检索结果-内蒙古大学图书馆

General Meeting of the IEEE-Power-and-Energy-Society (PES)

作者： Liu, W-H Edwin McArthur, Stephen Giri, Jay Miu, Karen Pratt, Rob Wen, Jun Uluski, Bob Dow, Luther Labut, Gerard IEEE Computing and Analytical Methods Subcommittee United States IEEE PES Intelligent Systems Subcommittee United States IEEE PES Multi-Agent System Working Group United States Power Systems Technology and Strategic Initiatives ALSTOM Grid Redmond WA United States Electrical and Computer Engineering Department Drexel University United States Pacific Northwest National Laboratory's (PNNL's) Smart Grid R and D Program U.S. Department of Energy United States Transmission and Interconnection Planning Group Southern California Edison (SCE) Company United States WECC Modeling and Validation Working Group United States EPRI Power Delivery and Utilization Area United States Distribution and West Coast Operations Quanta Technology United States Distribution Operations SmartCurrentssm Program Strategy DTE Energy Detroit MI United States

ISBN: (纸本)9781457710018

The effort of "Smart Grid" is to modernize grid infrastructure and build-in intelligence to power grids and delivery systems, and their interfaces to customer premises. However, the perspectives range from an emphasis on infrastructure to an emphasis on new paradigm-shifting applications. Alternatively, the smart grid can be thought of as the advanced information technologies that enable the desired analytical applications. As a general understanding, we believe that Smart Grid needs to integrate power system analysis, computing and economics to enhance grid reliability, efficiency, and security, and contributes to the climate change strategic goal. In this Supersession, the analytics that empowers smart grid applications is discussed;and the practical implementation and integration challenges will be presented.

关键词： smart grid analytical applications system integration

来源：评论

学校读者我要写书评

暂无评论

Comparison of voxel-based morphometry (VBM) and tractography of diffusion tensor MRI (DT-MRI) in temporal lobe epilepsy

Comparison of voxel-based morphometry (VBM) and tractography...

引用

2010 18th Iranian Conference on electrical engineering, ICEE 2010

作者： Afzali, Maryam Soltanian-Zadeh, Hamid Control and Intelligent Processing Center of Excellence School of Electrical and Computer Engineering University of Tehran Tehran 14395-515 Iran Image Analysis Laboratory Radiology Department Henry Ford Health System Detroit MI 48202 United States

ISBN: (纸本)9781424467600

Temporal lobe epilepsy (TLE) is a neurological disease that affects millions of individuals in the world. Majority of TLE patients suffer from refractory seizures. Determining abnormal/damaged regions of the brain that harbor seizure focus is a critical step towards treatment of TLE patients. Diffusion tensor imaging (DTI) is a non-invasive method that we use in this work to determine damaged regions of white matter in the brain. To this end, we apply two methods, voxel based morphometry (VBM) and fiber tracking. We use these methods along with two anisotropy maps (EAR and FA) extracted from the DTI data. We use DTI data of 31 subjects (12 normal subjects and 19 TLE patients) for testing and evaluation studies. The VBM method shows that TLE is associated with reduction of both of FA and EAR values in several regions within the temporal lobes. The tractography method shows abnormal diffusion characteristics in three fiber bundles (fornix, uncinate fasciculus, and cingulum). The results show that the EAR maps are less sensitive to noise than the FA maps and the EAR values change more than the FA values in TLE. ©2010 IEEE.

关键词： Diffusion tensor imaging

来源：评论

学校读者我要写书评

暂无评论

Spectral clustering approach with sparsifying technique for functional connectivity detection in the resting brain

Spectral clustering approach with sparsifying technique for ...

引用

2010 International Conference on intelligent and Advanced systems, ICIAS 2010

作者： Ramezani, Mahdi Heidari, Amin Fatemizadeh, Emad Soltanian-Zadeh, Hamid Biomedical Signal and Image Processing Laboratory Sharif University of Technology Tehran Iran Radiology Image Analysis Laboratory Henry Ford Health System Detroit MI 48202 United States Control and Intelligent Processing Center of Excellence Electrical and Computer Engineering Department University of Tehran Iran

ISBN: (纸本)9781424466238

The aim of this study is to assess the functional connectivity from resting state functional magnetic resonance imaging (fMRI) data. Spectral clustering algorithm was applied to the realistic and real fMRI data acquired from a resting healthy subject to find functionally connected brain regions. In order to make computation of the spectral decompositions of the entire brain volume feasible, the similarity matrix has been sparsified with the t-nearestneighbor approach. Realistic data were created to investigate the performance of the proposed algorithm and comparing it to the recently proposed spectral clustering algorithm with the Nystrom approximation and also with some well-known algorithms such as the Cross Correlation Analysis (CCA) and the spatial Independent Component Analysis (sICA). To enhance the performance of the methods, a variety of data pre and post processing steps, including data normalization, outlier removal, dimensionality reduction by using wavelet coefficients, estimation of number of clusters and optimal number of independent components (ICs). Results demonstrate the applicability of the proposed algorithm for functional connectivity analysis.

关键词： Brain

来源：评论

学校读者我要写书评

暂无评论

Editorial Special issue on approximate dynamic programming and reinforcement learning

引用

控制理论与应用（英文版） 2011年第3期 309-309页

作者： Silvia Ferrari Jagannathan Sarangapani Frank L. Lewis Laboratory for Intelligent Systems and Control(LISC)Department of Mechanical Engineering & Materials Science Box 90300 Duke University Durham NC 27708-0005 Department of Electrical & Computer Engineering University of Missouri-Rolla MO 65401 U.S.A. Automation and Robotics Research Institute The University of Texas at Arlington 7300 Jack Newell Blvd. S Ft. Worth Texas 76118-7115 U.S.A.

We are extremely pleased to present this special issue of the Journal of Control Theory and *** dynamic programming (ADP) is a general and effective approach for solving optimal control and estimation problems by adapting to uncertain environments over *** optimizes the sensing objectives accrued over a future time interval with respect to an adaptive control law,conditioned on prior knowledge of the system,its state,and uncertainties.A numerical search over the present value of the control minimizes a Hamilton-Jacobi-Bellman (HJB) equation providing a basis for real-time,approximate optimal control.

关键词： reinforcement learning dynamic programming optimal control effective approach prior knowledge Control Theory real-time control law problems special search future ADP basis

来源：评论

学校读者我要写书评

暂无评论

Performance evaluation of a PBIL-based power system damping controller

Performance evaluation of a PBIL-based power system damping ...

引用

Congress on Evolutionary Computation

作者： K. A. Folly G. K. Venayagamoorthy Department of Electrical Engineering University of cape Town South Africa Real-Time Power Intelligent System laboratory Department of Electrical and Computer Engineering Missouri University of Science and Technology Rolla MO USA

Recently Population-Based Incremental Learning (PBIL) algorithm has been applied to a range of problems in engineering with promising results. However, in most of the literature the standard PBIL with fixed learning rate has been used. It has been shown that when applied to dynamic environment as the one encountered in power systems, adaptive learning rate is more appropriate to use. In this paper, Population-Based Incremental Learning (PBIL) algorithm with adaptive learning rate is used to tune the parameters of a power system controller for damping power oscillations in a multi-machine power system. The optimization of controller's parameters has been performed over pre-specified range of system operating conditions. Robustness Evaluation of the proposed controller based on eigenvalue analysis and time domain simulation shows that the proposed controller is more robust than the conventional controller over the range of operating conditions considered.

关键词： Time domain analysis Analytical models Power generation Eigenvalues and eigenfunctions

来源：评论

学校读者我要写书评

暂无评论

Parameter identification of a linear permanent magnet motor using particle swarm optimization

Parameter identification of a linear permanent magnet motor ...

引用

7th Annual International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON 2010

作者： Therdbankerd, Tithiwat Sanposh, Peerayot Chayopitak, Nattapon Fujita, Hideaki Department of Electrical Engineering Intelligent Mechatronics Automation Robotics and Control Laboratory Kasetsart University 50 Phahonyothin Rd. Ladyao Jatujak Bangkok 10903 Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center 112 Thailand Science Park Phahonyothin Rd. Klong 1 Klong Luang Pathumthani 12120 Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology S3-18 2-12-1 Ookayama Meguro-ku Tokyo 152-8550 Japan

ISBN: (纸本)9789746724913

Accurate and effective parameter identification is an important engineering task in high performance control system design. One emerging approach to effectively identify such nonlinear or dynamic unknown parameters is to use Particle Swarm Optimization (PSO) algorithm. Linear Permanent Magnet (LPM) motor is a high performance actuator employed in many applications that require direct linear motion without mechanical transmission for high acceleration and accurate positioning. Therefore, accurate motor parameters are necessary to effectively control the LPM motors. This paper proposes a simple PSO based method with chirp inputs to identify the LPM motor's parameters. The simulations and experiments are conducted to verify the results and determine the effectiveness of the proposed method.

关键词： Parameter estimation

来源：评论

学校读者我要写书评

暂无评论

Friction feedforward compensation and position feedforward in CNC machines

Friction feedforward compensation and position feedforward i...

引用

7th Annual International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON 2010

作者： Suteeratanapirom, Wijin Rattanawaorahirankul, Rapeepong Laosapan, Chutima Sanposh, Peerayot Chayopitak, Nattapon Tungpimolrut, Kanokvate Kunieda, Hiroaki TAIST Tokyo Tech ICTES Program Department of Electrical Engineering Kasetsart University 50 Phahonyothin Rd. Ladyao Jatujak Bangkok 10903 Thailand Intelligent Mechatronics Automation Robotics and Control Laboratory Department of Electrical Engineering Kasetsart University 50 Phahonyothin Rd. Ladyao Jatujak Bangkok 10903 Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center 112 Thailand Science Park Phahonyothin Rd. Klong 1 Klong Luang Pathumthani 12120 Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology S3-65 2-12-1 Ookayama Meguro-ku Tokyo 152-8550 Japan

ISBN: (纸本)9789746724913

This research proposes a method to eliminate friction effect and reduced tracking error on CNC milling machines. A CNC milling machine has many connected mechanical components which have friction effects such as ball screws and rails. To control servo motors which are used to drive X-Y table in CNC milling machine, the conventional PID controller is widely used. In this research, Panasonic motor driver is set to the torque control mode. To compensate the friction effects, the friction feedforward compensation method is proposed. Moreover, to reduce the position tracking error, position feedforward controller is used. The simulation and implementation of position control in one axis of PID with Friction Feedforward Compensation and Position Feedforward Controller (FFC-PFC) are presented.

关键词： Friction

来源：评论

学校读者我要写书评

暂无评论

Parameter identification of a Linear Permanent Magnet motor using Particle Swarm Optimization

Parameter identification of a Linear Permanent Magnet motor ...

引用

International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON

作者： Tithiwat Therdbankerd Peerayot Sanposh Nattapon Chayopitak Hideaki Fujita Intelligent Mechatronics Automation Robotics and Control Laboratory Department of Electrical Engineering Kasetsart University Bangkok Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center Klong Luang Pathum Thani Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology Meguro Tokyo Japan

ISBN: (纸本)9781424456062;9789746724913

关键词： Parameter estimation Permanent magnet motors Particle swarm optimization Synchronous motors Signal processing robotics and automation Chirp intelligent robots Control systems Laboratories

来源：评论

学校读者我要写书评

暂无评论

Comparison of voxel-based morphometry (VBM) and tractography of diffusion tensor MRI (DT-MRI) in temporal lobe epilepsy

Comparison of voxel-based morphometry (VBM) and tractography...

引用

Iranian Conference on electrical engineering (ICEE)

作者： Maryam Afzali Hamid Soltanian-Zadeh Control and Intelligent Processing Center of Excellence School of Electrical and Computer Engineering University of Tehran Tehran Iran Image Analysis Laboratory Radiology Department Henry Ford Health System Detroit MI USA

ISBN: (纸本)9781424467600

关键词： Tensile stress Magnetic resonance imaging Diffusion tensor imaging Temporal lobe Epilepsy Ear Optical fiber testing Diseases Focusing Medical treatment

来源：评论

学校读者我要写书评

暂无评论

Friction feedforward compensation and position feedforward in CNC machines

Friction feedforward compensation and position feedforward i...

引用

International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON

作者： Wijin Suteeratanapirom Rapeepong Rattanawaorahirankul Chutima Laosapan Peerayot Sanposh Nattapon Chayopitak Kanokvate Tungpimolrut Hiroaki Kunieda TAIST Tokyo Technology China Intelligent Mechatronics Automation Robotics and Control Laboratory Department of Electrical Engineering Kasetsart University Bangkok Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center Klong Luang Pathum Thani Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology Meguro Tokyo Japan

ISBN: (纸本)9781424456062;9789746724913

关键词： Friction computer numerical control Metalworking machines Servomotors Three-term control Fasteners Rails Servomechanisms Torque control Error correction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：