检索结果-内蒙古大学图书馆

A practical PID variable stiffness control and its enhancement for compliant force-tracking interactions with unknown environments

引用

Science China(Technological Sciences) 2023年第10期66卷 2882-2896页

作者： ZHANG Xin ZHOU Hao LIU JinGuo JU ZhaoJie LENG YuQuan YANG ChenGuang State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China University of Chinese Academy of Sciences Beijing 100049China School of Computing University of PortsmouthPortsmouth PO13HEUK Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems Department of Mechanical and Energy EngineeringSouthern University of Science and TechnologyShenzhen 518055China Key Laboratory of Autonomous Systems and Networked Control College of Automation Science and EngineeringSouth China University of TechnologyGuangzhou 510640China

Compliant interaction control is a key technology for robots performing contact-rich manipulation *** design of the compliant controller needs to consider the robot hardware because complex control algorithms may not be compatible with the hardware performance,especially for some industrial robots with low bandwidth *** paper focuses on effective and easy-to-use compliant control algorithms for position/velocity-controlled *** by human arm stiffness adaptation behavior,a novel variable target stiffness(NVTS)admittance control strategy is proposed for adaptive force tracking,in which a proportional integral derivative(PID)variable stiffness law is designed to update the stiffness coefficient of the admittance function by the force and position ***,its stability and force-tracking capability are theoretically *** addition,an impact compensator(Impc)is integrated into the NVTS controller to enhance its disturbance-suppression capability when the robot is subjected to strong vibration disturbances in complicated surface polishing *** proposed controllers are validated through four groups of experimental tests using different robots and the corresponding results demonstrate that they have high-accuracy tracking capability and strong adaptability in unknown environments.

关键词： compliant interaction control force tracking PID variable stiffness impact compensator unknown environments

来源：评论

学校读者我要写书评

暂无评论

Resilient Event-Triggered Model Predictive control for Adaptive Cruise control Under Sensor Attacks

引用

IEEE/CAA Journal of Automatica Sinica 2023年第3期10卷 807-809页

作者： Zhijian Hu Rong Su Kai Zhang Zeyuan Xu Renjie Ma School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore 639798Singapore Key Laboratory of Ultra-Precision Intelligent Instrumentation Ministry of Industry and Information Technologyand the Center of Ultra-Precision Optoelectronic Instrument EngineeringHarbin Institute of TechnologyHarbin 150001China Department of Control Science and Engineering Harbin Institute of TechnologyHarbin 150001China Department of Chemical and Biomolecular Engineering National University of SingaporeSingapore 117585Singapore State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150001China IEEE

Dear Editor,This letter addresses the resilient model predictive control(MPC)problems for adaptive cruise control(ACC)systems under sensor *** the light of vulnerabilities of ACC systems to sensor attacks,an intrusion detection mechanism is proposed at the controller side to distinguish abnormal ***,the robust control gains are derived to design the terminal region constraint for MPC.

关键词： Trigger Event constraint

来源：评论

学校读者我要写书评

暂无评论

Artificial neural network-based direct power control to enhance the performance of a PMSG-wind energy conversion system under real wind speed and parameter uncertainties: An experimental validation

引用

Energy Reports 2024年 11卷 4356-4378页

作者： Majout, Btissam Bossoufi, Badre Karim, Mohammed Skruch, Pawel Mobayen, Saleh El Mourabit, Youness El Zair Laggoun, Zakaria Laboratory of Engineering Modelling and Systems Analysis SMBA University Fez Morocco Department of Automatic Control and Robotics AGH University of Krakow Poland Graduate School of Intelligent Data Science National Yunlin University of Science and Technology 123 University Road Section 3 Yunlin Douliou640301 Taiwan National School of Applied Sciences Abdelmalek Essaadi University Tetouan Morocco Laboratory of Electrotechnique Constantine Mentouri Brothers Constantine 1 University Constantine Algeria

With the increasing emphasis on embedding advanced technology into system controls, the Direct Power control (DPC) approach has garnered considerable attention due to its simple and highly adaptable algorithm. This approach has been increasingly recognized in numerous applications. However, the variable frequency, harmonic distortion of the currents, and power ripples caused by Hysteresis controllers and switching tables decrease its effectiveness and robustness, affecting the system's performance. For this reason, this paper proposed a new DPC based on Artificial Neural Network (ANN) approaches. In this approach, the hysteresis comparator and the switching table are substituted with ANN controllers and then applied on both sides: machine-side converter (MSC) and grid-side converter (GSC) of a Permanent Magnet Synchronous Generator based Wind Energy Conversion System (PMSG-WECS). Moreover, to make the system more efficient in varying wind conditions, this study expands the utilization of the artificial neural networks (ANN) to encompass the maximum power point tracking (MPPT) control strategy. To demonstrate the effectiveness of the proposed approach on the system behaviors, a simulation test was carried out in the Matlab/Simulink environment, using a real wind profile of a Moroccan city (Essaouira). In comparison to the classical DPC control, the simulation results showed the superior performance of the proposed ANN-DPC control in terms of reference tracking, response time, overshoot, precision, and its capacity to reduce the rate of power ripples and total harmonic distortion (THD) in the injected currents. Furthermore, a robustness test was also included in this work to check the robustness of the proposed control against parameters variation. In conclusion, the feasibility and effectiveness of the ANN-DPC control approach were confirmed through experimental validation using the dSPACE DS1104 board. © 2024 The Authors

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

Monocular Visual-Inertial and Robotic-Arm Calibration in a Unifying Framework

引用

IEEE/CAA Journal of Automatica Sinica 2022年第1期9卷 146-159页

作者： Yinlong Zhang Wei Liang Mingze Yuan Hongsheng He Jindong Tan Zhibo Pang Key Laboratory of Networked Control Systems Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016 State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016 Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China School of Computing Wichita State UniversityWichita 67260 USA Department of Mechanical Aerospace and Biomedical EngineeringUniversity of TennesseeTN 37996 USA Department of Automation Technology ABB Corporate Research SwedenVasteras 72178Sweden Department of Intelligent Systems Royal Institute of Technology(KTH)Stockholm 11428Sweden

Reliable and accurate calibration for camera,inertial measurement unit(IMU)and robot is a critical prerequisite for visual-inertial based robot pose estimation and surrounding environment ***,traditional calibrations suffer inaccuracy and *** address these problems,this paper proposes a monocular visual-inertial and robotic-arm calibration in a unifying *** our method,the spatial relationship is geometrically correlated between the sensing units and robotic *** decoupled estimations on rotation and translation could reduce the coupled errors during the ***,the robotic calibration moving trajectory has been designed in a spiral pattern that enables full excitations on 6 DOF motions repeatably and *** calibration has been evaluated on our developed *** the experiments,the calibration achieves the accuracy with rotation and translation RMSEs less than 0.7°and 0.01 m,*** comparisons with state-of-the-art results prove our calibration consistency,accuracy and effectiveness.

关键词： Calibration inertial measurement unit(IMU) monocular camera robotic arm spiral moving trajectory

来源：评论

学校读者我要写书评

暂无评论

Retinal disorder diagnosis based on hybrid deep learning models

引用

Multimedia Tools and Applications 2025年 1-25页

作者： Sedik, Ahmed El-Shafai, Walid El-Hag, Noha A. El-Banby, Ghada M. Abd El-Samie, Fathi E. Smart Systems Engineering Laboratory College of Engineering Prince Sultan University Riyadh11586 Saudi Arabia Department of the Robotics and Intelligent Machines Faculty of Artificial Intelligence Kafrelsheikh University Kafr el-Sheikh Egypt Computer Science Department Prince Sultan University Riyadh11586 Saudi Arabia Department of Electronics and Electrical Communications Engineering Faculty of Electronic Engineering Menoufia University Menouf32952 Egypt The Higher Institute of Commercial Sciences Algarbia Al Mahalla Al Kubra31951 Egypt Department of Industrial Electronics and Control Engineering Faculty of Electronic Engineering Menoufia University Menouf32952 Egypt Department of Information Technology College of Computer and Information Sciences Princess Nourah Bint Abdulrahman University P.O. Box 84428 Riyadh11671 Saudi Arabia

Anomaly detection from medical images is badly needed for automated diagnosis. For example, medical images obtained with several modalities, such as magnetic resonance (MR) and confocal microscopy, need to be classified for anomaly detection. The MR images may contain tumors that need to be detected with anomaly detection techniques. In MR imaging, brain tumors are represented as areas composed of abnormal cells that need to be detected. On the other hand, confocal microscopy can be used for retinal imaging. Hence, there is a need to apply classification techniques for diagnosing diseases of the eye, such as Diabetic Retinopathy (DR), which leads to exudates in different regions of the retina. The detection of exudates is necessary for the diagnosis of DR. In this paper, two models are presented for the classification of MR and retinal images. Much research has been done in this area, but it did not achieve high accuracy of classification in an acceptable time. In addition, the previous models did not consider both types of image modalities considered in this paper. The suggested models are Convolutional Neural Network (CNN) and Convolutional Long Short-Term Memory (Conv-LSTM). They are used to classify normal and abnormal cases of both brain tumor and DR diseases. The CNN model is composed of six convolutional layers and six max-pooling layers. A soft-max activation function takes the classification decision. The proposed Conv-LSTM model is composed of three stages: pre-processing, feature extraction, and classification. The deep learning model performance is better than those of traditional networks. The CNN gives an accuracy of 94.26% for DR classification and 95.8% for brain tumor classification, while the Conv-LSTM gives the maximum accuracy of 96.41% for DR classification and 97.4% for brain tumor classification. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025.

关键词： Confocal microscopy

来源：评论

学校读者我要写书评

暂无评论

Application of Deep Learning Method to Estimate Bottomhole Pressure Dynamics of Oil Wells 32

Application of Deep Learning Method to Estimate Bottomhole P...

引用

32nd IEEE International Symposium on Industrial Electronics, ISIE 2023

作者： Cheng, Haibo Li, Shichao Zeng, Peng Vyatkin, Valeriy State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China Luleå University of Technology Electrical and Space Engineering Department of Computer Science Luleå Sweden Aalto University Department of Electrical Engineering and Automation Helsinki Finland

ISBN: (纸本)9798350399714

Surrogate models, which have become an effective and popular method to close loop reservoir management problems, use a data-driven approach to predict dynamic injection and production wells parameters and optimize waterflooding development. In this study, a deep learning-based surrogate model method is proposed to estimate bottomhole pressure (BHP) of production wells in waterflooding reservoirs. Bidirectional long short-term memory (BiLSTM) network, as an efficient deep learning approach, is applied to BHP estimation using fluctuation data. Extended Fourier amplitude sensitivity test (EFAST) method is employed to analyse the influence of different input factors on BHP dynamics, and a reduced dataset is rebuilt to predict BHP parameter based on BiLSTM-EFAST algorithm. The estimation results are tested on a dataset from Volve oilfield in North Sea, and compared with other deep learning methods. The test results indicate that the proposed method can achieve higher prediction accuracy. A reduced dataset-based approach provides a new attempt to reduce model complexity and improve calculation speed for big data-driven surrogate model in oil and gas industry. © 2023 IEEE.

关键词： Long short-term memory

来源：评论

学校读者我要写书评

暂无评论

Towards Instance Segmentation-Based Litter Collection with Multi-Rotor Aerial Vehicle

Towards Instance Segmentation-Based Litter Collection with M...

引用

International Conference on Unmanned Aircraft systems (ICUAS)

作者： Filip Zoric Antonio Franchi Matko Orsag Zdenko Kovacic Chiara Gabellieri Laboratory for Robotics and Intelligent Control Systems (LARICS) at the Faculty of Electrical Engineering and Computing University of Zagreb Zagreb Croatia Robotics and Mechatronics Group from the University of Twente Department of Computer Control and Management Engineering Sapienza University of Rome Rome Italy

ISBN: (数字)9798350357882

ISBN: (纸本)9798350357899

This paper presents a novel aerial robotics application of instance segmentation-based floating litter collection with a multi-rotor aerial vehicle (MRAV). In the scope of the paper, we present a review of the available datasets for litter detection and segmentation. The reviewed datasets are used to train a Mask-RCNN neural network for instance segmentation. The neural network is off-board deployed on an edge computing device and used for litter position estimation. Based on the estimated litter position, we plan a path based on a quadratic Bezier curve for the litter pickup. We compare different trajectory generation methods for the object pickup. The system is verified in a laboratory environment. Eventually, we present practical considerations and improvements necessary to enable autonomous litter collection with MRAV.

关键词： Instance segmentation Reviews Neural networks Laboratories Estimation Trajectory Aircraft

来源：评论

学校读者我要写书评

暂无评论

High-precision Calibration of Camera and IMU on Manipulator for Bio-inspired Robotic System

引用

Journal of Bionic engineering 2022年第2期19卷 299-313页

作者： Yinlong Zhang Wei Liang Sichao Zhang Xudong Yuan Xiaofang Xia Jindong Tan Zhibo Pang State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016China Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China The School of Computer Science and Technology Xidian UniversityXi’an 710071China Department of Mechanical Aerospace and Biomedical EngineeringUniversity of TennesseeKonxville 37996USA Department of Automation Technology ABB Corporate Research Sweden72178 VästerasSweden

Inspired by box jellyfish that has distributed and complementary perceptive system,we seek to equip manipulator with a camera and an Inertial Measurement Unit(IMU)to perceive ego motion and surrounding unstructured *** robot perception,a reliable and high-precision calibration between camera,IMU and manipulator is a critical *** paper introduces a novel calibration ***,we seek to correlate the spatial relationship between the sensing units and manipulator in a joint ***,the manipulator moving trajectory is elaborately designed in a spiral pattern that enables full excitations on yaw-pitch-roll rotations and x-y-z translations in a repeatable and consistent *** calibration has been evaluated on our collected visual inertial-manipulator *** systematic comparisons and analysis indicate the consistency,precision and effectiveness of our proposed calibration method.

关键词： Bio-inspired robotic system Monocular camera IMU Manipulator Calibration

来源：评论

学校读者我要写书评

暂无评论

Deep Learning-Based Prediction of Subsurface Oil Reservoir Pressure Using Spatio-Temporal Data 49

Deep Learning-Based Prediction of Subsurface Oil Reservoir P...

引用

49th Annual Conference of the IEEE Industrial Electronics Society, IECON 2023

作者： Cheng, Haibo He, Yunpeng Zeng, Peng Li, Shichao Vyatkin, Valeriy Shenyang Institute of Automation Chinese Academy of Sciences State Key Laboratory of Robotics Shenyang China Chinese Academy of Sciences Key Laboratory of Networked Control Systems Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Luleå University of Technology Department of Computer Science Electrical and Space Engineering Luleå Sweden Aalto University Department of Electrical Engineering and Automation Helsinki Finland

ISBN: (纸本)9798350331820

Prediction of subsurface oil reservoir pressure are critical to hydrocarbon production. However, the accurate pressure estimation faces great challenges due to the complexity and uncertainty of reservoir. The underground seepage flow and petrophysical parameters (permeability and porosity) are important but difficult to measure in oilfield. Deep learning methods have been successfully used in reservoir engineering and oil & gas production process. In this study, the effective but inaccessible subsurface seepage fields are not used, only the spatial coordinates and temporal information are selected as model input to predict reservoir pressure. A stacked GRU-based deep learning model is proposed to map the relationship between spatio-temporal data and reservoir pressure. The proposed deep learning method is verified by using a three-dimensional reservoir model, and compared with commonly-used methods. The results show that the stacked GRU model has a better performance and higher accuracy than other deep learning or machine learning methods in pressure prediction. © 2023 IEEE.

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

Joint Moment Estimation for Hip Exoskeleton control: A Generalized Moment Feature Generation Method

arXiv

引用

arXiv 2024年

作者： Zhang, Yuanwen Xiong, Jingfeng Xian, Haolan Chen, Chuheng Chen, Xinxing Fu, Chenglong Leng, Yuquan Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics Department of Mechanical and Energy Engineering Southern University of Science and Technology Shenzhen China The Key Laboratory of Image Processing and Intelligent Control The Hubei Key Laboratory of Brain-inspired Intelligent Systems School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China

Hip joint moments during walking are the key foundation for hip exoskeleton assistance control. Most recent studies have shown estimating hip joint moments instantaneously offers a lot of advantages compared to generating assistive torque profiles based on gait estimation, such as simple sensor requirements and adaptability to variable walking speeds. However, existing joint moment estimation methods still suffer from a lack of personalization, leading to estimation accuracy degradation for new users. To address the challenges, this paper proposes a hip joint moment estimation method based on generalized moment features (GMF). A GMF generator is constructed to learn GMF of the joint moment which is invariant to individual variations while remaining decodable into joint moments through a dedicated decoder. Utilizing this well-featured representation, a GRU-based neural network is used to predict GMF with joint kinematics data, which can easily be acquired by hip exoskeleton encoders. The proposed estimation method achieves a root mean square error of 0.1180 ± 0.0021 Nm/kg under 28 walking speed conditions on a treadmill dataset, improved by 6.5% compared to the model without body parameter fusion, and by 8.3% for the conventional fusion model with body parameter. Furthermore, the proposed method was employed on a hip exoskeleton with only encoder sensors and achieved an average 20.5% metabolic reduction (p Copyright © 2024, The Authors. All rights reserved.

关键词： Exoskeleton (robotics)

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：