检索结果-内蒙古大学图书馆

5th IEEE Conference on Knowledge Based engineering and Innovation, KBEI 2019

作者： Ahangar, Sajjad Mehrabani, Mehdi Valizadeh Pouransari Shorijeh, Alireza Masouleh, Mehdi Tale Mechanical Eng. Dept. of Islamic Azad University Central Tehran Branch Tehran Iran School of Mechanical Eng. University of Tehran Tehran Iran Human Robot Interaction Laboratory School of Electrical and Computer Eng. University of Tehran Tehran Iran

ISBN: (纸本)9781728108728

This paper addresses the design of a 3 degree-of-freedoms (DOF) Delta parallel robot with one DOF redundancy attached to its base. This paper aims at presenting the state-of-the-art of the design and control for the proposed redundant robot for improving time and saving energy consumption. The main idea behind the proposed design consists in examining the performance of a movable Delta robot for pick-and-place purpose. To this end, some improvement has been made on the design of the robot. Spherical magnetic joints are used for the sake of easing the assembling and disassembling of components. At the end, kinematic properties of the robot are investigated. © 2019 IEEE.

关键词： Energy utilization

来源：评论

学校读者我要写书评

暂无评论

Design a 3-DOF Delta Parallel robot by One Degree Redundancy along the Conveyor Axis, A Novel Automation Approach

Design a 3-DOF Delta Parallel Robot by One Degree Redundancy...

引用

International Conference on Knowledge-Based engineering and Innovation (KBEI)

作者： Sajjad Ahangar Mehdi Valizadeh Mehrabani Alireza Pouransari Shorijeh Mehdi Tale Masouleh Mechanical Eng. dept. of Islamic Azad University Central Tehran Branch Tehran Iran School of Mechanical Eng. University of Tehran Iran Human & Robot interaction Laboratory School of Electrical and Computer Eng. University of Tehran Iran

关键词： Kinematics Parallel robots Service robots Energy consumption End effectors

来源：评论

学校读者我要写书评

暂无评论

Kinematics and Control of a 4-DOF Delta Parallel Manipulator

Kinematics and Control of a 4-DOF Delta Parallel Manipulator

引用

RSI/ISM International Conference on robotics and Mechatronics (ICROM)

作者： Mehdi Azmoun Ali Rouhollahi Mehdi Tale Masouleh Ahmad Kalhor Human and Robot Interaction Laboratory Faculty of New Sciences and Technologies University of Tehran Tehran Iran Human and Robot Interaction Laboratory School of Electrical and Computer Engineering University of Tehran Tehran Iran

ISBN: (纸本)9781728101286;9781728101279

In this paper, the design, kinematic problem and control of a 4-DOF Delta parallel manipulator are investigated. Delta is a parallel manipulator which is widely used for pick-and-place applications. A simulation of this manipulator is designed in SimMechanic environment. The verification of the inverse kinematic problem has been done in simulation environment. Afterwards, different controllers like PID and Sliding-Mode based on the inverse kinematic problem are designed in simulation environment and their results are compared with each other. According to value of the root mean square error, PID controller exhibits better performance and tracked the desired path with less error compared to other controllers. Then the Sliding-Mode control is designed and based to the obtained results, leads to less chattering in tracking the desired path.

关键词： Kinematics End effectors Mathematical model Legged locomotion Solid modeling

来源：评论

学校读者我要写书评

暂无评论

Design and Control of a Suspended Cable-Driven Parallel robot with Four Cables

Design and Control of a Suspended Cable-Driven Parallel Robo...

引用

RSI/ISM International Conference on robotics and Mechatronics (ICROM)

作者： Ramin Mersi Sina Vali Morteza Shahamiri haghighi Ghasem Abbasnejad Mehdi Tale Masouleh Human and Robot Interaction Laboratory Mechanical and Energy Eng. Department Shahid Beheshti University Tehran Iran Human and Robot Interaction Laboratory School of Electrical and Computer Eng. University of Tehran Tehran Iran

ISBN: (纸本)9781728101286;9781728101279

This paper addresses design and control of a new suspended under-constrained cable-driven parallel robot with four cables. In order to improve the estimation of the cable lengths, an auxiliary roller screw mechanism is utilized to move the winch linearly for proper cable coiling on one layer. Also, for the sake of obtaining the pose of the robot in real-time, an angular rate sensor is embedded on the end-effector. The collected data from the angular rate sensor is used to make equivalent the solution of the forward geometric-static problem to the solution of linear system of equations. The foregoing reduced system can be readily solved and leads to the pose of the moving platform in real-time which is a definite asset in control. Moreover, kinematic problem of the cable-driven parallel robot is provided and a new method for obtaining the forward geometric-static problem is proposed.

关键词： Kinematics robot sensing systems Parallel robots Winches Real-time systems Global Positioning System

来源：评论

学校读者我要写书评

暂无评论

Design, Development and Control of a Three Flexible-Fingers Gripper Based On Hand Gesture

Design, Development and Control of a Three Flexible-Fingers ...

引用

RSI/ISM International Conference on robotics and Mechatronics (ICROM)

作者： Rasoul Sadeghian Pooyan Sedigh Parastoo Azizinezhad Shahrooz Shahin Mehdi Tale Masouleh Human and Robot Interaction Laboratory Tehran Iran Department of Biomedical Engineering Science and Research Branch Islamic Azad University Tehran Iran Faculty of Electrical and Computer Science Robotic Engineering Tehran North Branch Islamic Azad University Tehran Iran Human and Robot Interaction Laboratory School of Electrical and Computer Engineering University of Tehran Tehran Iran

ISBN: (纸本)9781728101286;9781728101279

In this paper, the process of design, and construction of a flexible gripper with three fingers is presented. The fingers of the proposed gripper are fabricated using a 3D printing device. The gripper is controlled remotely by an autonomous glove which is designed to help people with disability. In order to ameliorate the movement accuracy of the gripper a Fuzzy-PID controller is implemented on the system. The result of experimental tests demonstrate a decrease of the gripper movement error to less than 2 degrees in average. An ultrasonic sensor is set on the gripper's body to improve the grasping process by detecting the distance of the object to the gripper. The fabricated fingers are flexible and provides the ability of grasping the objects with irregular shapes. The experimental test approves the significant performance of the gripper in term of grasping complex shape objects.

关键词： Grippers Grasping Flexible printed circuits robot sensing systems Shape Kalman filters

来源：评论

学校读者我要写书评

暂无评论

Microfluidic standing air bubbles (μSABs) 22

Microfluidic standing air bubbles (μSABs)

引用

22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018

作者： Liu, Jixiao Zhou, Yidi Li, Bowen Zhu, Tong Guo, Shijie Li, Tiejun School of Mechanical Engineering Hebei University of Technology Tianjin300132 China State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology Tianjin300132 China Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction Hebei University of Technology Tianjin300132 China

ISBN: (纸本)9781510897571

A highly stable and controllable standing micro-bubble formation and manipulation system is reported. The standing air bubbles originate in specially designed crevice structures on microfluidic channel walls in a repeatable and scalable manner. The size and geometry of μSABs are tuned by varying air mass transfer through a selectively permeable barrier where the bubbles attaching to. Implemented experiments explain the multiphysical coupling principles behind the phenomena. Experimental data indicates a good linearity between μSABs volumetric variation rate and control pressure under normal handling conditions (flow velocity: up to 7.4 mm/s). Copyright© (2018) by Chemical and Biological Microsystems *** rights reserved.

关键词： Flow velocity

来源：评论

学校读者我要写书评

暂无评论

Push Recovery Methods Based on Admittance Control Strategies for a NAO-H25 humanoid

Push Recovery Methods Based on Admittance Control Strategies...

引用

RSI/ISM International Conference on robotics and Mechatronics (ICROM)

作者： Fatemeh Sadat Mousavi Mehdi Tale Masouleh Ahmad Kalhor Payam Ghassemi Human and Robot Interaction Laboratory School of Electrical nad Computer Engineering University of Tehran Tehran Iran Faculty of New Sciences and Technologies University of Tehran Tehran Iran

ISBN: (纸本)9781728101286;9781728101279

This paper discusses two main investigations regarding push recovery of a NAO humanoid robot. The first part indicates the simulation results of different strategies retrieved from human behaviors, namely: Ankle, Hip, and Hip-ankle strategies. These methods are separately assessed and their efficiencies are discussed. To the end of converting torque parameter to robot's movement with a reasonable approximation in the aforementioned strategies' obtained models, a new approach, the so-called Virtual leg model, is introduced. The second discussion assesses the admittance control strategy, which relies on disturbances' energy absorption. Individual control algorithms are introduced for each disturbances' categories based on NAO's real conditions. This paper proposes a new strategy, which investigates the influence of admittance control coefficients against external disturbances, by considering a virtual interaction between robot's feet and the ground, and introducing a Kalman-filter-based estimator. All proposed methods are simulated in NAO-H25's simulation environment.

关键词： Legged locomotion Hip Admittance robot kinematics Measurement uncertainty robot sensing systems

来源：评论

学校读者我要写书评

暂无评论

Accuracy Comparison of Spherical Parallel Manipulators Based on Joint Clearance 5

Accuracy Comparison of Spherical Parallel Manipulators Based...

引用

5th RSI International Conference on robotics and Mechatronics, IcRoM 2017

作者： Mojtaba, Seyed Mousavi, Seyed Khoogar, Ahmadreza Masouleh, Mehdi Tale Mechanical Engineering Department Malek Ashtar University of Technology Tehran Iran Human and Robot Interaction Laboratory School of Electrical and Computer Engineering University of Tehran Iran

ISBN: (纸本)9781538657034

In this paper, three types of Spherical Parallel Manipulators (SPM) are compared from accuracy point of view based on joint clearances. The 3-RRR SPM is an overconstraint parallel mechanism and one can presume that it may exhibits an accurate motion. But beside the foregoing advantage, this structure has some drawbacks such as requiring high manufacturing precision and the difficulty of assembling the mechanism. Two other types, 3-RRS and 3-RSR, are non-overconstrained and do not have the above disadvantages, therefore these two types with 3- RRR are put into contrast from accuracy point of view. First, a method to obtain a model of moving platform pose (position and orientation) error is introduced which leads to a standard convex optimization problem. Since error calculation depends on the end-effector configuration, more than 1000 configurations are taken into account in order to cover SPMs workspaces. Then maximum values of six components of the pose error in each configuration are computed for each type. Finally, the three SPMs are compared based on maximum position and orientation error for given joint clearances. The obtained results revealed that the 3- RRR SPM has better position accuracy while in the case of orientation, the 3-RRS SPM has lowest maximum error between SPMs under study in the prescribed workspace. © 2017 IEEE.

关键词： Mechanisms

来源：评论

学校读者我要写书评

暂无评论

AGlobal benchmark of algorithms for segmentinglate gadolinium-enhanced cardiac magnetic resonance imaging

arXiv

引用

arXiv 2020年

作者： Xiong, Zhaohan Xia, Qing Hu, Zhiqiang Huang, Ning Bian, Cheng Zheng, Yefeng Vesal, Sulaiman Ravikumar, Nishant Maier, Andreas Yang, Xin Heng, Pheng-Ann Ni, Dong Li, Caizi Tong, Qianqian Si, Weixin Puybareau, Elodie Khoudli, Younes Géraud, Thierry Chen, Chen Bai, Wenjia Rueckert, Daniel Xu, Lingchao Zhuang, Xiahai Luo, Xinzhe Jia, Shuman Sermesant, Maxime Liu, Yashu Wang, Kuanquan Borra, Davide Masci, Alessandro Corsi, Cristiana De Vente, Coen Veta, Mitko Karim, Rashed Preetha, Chandrakanth Jayachandran Engelhardt, Sandy Qiao, Menyun Wang, Yuanyuan Tao, Qian Nuñez-Garcia, Marta Camara, Oscar Savioli, Nicolo Lamata, Pablo Zhao, Jichao Auckland Bioengineering Institute University of Auckland Auckland New Zealand State Key Lab of Virtual Reality Technology and Systems Beihang University Beijing China School of Electronics Engineering and Computer Science Peking University Beijing China SenseTime Inc Shenzhen China Tencent Jarvis Laboratory Shenzhen China Pattern Recognition Lab Friedrich-Alexander-Universität Erlangen-Nürnberg Erlangen Germany Department of Computer Science and Engineering Chinese University of Hong Kong Hong Kong National-Regional Key Technology Engineering Laboratory for Medical Ultrasound School of Biomedical Engineering Shenzhen University Shenzhen China School of Computer Science Wuhan University Wuhan China Shenzhen Key Laboratory of Virtual Reality and Human Interaction Technology Shenzhen Institutes of Advanced Technology Chinese Academy of Sciences Shenzhen China Epita Research and Development Laboratory Paris France Department of Computing Imperial College London London United Kingdom School of Naval Architecture Shanghai Jiao Tong University Ocean & Civil Engineering Shanghai China School of Data Science Fudan University Shanghai China Epione Research Group Universite Cote d'Azur Inria Sophia Antipolis France Harbin Institute of Technology School of Computer Science and Technology Harbin China Department of Electric University of Bologna Electronic and Information Engineering Cesena Italy Department of Biomedical Engineering Eindhoven University of Technology Eindhoven Netherlands School of Biomedical Engineering and Imaging Sciences Kings College London London United Kingdom Faculty of Electrical Engineering and Information Technology University of Magdeburg Magdeburg Germany Heidelberg University Hospital Germany Biomedical Engineering Center Fudan University Shanghai China Department of Radiology Leiden University Medical Center Leiden Netherlands Department of Information and Communication Technologies Universitat Pompeu Fabra Barcelona Spain D

Segmentation of cardiac images, particularly late gadolinium-enhanced magnetic resonance imaging (LGE-MRI)widely used for visualizing diseased cardiacstructures, is a crucial first step for clinical diagnosis and treatment. However, direct segmentation ofLGE-MRIsischallenging due to *** most clinical studies have relied on manual and labor-intensive approaches, automatic methods are of high interest, particularly optimized machine learning *** address this, we organized the "2018 Left Atrium Segmentation Challenge" using 154 3D LGE-MRIs, currently the world's largest cardiac LGE-MRI dataset, and associated labels of the left atriumsegmented by three medical experts,ultimately attractingthe participation of27 international teams. In this paper, extensive analysis of the submitted algorithms using technical and biological metrics was performed by undergoing subgroup analysis and conducting hyper-parameter analysis,offeringan overall picture ofthe major design choices of convolutional neural networks(CNNs) and practical considerations for achieving state-of-the-art left atrium segmentation. Results show the top methodachieved a dice score of 93.2%and a mean surface to a surface distance of 0.7mm, significantly outperforming prior state-of-the-art. Particularly, our analysisdemonstrated that double, sequentially usedCNNs, in which a first CNN is used for automatic region-of-interestlocalization and a subsequent CNN is used for refinedregional segmentation, achieved far superiorresults than traditional methods and pipelinescontaining *** findings from this study can potentially be extended to other imaging datasets and modalities, having an impact on the wider medical imaging *** large-scale benchmarking study makes a significant step towards much-improved segmentation methods for cardiac LGE-MRIs, and will serveas animportant benchmark for evaluating and comparing the future works in the field. Copyright © 2020, Th

关键词： Magnetic resonance imaging

来源：评论

学校读者我要写书评

暂无评论

Flexible disaster response of tomorrow final presentation and evaluation of the CENTAURO system

arXiv

引用

arXiv 2019年

作者： Klamt, Tobias Rodriguez, Diego Baccelliere, Lorenzo Chen, Xi Chiaradia, Domenico Cichon, Torben Gabardi, Maßimiliano Guria, Paolo Holmquist, Karl Kamedula, Malgorzata Karaoguz, Hakan Kashiri, Navvab Laurenzi, Arturo Lenz, Christian Leonardis, Daniele Hoffman, Enrico Mingo Muratore, Luca Pavlichenko, Dmytro Porcini, Francesco Ren, Zeyu Schilling, Fabian Schwarz, Max Solazzi, Maßimiliano Felsberg, Michael Frisoli, Antonio Gustmann, Michael Jensfelt, Patric Nordberg, Klas Roßmann, Jürgen Süß, Uwe Tsagarakis, Nikos G. Behnke, Sven Autonomous Intelligent Systems University of Bonn Germany Humanoids and Human-Centred Mechatronics Istituto Italiano di Tecnologia Genoa Italy Department of Robotics Perception and Learning KTH Royal Institute of Technology Stockholm Sweden PERCRO Laboratory TeCIP Institute Sant'Anna School of Advanced Studies Pisa Italy Institute for Man-Machine Interaction RWTH Aachen University Germany Computer Vision Laboratory Linköping University Sweden Lausanne Switzerland Kerntechnische Hilfsdienst GmbH Karlsruhe Germany School of Electrical and Electronic Engineering University of Manchester United Kingdom

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：