检索结果-内蒙古大学图书馆

Characteristic model-based control of aerial manipulator for improved interaction stability

Science China(Technological Sciences) 2025年第4期68卷 166-178页

作者： Bingkai XIU Zhan LI Yipeng YANG Huijun GAO Research Institute of Intelligent Control and Systems Harbin Institute of TechnologyHarbin150001China State Key Laboratory of Robotics and Systems(HIT) Harbin Institute of TechnologyHarbin150001China

Maintaining contact stability is crucial when the aerial manipulator interacts with the surrounding environment. In this paper, a novel output feedback framework based on a characteristic model is proposed to improve the contact stability of the aerial manipulator. First, only position measurements of the aerial manipulator are introduced to design the practical finite-time command filter-based force observer. Second, an attitude control architecture including characteristic modeling and controller design is presented. In the modeling part, input-output data is utilized to build the characteristic model with fewer parameters and a simpler structure than the traditional dynamic model. Different from conventional control methods, fewer feedback values,namely only angle information, are required for designing the controller in the controller part. In addition, the convergence of force estimation and the stability of the attitude control system are proved by the Lyapunov analysis. Numerical simulation comparisons are conducted to validate the effectiveness of the attitude controller and force observer. The comparative results demonstrate that the tracking error of x and θ channels decreases at least 10.62% and 10.53% under disturbances and the force estimation precision increases at least 45.19% in the different environmental stiffness. Finally, physical flight experiments are conducted to validate the effectiveness of the proposed framework by a self-built aerial manipulator platform.

关键词： aerial manipulator interaction stability contact force observer characteristic model

来源：评论

学校读者我要写书评

暂无评论

Soft Resource Slicing for Industrial Mixed Traffic in 5G Networks

引用

IEEE/CAA Journal of Automatica Sinica 2025年第2期12卷 463-465页

作者： Jingfang Ding Meng Zheng Haibin Yu the State Key Laboratory of Robotics and the Key Laboratory of Networked Control Systems Chinese Academy of Sciences the Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences the University of Chinese Academy of Sciences IEEE

Dear Editor,This letter proposes a dynamic switching soft slicing strategy for industrial mixed traffic in 5G networks. Considering two types of traffic, periodic delay-sensitive (PDS) traffic and sporadic delay-tolerant (SDT) traffic, we design a dynamic switching strategy based on a traffic-Qo S-aware soft slicing (TQASS) scheme and a resource-efficiency-aware soft slicing (REASS) scheme.

关键词：

来源：评论

学校读者我要写书评

暂无评论

An intelligent matching method for the equivalent circuit of electrochemical impedance spectroscopy based on Random Forest

引用

材料科学技术（英文版） 2025年第6期209卷 300-310页

作者： Wenbo Chen Bingjun Yan Aidong Xu Xin Mu Xiufang Zhou Maowei Jiang Changgang Wang Rui Li Jie Huang Junhua Dong Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110169China Shenyang Institute of Automation Chinese Academy of SciencesShenyang 110169China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China University of Chinese Academy of Sciences Beijing 100049China Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110169China Shenyang Institute of Automation Chinese Academy of SciencesShenyang 110169China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China General Research Institute China Oil & Gas Pipeline Network CorporationLangfang 065000China

One of the core works of analyzing Electrochemical Impedance Spectroscopy(EIS)data is to select an appropriate equivalent circuit model to quantify the parameters of the electrochemical reaction ***,this process often relies on human experience and judgment,which will introduce subjectivity and *** this paper,an intelligent approach is proposed for matching EIS data to their equivalent circuits based on the Random Forest *** can automatically select the most suitable equivalent circuit model based on the characteristics and patterns of EIS *** the typical scenario of metal corrosion,an atmospheric corrosion EIS dataset of low-carbon steel is constructed in this paper,which includes five different corrosion *** dataset was used to validate and evaluate the pro-posed method in this *** contributions of this paper can be summarized in three aspects:(1)This paper proposes a method for selecting equivalent circuit models for EIS data based on the Random Forest algorithm.(2)Using authentic EIS data collected from metal atmospheric corrosion,the paper es-tablishes a dataset encompassing five categories of metal corrosion scenarios.(3)The superiority of the proposed method is validated through the utilization of the established authentic EIS *** ex-periment results demonstrate that,in terms of equivalent circuit matching,this method surpasses other machine learning algorithms in both precision and ***,it shows strong applicability in the analysis of EIS data.

关键词： Electrochemical impedance spectroscopy Random forest Corrosion Equivalent circuit model

来源：评论

学校读者我要写书评

暂无评论

Brain over Brawn: Using a Stereo Camera to Detect, Track, and Intercept a Faster UAV by Reconstructing the Intruder's Trajectory

Field Robotics

引用

Field robotics 2025年 2卷 222-240页

作者： Antonella Barišić Frano Petric Stjepan Bogdan Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Unska 3 Zagreb Croatia

This paper presents our approach to intercepting a faster intruder UAV, inspired by the MBZIRC 2020 Challenge 1. By utilizing a priori knowledge of the shape of the intruder's trajectory, we can calculate an interception point. Target tracking is based on image processing by a YOLOv3 Tiny convolutional neural network, combined with depth calculation using a gimbal-mounted ZED Mini stereo camera. We use RGB and depth data from the camera, devising a noise-reducing histogram-filter to extract the target's 3D position. Obtained 3D measurements of target's position are used to calculate the position, orientation, and size of a figure-eight shaped trajectory, which we approximate using a Bernoulli lemniscate. Once the approximation is deemed sufficiently precise, as measured by the distance between observations and estimate, we calculate an interception point to position the interceptor UAV directly on the intruder's path. Our method, which we have significantly improved based on the experience gathered during the MBZIRC competition, has been validated in simulation and through field experiments. Our results confirm that we have developed an efficient, visual-perception module that can extract information describing the intruder UAV's motion with precision sufficient to support interception planning. In a majority of our simulated encounters, we can track and intercept a target that moves 30% faster than the interceptor. Corresponding tests in an unstructured environment yielded 9 out of 12 successful results.

关键词： Autonomous aerial vehicles Trajectory Target tracking Cameras Three-dimensional displays Robots Radar tracking Image reconstruction Estimation Detectors

来源：评论

学校读者我要写书评

暂无评论

Autonomous, Mobile Manipulation in a Wall-Building Scenario: Team LARICS at MBZIRC 2020

Field Robotics

引用

Field robotics 2025年 2卷 201-221页

作者： Ivo Vatavuk Marsela Polic Ivan Hrabar Frano Petric Matko Orsag Stjepan Bogdan Laboratory for Robotics and Intelligent Control systems University of Zagreb Faculty of Electrical Engineering and Computing Unska 3 Zagreb Croatia

In this paper we present our hardware design and control approaches for a mobile manipulation platform used in Challenge 2 of the MBZIRC 2020 competition. In this challenge, a team of UAVs and a single UGV collaborate in an autonomous, wall-building scenario, motivated by construction automation and large-scale robotic 3D printing. The robots must be able, autonomously, to detect, manipulate, and transport bricks in an unstructured, outdoor environment. Our control approach is based on a state machine that dictates which controllers are active at each stage of the Challenge. In the first stage our UGV uses visual servoing and local controllers to approach the target object without considering its orientation. The second stage consists of detecting the object's global pose using OpenCV-based processing of RGB-D image and point-cloud data, and calculating an alignment goal within a global map. The map is built with Google Cartographer and is based on onboard LIDAR, IMU, and GPS data. Motion control in the second stage is realized using the ROS Move Base package with Time-Elastic Band trajectory optimization. Visual servo algorithms guide the vehicle in local object-approach movement and the arm in manipulating bricks. To ensure a stable grasp of the brick's magnetic patch, we developed a passively-compliant, electromagnetic gripper with tactile feedback. Our fully-autonomous UGV performed well in Challenge 2 and in post-competition evaluations of its brick pick-and-place algorithms.

关键词： Robots Robot kinematics Navigation Manipulators Cameras Buildings Grippers Automation Service robots Laser radar

来源：评论

学校读者我要写书评

暂无评论

Risk Assessment Based Time-adjusted Optimization for Safe and Fast Flight of Quadrotor UAVs

引用

IEEE Transactions on Vehicular Technology 2025年

作者： Zhu, Hai Li, Baoquan Yin, Haolin Zhang, Xuebo Tiangong University School of Control Science and Engineering The Tianjin Key Laboratory of Intelligent Control of Electrical Equipment Tianjin300387 China Nankai University Institute of Robotics and Automatic Information Systems The Tianjin Key Laboratory of Intelligent Robotics Tianjin300071 China

Generating an executable reference trajectory in realtime is a core of autonomous navigation for a quadrotor unmanned aerial vehicle (UAV). In the paper, a timeadjusted optimization method is proposed for UAV motion planning to achieve safe and fast flight. Firstly, based on parameterization for uniform B-spline trajectories, relationship of knot spans and UAV speeds is analyzed, and an iterative velocity restrict algorithm is introduced to tackle nonexecutable flight. Subsequently, combining start and target points in local planning, an evaluation criterion function is designed with control points of the above trajectory and directions of collision avoidance. On this basis, risk assessment is conducted according to surrounding environments, where four phases of passing obstacles is constructed by considering risk level variation. Then, the weight function in each phase is determined by relationship of obstacle and planned local trajectory. Moreover, time intervals of B-spline trajectories are adjusted to obtain nonuniform trajectories, so as to affect UAV speeds. Simulation and experiment are conducted with comparison to verify performance of the proposed method. © 2025 IEEE.

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

An Improved DeeplabV3+ Tile Image Positioning Method

An Improved DeeplabV3+ Tile Image Positioning Method

引用

2024 International Conference Optoelectronic Information and Optical Engineering, OIOE 2024

作者： Li, Xiaoyang Wang, Rui Tong, Xing Niu, Lianqiang Shenyang University of Technology Shenyang China Key Laboratory of Network Control Systems Chinese Academy of Sciences China Shenyang Institute of Automation Chinese Academy of Sciences China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (数字)9781510688209

ISBN: (纸本)9781510688193

In order to improve the detection accuracy and efficiency of surface defects on ceramic tiles, a detection model based on DeepLabV3+and combined with MobileNetv2 for feature extraction was constructed. Using ECA attention mechanism and multi branch receptive field cascade fusion structure to expand the sampling range of global and local element features for the empty space pyramid pooling module ASPP of the original model. Meanwhile, the model decoder uses depthwise separable convolutions instead of the original standard convolutions. Experimental results have shown that the improved model has an MPA value of 96.12%, a MIou value of 97.29%, an F1 value of 90.03%, and an Accuracy value of 99.89%. Compared with the previous model, the improved model's indicators have increased by 4.07%, 4.44%, 2.04%, and 1.02%, respectively. The segmentation accuracy and detection speed have been significantly improved. The experimental results fully demonstrate that the algorithm proposed in this article can effectively complete the task of detecting surface defects on ceramic tiles. © 2025 SPIE.

关键词： Image segmentation

来源：评论

学校读者我要写书评

暂无评论

High-order Fully Actuated System Approach based Attitude Stabilization for Underactuated Rigid and Flexible Spacecraft

引用

IEEE Transactions on Automation Science and Engineering 2025年 22卷 15094-15105页

作者： Jia, Shixiang Qiu, Jianbin Wang, Tong Harbin Institute of Technology State Key Laboratory of Robotics and Systems Harbin150001 China Harbin Institute of Technology Research Institute of Intelligent Control and Systems Harbin150080 China

This paper addresses the challenge of attitude stabilization for a class of underactuated rigid and flexible spacecrafts by utilizing only two control inputs. The attitude stabilization problem of underactuated spacecraft poses substantial challenges to the High-Order Fully Actuated (HOFA) system approach, due to the fact that it heavily depends on the full actuation characteristics of the system. To circumvent the aforementioned limitation, we first derive a HOFA system for underactuated rigid spacecraft using homogeneity theory and averaged system approach. Subsequently, we design a controller based on the HOFA system approach, which yields a linear closed-loop system. This methodology is then extended to address the simplified attitude stabilization problem of underactuated flexible spacecraft. By utilizing the HOFA system approach in tandem with an observer for estimating modal variables, we propose a control strategy that not only stabilizes the attitude but also actively suppresses elastic vibration. The performance of the proposed control schemes are demonstrated through simulation studies. © 2004-2012 IEEE.

关键词： Satellites

来源：评论

学校读者我要写书评

暂无评论

Development and Optimization of a WebGL-Based Mechanical Model Simulation Platform 4th

Development and Optimization of a WebGL-Based Mechanical Mod...

引用

4th International Conference on Mechanical Design and Simulation, MDS 2024

作者： Wang, Xintong Tian, Hao Fang, Jingzhe Zhang, Hualiang Zhang, Tao Software College Shenyang University of Technology Liaoning Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China School of Electrical Engineering Shenyang University of Technology Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9789819778867

The need for mechanical model simulation platforms is growing as a result of the ongoing advancements in digital technology and the mechanical manufacturing sector. The application scope and efficacy of simulation platforms are severely limited by the issue of sluggish rendering performance, which frequently arises when obtaining high-quality rendering. When drawing high demand mechanical models, a lot of processing power is frequently needed, which makes real-time rendering speed unsatisfactory for practical purposes. In order to achieve real-time rendering and simulation of 3D robots, this experiment built and implemented a WebGL-based 3D simulation platform. Additionally, the simulation platform can be optimized by increasing frame rate and rendering speed without sacrificing rendering effect by building a mixed bounding box. © The Author(s) 2025.

关键词： Digital elevation model

来源：评论

学校读者我要写书评

暂无评论

Electric Vehicle Routing Problem with Capacitated Charging Stations and Dynamic Electricity Prices

引用

IEEE Internet of Things Journal 2025年

作者： He, Zhiye Tian, Yuning Miao, Haoyu Yao, Canqi Yang, Zaiyue Shenzhen Key Laboratory of Control Theory and Intelligent Systems Guangdong Provincial Key Laboratory of Fully Actuated System Control Theory and Technology Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities School of System Design and Intelligent Manufacturing Shenzhen518055 China The Hong Kong Polytechnic University Department of Logistics and Maritime Studies Hong Kong Hong Kong

With rapid electrification of transportation systems in recent years, the electric vehicle routing problem (EVRP) has received increasing attention. In order to serve a set of valuable transportation tasks using a fleet of electric vehicles, EVRP intends to jointly determine their routes and the charging schedules, with the aim of optimizing service reward and charging cost under state of charge (SOC) constraints of battery. EVRP is a difficult nonlinear integer program, and due to its intrinsic NP-hardness early EVRP studies often oversimplify the charging process and assume unlimited capacity of charging stations and constant electricity price. The contribution of this paper lies in twofold. First, to better characterize the practical charging process, this paper introduces a new graph model that can take the charging station capacity and dynamic electricity price into full consideration. Second, we design a series of transformation techniques, including reformulation SOC dynamics, Lagrangian relaxation, exact linear programming relaxation, etc, which eventually convert the original EVRP into an approximate linear program. Extensive simulations across 14 instances demonstrate that, the proposed approach is capable of solving large-scale instances over 500 nodes, and is 100 times faster than traditional analytic methods while achieving very close optimality. While comparing with the popular heuristic method ALNS (Adaptive Large Neighborhood Search), our method is several times faster and obtains much better optimality. © 2014 IEEE.

关键词： Charging stations

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：