检索结果-内蒙古大学图书馆

Effect of PVAm Application for Fine Paper on Effectiveness of Optical Brightening Agent

Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry 2016年第3期48卷 23-29页

作者： Cho, Byoung-Uk Won, Jong Myoung Program of Paper Science & Engineering Division of Forest Material Science & Engineering College of Forest & Environmental Sciences Kangwon National University Gang-won-Do Chuncheon24341 Korea Republic of

Effects of cationic polyvinylamine (PVAm) dry strength agent on effectiveness of optical brightening agent (OBA) during fine papermaking and the mechanism for brightness reduction of paper by PVAm was investigated by UV/Vis spectroscopy and turbidity measurement of OBA solution with PVAm. It was shown that PVAm reduced brightness of paper while opacity was not varied and tensile strength of paper was increased. Tetra-type OBA solution showed the peaks around the wavelength of 280 nm and 330 nm and the increase in the OBA concentration increased the UV absorbance in all wavelength. Addition of PVAm into the OBA solution decreased the UV absorbance at 280 nm. Turbidities of OBA and PVAm solutions were close to zero, respectively, while the turbidity value increased for the mixed solution of OBA and PVAm in various mixing ratios and the highest value was obtained when the mixing ratio of PVAm and OBA was 5:5, meaning that cationic PVAm formed complex with anionic OBA. In conclusion, cationic PVAm could form a complex with anionic OBA and that reduced UV absorbance, resulting in the reduced brightness of paper. © 2016 Korean Technical Assoc. of the Pulp and Paper Industry. All rights reserved.

关键词： Luminance

来源：评论

学校读者我要写书评

暂无评论

Erratum: “Growth and characterization of β-Ga2O3 thin films by molecular beam epitaxy for deep-UV photodetectors” [J. Appl. Phys. 122, 095302 (2017)]

引用

Journal of Applied Physics 2018年第13期124卷

作者： Susmita Ghose Shafiqur Rahman Liang Hong Juan Salvador Rojas-Ramirez Hanbyul Jin Kibog Park Robert Klie Ravi Droopad 1Material Science Engineering and Commercialization Program Texas State University San Marcos Texas 78666 USA 2Department of Physics University of Illinois at Chicago Chicago Illinois 60607 USA 3Ingram School of Engineering Texas State University San Marcos Texas 78666 USA 4School of Electrical and Computer Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 South Korea 5Department of Physics Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 South Korea

We noticed an omission of the acknowledgment and provide it here with apologies:1

关键词：

来源：评论

学校读者我要写书评

暂无评论

Bending strength performance evaluation of glass fiber cloth reinforced cylindrical laminated veneer lumber

Journal of the Korean Wood Science and Technology

引用

Journal of the Korean Wood science and Technology 2016年第3期44卷 415-423页

作者： Lee, In-Hwan Hong, Soon-Il Division of Forest Material Science and Engineering Program of Forest Biomaterials Engineering College of Forest and Environmental Sciences Kangwon National University Chuncheon24341 Korea Republic of

Cylindrical laminated veneer lumber (LVL) is produced by winding the veneer tape on a circular cylinder. The veneer tape was produced by cutting the veneer into a rectangular shape and sewing it in a vertical direction to the fiber. The tensile strength test was carried out by producing the veneer tape specimen with different species of veneer, types and combinations of sewing yarn. The Radiata pine veneer tape produced with three sewing lines using the reinforced sewing thread had the best tensile strength. Also, the separation and snapping problems of the veneer tape were improved, resulting in the improvement in the workability of cylindrical LVL. The bending strength of various cylindrical LVL produced with different types of veneer tape and a different number of lamination layers and the application of reinforcement with glass fiber cloth was compared with that of Larix log. Bending MOR of cylindrical LVL reinforced with glass fiber cloth at the volume ratio of 11% was improved by 65% in comparison to the non-reinforced cylindrical LVL. In the case of the cylindrical LVL produced with 2 sewing lines of veneer tape, a fracture occurred at the butt joint between the veneer tapes. However, in the case of the cylindrical LVL produced with 3 sewing lines of veneer tape a fracture occurred in the fiber direction.

关键词： Glass fibers

来源：评论

学校读者我要写书评

暂无评论

Bending and bonding strength performances of larix block-glued glulam

Journal of the Korean Wood Science and Technology

引用

Journal of the Korean Wood science and Technology 2016年第3期44卷 315-322页

Block-glued glulam is a structural material that can be used as a construction member of a large-section wooden building, which is produced by edgewise bonding of two or more glulam beam elements. The edgewise bonding performance of the block-glued glulam was examined through delamination test and block shear strength test. According to the test results, the block-glued glulam that was manufactured with 1.5 MPa of compressive pressure after applying 500 g/m2 of Resorcinol adhesive showed the best edgewise bonding performance. The block-glued glulam produced in a good edgewise bonding condition was compared with a control glulam with the same section modulus for bending strength performance. The modulus of elasticity (MOE) in bending was similar to that of the control glulam. The modulus of rupture (MOR) of the block-glued glulam was higher by 27% than that of the control glulam. No interfacial failure or cohesive failure were observed in the edgewise bonding layer.

关键词： Bending strength

来源：评论

学校读者我要写书评

暂无评论

Fabrication and Properties of polyacrylic acid by ionic surfactant disturbance method

引用

Journal of Physics: Conference Series 2017年第1期901卷

作者： S Lawan T Osotchan W Chuajiw K Subannajui Advanced Material Processing Laboratory Material science and engineering program Faculty of science Mahidol University Bangkok 10400 Thailand Materials Science and Engineering Program and Capability Unit for Nanoscience and Nanotechnology Faculty of Science Mahidol University Bangkok 10400 Thailand Cementhai Ceramics Co. Ltd 1 Siam Cement Road Bangsue Bangkok 10800 Thailand

The formation of polymeric materials can be achieved by several methods such as melting and casting, screw extrusion, cross-linking of resin or rubber in a mold, and so on. In this work, the polyacrylic acid is formed by using the emulsion disturbance method. Despite extensively used in the colour painting and coating industries, acrylic emulsion can be processed into a foam and powder configuration by a reaction between acrylic emulsion and salt. The solidification hardly changes the volume between liquid emulsion and solidified polymer which means the final structure of polyacrylic acid is filled with opened air cells. The opened air cell structure is confirmed by the result from scanning electron microscopy. The chemical analysis and crystallography of acrylic powder and foam are examined by Fourier-transform infrared spectroscopy and X-ray diffraction respectively. The phase transformation and Thermal stability are studied by differential scanning calorimetry and thermo gravimetric analysis. Moreover, the mechanical properties of acrylic foam were observed by tensile, compressive and hardness test. In addition to the basic property analysis, acrylic foam was also used in the particle filtration application.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Designing a Perylene Diimide/Fullerene Hybrid as Effective Electron Transporting material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability

引用

Angewandte Chemie 2019年第25期131卷

作者： Zhenghui Luo Fei Wu Teng Zhang Xuan Zeng Yiqun Xiao Tao Liu Cheng Zhong Xinhui Lu Linna Zhu Shihe Yang Chuluo Yang Hubei Key Lab on Organic and Polymeric Optoelectronic Materials Department of Chemistry Wuhan University Wuhan 430072 P. R. China Shenzhen Key Laboratory of Polymer Science and Technology College of Materials Science and Engineering Shenzhen University Shenzhen 518060 P. R. China Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energy Faculty of Materials & Energy Southwest University Chongqing 400715 P. R. China Nano Science and Technology Program Department of Chemistry The Hong Kong University of Science and Technology Clear Water Bay Kowloon Hong Kong P. R. China Department of Physics Chinese University of Hong Kong New Territories Hong Kong P. R. China Guangdong Key Lab of Nano-Micro Material Research School of Chemical Biology and Biotechnology Shenzhen Graduate School Peking University Xili University Town Shenzhen 518055 Guangdong P. R.China

Electron transport materials (ETM) play an important role in the improvement of efficiency and stability for inverted perovskite solar cells (PSCs). This work reports an efficient ETM, named PDI‐C 60 , by the combination of perylene diimide (PDI) and fullerene. Compared to the traditional PCBM, this strategy endows PDI‐C 60 with slightly shallower energy level and higher electron mobility. As a result, the device based on PDI‐C 60 as electron transport layer (ETL) achieves high power conversion efficiency (PCE) of 18.6 %, which is significantly higher than those of the control devices of PCBM (16.6 %) and PDI (13.8 %). The high PCE of the PDI‐C 60 ‐based device can be attributed to the more matching energy level with the perovskite, more efficient charge extraction, transport, and reduced recombination rate. To the best of our knowledge, the PCE of 18.6 % is the highest value in the PSCs using PDI derivatives as ETLs. Moreover, the device with PDI‐C 60 as ETL exhibits better device stability due to the stronger hydrophobic properties of PDI‐C 60 . The strategy using the PDI/fullerene hybrid provides insights for future molecular design of the efficient ETM for the inverted PSCs.

关键词： Elektronentransportmaterial Fullerene Perowskit-Solarzellen Perylendiimide Stromwandlungswirkungsgrad

来源：评论

学校读者我要写书评

暂无评论

Signatures of Electronic Nematicity In (111) Laalo3/Srtio3 Interfaces

arXiv

引用

arXiv 2017年

作者： Davis, S. Huang, Z. Han, K. Ariando Venkatesan, T. Chandrasekhar, V. Graduate Program in Applied Physics Department of Physics and Astronomy Northwestern University 2145 Sheridan Road EvanstonIL60208 United States NUSNNI-Nanocore National University of Singapore 117411 Singapore Department of Physics National University of Singapore 117551 Singapore NUS Graduate School for Integrative Sciences & Engineering National University of Singapore 117456 Singapore Department of Electrical and Computer Engineering National University of Singapore 117576 Singapore Department of Material Science and Engineering National University of Singapore 117575 Singapore

Symmetry breaking is a fundamental concept in condensed matter physics whose presence often heralds new phases of matter. For instance, the breaking of time reversal symmetry is traditionally linked to magnetic phases in a material, while the breaking of gauge symmetry can lead to superfluidity/superconductivity. Nematic phases are phases in which rotational symmetry is broken while maintaining translational symmetry, and are traditionally associated with liquid crystals. Electronic nematic states where the orthogonal in-plane crystal directions have different electronic properties have garnered a great deal of attention after their discovery in Sr3Ru2O7,1 multiple iron based superconductors,2,3 and in the superconducting state of CuBiSe.4,5 Here we demonstrate the existence of an electronic nematic phase in the two-dimensional carrier gas that forms at the (111) LaAlO3 (LAO)/SrTiO3 (STO) interface that onsets at low temperatures, and is tunable by an electric field. Copyright © 2017, The Authors. All rights reserved.

关键词： Electronic properties

来源：评论

学校读者我要写书评

暂无评论

Magnetoresistance in the superconducting state at the (111) LaAlO3/SrTiO3 interface

arXiv

引用

arXiv 2017年

Condensed matter systems that simultaneously exhibit superconductivity and ferromagnetism are rare due the antagonistic relationship between conventional spin-singlet superconductivity and ferromagnetic order. In materials in which superconductivity and magnetic order is known to coexist (such as some heavy-fermion materials), the superconductivity is thought to be of an unconventional nature. Recently, the conducting gas that lives at the interface between the perovskite band insulators LaAlO3 (LAO) and SrTiO3 (STO) has also been shown to host both superconductivity and magnetism. Most previous research has focused on LAO/STO samples in which the interface is in the (001) crystal plane. Relatively little work has focused on the (111) crystal orientation, which has hexagonal symmetry at the interface, and has been predicted to have potentially interesting topological properties, including unconventional superconducting pairing states. Here we report measurements of the magnetoresistance of (111) LAO/STO heterostructures at temperatures at which they are also superconducting. As with the (001) structures, the magnetoresistance is hysteretic, indicating the coexistence of magnetism and superconductivity, but in addition, we find that this magnetoresistance is anisotropic. Such an anisotropic response is completely unexpected in the superconducting state, and suggests that (111) LAO/STO heterostructures may support unconventional superconductivity. Copyright © 2017, The Authors. All rights reserved.

关键词： Strontium titanates

来源：评论

学校读者我要写书评

暂无评论

Social data shoes for gait monitoring of elderly people in smart home

Social data shoes for gait monitoring of elderly people in s...

引用

Biomedical engineering International Conference (BMEiCON)

作者： Thirawut Nilpanapan Teerakiat Kerdcharoen Material Science and Engineering Program Mahidol University Bangkok Thailand NANOTEC Center of Excellence at Mahidol University National Nanotechnology Center Thailand

ISBN: (纸本)9781509039418

Gait monitoring technology has recently become of increasing interest in the biometric as well as biomedical fields for observation of the human movement, especially walking that can refer to physical status of individuals. For this objective, data shoes own many advantages such as cheaper cost and rich of direct information from the walking. In this paper, we have developed a data shoe system for gait monitoring in home area. To observe gait behaviors, the sensor suite includes five force sensitive resistors (FSRs) which were installed on the insole of the shoe. Zigbee wireless communication technology was used as low-cost data transfer between the sensor suite and the receiver system which is USB-connected to a computer. The summary of the gait data can be submitted and displayed on social media such as Facebook in order that relatives or care-takers can monitor the wearer closely. Principal component analysis (PCA) pattern recognition of the experimental data has shown that this system can classify normal and abnormal walking patterns in a group of elderly volunteers. The integration of sensors, wireless technology and social ability with computer software could make the social data shoe system monitor the gait behaviors during the wearing time.

关键词： Legged locomotion Footwear ZigBee Monitoring Foot Force Senior citizens

来源：评论

学校读者我要写书评

暂无评论

Author Correction: Enhancing untargeted metabolomics using metadata-based source annotation

引用

Nature biotechnology 2023年第11期41卷 1656页

作者： Julia M Gauglitz Kiana A West Wout Bittremieux Candace L Williams Kelly C Weldon Morgan Panitchpakdi Francesca Di Ottavio Christine M Aceves Elizabeth Brown Nicole C Sikora Alan K Jarmusch Cameron Martino Anupriya Tripathi Michael J Meehan Kathleen Dorrestein Justin P Shaffer Roxana Coras Fernando Vargas Lindsay DeRight Goldasich Tara Schwartz MacKenzie Bryant Gregory Humphrey Abigail J Johnson Katharina Spengler Pedro Belda-Ferre Edgar Diaz Daniel McDonald Qiyun Zhu Emmanuel O Elijah Mingxun Wang Clarisse Marotz Kate E Sprecher Daniela Vargas-Robles Dana Withrow Gail Ackermann Lourdes Herrera Barry J Bradford Lucas Maciel Mauriz Marques Juliano Geraldo Amaral Rodrigo Moreira Silva Flavio Protasio Veras Thiago Mattar Cunha Rene Donizeti Ribeiro Oliveira Paulo Louzada-Junior Robert H Mills Paulina K Piotrowski Stephanie L Servetas Sandra M Da Silva Christina M Jones Nancy J Lin Katrice A Lippa Scott A Jackson Rima Kaddurah Daouk Douglas Galasko Parambir S Dulai Tatyana I Kalashnikova Curt Wittenberg Robert Terkeltaub Megan M Doty Jae H Kim Kyung E Rhee Julia Beauchamp-Walters Kenneth P Wright Maria Gloria Dominguez-Bello Mark Manary Michelli F Oliveira Brigid S Boland Norberto Peporine Lopes Monica Guma Austin D Swafford Rachel J Dutton Rob Knight Pieter C Dorrestein Collaborative Mass Spectrometry Innovation Center University of California San Diego La Jolla CA USA. Skaggs School of Pharmacy and Pharmaceutical Sciences University of California San Diego La Jolla CA USA. Beckman Center for Conservation Research San Diego Zoo Wildlife Alliance Escondido CA USA. Center for Microbiome Innovation Joan and Irwin Jacobs School of Engineering University of California San Diego La Jolla CA USA. Division of Biological Sciences University of California San Diego La Jolla CA USA. Department of Pediatrics School of Medicine University of California San Diego La Jolla CA USA. Bioinformatics and Systems Biology Program University of California San Diego La Jolla CA USA. Division of Rheumatology Allergy & Immunology Department of Medicine University of California San Diego La Jolla CA USA. Division of Epidemiology and Community Health School of Public Health University of Minnesota Minneapolis MN USA. Department of Integrative Physiology University of Colorado Boulder Boulder CO USA. Department of Population Health Sciences University of Wisconsin-Madison Madison WI USA. Servicio Autónomo Centro Amazónico de Investigación y Control de Enfermedades Tropicales Simón Bolívar Puerto Ayacucho Amazonas Venezuela. Department of Pediatrics Billings Clinic Billings MT USA. Department of Animal Science Michigan State University East Lansing MI USA. Department of Pharmacology Ribeirão Preto Medicinal School Center of Research in Inflammatory Diseases University of São Paulo Ribeirão Preto Sao Paolo Brazil. Multidisciplinary Health Institute Federal University of Bahia Vitória da Conquista Bahia Brazil. NPPNS Department of Biomolecular Sciences School of Pharmaceutical Sciences of Ribeirão Preto University of São Paulo Ribeirão Preto Sao Paolo Brazil. Department of Internal Medicine Ribeirão Preto Medical School Center of Research in Inflammatory Diseases University of São Paulo Ribeirão Preto Sao Paolo Brazil. Department

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：