检索结果-内蒙古大学图书馆

2024 China automation Congress, CAC 2024

作者： Yang, Dong Lang, Xun Wu, Jiande Yu, Wanke Liu, Songhua Xie, Lei Department of Electronic Engineering Information School Yunnan University Kunming China Yunnan Key Laboratory of Intelligent Systems and Computing Yunnan University Kunming China School of Automation China University of Geosciences Wuhan China State Key Laboratory of Industrial Control Technology Zhejiang University Hangzhou China

ISBN: (纸本)9798350368604

Accurately and promptly quantifying stiction is crucial for valve maintenance in industrial settings and ensuring the stability of control loop performance. However, current Hammerstein-based stiction quantification methods overlook valve dynamics, potentially leading to inaccurate quantification. Therefore, this paper proposes a novel stiction quantification method based on an adaptive differential evolution algorithm. In addition to considering the impact of valve dynamics on stiction, the proposed method demonstrates a certain level of robustness against the interference of unknown noise. Finally, the effectiveness of the proposed method is demonstrated through a series of simulations and industrial case studies. © 2024 IEEE.

关键词： Adaptive algorithms

来源：评论

学校读者我要写书评

暂无评论

引用

2024 China automation Congress, CAC 2024

作者： Lang, Yumin Wu, Jiande Lang, Xun Yu, Wanke Yang, Chuanyan Su, Hongye Department of Electronic Engineering Information School Yunnan University Kunming China Yunnan Key Laboratory of Intelligent Systems and Computing Yunnan University Kunming China School of Automation China University of Geosciences Wuhan China State Key Laboratory of Industrial Control Technology Zhejiang University Hangzhou China

ISBN: (纸本)9798350368604

Oscillation is a significant indication of the deterioration of control system performance and needs to be carefully monitored to ensure safe and stable process operations. However, industrial processes are often prone to noisy artifacts and nonstationary trends, resulting in low signal-to-noise ratios. In order to tackle this problem, this study introduces a novel framework for enhanced trend removal and noise reduction, which is featured by the following steps:(i) The circulant singular spectrum analysis (CiSSA) is used to decompose oscillation data into several reconstructed components (RCs). (ii) The estimated power spectral density (PSD) ofthese RCs is then smoothed using the Savitzky-Golay filter (SGF) to eliminate noise and identify the RCs corresponding to oscillatory components. (iii) These identified RCs are subsequently reconstructed to produce purified oscillatory data. The effectiveness of the suggested approach is validated using simulations and real-world industrial case studies. The findings indicate that the method notably enhances the quality of oscillatory data. © 2024 IEEE.

关键词： Power spectral density

来源：评论

学校读者我要写书评

暂无评论

Dynamic Performance Prediction in Batch-Based Assembly System with Bernoulli Machines and Changeovers

引用

Complex System Modeling and Simulation 2022年第3期2卷 224-237页

作者： Zunjun Wang Zhiyang Jia Xiuxuan Tian Jingchuan Chen Bei Pan State Key Laboratory of Intelligent Control and Decision of Complex Systems School of AutomationBeijing Institute of TechnologyBeijing 100081China Department of Industrial and Manufacturing Systems Engineering University of Hong KongHong Kong 999077China School of Engineering Tokyo University of TechnologyTokyo 192-0982Japan

Worldwide competition and diverse demand of customers pose great challenges to manufacturing enterprises. How to organize production to achieve high productivity and low cost becomes their primary task. In the mean time, the rapid pace of technology innovation has contributed to the development of new types of flexible automation. Hence, increasing manufacturing enterprises convert to multi-product and small-batch production, a manufacturing strategy that brings increased output, reduced costs, and quick response to the market. A distinctive feature of small-batch production is that the system operates mainly in the transient states. Transient states may have a significant impact on manufacturing systems. It is therefore necessary to estimate the dynamic performance of systems. As the assembly system is a typical class of production systems, in this paper, we focus on the problem of dynamic performance prediction of the assembly systems that produce small batches of different types of products. And the system is assumed to be characterized with Bernoulli reliability machines, finite buffers, and changeovers. A mathematical model based on Markovian analysis is first derived and then, the analytical formulas for performance evaluation of three-machine assembly systems are given. Moreover, a novel approach based on decomposition and aggregation is proposed to predict dynamic performance of large-scale assembly systems that consist of multiple component lines and additional processing machines located downstream of the assemble machine. The proposed approach is validated to be highly accurate and computationally efficient when compared to Monte Carlo simulation.

关键词： flexible assembly system dynamic performance Bernoulli machines finite buffers changeovers

来源：评论

学校读者我要写书评

暂无评论

ReFlow6D: Refraction-Guided Transparent Object 6D Pose Estimation via Intermediate Representation Learning

arXiv

引用

arXiv 2024年

作者： Gupta, Hrishikesh Thalhammer, Stefan Weibel, Jean-Baptiste Haberl, Alexander Vincze, Markus Vision for Robotics Laboratory Automation and Control Institute TU Wien Austria Industrial Engineering Department UAS Technikum Vienna TU Wien Austria

Transparent objects are ubiquitous in daily life, making their perception and robotics manipulation important. However, they present a major challenge due to their distinct refractive and reflective properties when it comes to accurately estimating the 6D pose. To solve this, we present ReFlow6D, a novel method for transparent object 6D pose estimation that harnesses the refractive-intermediate representation. Unlike conventional approaches, our method leverages a feature space impervious to changes in RGB image space and independent of depth information. Drawing inspiration from image matting, we model the deformation of the light path through transparent objects, yielding a unique object-specific intermediate representation guided by light refraction that is independent of the environment in which objects are observed. By integrating these intermediate features into the pose estimation network, we show that ReFlow6D achieves precise 6D pose estimation of transparent objects, using only RGB images as input. Our method further introduces a novel transparent object compositing loss, fostering the generation of superior refractive-intermediate features. Empirical evaluations show that our approach significantly outperforms state-of-the-art methods on TOD and Trans32K-6D datasets. Robot grasping experiments further demonstrate that ReFlow6D’s pose estimation accuracy effectively translates to real-world robotics task. The source code is available at: https://***/StoicGilgamesh/ReFlow6D and https://***/StoicGilgamesh/matting *** Codes 68T45 © 2024, CC BY-NC-SA.

关键词： Light refraction

来源：评论

学校读者我要写书评

暂无评论

ZS6D: Zero-shot 6D Object Pose Estimation using Vision Transformers

ZS6D: Zero-shot 6D Object Pose Estimation using Vision Trans...

引用

IEEE International Conference on robotics and automation (ICRA)

作者： Philipp Ausserlechner David Haberger Stefan Thalhammer Jean-Baptiste Weibel Markus Vincze Vision for Robotics Laboratory Automation and Control Institute TU Wien Austria Industrial Engineering Department University of Applied Sciences Technikum Vienna Austria

ISBN: (数字)9798350384574

ISBN: (纸本)9798350384581

As robotic systems increasingly encounter complex and unconstrained real-world scenarios, there is a demand to recognize diverse objects. The state-of-the-art 6D object pose estimation methods rely on object-specific training and therefore do not generalize to unseen objects. Recent novel object pose estimation methods are solving this issue using task-specific fine-tuned CNNs for deep template matching. This adaptation for pose estimation still requires expensive data rendering and training procedures. MegaPose for example is trained on a dataset consisting of two million images showing 20,000 different objects to reach such generalization capabilities. To overcome this shortcoming we introduce ZS6D, for zero-shot novel object 6D pose estimation. Visual descriptors, extracted using pre-trained Vision Transformers (ViT), are used for matching rendered templates against query images of objects and for establishing local correspondences. These local correspondences enable deriving geometric correspondences and are used for estimating the object's 6D pose with RANSAC- based PnP. This approach showcases that the image descriptors extracted by pre-trained ViTs are well-suited to achieve a notable improvement over two state-of-the-art novel object 6D pose estimation methods, without the need for task-specific fine-tuning. Experiments are performed on LMO, YCBV, and TLESS. In comparison to MegaPose, we improve the Average Recall on all three datasets and compared to OSOP we improve on two datasets. The code is available at https://***/PhilippAuss/ZS6D.

关键词： Training Computer vision Visualization Codes Computational modeling Pose estimation Transformers

来源：评论

学校读者我要写书评

暂无评论

Deep Learning-Based Prediction of Subsurface Oil Reservoir Pressure Using Spatio-Temporal Data 49

Deep Learning-Based Prediction of Subsurface Oil Reservoir P...

引用

49th Annual Conference of the IEEE industrial Electronics Society, IECON 2023

作者： Cheng, Haibo He, Yunpeng Zeng, Peng Li, Shichao Vyatkin, Valeriy Shenyang Institute of Automation Chinese Academy of Sciences State Key Laboratory of Robotics Shenyang China Chinese Academy of Sciences Key Laboratory of Networked Control Systems Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Luleå University of Technology Department of Computer Science Electrical and Space Engineering Luleå Sweden Aalto University Department of Electrical Engineering and Automation Helsinki Finland

ISBN: (纸本)9798350331820

Prediction of subsurface oil reservoir pressure are critical to hydrocarbon production. However, the accurate pressure estimation faces great challenges due to the complexity and uncertainty of reservoir. The underground seepage flow and petrophysical parameters (permeability and porosity) are important but difficult to measure in oilfield. Deep learning methods have been successfully used in reservoir engineering and oil & gas production process. In this study, the effective but inaccessible subsurface seepage fields are not used, only the spatial coordinates and temporal information are selected as model input to predict reservoir pressure. A stacked GRU-based deep learning model is proposed to map the relationship between spatio-temporal data and reservoir pressure. The proposed deep learning method is verified by using a three-dimensional reservoir model, and compared with commonly-used methods. The results show that the stacked GRU model has a better performance and higher accuracy than other deep learning or machine learning methods in pressure prediction. © 2023 IEEE.

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

Automated Disassembly Sequence Prediction for Industry 4.0 Using Enhanced Genetic Algorithm

引用

Computers, Materials & Continua 2021年第11期69卷 2531-2548页

作者： Anil Kumar Gulivindala M.V.A.Raju Bahubalendruni R.Chandrasekar Ejaz Ahmed Mustufa Haider Abidi Abdulrahman Al-Ahmari Department of Mechanical Engineering Industrial Robotics and Manufacturing Automation LaboratoryNational Institute of TechnologyKariakal609609India Department of Computer Science Engineering National Institute of TechnologyKariakal609609India Raytheon Chair for Systems Engineering Advanced Manufacturing InstituteKing Saud UniversityRiyadh11421Saudi Arabia Industrial Engineering Department College of EngineeringKing Saud UniversityRiyadh11421Saudi Arabia

The evolution of Industry 4.0 made it essential to adopt the Internet of Things(IoT)and Cloud Computing(CC)technologies to perform activities in the new age of *** technologies enable collecting,storing,and retrieving essential information from the manufacturing *** collected at sites are shared with others where execution automatedly *** obtained information must be validated at manufacturing to avoid undesirable data losses during the de-manufacturing ***,information sharing from the assembly level at the manufacturing stage to disassembly at the product end-of-life state is a major *** current research validates the information optimally to offer a minimum set of activities to complete the disassembly *** optimal disassembly sequence plan(DSP)can possess valid information to organize the necessary actions in ***,finding an optimal DSP is complex because of its combinatorial *** genetic algorithm(GA)is a widely preferred artificial intelligence(AI)algorithm to obtain a near-optimal solution for the DSP *** converging nature at local optima is a limitation in the traditional *** study improvised the GA workability by integrating with the proposed priori crossover *** optimality function is defined to reduce disassembly effort by considering directional changes as *** enhanced GA method is tested on a real-time product to evaluate the *** obtained results reveal that diversity control depends on the operators employed in the disassembly *** proposed method’s solution can be stored in the cloud and shared through IoT devices for effective resource allocation and disassembly for maximum recovery of the *** effectiveness of the proposed enhanced GA method is determined by making a comparative assessment with traditional GA and other AI methods at different population sizes.

关键词： automation internet of things disassembly sequence planning priori cross over operator enhanced GA disassembly predicates

来源：评论

学校读者我要写书评

暂无评论

Acquiring feedback into the manufacturing process design from industrial policies

引用

Procedia CIRP 2024年 128卷 579-584页

作者： Alexios Papacharalampopoulos Manolis Toupalis Panagiotis Lagios Olga Maria Karagianni Panagiotis Stavropoulos Laboratory for Manufacturing Systems and Automation (LMS) Department of Mechanical Engineering and Aeronautics University of Patras Rio Patras 26504 Greece Gizelis Robotics Schimatari Viotias 32009 Kormatzini Area Greece

The regulatory and social framework of European industry can be demanding, i.e. in terms of achieving different strategies, such as Industry 4.0 and Industry 5.0. To study this co-existence of strategies, a circular cell is utilized herein. It has been implemented based on a specific design, meeting requirements for an automotive microfactory and under the concept of circular economy. The objective of the cell has been to address resources efficiency and partial digitalization of workflows towards human-in-the-loop remanufacturing parts of electric vehicles. The process chain includes removal and joining processes, the processed part has been of medium complexity, and the workflow has engaged several digital tools, as a result of the quality monitoring requirements. The cell has been operational and various qualitative metrics have been elaborated. Subsequently, feedback is extracted towards the design for future applications pertaining to both circular economy and Industry 5.0. As such, in addition to the environmental sustainability implied by the resources efficiency, the production resilience and the human-centricity of the jobs involved are also regarded as extra requirements. Also, the connection to the ecosystem is taken into consideration. Finally, guidelines for future designs are also extracted.

关键词： Manufacturing process Cell Industry 5.0 application design criteria

来源：评论

学校读者我要写书评

暂无评论

Retinal disorder diagnosis based on hybrid deep learning models

引用

Multimedia Tools and Applications 2025年 1-25页

作者： Sedik, Ahmed El-Shafai, Walid El-Hag, Noha A. El-Banby, Ghada M. Abd El-Samie, Fathi E. Smart Systems Engineering Laboratory College of Engineering Prince Sultan University Riyadh11586 Saudi Arabia Department of the Robotics and Intelligent Machines Faculty of Artificial Intelligence Kafrelsheikh University Kafr el-Sheikh Egypt Computer Science Department Prince Sultan University Riyadh11586 Saudi Arabia Department of Electronics and Electrical Communications Engineering Faculty of Electronic Engineering Menoufia University Menouf32952 Egypt The Higher Institute of Commercial Sciences Algarbia Al Mahalla Al Kubra31951 Egypt Department of Industrial Electronics and Control Engineering Faculty of Electronic Engineering Menoufia University Menouf32952 Egypt Department of Information Technology College of Computer and Information Sciences Princess Nourah Bint Abdulrahman University P.O. Box 84428 Riyadh11671 Saudi Arabia

Anomaly detection from medical images is badly needed for automated diagnosis. For example, medical images obtained with several modalities, such as magnetic resonance (MR) and confocal microscopy, need to be classified for anomaly detection. The MR images may contain tumors that need to be detected with anomaly detection techniques. In MR imaging, brain tumors are represented as areas composed of abnormal cells that need to be detected. On the other hand, confocal microscopy can be used for retinal imaging. Hence, there is a need to apply classification techniques for diagnosing diseases of the eye, such as Diabetic Retinopathy (DR), which leads to exudates in different regions of the retina. The detection of exudates is necessary for the diagnosis of DR. In this paper, two models are presented for the classification of MR and retinal images. Much research has been done in this area, but it did not achieve high accuracy of classification in an acceptable time. In addition, the previous models did not consider both types of image modalities considered in this paper. The suggested models are Convolutional Neural Network (CNN) and Convolutional Long Short-Term Memory (Conv-LSTM). They are used to classify normal and abnormal cases of both brain tumor and DR diseases. The CNN model is composed of six convolutional layers and six max-pooling layers. A soft-max activation function takes the classification decision. The proposed Conv-LSTM model is composed of three stages: pre-processing, feature extraction, and classification. The deep learning model performance is better than those of traditional networks. The CNN gives an accuracy of 94.26% for DR classification and 95.8% for brain tumor classification, while the Conv-LSTM gives the maximum accuracy of 96.41% for DR classification and 97.4% for brain tumor classification. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025.

关键词： Confocal microscopy

来源：评论

学校读者我要写书评

暂无评论

A Vision-Based Two-Stage Fruit Outer Diameter Detection Method

A Vision-Based Two-Stage Fruit Outer Diameter Detection Meth...

引用

2024 IEEE International Conference on robotics and Biomimetics, ROBIO 2024

作者： Hao, Yifei Yan, Shuaizheng Wu, Zhengxing He, Bingwei Li, Chenghua Yu, Junzhi Fuzhou University Department of Mechanical Engineering Fuzhou350108 China Institute of Automation Chinese Academy of Sciences Laboratory of Cognitive and Decision Intelligence for Complex Systems Beijing100190 China Institute of Automation Chinese Academy of Sciences Key Laboratory of Cognition and Decision Intelligence for Complex Systems Beijing100190 China School of Artificial Intelligence University of Chinese Academy of Sciences Beijing100049 China Guangzhou Shenghui Cleaning Service Co. Ltd. Guangzhou511436 China BIC-ESAT College of Engineering Peking University State Key Laboratory for Turbulence and Complex Systems Department of Advanced Manufacturing and Robotics Beijing100871 China

ISBN: (纸本)9781665481090

Regarding the mobile monitoring system in agricultural automation, the outer diameter monitoring of greenhouse vegetables has significant implications for accurately regulating fruit growth and cultivation plans. In this paper, a novel vision-based two-stage outer diameter detection method is proposed, including the segmentation and outer diameter calculation of greenhouse tomato images. To address the issues of multiple tomatoes in a single image and the similarity in color between tomatoes and the background, a YOLOv8 network embedded with convolutional block attention module is constructed for detection and segmentation in the first stage. Additionally, to solve the problem of inaccurate outer diameter detection caused by different tomato poses and pedicles, a defined central axis method is proposed, which can adaptively filter out the maximum outer diameter candidates and calculate accurate values utilizing depth information in the world coordinate system. The backbone network is fine-tuned on the pre-trained YOLOv8 model with 1000 tomato images. Extensive measurement experiments, involving 215 tomatoes in 80 images, is conducted to validate the effectiveness of our proposed approach. Compared to the ground truth, we obtain a measurement error of 4.27 mm, the coefficient of determination value R2 is 0.9349. © 2024 IEEE.

关键词： Fruits

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：