检索结果-内蒙古大学图书馆

2023 IEEE International Conference on robotics and Biomimetics, ROBIO 2023

作者： Chen, Ziqiang Yang, Ming Li, Feng Li, Wentao Li, Jinke Tian, Dingkui Sun, Jianquan He, Yong Wu, Xinyu Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen518005 China Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen518005 China University of Science and Technology of China Hefei230026 China China Construction Third Bureau First Engineering Mep Co. Ltd. Shenzhen518109 China

ISBN: (纸本)9798350325706

This paper presents a general estimation method of deformation for the self-balancing lower limb exoskeleton (SBLLE). In particular, we propose a Bi-LSTM deformation estimator (BLDE) to predict and compensate for the deformation of SBLLE based on the current force and torque data measured by force/torque (F/T) sensors. First, we choose four movements including squatting down and up, waist twisting, left foot lifting, and right foot lifting to mimic the constituent action of walking motion. The deformation data set is obtained through the motion capture analysis system and offline planning trajectories, and the relative F/T data set is obtained by the F/T sensors embedded in the feet of SBLLE. Second, the BiLSTM network is trained to learn the relationship between the deformation and F/T and verified on the test set. After that, BLDE is added to the control system of SBLLE to estimate and compensate for the deformation. Finally, four same movements and the walking experiment are conducted on the exoskeleton AutoLEE-G2 with BLDE. The experimental results have proven that BLDE can predict and compensate for deformation by only using F/T sensors. © 2023 IEEE.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Lateral Walking Gait Phase Detection with Data Optimization for a Hip Exoskeleton in Resistance Exercise

Lateral Walking Gait Phase Detection with Data Optimization ...

引用

IEEE Workshop on Advanced robotics and its Social Impacts, ARSO

作者： Wujing Cao Xinbo Zhu Rui Xu Changyu Li Hongliu Yu Mingming Zhang Haoyong Yu Worawarit Kobsiriphat Xinyu Wu Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen China SIAT Branch Shenzhen Institute of Artificial Intelligence and Robotics for Society and SIAT-CUHK Joint Laboratory of Robotics and Intelligent Systems. College of Automation Engineering Nanjing University of Aeronautics and Astronautics Jining Zhongke Intelligent Technology Co. Ltd. University of Shanghai for Science and Technology Southern University of Science and Technology Department of Biomedical Engineering National University of Singapore. National Metal and Materials Technology Center Thailand

ISBN: (数字)9798350344639

ISBN: (纸本)9798350344646

The accurate detection of lateral walking gait phases is essential for the effective implementation of hip exoskeleton systems in lateral resistance walking exercises. However, limitations in hardware, such as memory and computing power, in the microcontrollers of wearable devices, significantly impact the size and training speed of the lateral walking gait phase detection model, thus affecting the exoskeleton system. This study proposes a data optimization algorithm that utilizes K-means clustering combined with commonly used machine learning algorithms, including Random Forests (RF), Support Vector Machines (SVM), and k-Nearest Neighbors (KNN), to reduce both the training time and size of the model. With the implementation of this algorithm, the training time and model size of RF, SVM, and KNN-based models are reduced by 89.6%, 99.8%, and 97.9%, and 89.6%, 92.7%, and 95.2% respectively. The corresponding gait phase prediction accuracy experiences only a slight decrease of 1.6%, 1.7%, and 2.8% respectively. This method ensures a sufficiently high accuracy in detecting lateral walking gait phases while simultaneously achieving higher efficiency and a smaller model size.

关键词： Legged locomotion Training Support vector machines Solid modeling Machine learning algorithms Accuracy Exoskeletons

来源：评论

学校读者我要写书评

暂无评论

Exoskeleton-Based Lower Limb Rehabilitation Robot Design and Simulation for Children with Cerebral Palsy

Exoskeleton-Based Lower Limb Rehabilitation Robot Design and...

引用

World Rehabilitation Robot Convention (WRRC)

作者： Wujing Cao Shuo Zhang Yupeng Zou Xinqiang Guo Changyu Li Jingxin Wang Worawarit Kobsiriphat Xinyu Wu Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen China and SIAT-CUHK Joint Laboratory of Robotics and Intelligent Systems. SIAT Branch Shenzhen Institute of Artificial Intelligence and Robotics for Society School of Mechanical Engineering China University of Petroleum East China Jining Zhongke Intelligent Technology Co. Ltd. Department of Rehabilitation Medicine Zhengzhou Central Hospital Affiliated Zhengzhou University Zhengzhou China National Metal and Materials Technology Center Thailand

ISBN: (数字)9798350355123

ISBN: (纸本)9798350355130

Squat gait is the most common abnormal gait in children with cerebral palsy. Gait training with lower limb rehabilitation robots can improve rehabilitation efficiency and reduce manual labor for them. A novel exoskeleton-based lower limb rehabilitation robot for children with cerebral palsy is proposed, considering the squat gait characteristics of children with cerebral palsy. The structure of the lower limb rehabilitation robot, which combines hip and knee with 4 active degrees of freedom exoskeleton and mobile walker, is designed and optimized. Static analysis of the key mechanical structure of the exoskeleton is conducted using ANSYS Workbench, and local structures are optimized to ensure the safety factor of the mechanical structure is greater than 1, guaranteeing reasonable structural strength and stiffness design. Dynamic simulation analysis based on the ADAMS model validates the reliability and dynamic walking effect of the lower limb exoskeleton rehabilitation robot, obtaining the curve relationship between joint angles and motion cycles, thus verifying the effectiveness of the mechanical system motion.

关键词： Knee Training Cerebral palsy Exoskeletons Dynamics Static analysis Assistive robots Safety Finite element analysis Hip

来源：评论

学校读者我要写书评

暂无评论

Dynamic Human-Aware Task Planner for Human-Robot Collaboration in Industrial Scenario

Dynamic Human-Aware Task Planner for Human-Robot Collaborati...

引用

European Conference on Mobile Robots (ECMR)

作者： Alberto Gottardi Matteo Terreran Christoph Frommel Manfred Schoenheits Nicola Castaman Stefano Ghidoni Emanuele Menegatti Department of Information Engineering Intelligent Autonomous System Lab University of Padova Padua Italy IT+Robotics srl Vicenza Italy Deutsches Zentrum für Luft - und Raumfahrt e.V. (DLR) Augsburg Germany

The collaboration between humans and robots in industrial scenarios is one of the key challenges for Industry 4.0. In particular, industrial robots offer accuracy and efficiency, while humans have experience and the capability to manage complex situations. Combining these features can enhance the industrial process by avoiding the user manipulates heavy weights and allowing him to dedicate his efforts to tasks where flexibility, quality and experience make the difference in the final product. However, the collaboration between humans and robots raises several new problems to be addressed like safety, tasks scheduling and operator ergonomics. For example, human presence in the robot workspace introduces various elements of complexity into robot planning due to its dynamism and unpredictability. Planning must take into account how to coordinate the tasks between the robot and the human and be quick in re-planning to respond reactively to the operator's trigger. For this purpose, this work proposes a hierarchical Human-Aware Task Planner framework capable of generate a suitable plan to complete the process and manage user interrupts in order to have a constantly updated plan. The method is evaluated in a real industrial scenario and in a specific complex assembly task like the draping of carbon fiber plies.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Rehabilitation Training of Spinal Cord Injured Individuals by a Self-Balancing Exoskeleton Robot

Rehabilitation Training of Spinal Cord Injured Individuals b...

引用

IEEE International Conference on Real-time Computing and robotics (RCAR)

作者： Wentao Li Jinke Li Yong He Dingkui Tian Feng Li Jianquan Sun Xinyu Wu Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen China SIAT CUHK Joint Laboratory of Robotics and Intelligent Systems Shenzhen College of Advanced Technology University of Chinese Academy of Sciences Shenzhen China China Construction Third Bureau First Engineering MEP Co. Ltd. Shenzhen China

Physical therapy plays an important role in the rehabilitation for spinal cord injured individuals, and exoskeleton can assist with this process. In this paper, a self-balancing exoskeleton robot is introduced, which can provide assist not only in gait training, but also in balance training. In addition, it allows individuals walk with it without other assistive devices. This exoskeleton is designed to have a high degree of compatibility with humans. The structure and control system of the exoskeleton is introduced and the forward and inverse kinematic are solved, which enables the robot to perform various rehabilitation training actions as required. Experiments with a male subject have shown that this exoskeleton achieves the predicted results in gait training and balance training.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Self-supervised Multi-frame Monocular Depth Estimation with Pseudo-LiDAR Pose Enhancement

Self-supervised Multi-frame Monocular Depth Estimation with ...

引用

IEEE International Conference on robotics and Automation (ICRA)

作者： Wenhua Wu Guangming Wang Jiquan Zhong Hesheng Wang Zhe Liu MoE Key Lab of Artificial Intelligence AI Institute Shanghai Jiao Tong University Shanghai China Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Insititute of Medical Robotics Shanghai Jiao Tong University Shanghai China

Depth estimation is one of the most important tasks in scene understanding. In the existing joint self-supervised learning approaches of depth-pose estimation, depth estimation and pose estimation networks are independent of each other. They only use the adjacent image frames for pose estimation and lack the use of the estimated geometric information. To enhance the depth-pose association, we propose a monocular multi-frame unsupervised depth estimation framework, named PLPE-Depth. There are a depth estimation network and two pose estimation networks with image input and pseudo-LiDAR input. The main idea of our approach is to use the pseudo-LiDAR reconstructed from the depth map to estimate the pose of adjacent frames. We propose depth re-estimation with a better pose between the image pose and the pseudo-LiDAR pose to improve the accuracy of estimation. Besides, we improve the reconstruction loss and design a pseudo-LiDAR pose enhancement loss to facilitate the joint learning. Our approach enhances the use of the estimated depth information and strengthens the coupling between depth estimation and pose estimation. Experiments on the KITTI dataset show that our depth estimation achieves state-of-the-art performance at low resolution. Our source codes will be released on https://***/IRMVlabIPLPE-Depth.

关键词：

来源：评论

学校读者我要写书评

暂无评论

6DoF-ICTC: A Deep Image Feature Extraction Network Combining Transformers and CNNs for 6DoF Pose Estimation 12

6DoF-ICTC: A Deep Image Feature Extraction Network Combining...

引用

12th International Conference on CYBER Technology in Automation, Control, and intelligent systems, CYBER 2022

作者： Zhang, Liming Zhou, Xin Zhu, Baixian Wang, Can Wu, Xinyu Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institutes of Advanced Technology Chinese Academy of Sciences Shenzhen518055 China Cas Key Laboratory of Human-Machine Intelligence-Synergy Systems Shenzhen Institutes of Advanced Technology China University of Science and Technology of China China Department of Mechanical and Automation Engineering The Chinese University of Hong Kong Hong Kong

ISBN: (数字)9781665472678

ISBN: (纸本)9781665472678

In this work, we propose a new image feature extraction network for 6D pose estimation tasks. The majority of existing 6D pose estimation networks are based on the RGBD input, which is the fusion of images and point clouds. They are mainly working on keypoint extraction, point cloud feature extraction, and other tasks, however, image features, on the other hand, mainly rely on CNN networks that are currently advanced. With the development of Vision Transformer in the field of computer vision, the results on ImageNet demonstrate its benefit of extracting global features, and we see new directions that the Transformers can bring to the area of image feature extraction. ICTC is a Transformer paired with a CNN network that fuses the retrieved global features into each pixel and then does local feature extraction. This provides greater robustness to 6D pose estimation In complex situations such as shifting lighting conditions and object occlusion. Our method achieves 96% accuracy using the average ADD metric on the LineMOD dataset, demonstrating our method's effectiveness. © 2022 IEEE.

关键词： Feature extraction

来源：评论

学校读者我要写书评

暂无评论

A Real-time Framework for UAV Indoor Self-Positioning and 3D Mapping Base on 2D Lidar, Stereo Camera and IMU

A Real-time Framework for UAV Indoor Self-Positioning and 3D...

引用

IEEE International Conference on Real-time Computing and robotics (RCAR)

作者： Lebin Liang Haotian Rao Guohao Shen Can Wang Xinyu Wu Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen China University of Chinese Academy of Sciences Beijing China College of Electronic Engineering (College of Artificial Intelligence) South China Agricultural University Guangzhou China

This paper proposed a real-time Unmanned Aerial Vehicle (UAV) autonomous localization framework based on onboard sensors, including 2D Lidar, Stereo Camera and Inertial Measurement Unit (IMU), built on the open-source VINS-Fusion software to achieve real-time and drift-free UAV pose estimation. The proposed framework eliminates the motion distortion of Lidar during UAV motion by combining Visual-Inertial Odometry (VIO). It obtains global localization information of Lidar by PL-ICP algorithm based on a global point cloud map. Graph optimization method is used to fuse the local positional estimation and the global information from the Lidar, which eliminate the cumulative error caused by VIO. The feasibility of the method is verified by experiments and compared with the method of only running Visual-Inertial Navigation systems (VINS), the framework improves the accuracy of localization. In addition, we have implemented the construction of octree maps of 3D environments through the framework of this system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

When Shannon Meets Nonstochastic Information: Communication and Estimation

引用

IEEE Transactions on Automatic Control 2025年

作者： Zhang, Wentao Zuo, Zhiqiang Zhao, Rui Wang, Yijing Hu, Guoqiang Zhang, Hui Wang, Yaonan Hunan University School of Robotics Changsha410082 China Nanyang Technological University Continental-NTU Corporate Lab Singapore639798 Singapore Tianjin University Tianjin Key Laboratory of Intelligent Unmanned Swarm Technology and System School of Electrical and Information Engineering Tianjin300072 China Nanyang Technological University School of Electrical and Electronic Engineering Singapore639798 Singapore National Engineering Research Center for Robot Visual Perception and Control Changsha410082 China Hunan University College of Electrical and Information Engineering Changsha410082 China

This notes focuses on the issue of whether or not the state of a plant can be estimated when the inputs of communication channel involve noise and disturbance simultaneously. It turns out to calculate the maximum capacity of stationary memoryless multiple quasi-access channel under nonstochastic information theory. It is shown that the maximum information rate over such a channel is determined by a convex hull spanned by the zero-error capacities which are specified on the underlying sample spaces. Moreover, the state of a plant could be estimated provided that the maximal information rate is strictly greater than the topology entropy. © 1963-2012 IEEE.

关键词： Communication channels (information theory)

来源：评论

学校读者我要写书评

暂无评论

Design and simulation of a hip exoskeleton for lateral walking

Design and simulation of a hip exoskeleton for lateral walki...

引用

2021 IEEE International Conference on Real-Time Computing and robotics, RCAR 2021

作者： Zhang, Zhewen Cao, Wujing Chen, Chunjie Yu, Hongliu Wu, Xinyu Meng, Qiaoling Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Guangdong Provincial Key Lab of Robotics and Intelligent System University of Shanghai for Science and Technology Rehabilitation Engineering and Technology Institute CAS Key Laboratory of Human-Machine Intelligence-Synergy Systems Shenzhen Institute of Advanced Technology

ISBN: (纸本)9781665436786

In this article, a rehabilitation exoskeleton assisted by lateral walking is designed to help patients with lower limb movement disorders to solve the problem of lateral walking assistance, so as to achieve the effect of rehabilitation training. Based on the characteristics of lateral movement of human body, the exoskeleton designed in this paper uses linear push rod motor and thigh binding to assist hip abduction and adduction respectively. Based on the research of human transverse movement gait, a reasonable linkage mechanism was designed and kinematics simulation was carried out. The dynamics model of human lower limbs was established and calculated with MATlab simulation software. the moment of hip joint lateral movement is obtained. Finally, the structural parameters of the driving mechanism were analyzed by dynamic simulation, and the simulation results were compared with the target motion function to verify the rationality of the design. © 2021 IEEE.

关键词： MATlab

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：