检索结果-内蒙古大学图书馆

IEEE International Conference on robotics and Automation (ICRA)

作者： R.R. Murphy A. Marzilli K. Hughes Center for Robotics and Intelligent Systems Colorado Schml of Mines Golden CO USA Mathematical Sciences Department Emory University Atlanta GA USA Electrical and Computer Engineering University of the Pacific Stockton Stockton CA USA

This paper investigates a range of strategies for determining when to explicitly replan paths. An computationally inexpensive event-driven method is presented which allows the robot to execute an a priori path reactively until a significant deviation in the path occurs, at which point the robot explicitly replans. The event-driven strategy is compared to replanning after every move, and replanning after every n moves on a mobile robot for a wide variety of influences, including different unmodeled obstacle configurations and densities, and quality of the a priori map. The paper concludes that, in general, planning as frequently as resources permits results in smoother actual paths and faster completions. However, if the updated map is inaccurate, the event-driven method is superior.

关键词： Mobile robots Path planning intelligent robots Navigation intelligent systems systems engineering and theory Strategic planning Testing Timing Fault detection

来源：评论

学校读者我要写书评

暂无评论

Neural Fault Detection and Accommodation for Interconnected Power systems

引用

IFAC Proceedings Volumes 1997年第18期30卷 943-947页

作者： Spyros Tzafestas Yiannis Anthopoulos Efthimios Kyriannakis Intelligent Robotics and Automation Laboratory Department of Electrical and Computer Engineering National Technical University of Athens Zographou 15773 Athens Greece. Tel: +30-1-7722489 +30-1-772-1527 Fax: +30-1-7722490 +30-1-7722459

Due to increasing safety and reliability demands fault detection and accommodation is a key issue in the design of industrial control systems. This paper presents a neural network based method for fault detection and accommodation, appropriate for interconnected power systems. The simulation results show that the method is very promising.

关键词： fault detection neural networks interconnected systems

来源：评论

学校读者我要写书评

暂无评论

Geometry-based part grouping for assembly planning

Geometry-based part grouping for assembly planning

引用

IEEE International Symposium on Assembly and Manufacturing (ISAM)

作者： H. Moradi K. Goldberg S. Lee Department of Computer Science-EE Systems Institute for Robotics and Intelligent Systems University of Southern California Los Angeles CA USA Department of Industrial Engineering and Operation Research University of California Berkeley USA Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA

One way to find an optimal plan is to enumerate all plans and evaluate a quality metric for each plan. However it is well known that N parts can have up to O(2/sup N/) assembly plans. Reducing N by grouping parts has been proposed earlier but to our knowledge has not been formally defined. In this paper we define two types of groups in terms of part geometry using the nondirectional blocking graph and binary adjacency matrices defined by Wilson and Latombe (1994). We give a polynomial time algorithm for identifying serial and parallel groups. We tested the algorithm on two planar assemblies where it reduced plan time by a factor of 4.

关键词： Robotic assembly Fasteners intelligent robots Transmission line matrix methods Testing Design automation Product design Design engineering Process planning Terminology

来源：评论

学校读者我要写书评

暂无评论

Neural networks based sensorial signal fusion: an application to material identification

Neural networks based sensorial signal fusion: an applicatio...

引用

International Conference on Digital Signal Processing (DSP)

作者： S.G. Tzaiestas Y. Anthopoulos Dept. of Electr. & Comput. Eng. Nat. Tech. Univ. of Athens Greece Intelligent Robotics and Automation Laboratory Department of Electrical and Computer Engineering National and Technical University of Athens Athens Greece

Data acquisition and learning capabilities are necessary for an intelligent system operating in unstructured, dynamically changing environments. For this purpose, a method for the effective use of multiple sensors must be developed. This paper shows how multisensor fusion can be accomplished by neural networks. It first summarizes the conventional fusion techniques and consequently describes the use of neural networks for sensor fusion as well as their advantages. Finally, an application is presented where a neural network is used to fuse the signals of several sensors, of different type, for material identification purposes.

关键词： Neural networks Signal processing Sensor fusion intelligent sensors Sensor phenomena and characterization Sensor systems intelligent systems intelligent robots Costs Recursive estimation

来源：评论

学校读者我要写书评

暂无评论

Geometric collision detection and potential field based time delay planning for dual arm systems

Geometric collision detection and potential field based time...

引用

IEEE International Conference on robotics and Automation (ICRA)

作者： Sukhan Lee H. Moradi G. Kardaras Sung-Kwon Kim Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA Department of Computer Science-EE Systems Institute for Robotics and Intelligent Systems University of Southern California Los Angeles CA USA Production Engineering Center Samsung Electronics Company Limited Suwan South Korea

In this paper a method for collision detection and collision avoidance for dual arm robots is proposed. The collision detection, a fast geometric approach based on link intersection, detects the collision and constructs the collision region for given trajectories. The time delay planning determines the minimum necessary time delay to avoid collisions using a potential field representation for collision regions. The planning is based on a flexible, massively parallel approach. It effectively avoids any local minima problems due to the potential field representation and can be used regardless of the complexity of the collision region (e.g., concave or complicated regions).

关键词： Delay effects Robotic assembly Manipulators Orbital robotics intelligent robots Parallel robots Parallel processing Assembly systems robotics and automation Path planning

来源：评论

学校读者我要写书评

暂无评论

The active kinematic histogram method for path planning of non-point, non-holonomically constrainted mobile robots

引用

Advanced robotics 1997年第4期12卷 373-395页

作者： Katevas, Nikos I. Tzafestas, Spyros G. Zenon SA - Industrial Automation Athens 15344 Kanari 5 Greece Intelligent Robotics and Automation Laboratory Department of Electrical and Computer Engineering National Technical University of Athens Athens 15773 Zografou Campus Greece

The paper presents a novel path planning method for non-point, non-holonomically constrainted mobile robots. The proposed method, named the Active Kinematic Histogram (AKH) method, is a potential field path-planning method based on the Vector Field Histogram (VFH) method introducedby J. Borenstein and Y. Koren. The method relies on one-dimensional environment representations named AKHs, derived from the available information on the obstacle space and the robot itself. The AKHs provide the information abstraction required for fast, collision-free and kinematically feasiblepath planning for non-point, non-holonomically constrainted mobile robots. The method constructs two AKH structures incorporating the information stored in occupancy grid environment representations as well as the exact robot's size, shape and kinematic features. The method applies simpleand fast procedures, e.g. histogram shifting, in order to determine kinematic feasibility and the result of the robot's steering limits. Being a potential field method, the AKH method uses adaptive thresholding procedures to reduce the inherited drawback of the local minima traps ***, the method proposes specific updating and coding procedures for the environmental information and introduces the Ageing function to insert time parameterization in the path-planning results. Also, the so-called bicycle kinematic model is presented in order to describe the kinematicfamily of mobile robots suitable for applying the AKH method. The method integrates a velocity control procedure which is also based on information provided by the active kinematic histograms. The method produced smooth, collision-free paths in a variety of experimental configurations. Simulationand experimental results are presented. © VSP and robotics Society of Japan 1997.

关键词：

来源：评论

学校读者我要写书评

暂无评论

The HIMAC Project: Hierarchical Management and Control in Manufacturing systems

引用

IFAC Proceedings Volumes 1997年第1期30卷 309-314页

作者： E. Canuto M. Christodoulou c. Chu F. Donati V. Gaganis B. janusz J.M. Proth W. Reithofer M. Vallauri Dipartimento di Automatica e Informatica. Politecnico di Torino. Corso Duca degli Abruzzi 24 1-10129 Torino. Italy Dept. of Electrical & Computer Engineering. Laboratory of Automation Technical University of Crete. GR-73100 Chania (Crete). Greece INRIA Lorraine Technopôle Metz 2000. Rue Marconi 4. F-57070 Metz. France Institute for Real-time Computer Systems and Robotics. University of Karlsruhe Kaiserstrasse 12 D-76128 Karlsruhe. Germany

The paper presents the major features of the ESPRIT Basic Research HIMAC, proposed to the EC after a thorough investigation of the state of the art of manufacturing systems control. HIMAC has followed a new approach, by developing a specific mathematIcs, the Manufactunng Algebra (MA), for modelling and controlling the production processes of discrete manufacturing systems. As a key feature, the MA models can be bottom-up aggregated starting from the very detailed levels used in simulation, thus making poSSIble a coherent model hierarchy at the base of the design and realization of Hierarchical control strategies and architectures. The formulation of the original mathematical approach and its validation criteria are outlined in the paper. For a deeper understanding, the mterested reader can take advantage of the list of references given at the end.

关键词： Manufacturing systems Production control Hierarchical control

来源：评论

学校读者我要写书评

暂无评论

Data fusion: Color edge detection and surface reconstruction through regularization

引用

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS 1996年第3期43卷 355-363页

作者： Salinas, RA Richardson, C Abidi, MA Gonzalez, RC Imaging Robotics and Intelligent Systems Laboratory Department of Electrical Engineering University of Tennessee Knoxville TN USA Imaging Robotics and Intelligent Systems LaboratoryDepartment of Electrical Engineering University of Tennessee Knoxville TN USA

Data fusion provides tools for solving problems which are characterized by distributed and diverse information sources. In this paper rye focus on the problem of extracting features such as image discontinuities from both synthetic and real images. Since edge detection and surface reconstruction are ill-posed problems in the sense of Hadamard, Tikhonov's regularization paradigm is proposed as the basic tool for solving this inversion problem and restoring well-posedness. The proposed framework includes 1) a systematic view of one- and two-dimensional regularization, 2) extension of the standard Tikhonov regularization method by allowing space-variant regularization parameters, and 3) further extension of the regularization paradigm by adding multiple data sources to allow for data fusion. The theoretical approach is complemented by developing a series of algorithms, then solving the early vision problems of color edge detection and surface reconstruction, An evaluation of these methods reveals that this new analytical data fusion technique output is consistently better than each of the individual RGB edge maps, and noisy corrupted images are reconstructed into smooth noiseless surfaces.

关键词： Image edge detection Surface reconstruction Image reconstruction intelligent robots Data mining Data analysis intelligent sensors intelligent systems Entropy Brightness

来源：评论

学校读者我要写书评

暂无评论

Internal force-based impedance control for cooperating manipulators

引用

IEEE TRANSACTIONS ON robotics AND AUTOMATION 1996年第1期12卷 78-89页

作者： Bonitz, RG Hsia, TC Systems Controland Robotics LaboratoryDepartment of Electrical and Computer Engineering University of California Davis CA USA

An internal force-based impedance control scheme for cooperating manipulators is introduced which controls the motion of the objects being manipulated and the internal force on the objects. The controller enforces a relationship between the velocity of each manipulator and the internal force on the manipulated objects. Each manipulator is directly given the properties of an impedance by the controller;thus, eliminating the gain limitation inherent in the structure of previously proposed schemes. The controller uses the forces sensed at the robot end effecters to compensate for the effects of the objects' dynamics and to compute the internal force using only kinematic relationships. Thus, knowledge of the objects' dynamics is not required. Stability of the system is proven using Lyapunov theory and simulation results are presented validating the proposed concepts. The effect of computational delays in digital control implementations is analyzed vis-a-vis stability and a lower bound derived on the size of the desired manipulator inertia relative to the actual manipulator endpoint inertia. The bound is independent of the sample time.

关键词： Impedance Force control Motion control Manipulator dynamics Velocity control Robot sensing systems End effectors Kinematics Stability Computational modeling

来源：评论

学校读者我要写书评

暂无评论

3D free-form surface registration and object recognition

引用

INTERNATIONAL JOURNAL OF computer VISION 1996年第1期17卷 77-99页

作者： Chua, CS Jarvis, R Intelligent Robotics Research Center Department of Electrical and Computer Systems Engineering Monash University Wellington Road 3168 Clayton Vic Australia

A new technique to recognise 3D free-form objects via registration is proposed. This technique attempts to register a free-form surface, represented by a set of 2 1/2D sensed data points, to the model surface, represented by another set of 2 1/2D model data points, without prior knowledge of correspondence or vie;tv points between the two point sets. With an initial assumption that the sensed surface be part of a more complete model surface, the algorithm begins by selecting three dispersed, reliable points on the sensed surface. To find the three corresponding model points, the method uses the principal curvatures and the Darboux frames to restrict the search over the model space. Invariably, many possible model 3-tuples will be found. For each hypothesized model 3-tuple, the transformation to match the sensed 3-tuple to the model 3 tuple can be determined. A heuristic search is proposed to single out the optimal transformation in low order time. For realistic object recognition or registration, where the two range images are often extracted from different view points of the model, the earlier assumption that the sensed surface be part of a more complete model surface cannot be relied on. With this, the sensed 3-tuple must be chosen such that the three sensed points lie on the common region visible to both the sensed and model views. We propose an algorithm to select a minimal non-redundant set of 3-tuples such that at least one of the S-tuples will lie on the overlap. Applying the previous algorithm to each 3-tuple within this set, the optimal transformation can be determined. Experiments using data obtained from a range finder have indicated fast registration for relatively complex test cases. If the optimal registrations between the sensed data (candidate) and each of a set of model data are found, then, for 3D object recognition purposes, the minimal best fit error can be used as the decision rule.

关键词： computer vision

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：