检索结果-内蒙古大学图书馆

IEEE Conference on Decision and Control

作者： S. Ramaswamy K.P. Valavanis S. Barber The Laboratory for Intelligent Processes and Systems The Department of Electrical and Computer Engineering University of Texas Austin Austin TX USA The Robotics and Automation Laboratory The Center for Advanced Computer Studies and the Apparel-CIM Center University of Southwestern Louisiana Lafayette LA USA

The construction and analysis of multiple-input multiple-output (MIMO) subnets is discussed. It is shown that hierarchical time-extended Petri nets (H-EPNs) allow the development of structured MIMO subnets through the use of bottom-up Petri net synthesis techniques. The paper analyzes Petri net extensions that allow a truly hybrid approach to Petri net based systems modeling, analysis and development. The case study emphasizes the advantage of the activator arc extension in studying issues such as static priority scheduling, dynamic failure recognition, and rescheduling in manufacturing systems. The SPNP package, suitably modified to handle the H-EPN extensions, is used to analyze the properties of the derived H-EPN model.

关键词： MIMO Petri nets Failure analysis Job shop scheduling Dynamic scheduling Modeling Timing Manufacturing Packaging Solids

来源：评论

学校读者我要写书评

暂无评论

Task-based servoing in quaternion space

Task-based servoing in quaternion space

引用

IEEE International Conference on robotics and automation (ICRA)

作者： L. Singh H. Stephanou New York State Center for Advanced Technology in Robotics Automation and Manufacturing and Department of Electrical Computer and Systems Engineering Rensselaer Polytechnic Institute Troy NY USA

This paper introduces and analyzes a method based on vector-quaternion pairs for accomplishing task-based control. The optimal control paradigm has been extended into quaternion space with a complete definition of the control law required to control a plant in such a space. A complete set of derivations of the quaternion algebra used to accomplish the optimal control have also been developed. The advantage of this approach is that it decouples the position and orientation states, thereby reducing the complexity of the control algorithms. The intended application of this research is task-level control of the five-fingered Anthrobot mounted on a PUMA 760.

关键词： Quaternions Optimal control Space technology Orbital robotics Force control robotics and automation Manufacturing automation computer aided manufacturing Motion control Acceleration

来源：评论

学校读者我要写书评

暂无评论

Depth extraction using lateral or axial camera motion: an integration of depth from motion and stereo

Depth extraction using lateral or axial camera motion: an in...

引用

IEEE International Conference on Image Processing

作者： A.K. Dalmia M.M. Trivedi Web Systems Group Datacube Inc. Danvers MA USA Computer Vision and Robotics Research Laboratory Electrical and Computer Engineering Department University of Tennessee Knoxville TN USA

We present an integrated methodology that can be used to extract the depth from a sequence of images. The method combines the ability of stereo processing to acquire highly accurate depth measurements and the efficiency of spatial and temporal gradient analysis. As a result of this integration, depth measurements of a high quality are obtained at a speed approximately ten-times higher than that of stereo processing. Without any a priori information of the locations of the points in the scene, the correspondence problem in stereo processing is computationally expensive. In our approach, we use the spatial and temporal gradient analysis, which has been shown to provide the depth with a high efficiency but limited accuracy, to guide the stereo matching process. Experiments for lateral and axial camera translations have acquired depth results with a mean error of less than 3 percent.

关键词： Cameras Displacement measurement Robot vision systems computer vision Equations Laboratories Data engineering Velocity measurement Layout Energy resolution

来源：评论

学校读者我要写书评

暂无评论

Tetrobot: A Modular System for Hyper-Redundant Parallel robotics

Tetrobot: A Modular System for Hyper-Redundant Parallel Robo...

引用

IEEE International Conference on robotics and automation (ICRA)

作者： G.J. Hamlin A.C. Sanderson Electrical Computer and Systems Engineering Department Rensselaer Polytechnic InstituteNew York State Center for Advanced Technology in Automation and Robotics Rensselaer Polytechnic Institute RPI Troy NY USA

A modular system for the design, implementation, and control of a class of highly redundant parallel robotic mechanisms is described. The Tetrobot system features a novel concentric multilink spherical (CMS) joint which allows an arbitrary number of links to share a common center of rotation. The CMS joint facilitates the construction of a wide variety of variable geometry truss mechanisms using an integrated control and computational framework. A distributed control algorithm is based on an iterative virtual force based solution which propagates the goal positions of target nodes to determine systematic adjustments of actuators. Capabilities of the Tetrobot system have been demonstrated by the construction of several configurations of up to 18 nodes, 48 links, and 15 actuators. Implementations of a double Stewart platform and a six-legged walker, constructed from the same set of parts, are described in this paper.

关键词： Parallel robots Collision mitigation Actuators Concurrent computing Design engineering systems engineering and theory Electric variables control Control systems Computational geometry Centralized control

来源：评论

学校读者我要写书评

暂无评论

Design of a structured light sensor for in situ calibration

Design of a structured light sensor for in situ calibration

引用

IEEE International Workshop on Intelligent Robots and systems (IROS)

作者： F.W. DePiero R.L. Kress Computer Vision and Robotics Research Laboratory Electrical and Computer Engineering Department University of Tennessee Knoxville TN USA Roboticsand Process Systems Division Oak Ridge National Laboratory Oak Ridge TN USA

This paper highlights a ranging sensor that can be calibrated at standoffs of 1 to 3 feet with a depth of field of /spl ap/1 ft. Tests at a 16" standoff have produced a 0.004 inch standard deviation in height measurement errors. The data density and field of view are programmable. The sensor is positioned robotically, allowing it to provide accurate, shed-range measurements prior to manipulation tasks. The sensor head is relatively inexpensive (/spl ap/$10 k) and is designed for in situ calibration. This approach is intended to allow replacement components to be installed, calibrated, and validated without decontamination. Calibration, validation and data acquisition are all designed to be performed remotely and in a highly automated fashion. These in situ features of the design are targeted for the interest of industry with the aim of producing a sensor having a longer lifetime and a lower maintenance cost.

关键词： Calibration Testing Measurement standards Measurement errors Robot sensing systems Position measurement Decontamination Data acquisition Sensor phenomena and characterization Costs

来源：评论

学校读者我要写书评

暂无评论

Improvement of convergence speed for subband adaptive digital filter using the multirate repeating method

引用

ELECTRONICS AND COMMUNICATIONS IN JAPAN PART III-FUNDAMENTAL ELECTRONIC SCIENCE 1995年第10期78卷 37-45页

作者： Kiya, H Nishikawa, K Ashihara, K Faculty of Technology Tokyo Metropolitan University Hachioji Japan 192-03 Members Kiyoshi Nshikawa graduated in 1990 from the Department of Electrical Engineering Tokyo Metropolitan University where he completed the Master's Program in 1992 and affiliated with Nippon Steel Co. Computer Systems Laboratory. He was a Research Associate in 1993 in the Department of Elect. Inf. Eng. Tokyo Metropolitan University engaged in research onadaptive signal processing and information source coding. He is a member of the IEEE. Associate Member

The subband adaptive system, where the idea of the filter bank is applied to the adaptive filter, has a feature that a higher-order adaptation can be reduced to lower-order adaptations. The reduction of the order of the adaptive filter is related closely to the number of channels and the decimation ratio. The order of adaptive digital filter (ADF) is decreased greatly when the number of subbands is increased, and the decimation ratio is increased up to the maximum value. Then, however, the number of coefficient-updates per unit time is decreased, which results in the deterioration of the convergence Speed. From such a viewpoint, this paper discusses a method to improve the convergence speed, which is deteriorated in the subband adaptive system, due to the decimation. The idea of the proposed method is to utilize effectively the data which have been discarded in the decimation process and to improve the convergence speed. It is called the multirate repeating method. As the first step, the multirate repeating method is applied to the conventional subband adaptive system and the convergence speed is improved. Then a subband adaptive system is introduced in which the multirate repeating method can be utilized more effectively. As a result, a faster convergence is realized while retaining the ADF order-reduction effect, which is an advantage of the subband adaptive system.

关键词： adaptive signal processing subband adaptive system multirate repeating method rational decimation

来源：评论

学校读者我要写书评

暂无评论

CONCURRENT LARGE-SIGNAL SIMULATION OF AN ACTIVE MICROSTRIP ANTENNA

引用

INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-ELECTRONIC NETWORKS DEVICES AND FIELDS 1995年第1期8卷 3-12页

作者： MCDOWALL, DS FUSCO, VF High Frequency Electronics Laboratory. Department of Electrical and Electronic Engineering The Queen's University of Belfast Ashby Building Stranmillis Road Belfast BT9 5AH U.K. D. Stewart McDowall was born in Dublin Republic of Ireland in 1967. He received the M. Eng. degree in Electrical and Electronic Engineering from the Queen's University of Belfast in 1990. In the same year he was presented with a Distinction Award from the Departmnet of Education of Northern Ireland and he is currently pursuing his Ph.D. in the Microwave Research Group at Q.U.B. His principal research area is the electromagnetic field mapping of microwave systems using concurrent programming. He is an Associate Member of the Institute of Electrical Engineers. Vincent F. Fusco was educated at the Queens's University of Belfast where he obtained the degree of Ph.D. in 1982. He has worked as a research engineer on short-range radar and radio telemetry systems. Currently he is a reader in Microwave Communications in the School of Electrical engineering and Computer Science the Queen's University of Belfast. His current research interests include non-linear microwave circuit simulatino and concurrent programming techniques for electromagnetic field problems with particular emphasis on EMC applications. He has published numerous research papers in these areas. He is the author of the bookMicrowave Circuits Analysis and Computer Aided Design Prentice-Hall 1987. Dr Fusco is a Chartered Electrical Engineer and a Member of the Institute of Electrical Engineers.

This paper details the use of a circuit-based EM modelling technique combined with a harmonic balance simulator used to model the radiation from the microstrip bodies comprising an active antenna circuit. The modelling approach adopted for the planar bodies in the circuit will be shown to allow the use of concurrent algorithms in order to reduce overall computational time.

关键词： Microstrip antennas

来源：评论

学校读者我要写书评

暂无评论

Steady‐state security evaluation of electrical power systems by means of artificial neural network

引用

European Transactions on electrical Power 1995年第2期5卷 91-97页

作者： Chiodo, E. Menniti, D. Testa, A. Picardi, C. Elio Chiodo (1959) received the degree in Electronics Engineering in 1985 and the Ph.D. degree in Computational Statistics both from the University of Naplefltaly. He is a Researcher at the Department of Electrical Engineering of the University of Naples and a member of the Italian Statistical Society. His areas of interest include probabilistic methods applied to electric power systems analysis. (University of Naples Fedrrico 11. Electrical Engineering Dept.via Claudio 21 1-80125 Naplefltaly T +3981/7683226 Fax+3981/2396897) Daniele Menniti (1958) received the degree in Electrical Engineering from the University of Calabria. Cosenzataly and the Ph.D. degree in Electrical Engineering from the University of NapleslItaly in 1984 and 1989 respectively. He is a researcher at the Electronic. Computer and Systems Science Department of the University of Calabria. Italy. Hiscurrent research interests concern electric power system analysis real-time control and automation. (University of Calabria Electronic Computer and Systems Science Dep. Arcavacataji Rende (CS). 1-87036 CosenzdItaly T +39984/494707. Fax +39984/4947 13) Alfredo Testa (1950) received the degree in Electrical Engineering from the University of Naples/Italy in 1975. He is an Associate Professor in Electrical Power Systems at the Department of Electrical Engineering of the University of Naples. He is engaged in researches on electrical power systems reliability and harmonic analysis. (University of Naples Federico 11. Electrical Engineering Dep. via Claudio '2 1 1-80 I25 NapleslItaly T + 39 8 I/7 68 3'2 11. Fax+3981/2396897) Ciro Picardi (1949) received the degree in Electronics Engineering from the University of Naples/Italy in 1975. He is currently Associate Professor in Process Control at the Department of Electronic Computer and System Science of the University of Calabria. Italy. His current research interests are in the area of electrical drives robotics neural networks and fuzzy control. (University of Calabria Electronic. Compu

An artificial‐neural‐network (ANN) application for steady‐state security evaluation of electrical power systems is presented. Such application is based upon a combined use of a multilayer back‐propagation neural network and of an opportune electrical system model, previously proposed by some of the authors. In the paper, the definition of steady‐state security and the problems arising from its on‐line evaluation are briefly recalled. Then, the ANN utilized is described with particular reference to the solutions adopted by the authors. Afterwards, some remarks on the system model utilized are reported. Finally, numerical applications on the AEP‐14 bus system are presented and the results obtained with different ANN configurations are analyzed. Copyright © 1995 John Wiley & Sons, Ltd.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Multiagent fault‐diagnosis expert system in power systems

引用

European Transactions on electrical Power 1995年第5期5卷 341-347页

作者： Wang, J.P. Trécat, J. Dr. Jianping Wang is a doctor fellow in the Faculte Polytechnique de Mons in Belgium. His current research field is parallel processing applications in power systems. Dr. Wang obtained his BS degree from Southwest Jiaotong University in P.R. Chinain 1982. From 1982 to 1990 he was appointed as an assistant lecturer. lecturer and associate professor respectively in the electrical engineering department of Southwest Jiaotong University. He obtained his Ph.D in the FacultC Polytechnique de Mons in July of 1993. (BD Dolez 3 1 FPMS B-7000 Mons Belgium T +32-65/37 41 87 Fax +32-65/37 43 00) Professor J. Trécat is a director in the power system laboratory in the Faculty Polytechnique de Mons. He obtained his Ph.D in the University of Manchester Institute of Science and Technology(UM1ST) in U.K. in 1970. He has been working in the fields of power system automation artificial intelligence application and computer vision in the Facult6 Polytechnique de Mons since 1970. He is a senior member of IEEE and he has made much contribution both in electrical engineering education and research. (BD Dolez 3 I FPMS B-7000 Mons T +32-651374185. Fax +32-6513743 00)

In order to solve the speed problem and shallow reasoning problem met in current research in fault diagnosis expert system, this paper presents a model based parallel fault diagnosis expert system for energy management systems (EMS). The Petri net model, which corresponds to the relationship between power system components and their protection systems, has been used for the inference in fault diagnosis. A multiagent parallel processing expert system, which is based on five transputers in Sun workstation, has been built for fault diagnosis purposes. The test results show that this expert system is not only fast but also has better performances. Copyright © 1995 John Wiley & Sons, Ltd.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Position and force control of a multifingered hand: a comparison of fuzzy logic to traditional PID control

Position and force control of a multifingered hand: a compar...

引用

IEEE International Workshop on Intelligent Robots and systems (IROS)

作者： D. Hristu J. Babb H. Singh S. Gottschlich NYS Center for Advanced Technology in Automation and Robotics and Electrical Computer and Systems Engineering Department Rensselaer Polytechnic Institute Troy NY USA

In this paper we will discuss the control of a five-fingered, 18 degree of freedom, tendon driven robot hand known as the Atlas Anthrobot. Developing a traditional PID controller for this hand has proved difficult because the behavior of the tendon drive system produces is highly nonlinear. This nonlinear nature of the system however does suggest it as a candidate for fuzzy control. Along these lines we have developed a PID control system and a fuzzy control system for the hand which are both capable of simultaneously controlling the position of the fingertips and the amount of force exerted through a contact point on the fingertip. In this paper we will present a comparison between the two systems in order to generally make statements about the appropriateness of each controller for controlling complicated tendon driven devices such as our robot hand.< >

关键词： Force control Fuzzy logic Three-term control Control systems Robots Fingers Tendons Fuzzy control robotics and automation Automatic control

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：