hf)photocatalysts for purification of mixed pollutants

引用

Science China(Technological Sciences) 2025年第5期68卷 87-101页

作者： Tingting YU Chenyu YANG Ran DENG Yonghang ZHANG Jiajun LI Tao YANG Jizhou JIANG School of Environmental and Chemical Engineering Jiangsu Ocean UniversityLianyungang 222005China School of Materials Science and Engineering Key Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationWuhan Institute of TechnologyWuhan 430205China

The simultaneous purification of multiple mixed pollutants holds significant practical value in addressing the growing environmental challenges of *** this work,UiO-66-NH_(2)(Hf)octahedrons were successfully synthesized and grown on BiOBr nanosheets to form a novel heterojunction,BiOBr/UiO-66-NH_(2)(Hf).This BiOBr/UiO-66-NH_(2)(Hf)heterojunction exhibits enhanced photocatalytic degradation and reduction ***,the degradation rate of tetracycline hydrochloride(TC)reached 84.8%,while the reduction efficiency of Cr(VI)approached 100%,demonstrating the material’s effectiveness in simultaneously purifying mixed ***,when ultrasonic force was applied,the degradation rate of TC increased from 57.1%to 84.8%,and the reduction rate of Cr(VI)improved from 73.5%to 100%.These results highlight the material’s excellent piezoelectric properties,which were confirmed through density functional theory calculations and piezoresponse force *** work introduces a novel piezoelectric-coupled photocatalyst that offers a new strategy for the efficient purification of mixed ***,it demonstrates that TC can promote the reduction of Cr(VI)in place of hole quenchers,while simultaneously undergoing *** approach reveals promising prospects for the effective removal of mixed pollutants.

关键词： piezoelectric effect tetracycline hydrochloride photocatalytic degradation Cr(VI)reduction mixed pollutant purification

来源：评论

学校读者我要写书评

暂无评论

Synthesis of Organic-Inorganic Hybrid Aluminum Hypophosphite Microspheres Flame Retardant and Its Flame Retardant research on Thermoplastic Polyurethane

引用

Journal of Wuhan University of technology(Materials Science) 2024年第1期39卷 221-233页

作者：刘生鹏 XU Zhi ZHANG Xinyuan WEI Huan XIONG Yun DING Yigang HUANG Wenbo 许莉莉 Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education Key Laboratory for Green Chemical Process of Ministry of EducationSchool of Chemical Engineering and PharmacyWuhan Institute of TechnologyWuhan 430205China Hubei Three Gorges Laboratory Yichang 443007China School of Technology Materials Science and Engineering Wuhan Institute of TechnologyWuhan 430205China

Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.

关键词： polyphosphazene thermoplastic polyurethane flame retardancy aluminum hypophosphite surface polymerization

来源：评论

学校读者我要写书评

暂无评论

Interfacial B-O bonding modulated S-scheme B-doped N-deficient C_(3)N_(4)/O-doped-C_(3)N_(5) for efficient photocatalytic overall water splitting

引用

Chinese Chemical Letters 2025年第1期36卷 355-361页

作者： Entian Cui Yulian Lu Zhaoxia Li Zhilei Chen Chengyan Ge Jizhou Jiang Key Laboratory for Advanced Technology in Environmental Protection of Jiangsu Province Yancheng Institute of TechnologyYancheng 224051China School of Environmental Ecology and Biological Engineering Key Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationWuhan Institute of TechnologyWuhan 430205China

Photocatalytic overall pure water splitting is a promising method for generating green hydrogen energy under mild ***,this process is often hindered by sluggish electron-hole separation and *** address this,a step-scheme(S-scheme)B-doped N-deficient C_(3)N_(4)/O-doped C_(3)N_(5)(BN-C_(3)N_(4)/O-C_(3)N_(5))heterojunction with interfacial B-O bonds has been *** Pt and Co(OH)_(2) as co-catalysts,BN-C_(3)N_(4)/O-C_(3)N_(5) S-scheme heterojunction demonstrates significantly enhanced photocatalytic activity for overall pure water splitting under visible light,achieving H_(2) and O_(2) evolution rates of 40.12 and 19.62μmol/h,*** characterizations and experiments revealed the performance-enhancing effects of the enhanced built-in electric field and the interfacial B-O ***,the strengthened built-in electric field provides sufficient force for rapid interfacial electron ***,by reducing the transport energy barrier and transfer distance,the interfacial B-O bonds facilitate rapid recombination of electrons and holes with relatively low redox potential via the S-scheme charge-transfer route,leaving the high-potential electrons and holes available for H^(+)reduction and OH^(-)oxidation ***,the photocatalytic efficiency of BN-C_(3)N_(4)/O-C_(3)N_(5) S-scheme heterojunction was significantly improved,making it a promising approach for green hydrogen production through overall pure water splitting.

关键词： Interfacial B-O bonds BN-C_(3)N_(4) O-C_(3)N_(5) S-scheme heterojunction Water splitting

来源：评论

学校读者我要写书评

暂无评论

RSscore:Reaction superiority learned from reaction mapping hypergraph

引用

Chinese Journal of Chemical Engineering 2024年第10期74卷 203-215页

作者： Chenyang Xu Lijuan Guo Kang Zhou Hai Yu Chaoliang Wei Fengqi Fan Lei Zhang State Key Laboratory of Fine Chemicals Frontiers Science Center for Smart Materials Oriented Chemical EngineeringInstitute of Chemical Process Systems EngineeringSchool of Chemical EngineeringDalian University of TechnologyDalian 116024China PetroChina Lanzhou Lubricating Oil Research&Development Institute Lanzhou 730060China

The selection of chemical reactions is directly related to the quality of synthesis pathways,so a reasonable reaction evaluation metric plays a crucial role in the design and planning of synthesis *** reaction conditions also need to be considered in synthesis pathway design,a reaction metric that combines reaction time,temperature,and yield is required for chemical reactions of different reaction *** this study,a chemical reaction graph descriptor which includes the atom-atom mapping relationship is proposed to effectively describe ***,through pre-training using graph contrastive learning and fine-tuning through supervised learning,we establish a model for generating the probability of reaction superiority(RSscore).Finally,to validate the effectiveness of the current evaluation index,RSscore is applied in two applications,namely reaction evaluation and synthesis routes analysis,which proves that the RSscore provides an important agents-considered evaluation criterion for computer-aided synthesis planning(CASP).

关键词： Computer-aided synthesis planning Neural networks Reaction evaluation indicator Reaction graph Graph contractive learning

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：