检索结果-内蒙古大学图书馆

Doping organic hole-transport materials for high-performance perovskite solar cells

Journal of Semiconductors 2023年第2期44卷 4-8页

作者： Dongmei He Shirong Lu Juan Hou Cong Chen Jiangzhao Chen Liming Ding Key Laboratory of Optoelectronic Technology&Systems(MoE) College of Optoelectronic EngineeringChongqing UniversityChongqing 400044China Department of Material Science and Technology Taizhou UniversityTaizhou 318000China Department of Physics Shihezi UniversityShihezi 832003China State Key Laboratory of Reliability and Intelligence of Electrical Equipment School of Materials Science and EngineeringHebei University of TechnologyTianjin 300401China Center for Excellence in Nanoscience(CAS) Key Laboratory of Nanosystem and Hierarchical Fabrication(CAS)National Center for Nanoscience and TechnologyBeijing 100190China

Single-junction and tandem perovskite solar cells(PSCs)have achieved impressive power conversion efficiencies(PCEs)of 25.7%and 31.3%,respectively,which makes it to be one of next-generation photovoltaic technologies[1−9].Inter-face engineering[3,5,10−12],composition engineering[13]and ad-ditive engineering[7,14,15]have made remarkable contribu-tions to efficiency *** with efficiency,the long-term operational stability of PSCs jogs along,which is far from the requirements of ***,almost all regular n-i-p PSCs were accomplished with classic-al organic hole-transport materials(HTMs),i.e.,PTAA[16]and spiro-OMeTAD[2,4,6].However,the highly efficient PSCs with the above organic hole-transport layers(HTL)usually suffer from *** facilitate hole transport and extraction,LiTF-SI and tBP are frequently employed to dope organic HTLs but this would sacrifice device *** use of these hygro-scopic p-dopants endows the devices with poor moisture sta-bility.

关键词： stability perovskite accomplished

来源：评论

学校读者我要写书评

暂无评论

Reinforcement Learning-Based Time-Synchronized Optimized Control for Affine Systems

IEEE Transactions on Artificial Intelligence

引用

IEEE Transactions on Artificial Intelligence 2024年第10期5卷 5216-5231页

作者： Zhang, Yuxiang Liang, Xiaoling Li, Dongyu Ge, Shuzhi Sam Gao, Bingzhao Chen, Hong Lee, Tong Heng National University of Singapore Department of Electrical and Computer Engineering 117576 Singapore Beihang University School of Cyber Science and Technology Beijing100191 China Tianmushan Laboratory Hangzhou310023 China Tongji University Clean Energy Automotive Engineering Center Shanghai201804 China

The approach of (fixed-) time-synchronized control (FTSC) aims at attaining the outcome where all the system state-variables converge to the origin simultaneously/synchronously. This type of outcome can be the highly essential performance desired in various real-world high-precision control applications. Toward this objective, this article proposes and investigates the development of a time-synchronized reinforcement learning algorithm (TSRL) applicable to a particular class of first- and second-order affine nonlinear systems. The approach developed here appropriately incorporates the norm-normalized sign function into the optimal system control design, leveraging on the special properties of this norm-normalized sign function in attaining time-synchronized stability and control. Concurrently, the actor–critic framework in reinforcement learning (RL) is invoked, and the dual quantities of system control and gradient term of the cost function are decomposed with appropriate time-synchronized control items and unknown actor/critic part and to be learned independently. By additionally employing the adaptive dynamic programming technique, the solution of the Hamilton–Jacobi–Bellman equation is iteratively approximated under this actor–critic framework. As an outcome, the proposed TSRL method optimizes the system control while attaining the notable time-synchronized convergence property. The performance and effectiveness of the proposed method are demonstrated to be effectively applicable via detailed numerical studies and on an autonomous vehicle nonlinear system motion control problem. © 2020 IEEE.

关键词： Synchronization

来源：评论

学校读者我要写书评

暂无评论

Reversible Data Hiding With Secret Encrypted Image Sharing and Adaptive Coding

引用

IEEE Internet of Things Journal 2025年第13期12卷 23933-23945页

作者： Fang, Guangtian Wang, Feng Zhao, Chenbin Qin, Chuan Chang, Ching-Chun Chang, Chin-Chen Fujian University of Technology College of Computer Science and Mathematics Fuzhou350118 China Fujian University of Technology College of Computer Science and Mathematics Key Laboratory of Big Data Mining and Applications Fuzhou350118 China Monash University Faculty of IT Department of Software Systems and Cybersecurity VIC3800 Australia Ministry of Education School of Cyber Science and Engineering Key Laboratory of Aerospace Information Security and Trusted Computing Wuhan430072 China University of Shanghai for Science and Technology School of Optical-Electrical and Computer Engineering Shanghai200093 China Feng Chia University Information and Communication Security Research Center Taichuang 40724 Taiwan Feng Chia University Department of Information Engineering and Computer Science Taichung40724 Taiwan

To ensure the security of image information and facilitate efficient management in the cloud, the utilization of reversible data hiding in encrypted images (RDHEI) has emerged as pivotal. However, most existing RDHEI schemes suffer from lower security and limited embedding capacity. To tackle these challenges, we propose a reversible data hiding with secret encrypted image sharing and adaptive coding scheme. Specifically, in the encryption phase, we introduce an improved secret sharing (SS) encryption method based on the chinese remainder theorem for polynomials (CRTP). This method not only improves the security of encrypted images but also vacates a larger room for embedding. In the embedding phase, we introduce an adaptive coding embedding approach using XOR preservation (XORP) and huffman coding, which provides high embedding capacity. Experimental results and security analysis demonstrate that our proposed encryption method achieves optimal values in security indicators for encrypted images, such as information entropy, histograms, NPCR and UACI. The proposed embedding method is superior to some state-of-the-art schemes in terms of embedding capacity. Furthermore, in datasets BOSSBase and BOWS2, the average embedding rates of the proposed embedding approach can reach 2.1745 bpp and 2.0656 bpp, respectively. © 2025 IEEE.

关键词： Cryptography Encryption Security Data mining Adaptive coding Correlation Cloud computing Polynomials Image coding Streaming media

来源：评论

学校读者我要写书评

暂无评论

A Dual-Core Dual-Mode Class-F VCO With Wide Frequency Tuning Range Using Wide Inductance-Switching-Range Inductor

引用

IEEE Microwave and Wireless technology Letters 2025年第4期35卷 460-463页

作者： Hou, Yaru Li, Runlong Chi, Pei-Ling Yang, Tao University of electronic Science and Technology of China Chengdu610036 China Sichuan Province Engineering Research Center for Broadband Microwave Circuit High Density Integration Chengdu610036 China University of Electronic Science and Technology of China School of Electronic Science and Engineering Sichuan Chengdu610054 China National Yang Ming Chiao Tung University Department of Electrical and Computer Engineering Hsinchu300 Taiwan

A novel dual-core dual-mode class-F voltage-controlled oscillator (VCO) with wide frequency tuning range (TR) is proposed in this letter. It consists of two coupled parallel "8"-shaped inductor and two crossed-coupled VCO cores. To increase the TR of the proposed VCO without adding additional footprint size, a single-turn common-mode inductor is embedded inside the "8"-shaped inductor. By controlling the mode switches, the inductor can work in different modes with large inductance difference, realizing large VCO TR consequently. Then, the two coupled inductors were engineered to form the fundamental and third harmonic resonances, respectively, thereby producing a pseudo-square wave output waveform and realizing class-F operation. With the proposed configuration, the phase noise (PN) of the proposed VCO can be significantly reduced without increasing VCO core size. To demonstrate the proposed idea, a VCO prototype is fabricated in a 65-nm CMOS process with a core size of 1.235×0.8mm. It achieves a wide frequency TR from 2.84 to 7.04 GHz. The measured PN at 1-MHz offset is from -123.9 to -113.1 dBc/Hz, demonstrating an FOMT of 196.0-201.3 dBc/Hz. © 2023 IEEE.

关键词： Variable frequency oscillators

来源：评论

学校读者我要写书评

暂无评论

A High Resolution Convolutional Neural Network with Squeeze and Excitation Module for Automatic Modulation Classification

引用

China Communications 2024年第10期21卷 132-147页

作者： Duan Ruifeng Zhao Yuanlin Zhang Haiyan Li Xinze Cheng Peng Li Yonghui School of Information Science and Technology Bejing Forestry UniversityBeijing 100083China Engineering Research Center for Forestry-Oriented Intelligent Information Processing of National Forestry and Grassland Administration Beijing 100083China Department of Computer Science and Information Technology La Trobe UniversityMelbourneVIC 3086Australia School of Electrical and Information Engineering the University of SydneySydneyNSW 2006Australia

Automatic modulation classification(AMC) technology is one of the cutting-edge technologies in cognitive radio communications. AMC based on deep learning has recently attracted much attention due to its superior performances in classification accuracy and robustness. In this paper, we propose a novel, high resolution and multi-scale feature fusion convolutional neural network model with a squeeze-excitation block, referred to as HRSENet,to classify different kinds of modulation *** proposed model establishes a parallel computing mechanism of multi-resolution feature maps through the multi-layer convolution operation, which effectively reduces the information loss caused by downsampling convolution. Moreover, through dense skipconnecting at the same resolution and up-sampling or down-sampling connection at different resolutions, the low resolution representation of the deep feature maps and the high resolution representation of the shallow feature maps are simultaneously extracted and fully integrated, which is benificial to mine signal multilevel features. Finally, the feature squeeze and excitation module embedded in the decoder is used to adjust the response weights between channels, further improving classification accuracy of proposed *** proposed HRSENet significantly outperforms existing methods in terms of classification accuracy on the public dataset “Over the Air” in signal-to-noise(SNR) ranging from-2dB to 20dB. The classification accuracy in the proposed model achieves 85.36% and97.30% at 4dB and 10dB, respectively, with the improvement by 9.71% and 5.82% compared to ***, the model also has a moderate computation complexity compared with several state-of-the-art methods.

关键词： automatic modulation classification deep learning feature squeeze-and-excitation high-resolution multi-scale

来源：评论

学校读者我要写书评

暂无评论

Systematic Elastostatic Stiffness Model of Over-Constrained Parallel Manipulators Without Additional Constraint Equations

引用

Chinese Journal of Mechanical engineering 2024年第4期37卷 258-276页

作者： Chao Yang Wenyong Yu Wei Ye Qiaohong Chen Fengli Huang College of Mechanical and Electrical Engineering Jiaxing UniversityJiaxing 314001ZhejiangChina Zhejiang Siekon Transmission Technology Co. Ltd.Jiaxing 314001ZhejiangChina National and Local Joint Engineering Research Center of Reliability Analysis and Testing for Mechanical and Electrical Products Zhejiang Sci-Tech UniversityHangzhou 310018ZhejiangChina School of Computer Science and Technology Zhejiang Sci-Tech UniversityHangzhou 310018ZhejiangChina

The establishment of an elastostatic stiffness model for over constrained parallel manipulators(PMs),particularly those with over constrained subclosed loops,poses a challenge while ensuring numerical *** study addresses this issue by proposing a systematic elastostatic stiffness model based on matrix structural analysis(MSA)and independent displacement coordinates(IDCs)extraction *** begin,the closed-loop PM is transformed into an open-loop PM by eliminating constraints.A subassembly element is then introduced,which considers the flexibility of both rods and *** approach helps circumvent the numerical instability typically encountered with traditional constraint *** IDCs and analytical constraint equations of nodes constrained by various joints are summarized in the appendix,utilizing multipoint constraint theory and singularity analysis,all unified within a single coordinate ***,the open-loop mechanism is efficiently closed by referencing the constraint equations presented in the appendix,alongside its elastostatic *** proposed method proves to be both modeling and computationally efficient due to the comprehensive summary of the constraint equations in the Appendix,eliminating the need for additional *** example utilizing an over constrained subclosed loops demonstrate the application of the proposed *** conclusion,the model proposed in this study enriches the theory of elastostatic stiffness modeling of PMs and provides an effective solution for stiffness modeling challenges they present.

关键词： Parallel manipulator Elastostatic stiffness model Matrix structural analysis Subassembly element Independent displacement coordinates

来源：评论

学校读者我要写书评

暂无评论

Wearable and interactive multicolored photochromic fiber display

引用

Light(science & Applications) 2024年第3期13卷 454-465页

作者： Pan Li Yuwei Wang Xiaoxian He Yuyang Cui Jingyu Ouyang Ju Ouyang Zicheng He Jiayu Hu Xiaojuan Liu Hang Wei Yu Wang Xiaoling Lu Qian Ji Xinyuan Cai Li Liu Chong Hou Ning Zhou Shaowu Pan Xiangru Wang Huamin Zhou Cheng-Wei Qiu Yan-Qing Lu Guangming Tao State Key Laboratory of Material Processing and Die&Mould Technology School of Materials Science and Engineering and Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China Key Laboratory of Vascular Aging(HUST) Ministry of EducationWuhan 430030China School of Optoelectronic Science and Engineering University of Electronic Science and Technology of ChinaChengdu 611731China Department of Electrical and Computer Engineering National University of SingaporeSingapore 117583Singapore National Laboratory of Solid State Microstructures Key Laboratory of Intelligent Optical Sensing and ManipulationCollege of Engineering and Applied Sciencesand Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing 210023China School of Performing Arts Wuhan Conservatory of MusicWuhan 430060China School of Mechanical Science and Engineering Huazhong University of Science and TechnologyWuhan 430074China School of Architecture and Urban Planning Huazhong University of Science and TechnologyWuhan 430074China School of Fashion Beijing Institute of Fashion TechnologyBeijing 100029China School of Optical and Electronic Information Huazhong University of Science and TechnologyWuhan 430074China Tongji Medical College Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and EngineeringDonghua UniversityShanghai 201620China

Endowing flexible and adaptable fiber devices with light-emitting capabilities has the potential to revolutionize the current design philosophy of intelligent,wearable interactive ***,significant challenges remain in developing fiber devices when it comes to achieving uniform and customizable light effects while utilizing lightweight ***,we introduce a mass-produced,wearable,and interactive photochromic fiber that provides uniform multicolored light *** designed independent waveguides inside the fiber to maintain total internal reflection of light as it traverses the *** impact of excessive light leakage on the overall illuminance can be reduced by utilizing the saturable absorption effect of fluorescent materials to ensure light emission uniformity along the transmission *** addition,we coupled various fluorescent composite materials inside the fiber to achieve artificially controllable spectral radiation of multiple color systems in a single *** prepared fibers on mass-produced kilometer-long using the thermal drawing *** fibers can be directly integrated into daily wearable devices or clothing in various patterns and combined with other signal input components to control and display patterns as *** work provides a new perspective and inspiration to the existing field of fiber display interaction,paving the way for future human–machine integration.

关键词： fiber interactive colored

来源：评论

学校读者我要写书评

暂无评论

ANIMC: A Soft Approach for Autoweighted Noisy and Incomplete Multiview Clustering

IEEE Transactions on Artificial Intelligence

引用

IEEE Transactions on Artificial Intelligence 2022年第2期3卷 192-206页

作者： Fang, Xiang Hu, Yuchong Zhou, Pan Wu, Dapeng Hubei Engineering Research Center on Big Data Security School of Cyber Science and Engineering The School of Computer Science and Technology Huazhong University of Science and Technology Wuhan430074 China Key Laboratory of Information Storage System Ministry of Education of China School of Computer Science and Technology Huazhong University of Science and Technology Wuhan430074 China Hubei Engineering Research Center on Big Data Security School of Cyber Science and Engineering Huazhong University of Science and Technology Wuhan430074 China Department of Electrical and Computer Engineering University of Florida GainesvilleFL32611 United States

Multiview clustering has wide real-world applications because it can process data from multiple sources. However, these data often contain missing instances and noises, which are ignored by most multiview clustering methods. Missing instances may make these methods difficult to use directly, and noises will lead to unreliable clustering results. In this article, we propose a novel autoweighted noisy and incomplete multiview clustering (ANIMC) approach via a soft autoweighted strategy and a doubly soft regular regression model. First, by designing adaptive semiregularized nonnegative matrix factorization, the soft autoweighted strategy assigns a proper weight to each view and adds a soft boundary to balance the influence of noises and incompleteness. Second, by proposing θ-norm, the doubly soft regularized regression model adjusts the sparsity of our model by choosing different θ. Compared with previous methods, ANIMC has three unique advantages: 1) it is a soft algorithm to adjust our approach in different scenarios, thereby improving its generalization ability;2) it automatically learns a proper weight for each view, thereby reducing the influence of noises;3) it performs doubly soft regularized regression that aligns the same instances in different views, thereby decreasing the impact of missing instances. Extensive experimental results show its superior advantages over other state-of-the-art works. © 2020 IEEE.

关键词： Clustering algorithms

来源：评论

学校读者我要写书评

暂无评论

Adaptive nonsingular integral-type dynamic terminal sliding mode synchronizer for disturbed nonlinear systems and its application to secure communication systems

引用

JVC/Journal of Vibration and Control 2023年第11-12期29卷 2566-2578页

作者： Vaseghi, Behrouz Mobayen, Saleh Din, Sami ud Hashemi, Seyedeh Somayeh Vu, Mai The Department of Electrical and Computer Engineering Abhar Branch Islamic Azad University Abhar Iran Department of Electrical Engineering University of Zanjan Zanjan Iran Future Technology Research Center National Yunlin University of Science and Technology Douliu Taiwan Department of Electrical Engineering Namal University Mianwali Mianwali Pakistan School of Intelligent Mechatronics Engineering Sejong University Seoul Korea Republic of

This study proposes an adaptive nonsingular integral dynamic terminal sliding mode tracker/synchronizer for disturbed nonlinear systems along with its usage in safe communication systems. The convergence of the closed-loop structure under unknown uncertainty and disturbances is guaranteed via Lyapunov analysis. Furthermore, a parameter-tuning method is planned to approximate the upper bound of uncertainty and disturbance terms, since this latter is typically unknown in practice. The proposed approach is used to design a digital secure transmission scheme according to the chaotic systems. The effectiveness of the suggested approach is validated using computer simulations on a benchmark example of chaotic system. The obtained outcomes clearly confirm the ability of the planned control approach enables to attain the desired tracking/synchronizing performance despite the disturbances. Additionally, when implemented to the data encryption of a communication system, the proposed control and secure communication techniques enabled the complete and secure retrieval of the original digital sequences. © The Author(s) 2022.

关键词： Chaotic systems

来源：评论

学校读者我要写书评

暂无评论

Iterative learning algorithm of upper limb rehabilitation robot based on BP neural network 12

Iterative learning algorithm of upper limb rehabilitation ro...

引用

12th International Conference on Intelligent Control and Information Processing, ICICIP 2024

作者： Pang, Zaixiang Deng, Xiaomeng Gong, Linan Wang, Nan Changchun University of Technology School of Engineering Training Center Changchun China Changchun University of Technology School of Computer Science and Engineering Changchun China Changchun Vocational Institute of Technology School of Mechanical and Electrical Engineering Changchun China Jilin Weimiao Medical Technology Co. Ltd Changchun China

ISBN: (纸本)9798350308020

At present, in the trajectory tracking control of upper limb rehabilitation robot, there are nonlinear and uncertain problems of patients' spasticity disturbance. Therefore, an iterative learning control algorithm based on Back Propagation neural network is proposed in this paper. Based on the repeatability of the rehabilitation robot system, a multi-layer feedforward neural network trained by error reverse propagation algorithm is combined with iterative learning. The algorithm can effectively compensate the effect of spasmodic interference on the system performance and improve the convergence rate of trajectory tracking errors. The structure of the iterative learning control system based on neural network and the iterative learning control algorithm based on Back Propagation neural network are described. The process of network selection and robot trajectory tracking iterative learning control is given. Through simulation experiments, the feasibility and effectiveness of the algorithm are verified, which solves the above problems and meets the control requirements of rehabilitation training. © 2024 IEEE.

关键词： Network layers

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：