检索结果-内蒙古大学图书馆

SSRN 2022年

作者： Li, Ming Jiang, Tianyi Ren, Yukun Jiang, Hongyuan School of Mechatronics Engineering Harbin Institute of Technology West Da-zhi Street 92 Harbin150001 China State Key Laboratory of Robotics and System Harbin Institute of Technology West Da-zhi Street 92 Heilongjiang Harbin150001 China

Triboelectric nanogenerator (TENG) has been proved to be a promising technology for harvesting decentralized energy. However, the application fields of the traditional TENGs are limited by the high crest factor. Here a constant direct current TENG (CDC-TENG) with low crest factor is proposed by connecting three rotating TENGs with specific phase difference (Δ θ ) in parallel. Excellent wear resistance and humidity resistance are demonstrated owing to the soft-contact mode and 3D encapsulated design. For the CDC-TENG (3P6E), the crest factor surprisingly decreases to 1.05 while that of the TENGs without Δ θ is up to 1.31. Meanwhile, the current density up to 3021 μA·m -2 is achieved at the rotation speed of 500 r·min -1 . Then, owing to the excellent output of constant direct current (DC), a commercial timer is directly driven by the CDC-TENG without using capacitor. Finally, the CDC-TENG is used as the power source of cathodic protection (CP) system, which exhibits an excellent corrosion protection effect. In general, this work provides a meaningful template for TENGs to broaden the marine industrial applications of constant DC demand. © 2022, The Authors. All rights reserved.

关键词： Nanogenerators

来源：评论

学校读者我要写书评

暂无评论

An Acoustic Activated Nozzle for Microdroplet Generation and Dispensing

SSRN

引用

SSRN 2023年

作者： Yin, Qiu Li, Xiuyuan Ma, Zhichao Zhang, Wenming State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai200240 China Institute of Medical Robotics School of Biomedical Engineering Shanghai Jiao Tong University No.800 Dongchuan Road Shanghai200240 China

Droplet-based microfluidic has emerged as a versatile tool for widespread applications such as biochemical analysis and synthesis, for which the generation and manipulation of the microdroplets are the fundamental. Acoustic based droplet control has shown its advantages of good biocompatibility and widescale tunability. Here, we demonstrate an acoustic controlled nozzle that is integrated with both generation and directed dispensing of microdroplets. The system can generate monodisperse microdroplets with tunable sizes (50 μm – 641 μm) at a highest throughput of 2000 droplets per second. Besides, by tuning the acoustic frequency, the droplets can be steered to different directions after their formation, realizing on-demand dispensing of the microdroplets. The controlled microdroplet generation and dispensing are both attributed to the acoustic streaming effect induced by the nozzle vibration. Two basic mechanisms for the droplet control were studied: (1) the correlation between the droplet size and the acoustic actuation time, (2) the dependence of the droplet dispensing direction on the acoustic frequency. This work paves the way towards programmable control over acoustic generation and dispensing of microdroplets, which has great potential in the applications of bio-chemical analysis and synthesis. © 2023, The Authors. All rights reserved.

关键词： Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

Mechanics of Soft-Body Rolling Motion without External Torque

引用

Physical Review Letters 2025年第19期134卷 198401-198401页

作者： Xudong Liang Yimiao Ding Zihao Yuan Yuxuan Han Yutang Zhou Junqi Jiang Zongling Xie Peng Fei Yixuan Sun Pan Jia Guoying Gu Zheng Zhong Feifei Chen Guangwei Si Zhefeng Gong School of Science Harbin Institute of Technology Shenzhen 518055 China Department of Neurology of the Fourth Hospital and School of Brain Science and Brain Medicine Zhejiang University School of Medicine Hangzhou 310058 China Robotics Institute and State Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering Shanghai Jiao Tong University Shanghai 200240 China State Key Laboratory of Cognitive Science and Mental Health Institute of Biophysics Chinese Academy of Sciences 15 Datun Road Beijing 100101 China University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China Huazhong University of Science and Technology Optical and Electronic Information Wuhan 430074 China Zhejiang Lab Hangzhou 311121 China Shanghai Key Laboratory of Intelligent Robotics Meta Robotics Institute Shanghai Jiao Tong University Shanghai 200240 China Liangzhu Laboratory MOE Frontier Science Center for Brain Science and Brain-machine Integration State Key Laboratory of Brain-machine Intelligence Zhejiang University 1369 West Wenyi Road Hangzhou 311121 China NHC and CAMS Key Laboratory of Medical Neurobiology Zhejiang University Hangzhou 310058 China

The Drosophila larva, a soft-body animal, can bend its body and roll efficiently to escape danger. However, contrary to common belief, this rolling motion is not driven by the imbalance of gravity and ground reaction forces. Through functional imaging and ablation experiments, we demonstrate that the sequential actuation of axial muscles within an appropriate range of angles is critical for generating rolling. We model the interplay between muscle contraction, hydrostatic skeleton deformation, and body-environment interactions, and systematically explain how sequential muscle actuation generates the rolling motion. Additionally, we construct a pneumatic soft robot to mimic the larval rolling strategy, successfully validating our model. This mechanics model of soft-body rolling motion not only advances the study of related neural circuits, but also holds potential for applications in soft robotics.

关键词： Creatinine

来源：评论

学校读者我要写书评

暂无评论

Muscle-fiber array inspired, multiple-mode, pneumatic artificial muscles through planar design and one-step rolling fabrication

引用

National Science Review 2021年第10期8卷 68-78页

作者： Jiang Zou Miao Feng Ningyuan Ding Peinan Yan Haipeng Xu Dezhi Yang Nicholas X.Fang Guoying Gu Xiangyang Zhu State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Robotics Institute School of Mechanical Engineering Shanghai Jiao Tong University Department of Mechanical Engineering Massachusetts Institute of Technology

Advances in development of artificial muscles have enabled creation of soft robots with biological dexterity and self-adaption in unstructured environments; however, production of scalable artificial muscles with multiple-mode actuations remains elusive. Inspired by muscle-fiber arrays in muscular hydrostats, we present a class of versatile artificial muscles called MAIPAMs(muscle-fiber array inspired pneumatic artificial muscles), capable of multiple-mode actuations(such as parallel elongation-bending-spiraling actuations, 10 parallel bending actuations and cascaded elongation-bending-spiraling actuations). Our MAIPAMs consist of active 3 D elastomer-balloon arrays reinforced by a passive elastomer membrane,achieved through a planar design and one-step rolling fabrication approach. We introduce prototypical designs for the MAIPAMs and demonstrate their muscle-mimic structures and versatility, as well as their scalable ability to integrate flexible but non-stretchable layers for contraction and twisting actuation modes and compliant electrodes for self-sensing. We further demonstrate that this class of artificial muscles shows potential for versatile robotic applications, such as carrying a camera for recording videos, gripping or manipulating objects, and climbing a pipe-line.

关键词： soft robotics pneumatic artificial muscles multiple-mode actuations bio-inspired design

来源：评论

学校读者我要写书评

暂无评论

Moobot: a miniature origami omnidirectional jumping robot with high trajectory accuracy

TechRxiv

引用

TechRxiv 2022年

作者： Tang, Lingqi Li, Yao Li, Bing School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen Shenzhen518055 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China

The jumping trajectory control is important for the jumping robots to overcome different obstacles. However, the trajectory control of a micro jumping robot is not easy. No insect-scale jumping robots have demonstrated the precise trajectory following yet. We proposed a miniature origami omnidirectional jumping robot (Moobot) that achieved the feedback control of jumping trajectory. The jumping of the robot is based on a four-bar origami structure and the SMA actuators. Unlike the tethered micro robots that powered externally, we integrated a miniature control board with LiPo battery on the robot for remote control. The overall system measured 6 g in mass, 5.5 cm in length and 2cm in height. Two strain gauges and an IMU sensor were used on the robot for the feedback control of the jumping force and take-off angle, respectively. Meanwhile, a reliable jumping mechanism and a novel supporting leg were designed to improve the jumping stability and trajectory accuracy. The standard deviation of the jumping distances was less than 1.4 cm, which is greatly improved from all previous micro jumping robots. Furthermore, we integrated the yaw control and conducted the omnidirectional jumping experiments. The results revealed that Moobot could climb different platforms from all directions precisely. © 2022, CC BY.

关键词： Feedback control

来源：评论

学校读者我要写书评

暂无评论

Multi-kernel Correntropy Regression: Robustness, Optimality, and Application on Magnetometer Calibration

arXiv

引用

arXiv 2023年

作者： Li, Shilei Chen, Yihan Lou, Yunjiang Shi, Dawei Li, Lijing Shi, Ling The Department of Electronic and Computer Engineering The Hong Kong University of Science and Technology Hong Kong The State Key Laboratory of Robotics and System School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen Shenzhen518055 China The School of Automation Beijing Institute of Technology China The School of Information and Control Engineering China University of Mining and Technology China

This paper investigates the robustness and optimality of the multi-kernel correntropy (MKC) on linear regression. We first derive an upper error bound for a scalar regression problem in the presence of arbitrarily large outliers and state that the kernel bandwidth plays an important role in minimizing the lowest upper error bound. Then, we find that the proposed MKC is related to a specific heavy-tail distribution, where its head shape is consistent with the Gaussian distribution but its tail shape is heavy-tailed, and the extent of heavy-tail is controlled by the kernel bandwidth. It becomes a Gaussian distribution when the bandwidth is infinite, which allows one to tackle both Gaussian and non-Gaussian problems without explicitly investigating the noise distributions. To explore the optimal underlying distribution parameters, an expectation-maximization-like (EM) algorithm is developed to estimate the parameter vectors and the distribution parameters in an alternating manner. The results show that our algorithm can achieve equivalent performance compared with the traditional linear regression under Gaussian noise, and it significantly outperforms the conventional method under heavy-tailed noise. Both numerical simulations and experiments on a magnetometer calibration application verify the effectiveness of the proposed method. Note to Practitioners-The goal of this paper is to enhance the accuracy of conventional linear regression in handling outliers while maintaining its optimality under Gaussian assumptions. Our algorithm is formulated under the maximum likelihood estimation (MLE) framework, assuming the regression residuals follow a type of heavy-tailed noise distribution with an extreme case of Gaussian. The degree of the heavy tail is explored alternatingly using an Expectation-Maximization (EM) algorithm which converges very quickly. The robustness and optimality of the proposed approach are investigated and compared with the traditional approaches. Both th

关键词： Linear regression

来源：评论

学校读者我要写书评

暂无评论

Multi-kernel Correntropy-based Orientation Estimation of IMUs: Gradient Descent Methods

arXiv

引用

arXiv 2023年

作者： Li, Shilei Li, Lijing Shi, Dawei Lou, Yunjiang Shi, Ling The Department of Electronic and Computer Engineering The Hong Kong University of Science and Technology Hong Kong The School of Information and Control Engineering China University of Mining and Technology China The School of Automation Beijing Institute of Technology China The State Key Laboratory of Robotics and System School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen Shenzhen518055 China

This paper presents two computationally efficient algorithms for the orientation estimation of inertial measurement units (IMUs): the multi-kernel correntropy-based gradient descent (CGD) and the multi-kernel correntropy-based decoupled orientation estimation (CDOE). Traditional methods, such as gradient descent (GD) and decoupled orientation estimation (DOE), rely on the least square (LS) criterion in algorithm derivation, making them vulnerable to external acceleration and magnetic interference. To address this issue, we first demonstrate that the multi-kernel correntropy loss (MKCL) is an optimal objective function under the maximum likelihood estimation (MLE) framework when the noise follows a specific type of heavy-tailed distribution. Then, we provide some important properties of the MKCL as a cost function. By replacing the LS cost with the MKCL, we develop the CGD and CDOE algorithms. We evaluate the effectiveness of our proposed methods by comparing them with existing algorithms in various situations. Experimental results indicate that our proposed methods (CGD and CDOE) outperform their conventional counterparts (GD and DOE), especially when faced with external acceleration and magnetic disturbances. Furthermore, the new algorithms demonstrate significantly lower computational complexity than Kalman filter-based approaches, making them suitable for applications with low-cost microprocessors. Copyright © 2023, The Authors. All rights reserved.

关键词： Maximum likelihood estimation

来源：评论

学校读者我要写书评

暂无评论

Mechanism Design and Motion Analysis of Heavy⁃Load Transfer Robot with Parallel Four⁃Bar Mechanism

引用

Transactions of Nanjing University of Aeronautics and Astronautics 2022年第5期39卷 606-618页

作者： ZHANG Jing WANG Dongbao WU Guangping GUO Hongwei LIU Rongqiang College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024P.R.China School of Electronic Information and Electrical Engineering Shanghai Jiao Tong UniversityShanghai 200240P.R.China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001P.R.China

Heavy-load transfer robots are widely used in automobile production and machinery manufacturing to improve production *** order to meet the needs of large billet transfer,a 4-DOF transfer robot is designed in this paper,which consists of parallel four-bar *** Jacobian matrix referring to the mapping matrix from the joint velocity to the operating space velocity of the transfer robot can be solved by the differential-vector *** mean value of the Jacobian matrix condition number in the workspace is used as the global performance index of the robot velocity and the optimization *** constraint condition is established based on the actual working *** the linkage length optimization is carried out to decrease the length of the linkage and to increase the global performance index of *** total length of robot rods is reduced by 6.12%.The global performance index of velocity is improved by 45.15%.Taking the optimized rod length as the mechanism parameter,the distribution of the motion space of the transfer robot is ***,the results show that the proposed method for establishing the Jacobian matrix of the lower-mobility robot and for the optimization of the rods based on the velocity global performance index is accurate and *** workspace distribution of the robot meets the design requirements.

关键词： parameter optimization motion analysis mechanism design transfer robot heavy-load

来源：评论

学校读者我要写书评

暂无评论

Design of a Tendon-Actuated Foldable Wheeled-Legged Hybrid Mobile Robot with high load-bearing capacity

Design of a Tendon-Actuated Foldable Wheeled-Legged Hybrid M...

引用

International Conference on Control, Automation, robotics and Vision (ICARCV)

作者： Yinan Yang Chongyang Zhang Wenfu Xu School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen Shenzhen P.R. China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

ISBN: (纸本)9781665476881

Mobile robots that can carry heavy loads play an important role in transporting and exploring in unstructured environment. However, there are some problems existing in conventional motor direct-drive robots such as excessive joint torque and unfoldable legs when they are under heavy loads. This paper proposes a tendon-actuated foldable wheeled-legged robot with high load-bearing capacity. A spreader is attached to the knee joint so that the output torque of the motor can be amplified by pulling the end of the spreader with a cable. The single and double fixed pulleys are used to reduce the required cable tension and avoid the interference of different cables, which can better achieve the folding of legs. In addition, the statics and kinematics of the tendon-actuated leg and the formulas for calculating the required tension and motor torque, as well as the relationship between foot velocity, joint speed, and motor speed are given. Finally, Matlab is used for simulation analysis, and it is found that the joint torques required for the tendon actuation are lower than for the direct actuation at the same joint angles.

关键词： Legged locomotion Knee Torque Pulleys Kinematics Mechanical cables Static analysis

来源：评论

学校读者我要写书评

暂无评论

Compliance Control and Simulation of a Next-Generation Chewing Robot

Compliance Control and Simulation of a Next-Generation Chewi...

引用

Chinese Control Conference (CCC)

作者： Xudong Wang Weiliang Xu Jaspreet Dhupia John Bronlund Jianda Han Department of Mechanical & Mechatronics Engineering the University of Auckland Auckland New Zealand Reddit Institute Palmerston North New Zealand School of Food and Advanced Technology Massey University Palmerston North New Zealand Institute of Robotics and Automatic Information System College of Artificial Intelligence Nankai University Tianjin China Tianjin Key Laboratory of Intelligent Robotics Nankai University Tianjin China

The aim of the development of the chewing robots is to study the biomechanics of chewing process or produce the bolus for further research by in vitro experiments. Some chewing robots are open loop controlled and couldn't behave like a human. However, to make the chewing robots more bin-mimic, force feedback based closed loop control is required. To improve the efficiency of the in-vitro chewing experiments, a next generation chewing robot with cam-follower based multi-chambers was developed previously, which can be used test the effect of different chewing parameters on the chewing performance and food texture changes simultanously. In this paper, modified admittance control based on the force feedback was applied to the chewing robot. At first, to improve food particle size reduction to a distribution which closely matches that produced by human and protect the components of the robot from breakage or impact damage, a spring mass based system, called remote center compliance (RCC), was developed and applied to the robot to control the chewing force. Then, based on the knowledge of human chewing process, power-based algorithm, and modified admittance control method were used as the feedback to adjust the angular velocity of the motor and corresponding chewing velocity of the teeth. The performance of the control model was also simulated, results showed that the model is reliable to control the robot and make it bio-mimic.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：