检索结果-内蒙古大学图书馆

Effect of Particle Orientation on Heat Transfer in Arrays of Prolate Particles

Computer Modeling in engineering & Sciences 2023年第8期136卷 1509-1526页

作者： Romana Basit Xinyang Li Zheqing Huang Qiang Zhou School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’anChina State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’anChina

Direct Numerical Simulations have been carried out to study the forced convection heat transfer of flow through fixed prolate particles for a variety of aspect ratios ar={5/4,5/3,5/1}with Reynolds number(Re)up to *** variations of the solid volume fraction c={0.1,0.2,0.3}with four Hermans orientation factors S={−0.5,0,0.5,1}are *** has been found that changes in S cause prominent variations in the Nusselt *** general,Nusselt number increases with the decrease of *** all three aspect ratios,the Nusselt number remains a linear function of S at different c and ***,it is concluded that,for heat transfer from prolate muti-particle system,the effects of orientations cannot be ignored.A new correlation for Nusselt number has been developed for arrays of prolate particles using the simulation data as a function of Re,c,S and ar.

关键词： Direct Numerical Simulation heat transfer lattice Boltzmann method particle orientations prolate particles

来源：评论

学校读者我要写书评

暂无评论

Resource utilization of solid waste carbide slag:a brief review of application technologies in various scenes

引用

Waste Disposal and Sustainable Energy 2022年第1期4卷 1-16页

作者： Hongxia Wang Wanyi Xu Maimoona Sharif Guangxu Cheng Zaoxiao Zhang State Key Laboratory of Multiphase Flow in Power Engineering School of Chemical Engineering and TechnologyXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

China is the largest producer and consumer of calcium carbide in the *** calcium carbide industry is an indispensable industry to support the basic life of *** huge production capacity of calcium carbide is accompanied by a large number of solid waste carbide *** to the immature treatment technology of carbide slag,a large number of carbide slag are stacked on-site,resulting in land occupation,air-drying,easy take-off ash,and pollution of the environment and water *** China,calcium carbide is mainly used to produce acetylene and further utilized,80%of which is used to produce polyvinyl chloride(PVC).A large amount of carbide slag is not used,while only a small part is used in the traditional building materials industry,flue gas desulfurization,sewage treatment,etc.,however,the economic benefits are ***,converting the solid waste carbide slag produced by the calcium carbide industry into high value-added CaCO3,CaCl2,CaSO4 whiskers,*** become a potential way to expand the development field of the calcium carbide industry and is environmentally *** paper focuses on summarizing the traditional and emerging high value-added utiliza-tion technologies of carbide slag,and then introduces the application research of carbide slag in carbon emission ***,the defects of these technologies are summarized and further research directions are *** study provides basic guidance for the diversified development of efficient resource utilization of carbide *** abstract Diversified development of calcium carbide industry,resource utilization of solid waste carbide slag and its application of carbon emission reduction have been fully reviewed.

关键词： Calcium carbide Carbide slag Application research High added value Carbon emission reduction

来源：评论

学校读者我要写书评

暂无评论

Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM

引用

Particuology 2023年第2期73卷 47-58页

作者： Tianning Zhang Zhen Wan Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering(SKLMFPE) Xi'an Jiaotong UniversityXi'an710049ShaanxiChina Xi'an Electronic Engineering Research Institute Xi'an710100ShaanxiChina

Supercritical water fluidized bed(SCWFB)is a promising reactor to gasify biomass or *** optimization design is closely related to wall-to-bed heat transfer,where particle convective heat transfer plays an important *** paper evaluates the particle convective heat transfer coefficient(h_(pc))at the wall in SCWFB using the single particle *** critical parameters in the single particle model which is difficult to get experimentally are obtained by the computational fluid dynamics-discrete element method(CFD-DEM).The contact statistics related to particle-to-wall heat transfer,such as contact number and contact distance,are also *** results show that particle residence time(τ),as the key parameter to evaluate h_(pc),is found to decrease with rising velocity,while increase with larger thermal boundary layer thickness.τfollows a gamma function initially adopted in the gas-solid fluidized bed,making it possible to evaluate h_(pc) in SCWFB by a simplified single particle *** theoretical predicted h_(pc) tends to increase with rising thermal gradient thickness at a lower velocity(1.5 U_(mf)),while first decreases and then increases at higher velocity(1.75 and 2 U_(mf)).h_(pc) occupies 30%-57%of the overall wall-to-bed heat transfer coefficient for a particle diameter of 0.25 *** results are helpful to predict the overall wall-to-bed heat transfer coefficient in SCWFB combined with a reasonable fluid convective heat transfer model from a theoretical perspective.

关键词： Supercritical water Fluidized bed Particle residence time Discrete element method Single particle model

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of strongly swirling turbulent flows in a liquid-liquid hydrocyclone using the Reynolds stress transport equation model

引用

Science China(Technological Sciences) 2000年第1期43卷 86-96页

作者：陆耀军周力行沈熊 State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Department of Engineering Mechanics Tsinghua University Beijing 100084 China

The Reynolds stress transport equation model (DSM) is used to predict the strongly swirling turbulent flows in a liquid-liquid hydrocyclone, and the predictions are compared with LDV measurements . Predictions properly give the flow behavior observed in experiments, such as the Rankine-vortex structure and double peaks near the inlet region in tangential velocity profile, the downward flow near the wall and upward flow near the core in axial velocity profiles. In the inlet or upstream region of the hydrocyclone, the reverse flow near the axis is well predicted, but in the region with smaller cone angle and cylindrical section, there are some discrepancies between the model predictions and the LDV measurements. Predictions show that the pressure is small in the near-axis region and increases to the maximum near the wall. Both predictions and measurements indicate that the turbulence in hydrocy-clones is inhomogeneous and anisotropic.

关键词： strongly swirling flows numerical simulation hydrocyclone

来源：评论

学校读者我要写书评

暂无评论

Error Analysis of Liquid Holdup Measurement in Gas-Liquid Annular flow Through Circular Pipes Using High-Speed Camera Method

引用

Journal of Shanghai Jiaotong university(Science) 2018年第S1期23卷 34-40页

作者： LIU Li BAI Bofeng School of Nuclear Science and Engineering Shanghai Jiao Tong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Accurate measurement of gas-liquid phase fraction is essential for the proper modelling of the pressure drop, heat transfer coefficient, mass transfer rate and interfacial area in two-phase flows. In this paper, taking the issue of optical distortion into account, an analytical model was proposed to estimate and correct the liquid holdup in gas-liquid annular flow through a circular pipe using high-speed camera method. The error in the liquid holdup measurement generated from different refractive indices among transparent circular pipe, liquid film and air core was firstly theoretically analyzed based on the geometric optics. Experimental tests were then carried out to identify the difference as well as to validate the proposed model. Results indicated that the prediction of the liquid holdup has a good performance with the experimental data(i.e., mean relative error is 4.1%) and the measured liquid holdup is larger than the real one. It was found that the measured liquid holdup is larger than the real one. Generally, when the real liquid holdup gets smaller, the discrepancy between the measured liquid holdup by image and the real liquid holdup becomes more significant. Thus, after measuring the liquid holdup from the images, the value of the measured liquid holdup must be corrected by the present model in order to obtain the real liquid holdup.

关键词： gas-liquid annular flow liquid holdup optical refraction analytical correction

来源：评论

学校读者我要写书评

暂无评论

A volume of fluid simulation of the steady deformation and the drag of a single droplet in a flowing gas

引用

Journal of Hydrodynamics 2021年第2期33卷 334-346页

作者： Zhi-bin Wang Zhong-wei Yang Lie-jin Guo Ren-jie Zhao State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChendu 610500China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

A method is proposed to investigate the steady deformation and the drag of a single droplet in a flowing gas at a high Reynolds *** volume of fluid(VOF)method is used to model the droplet surface *** direct numerical simulation(DNS)method is used to model the gas flow *** order to avoid the effect of the droplet acceleration on the drag and reduce the computation cost,a body force is added to the droplet to make it fixed at a constant *** body force is determined by using the Newton iteration *** simulated droplet aspect ratio and the drag coefficient agree well with the published experimental ***,the sources of the drag are analyzed and the effect of the Reynolds number and the Weber numbers on the droplet deformation and the drag are *** drag mainly comes from the pressure difference between the droplet-leading zone and the trailing zone,and the turbulence wake would increase the drag.

关键词： Droplet deformation steady drag volume of fluid(VOF) turbulent flow drag force

来源：评论

学校读者我要写书评

暂无评论

Cobalt oxide and carbon modified hematite nanorod arrays for improved photoelectrochemical water splitting

引用

Chinese Chemical Letters 2017年第12期28卷 2207-2211页

作者： Miao Wang Meng Wang Yanming Fu Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi'an fiaotong UniversityXi'on 710049China

Given the proper band gap, low cost and good stability, hematite （α-Fe2O3） has been considered as a promising candidate for photoelectrochemical （PEC） water splitting, however suffers from the sluggish surface water oxidation reaction kinetics. In this study, a simple dip-coating process was used to modify the surface of α-Fe2O3 nanorod arrays with cobalt oxide （COOx） and carbon （C） for the improved PEC performance, with a photocurrent density at 1.6V （vs. reversible hydrogen electrode, RHE） increased from 0.10 mA/cm2 for the pristine α-Fe2O3 to 0.37 mA/cm2 for the CoOx/C modified α-Fe2O3 nanorods. As revealed by electrochemical analysis, thanks to the synergistic effect of CoOx and C, the PEC enhancement could be attributed to the enhanced charge transfer ability, decreased surface charge recombination, and accelerated water oxidation reaction kinetics. This study serves as a good example for improving PEC water splitting performance via a simple method.

关键词： Hematite nanorodsSurface modificationPhotoelectrochemical water splittingWater oxidationElectrochemical impedance spectroscopy

来源：评论

学校读者我要写书评

暂无评论

An investigation into the heat transfer characteristics of spiral wall with internal rib in a supercritical sliding-pressure operation once-through boiler

引用

中国高等学校学术文摘·能源与动力工程 2007年第3期1卷 300-304页

作者： TANG Renhu YIN Fei WANG Haijun CHEN Tingkuan The State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

Within the pressure range of 9-28 MPa,mass 200-500 kW/m2,experiments were performed to investigate the heat transfer to water in the inclined upward internally ribbed tube with an inclined angle of 19.5 degrees,a maximum outer diameter of 38.1 mm,and a thickness of 7.5 *** on the experiments,it was found that heat transfer enhancement of the internally ribbed tube could postpone departure from nucleate boiling at the sub-critical ***,the heat transfer enhancement decreased near the critical *** supercritical pressure,the temperature difference between the wall and the fluid increased near the pseudo-critical temperature,but the increase of wall temperature was less than that of departure from nucleate boiling at sub-critical *** pressure is closer to the critical pressure,the temperature difference between the wall and the fluid increased greatly near the pseudo-critical *** transfer to supercritical water in the inclined upward internally ribbed tube was enhanced or deteriorated near the pseudo-critical temperature with the variety of ratio between the mass velocity and the heat *** the rotational flow of the internal groove reduced the effect of natural convection,the internal wall temperature of internally ribbed tube uniformly distributed along the *** maximum internal wall temperature difference of the tube along the circumference was only 10 degrees when the fluid enthalpy exceeded 2 000 J/*** the effect of acute variety of the fluid property on heat transfer,the correlation of heat transfer coefficient on the top of the internally ribbed tube was orovided.

关键词： thermal power engineering heat transfer supercritical pressure boiler internally ribbed tube departure from nucleate boiling

来源：评论

学校读者我要写书评

暂无评论

Simulation of horizontal slug-flow pneumatic conveying with kinetic theory

引用

中国高等学校学术文摘·能源与动力工程 2007年第3期1卷 336-340页

作者： GU Zhengmeng GUO Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

Wavelike slug-flow is a representative flow type in horizontal pneumatic *** theory was introduced to establish a 3D kinetic numerical model for wavelike slug gas-solid flow in this *** motion of particulate slugs in horizontal pipes was numerically *** formation and motion process of slugs and settled layer were *** characteristics of the flow,such as pressure drop,air velocity distribution,slug length and settled layer thickness,and the detailed changing characteristics of slug length and settled layer thickness with air velocity were *** results indicate that kinetic theory can represent the physical characteristics of the non-suspension dense phase flow of wavelike slug pneumatic *** experiment in this paper introduced a new idea for the numerical calculation of slug-flow pneumatic conveying.

关键词： slug-flow pneumatic conveying kinetic theory simulation

来源：评论

学校读者我要写书评

暂无评论

Best estimate plus uncertainty analysis of the China advanced large-scale PWR during LBLOCA scenarios

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2020年 2卷 34-42页

作者： Chang, Yuhao Wang, Mingjun Zhang, Jing Tian, Wenxi Qiu, Suizheng Su, G.H. Department of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

China advanced large-scale Pressurized Water Reactor (PWR) implements series of passive safety systems to provide core cooling and decay heat removal in case of some unexpected accidents. The development of reactor best estimate system analysis codes has realized the transition from conservative safety analysis to Best Estimate plus Uncertainty (BEPU) analysis for the purpose of achieving more realistic results and digging larger safety margins. The BEPU analysis during Large Break Loss of Coolant Accident (LBLOCA) has been widely used for the licensing application of Nuclear power Plants (NPPs). In this paper, the BEPU analysis of China advanced large-scale PWR was performed under the conditions of LBLOCA scenarios employing RELAP5 code. The models of reactor coolant system with all the passive safety systems were established and the influence of uncertainties of important parameters on the Peak Cladding Temperature (PCT) was evaluated. The results show the obtained PTC (1314 K) through the BEPU analysis is far below the 10CFR50.46 PCT acceptance criteria (1477 K) in case of LBLOCA and is also lower than the conservative calculation value (1348 K), indicating a larger safety margin. This work provides a meaningful evaluation method for China advanced large-scale PWR safety assessment. © 2020 Xi'an Jiaotong University

关键词： Pressurized water reactors

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：