检索结果-内蒙古大学图书馆

作者： Zhang, Jiaxiang Wei, Liangjie Man, Xingjia Jiang, Xue Zhang, Yingjia Hu, Erjiang Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

Ignition delay times of n-butanol/oxygen diluted with argon were measured behind reflected shock waves. Experiments were carried out in the temperature range 1200-1650 K, at 2 and 10 atm, and at equivalence ratios of 0.5, 1.0, and 2.0. Correlations of ignition delay times were constructed on the basis of measured data through multiple linear regression. A modified kinetic model for the oxidation of n-butanol at high temperature was developed, based on previous models by adding and modifying some key reactions. The modified model shows good prediction of the measured data under all measured conditions. This model was also validated against jet-stirred reactor (JSR) data obtained from the literature, and fairly good agreement was observed. A fair improvement on the simulation of aldehydes (acetaldehyde and butyraldehyde) was found compared to the original model. Finally, reaction pathway and sensitivity analysis indicate that the H-abstraction reactions play a dominant role in the consumption of n-butanol, while unimolecular decomposition reactions become more important with increasing temperature. High-level accurate investigation of the rate constants of H-abstraction reactions and unimolecular decomposition reactions is required to further improve n-butanol oxidation kinetics. © 2012 American Chemical Society.

关键词： Oxidation

来源：评论

学校读者我要写书评

暂无评论

Surface sulfurization activating hematite nanorods for efficient photoelectrochemical water splitting

引用

Science Bulletin 2019年第17期64卷 1262-1271页

作者： Lianlian Mao Yu-Cheng Huang Yanming Fu Chung-Li Dong Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Department of Physics Tamkang University Tamsui 25137 Taiwan China

Surface treatment is an effective method to improve the photoelectrochemical(PEC) performance of photoelectrodes. Herein, we introduced a novel strategy of surface sulfurization to modify hematite(a-Fe2 O3)nanorods grown in an aqueous solution, which triggered encouraging improvement in PEC *** comparison to the solution-grown pristine a-Fe2 O3 nanorod photoanode that is PEC inefficient and always needs high temperature(>600 °C) activation, the surface sulfurized a-Fe2 O3 nanorods show photocurrent density increased by orders of magnitude, reaching 0.46 mA cmà2 at 1.23 V vs. RHE(reversible hydrogen electrode) under simulated solar illumination. This improvement in PEC performances should be attributed to the synergy of the increased carrier density, the reduced surface charge carrier recombination and the accelerated water oxidation kinetics at the a-Fe2 O3/electrolyte interface, as induced by the incorporation of S ions and the formation of multi-state S species(Fe-Sx-Oy) at the surface of a-Fe2 O3 nanorods. This study paves a new and facile approach to activate a-Fe2 O3 and even other metal oxides as photoelectrodes for improved PEC water splitting performances, by engineering the surface structure to relieve the bottlenecks of charge transfer dynamics and redox reaction kinetics at the electrode/electrolyte interface.

关键词： Photoelectrochemical Water splitting Hematite nanorods Photoanodes Surface sulfurization

来源：评论

学校读者我要写书评

暂无评论

Hydrogen production by non-catalytic partial oxidation of coal in supercritical water: Explore the way to complete gasification of lignite and bituminous coal

Hydrogen production by non-catalytic partial oxidation of co...

引用

作者： Ge, Zhiwei Guo, Simao Guo, Liejin Cao, Changqing Su, Xiaohui Jin, Hui State Key Laboratory of Multiphase Flow in Power Engineering Xi'An Jiaotong University Xi'an 710049 China

Supercritical water gasification (SCWG) of coal is a promising technology for clean coal utilization. In this paper, hydrogen production by non-catalytic partial oxidation of coal was systematically investigated in supercritical water (SCW) with quartz batch reactors for the first time. The influences of the main operating parameters including residence time, temperature, oxidant equivalent ratio (ER) and feed concentration on the gasification characteristics of coal were investigated. The experimental results showed that H2 yield and carbon gasification efficiency (CE) increased with increasing temperature and decreasing feed concentration. CE increased with increasing ER, and H 2 yield peaked when ER equaled 0.1. CE increased quickly within 1 min and then tended to be stable between 2 and 3 min. In particular, complete gasification of lignite was obtained at 950 C when ER equaled 0.1, as for bituminous coal, at a higher temperature of 980 C when ER equaled 0.2. © 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

关键词： Hydrogen production

来源：评论

学校读者我要写书评

暂无评论

Fabricating PdCe/OMS-2 catalysts with boosted low-temperature activity for toluene deep degradation

引用

Journal of Rare Earths 2023年第6期41卷 839-849,I0002页

作者： Lin Yue Zhihua Xu Minghua Hu Mingjiao Tian Mudi Ma Bijie Huang Chi He State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi'an Jiaotong UniversityXi'an 710049China State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Industrial Fume and Dust Pollution Control Jianghan UniversityWuhan 430056China National Engineering Laboratory for VOCs Pollution Control Material&Technology University of Chinese Academy of SciencesBeijing 101408China

Porous cryptomelane-type octahedral molecular sieve(OMS-2)with mixed Mn valence and abundant lattice oxygen species has attracted much attention in volatile organic compounds(VOC)catalytic ***,complete conversion of arene over OMS-2 catalysts at relatively low temperature is still a challenge due to its limited crystal structure and inferior ***,a series of PdCe/OMS-2 catalysts with different Pd/Ce molar ratios was fabricated by a facile impregnation method and the physicochemical properties of which were extensively characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HR-TEM),B runauer-Emmett-Teller(BET)method,X-ray fluorescence(XRF),X-ray photoelectron spectroscopy(XPS),temperature programmed reduction of H2(H2-TPR),Raman,In situ diffused reflectance infrared Fourier transform spectra(DRIFTS),and density functional theory(DFT)*** show that the total conversion of toluene can be achieved at 207℃ over PdCe2 with apparent activation energy as low as 62.6 kJ/*** strong synergistic effect between Pd and Ce remarkably boosts the catalytic activity of OMS-2,attributed to the abundant Mn^(3+)-O bands and active surface oxygen *** results reveal that oxygen vacancy can be formed over PdCe2 much easily than that of Pd/OMS-2 and Ce/OMS-2 with the oxygen vacancy formation energy of2.42,2.83 and 2.68 eV,*** increasing the Pd content cannot promote the catalytic activity although PdO is a critical active center in toluene *** vacancy attributed to the integrative effect of Pd,Ce and Mn species plays a promine nt role over prepared catalysts in toluene activation *** findings reported in this work showed new insights into the designing of highly efficient OMS-2catalysts for VOC deep oxidation by tuning oxygen vacancy concentration.

关键词： PdCe/OMS-2 Toluene Catalytic oxidation Oxygen vacancy Rare earths

来源：评论

学校读者我要写书评

暂无评论

Polarized imaging dynamic light scattering for simultaneous measurement of nanoparticle size and morphology

引用

Particuology 2024年第2期85卷 213-223页

作者： Bingyao Wang Tianyi Cai Xiaoshu Cai Wu Zhou Zeqi Liu Schoolof Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai200093China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering Shanghai200093China Jiaxing MeaParTech Instrument Technology Co. LtdZhejiang314000China

The performance of nanoparticles is often affected by particle size and ***,electron microscopy or atomic force microscopy is typically utilized to determine the size and morphology of ***,there are issues such as difficult sample preparation,long processing times,and challenges in quantitative ***,it is of great significance to develop a fast,accu-rate,and statistical method to measure the size and morphology of *** this study,a new method,called polarized imaging dynamic light scattering(PIDLS),is *** nanoparticles are irradiated with a vertical linearly polarized laser beam,and a polarization camera collected the dynamic light scattering images of particles at four different polarization directions(0°,45°,90°,and 135°)at a scattering angle of 90°.The average particle size and distribution are obtained using the imaging dy-namic light scattering method at 0°polarization direction,and the morphology of the particles is ob-tained based on the depolarization patterns of the scattered *** optical sphericityΦis defined based on the degree of linear polarization(DoLP).It is also implemented for the quantitative evaluation of the sphericity of the nanoparticles,including spherical,octahedral,nanoplate,nanorod,and linear *** with the Poincarésphere parameterψ,the morphology of the nanoparticles can be roughly *** addition,PIDLS enables the measurement of particle size and morphology distributions simultaneously for evaluating the uniformity of *** effectiveness of PIDLS is verified by the measurement of five kinds of industrial titanium dioxide as well.

关键词： Imaging dynamic light scattering Polarized light scattering Non-spherical nanoparticles Morphology Online measurement

来源：评论

学校读者我要写书评

暂无评论

Noble-metal free plasmonic nanomaterials for enhanced photocatalytic applications—A review

引用

Nano Research 2022年第12期15卷 10268-10291页

作者： Jinghua Li Yiming Zhang Yalong Huang Bing Luo Li Jing Dengwei Jing International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an710049China

Plasmonic nanomaterial catalysis is currently at the frontier of photocatalysis,overcoming the limitations of wide bandgap semiconductors for light *** localized surface plasmon resonance(LSPR)properties allow broad ultraviolet-visible-near infrared ray(UV-vis-NIR)absorption,making it an ideal material for solar energy *** plasmonic nanostructures rely on precious *** noble metal plasmonic nanomaterials have proven to be one of the strategies for enhancing photocatalytic activity,their expensive cost and limitations in light absorption range have hindered their practical *** a result,noble-metal free plasmonic nanomaterials have risen to the top of the research priority ***,this paper reviews the fundamental principles and classification of the LSPR effect of noble-metal free plasmonic nanomaterials in photocatalytic and their recent applications in hydrogen generation,carbon dioxide reduction,and pollutant *** cases elucidate the possible working mechanism of enhanced photocatalysis by noble-metal free plasmonic ***,the challenges and future opportunities for noble-metal free plasmonic nanomaterials in energy conversion and storage are discussed and envisioned.

关键词： localized surface plasmon resonance(LSPR) noble-metal free plasmonic nanomaterials photocatalysis

来源：评论

学校读者我要写书评

暂无评论

Electrospinning engineering of gas electrodes for high-performance lithium-gas batteries

引用

Carbon Energy 2024年第10期6卷 353-398页

作者： Jingzhao Wang Xin Chen Jianan Wang Xiangming Cui Ze Wang Guangpeng Zhang Wei Lyu Maxim Shkunov S.Ravi P.Silva Yaozu Liao Kai Yang Wei Yan State Key Laboratory of Multiphase Flow in Power Engineering Department of Environmental Science and EngineeringSchool of Energy and Power EngineeringXi'an Jiaotong UniversityXi'anChina Advanced Technology Institute University of SurreyGuildfordSurreyUK State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and EngineeringDonghua UniversityShanghaiChina

Lithium-gas batteries(LGBs)have garnered significant attention due to their impressive high-energy densities and unique gas conversion ***,the practical application of LGBs faces substantial challenges,including sluggish gas conversion kinetics inducing in low-rate performance and high overpotential,along with limited electrochemical reversibility leading to poor cycle *** imperative task is to develop gas electrodes with remarkable catalytic activity,abundant active sites,and exceptional electrochemical ***,a versatile and well-established technique for fabricating fibrous nanomaterials,has been extensively explored in LGB *** this work,we emphasize the critical structure-property for ideal gas electrodes and summarize the advancement of employing electrospun nanofibers(NFs)for performance enhancement in *** elucidating the fundamental principles of LGBs and the electrospinning technique,we focus on the systematic design of electrospun NF-based gas electrodes regarding optimal structural fabrication,catalyst handling and activation,and catalytic site optimization,as well as considerations for large-scale *** demonstrated principles and regulations for electrode design are expected to inspire broad applications in catalyst-based energy applications.

关键词： carbon nanofibers electrocatalyst electrospinning gas electrodes metal-gas batteries

来源：评论

学校读者我要写书评

暂无评论

Multi-Objective optimization of oil–gas cyclone separators considering liquid storage in the tank bottom

引用

Separation and Purification Technology 2025年

作者： Lingzi Wang Wei Du Ruiyi Liu Jianmei Feng Xueyuan Peng Feng Cao School of Energy and Power Engineering Xi’an Jiaotong University Xi’an Shaanxi 710049 China The First Gas Plant of PetroChina Changqing Oilfield Company Jingbian Shaanxi 718500 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an 710049 China

As an efficient separation device, the gas–liquid cyclone separator has been widely used in oil injection compressor systems. It can effectively reduce the oil content in the high-pressure airflow, directly affecting the fuel consumption, operating efficiency, and exhaust quality parameters of compressors, making it crucial to enhance the separator’s performance. Given the critical role of geometric configuration in determining cyclone separator efficiency, this study comprehensively considers several influencing factors including the structure parameters. Taguchi method and analysis of variance (ANOVA) were used to quantify the contribution of three factors to the performance percentage of the separator, and the dual-objective optimization of the efficiency and pressure drop of the separator was carried out with the grey correlation analysis method. In the simulation calculation, this paper employs the DPM-to-VOF method coupled with the Euler wall film (EWF) to simulate the oil droplet particle separation process, featuring model transformation capabilities under specified conditions. The investigation culminates in the development of a parametric-performance prediction model and establishes optimal operational parameters for cyclone separators: the inlet velocity ( v in ) should be set at 24.49 m/s, the height of the inner cylinder of the separator tank (H t ) should be 1.2 times the diameter, and the buffer height between the inner cylinder and the liquid surface (H m ) should be 0.9 times the diameter.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Study on TMD Control on Stability Improvement of Barge-Supported Floating Offshore Wind Turbine Based on the Multi-Island Genetic Algorithm

引用

China Ocean engineering 2019年第3期33卷 309-321页

作者： DING Qin-wei LI Chun CHENG Shan-shan HAO Wen-xing HUANG Zhi-qian YU Wan School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai 200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering Shanghai 200093 China School of Engineering University of Plymouth Devon PL4 8AA UK

A floating offshore wind turbine (FOWT) has a great potential in producing renewable energy as offshore wind resource is rich in deep sea area (water deeper than 60 m) where fixed foundations are cost-effective or deployable. However, compared with a fixed-bottom installation, FOWT has to suffer more extreme loads due to its extra degrees of freedom. Therefore, the stability of an FOWT is a key challenge in exploiting offshore deep-water wind. Focusing on the stability of barge-type FOWT, this paper is to investigate the effect of passive structural control by equipping a tuned mass damper (TMD) on the nacelle. The turbulent wind with sharp fluctuations is established both in velocity and inflow direction based on standard Kaimal turbulence spectrum as suggested in the standard IEC61400-2. The irregular wave is generated according to the Pierson-Moskowitz spectrum. The dynamic structural characteristics of FOWT are calculated based on the fully coupled aero-hydro-servo-elastic solver FAST. Evidence has shown that the proposed method of the nacelle-based TMD is effective in controlling stability of an FOWT, as the sway and roll motions of barge and the side-side displacement of tower top decreased significantly. With the increase of mass, the side-side displacement of tower-top and the amplitude of roll motion of barge reveal a trend of increasing first and then decreasing. The stiffness and damping have little effect. Furthermore, the multi-island genetic optimization algorithm (MIGA) is employed to find globally optimum structural parameters (mass, stiffness and damping) of the TMD. The optimum structure parameters of TMD are achieved when the mass is 21393 kg, damping is 13635 N/(m/s) and stiffness is 6828 N/m. By adopting the optimized TMD, stability of roll motion of barge and side-side displacement of tower-top increase up to 53% and 50% respectively when compared with the normal TMD. The simulation results verify the validity and reliability of the proposed TM

关键词： FOWT barge TMD MIGA wind wave stability

来源：评论

学校读者我要写书评

暂无评论

Boosting photocatalytic hydrogen production via interfacial engineering over a Z-scheme core/shell heterojunction

引用

Nano Research 2023年第1期16卷 352-359页

作者： Bing Luo Jinghua Li Wei Wang Chaoqian Ai Haihan Zhang Yuxin Zhao Dengwei Jing School of Chemical Engineering and Technology Xi'an Jiaotong UniversityXi'an 710049China International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Designing high efficacy photocatalysts is a promising way to improve solar fuel production *** this work,we prepared a core/shell composite of loose ZnCr layered double hydroxide nanosheets modified CdS nanorods for efficient visible light driven photocatalytic hydrogen *** highest hydrogen production rate achieved 425.8μmol·h^(−1) without adding any noble metal cocatalyst under the visible light stimulus,which is 22.4 times that of 1 wt.%Pt-modified *** corresponding apparent quantum yield is 13.9%at 420 *** is revealed that the synergistic actions of the interfacial redox shuttle of Cr^(3+)/Cr^(δ+)and the interfacial electric field enable the efficient separation of photoinduced charge carriers between two components via a Z-scheme energy band ***,with the hydrogen evolution contribution of Zn^(2+),a remarkable improvement in photocatalytic performance was achieved in contrast to bare *** work provides an effective methodology to construct highly efficient and economically viable photocatalysts for solar H_(2)production and mechanistic study.

关键词： photocatalysis heterojunction interfacial engineering noble metal free hydrogen production

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：