检索结果-内蒙古大学图书馆

Effect of Overload and Underload on Subsequent Deformation Behavior during Cyclic Deformation

Zairyo/Journal of the Society of Materials science, Japan 2022年第2期71卷 159-166页

作者： Kondou, Ryouji Yama, Katsunari Energy and Environmental Program School of Engineering Faculty of Engineering University of the Ryukyus Nishihara-cho Nakagami-gun Okinawa903-0213 Japan Department of Mechanical Systems Engineering Graduate School of Engineering and Science University of the Ryukyus Nishihara-cho Nakagami-gun Okinawa903-0213 Japan

A multi-scale analysis of elasto-plastic deformation and dislocation movement and accumulation of tricrystalline models during cyclic deformation was performed. The accumulation of dislocations in geometrically necessary dislocations (GNDs) and statistically stored dislocations (SSDs) was investigated in detail. Experimental observations have shown that fatigue life and fatigue crack propagation are also deteriorated when the material is subjected to overload or underload. However, in the microscopic and mesoscopic regions, where the effects of the crack tip shape change are not related to the size of the crack tip, a different phenomenon is essentially occurring. In this paper, the effects of overload and underload are investigated using a simple model without a crack. From the analysis results, it was found that the dislocation structure generated in the material subjected to overload or underload affects the subsequent deformation behavior. However, even though the absolute values are the same, the effects of overloading and underloading on the subsequent deformation are different, and underloading increases the non-uniformity of the subsequent deformation, which is on the dangerous side, while overloading decreases with increasing the number of repetitions. ©2022 The Society of Materials science, Japan

关键词： Crack tips

来源：评论

学校读者我要写书评

暂无评论

Recent advances in wearable electrochemical biosensors towards technological and material aspects

引用

Biosensors and Bioelectronics: X 2024年 19卷

作者： Hosseinzadeh Fakhr, Mahan Lopez Carrasco, Ivan Belyaev, Dmitry Kang, Jihun Shin, YeHyeon Yeo, Jong-Souk Koh, Won-Gun Ham, Jeongwoo Michaelis, Alexander Opitz, Joerg Beshchasna, Natalia Fraunhofer Institute for Ceramic Technologies and Systems IKTS Maria-Reiche-Straße 2 Dresden01109 Germany Faculty of Mechanical Science and Engineering Dresden University of Technology Dresden Germany School of Integrated Technology College of Computing Yonsei University Seoul Korea Republic of BK21 Graduate Program in Intelligent Semiconductor Technology Yonsei University Seoul Korea Republic of Department of Chemical and Biomolecular Engineering Yonsei University Seoul Korea Republic of

The next generation of wearable biosensors comes with the latest advancements in biosensor technology. Soft and stretchable electrode materials like hydrogels with the similar functionalities of human tissue including stretchability, self-healability, and responsiveness to different stimuli have emerged as the most versatile materials in wearable electronics. The incorporation of conductive nanofillers is found to enhance the sensitivity of the electrochemical biosensors significantly. Microfluidic technology has reduced the volume of samples and reagents required for the analysis, allowing continuous biomedical monitoring from a drop of biofluid. In this paper, the most advanced progress in electrochemical wearable platforms that can noninvasively and continuously monitor the biochemical markers in body fluids for the diagnosis and health management is reviewed. Innovation in microelectronics, modification, fabrication technologies, and detection methods are the main focus of the discussion. In particular, hydrogel-based sensors and microfluidic systems as the latest technology trends in wearable detection are discussed in detail. Integration of miniaturized electrochemical wearable biosensors with wireless technology as a great promise for real-time healthcare monitoring and point-of-care (POC) diagnostics is also summarized. Finally, we outline the most advanced wearable biosensors with optimized material and design as well as key challenges that need to be addressed to improve sensing performance (accuracy, sensitivity, selectivity, stability), portability (miniaturized size and light weight), and flexibility of the wearable biosensors. © 2024 The Authors

关键词： Body fluids

来源：评论

学校读者我要写书评

暂无评论

Towards Fabrication of Next-Generation Physical Sensors Through Integrating Suspended Sub-Micron Silicon Nanowires with Microelectromechanical systems

Towards Fabrication of Next-Generation Physical Sensors Thro...

引用

IEEE SENSORS

作者： Basit Ali Mehdi Bostan Shirin Muhammad Muzammil Ege Nacarkucuk Sina Zare Pakzad Umut Kerimzade B. Erdem Alaca Department of Mechanical Engineering Koç University Istanbul Turkey Computational Sciences and Engineering Program Koç University Istanbul Turkey Institute of Sensor and Actuator Systems TU Wien Austria Christian Doppler Laboratory for Piezoelectric Silicon MEMS with Enhanced Sensitivity and Responsivity Institute of Sensor and Actuator Systems TU Wien Austria nSTAR-Koç University Nanofabrication and Nanocharacterization Center for Scientific and Technological Advanced Research Koç University Istanbul Turkey Surface Science and Technology Center (KUYTAM) Koç University Istanbul Turkey

ISBN: (数字)9798350363517

ISBN: (纸本)9798350363524

Silicon nanowires possess superior mechanical, electrical, and optical properties, making them ideal for next-generation sensors. This study presents a scalable technology for monolithic fabrication of sub-micron silicon nanowires with micro electromechanical systems, achieving integration of suspended sub-micron silicon nanowires within microelectromechanical systems up to 80 μm thick on Si substrates, with high yield and repeatability. The technological approach is validated on silicon-on-insulator substrates, followed by electromechanical characterization via electrical probe measurements and vibrational testing for performance validation. The presented technology is promising for the potential development of next-generation high-performance physical sensors such as accelerometers and gyroscopes.

关键词： Microelectromechanical systems Sensor phenomena and characterization Vibration measurement Silicon Sensor systems Nanowires Optical sensors Next generation networking Substrates Electromechanical sensors

来源：评论

学校读者我要写书评

暂无评论

Effect of chemical composition and microstructure on the thermal conductivity of Mg-Al-Ca alloys

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2024年第1期74卷 9-13页

作者： Kirimoto, Yuichi Kondo, Natsuki Ito, Mizuki Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan School of Sustainable Design Materials and Engineering University of Toyama Toyama-shi Toyama Japan Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama Toyama-shi Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

In recent years, the increasing demand for electric vehicles, digital devices such as PCs and smartphones, and renewable energy storage systems has created a need for higher-performance batteries. Accordingly, the thermal conductivity of the case that houses the battery is becoming increasingly important. In this study, compositions with high thermal conductivity and good castability were investigated, focusing on Mg-Al-Ca alloys, and the relationship between the two was examined through thermal conductivity measurements and microstructural observations. As a result, the Mg-6%Al-4%Ca alloy was optimal in terms of castability and thermal conductivity. It was confirmed that a lower Al solid solution capacity and a higher purity of the matrix phase are important to improve the thermal conductivity. It is also suggested that the second phase, platelet Al2Ca, is likely to be recognized and enriched in the matrix, contributing to the improvement of thermal conductivity. The amount of Ca solid solution in the matrix was suggested to be reduced by the enrichment of Al in the matrix. The Ca solid solution in the matrix was found to be less effective in reducing thermal conductivity than the Al solid solution. © 2024 The Japan Institute of Light Metals.

关键词： Magnesium alloys

来源：评论

学校读者我要写书评

暂无评论

Investigation of manufacturing conditions of single roll rapidly solidified ribbon for anode materials of magnesium rechargeable batteries

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2023年第11期73卷 537-544页

作者： Kirimoto, Yuichi Fuke, Kousuke Tsukeda, Tadayoshi Aida, Tetsuo Nemoto, Yasunori Ikeda, Minoru Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama 3190 Gofuku Toyama-shi-shiToyama Toyama930-8555 Japan Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama Toyama-shi-shiToyama Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama-shi-shiToyama Toyama Japan FLOW Science JAPAN Shizuoka Hamamatsu-shi Japan CHUETSU METAL WORKS CO. LTD Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Saitama Kawaguchi-shi Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

Magnesium rechargeable batteries are attracting attention as next-generation rechargeable batteries because of their resource abundance, cost, safety, and high electrical capacity per volume compared to conventional lithium-ion rechargeable batteries. Our joint research team focused not only on the electrochemically active magnesium composition of ribbon for the negative electrode materials of magnesium rechargeable batteries but also on the production process, focused on the single roll type liquid quenching and rapid solidification method, which can be produced at a lower cost. In this study, the optimal processing conditions were examined by comparing CAE analysis with ribbon actually manufactured, with the aim of further improving manufacturing conditions using the same method, such as length discontinuities, thickness, and surface properties of ribbon. We specifically various process parameters such as injection pressure and roll peripheral speed for evaluation. As a result, several linear cracks were observed on the surface of the ribbon as the peripheral speed increased and as the Gap became wider, and the surface properties tended to deteriorate. Also, It was found that the dominant factor in the length of the ribbon was the peripheral speed. As the peripheral speed increased, the length of the ribbon tended to increase. © 2023 Japan Institute of Light Metals. All rights reserved.

关键词： Surface properties

来源：评论

学校读者我要写书评

暂无评论

Synthesis of zeolites from calcareous waste concrete powder

Results in Materials

引用

Results in Materials 2022年 13卷

作者： Kanda, Yasuyuki Harada, Satori Mechanical Engineering Program School of Engineering Faculty of Engineering University of the Ryukyus 1 Senbaru Nishihara-cho Nakagami-gun Okinawa 903-0213 Japan Mechanical Systems Engineering Course Graduate School of Engineering and Science University of the Ryukyus 1 Senbaru Nishihara-cho Nakagami-gun Okinawa 903-0213 Japan

In this study, zeolites were synthesized from calcareous waste concrete powder (WCP) using a hydrothermal synthesis method. Effective utilization methods of waste concrete are required worldwide for prolonging the final dumping sites’ lifetime and for promoting a society that recycles. Calcareous concrete, which includes many calcium components, has been widely used. The WCP includes mainly calcite (at 66.9%) and quartz. First, we applied hydrothermal synthesis to raw WCP. However, X-ray diffraction analysis (XRD) revealed no zeolite synthesis. Next, we used the same approach on WCP-HCl (WCP with the calcium component removed by HCl treatment). For WCP-HCl, the synthesis of analcime-type zeolites was confirmed based on XRD and simple absorption tests, in which the WCP-HCl color changed from gray to blue upon its absorption of methylene blue. Finally, to determine the analcime synthesis requirements, we experimentally varied the synthesis. Analcime synthesis was observed at temperatures above 433 K after at least 12 h of heating and for NaOH solution concentrations above 2 mol/L. © 2021 The Authors

关键词： Analcime Hydrothermal synthesis method Recycle Waste concrete Zeolite

来源：评论

学校读者我要写书评

暂无评论

Estimation of the main air pollutants from different biomasses under combustion atmospheres by artificial neural networks

引用

Chemosphere 2024年 352卷 141484页

作者： Monteiro, Thalyssa Oliveira Alves, Pedro Augusto Araújo da Silva de Almeida Nava Barradas Filho, Alex Oliveira Villa-Vélez, Harvey Alexander Cruz, Glauber Postgraduate Program in Mechanical Engineering (PPGMEC) Department of Mechanics and Materials Federal Institute of Education Science and Technology of Maranhão (IFMA) Maranhão São Luís Brazil Postgraduate Program in Computer Science and Computational Mathematics (PPG-CCMC) Department of Computer Science University of São Paulo (USP) São Carlos São Paulo Brazil Data Analysis and Artificial Intelligence Laboratory (DARTi) Department of Computational Engineering Federal University of Maranhão (UFMA) Maranhão São Luís Brazil Department of Chemical Engineering Federal University of Maranhão (UFMA) Maranhão São Luís Brazil Processes and Thermal Systems Laboratory (LPSisTer) Department of Mechanical Engineering Federal University of Maranhão (UFMA) Maranhão São Luís Brazil

The production of biofuels to be used as bioenergy under combustion processes generates some gaseous emissions (CO, CO2, NOx, SOx, and other pollutants), affecting living organisms and requiring careful assessments. H... 详细信息

The production of biofuels to be used as bioenergy under combustion processes generates some gaseous emissions (CO, CO₂, NO_x, SO_x, and other pollutants), affecting living organisms and requiring careful assessments. However, obtaining such information experimentally for data evaluation is costly and time-consuming and its in situ obtaining for regional biomasses (e.g., those from Northeast Brazil (NEB) is still a major challenge. This paper reports on the application of artificial neural networks (ANNs) for the prediction of the main air pollutants (CO, CO₂, NO, and SO₂) produced during the direct biomass combustion (N₂/O₂:80/20%) with the use of ultimate analysis (carbon, hydrogen, nitrogen, sulfur, and oxygen). 116 worldwide biomasses were used as input data, which is a relevant alternative to overcome the lack of experimental resources in NEB and obtain such information. Cross-validation was conducted with k-fold to optimize the ANNs and performance was analyzed with the use of statistical errors for accuracy assessments. The results showed an acceptable statistical performance for all architectures of ANNs, with 0.001–12.41% MAPE, 0.001–5.82 mg Nm⁻³ MAE, and 0.03–52.30 mg Nm⁻³ RMSE, highlighting the high precision of the emissions studied. On average, the differences between predicted and real values for CO, CO₂, NO, and SO₂ emissions from NEB biomasses were approximately 0.01%, 10⁻⁶%, 0.14%, and 0.05%, respectively. Pearson coefficient provided consistent results of concentration of the ultimate analysis in relation to the emissions studied and effectiveness of the test set in the developed models. © 2024 Elsevier Ltd

关键词： Brazilian northeastern Environmental statistics Evaluation metrics Gaseous emissions Predictive models Thermoconversion

来源：评论

学校读者我要写书评

暂无评论

Improvement of corrosion resistance and heat dissipation of Mg-6%Al-4%Ca alloy by the addition of Mn, Mm, and the surface treatment

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2023年第12期73卷 646-650页

作者： Ito, Mizuki Kondo, Natsuki Kirimoto, Yuichi Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan School of Sustainable Design Materials and Engineering University of Toyama Toyama Toyama-shi Japan Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama Toyama Toyama-shi Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama Toyama-shi Japan CHUETSU METAL WORKS CO LTD.. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Toyama Imizu-shi Japan

With the recent digitization, electronic equipment housings are required to be thin-walled and have rigidity, heat dissipation, corrosion resistance, and electromagnetic shielding properties. Magnesium alloys are promising materials that satisfy these requirements. Mg-Al alloys have good castability and high strength, but their thermal conductivity decreases. In general, adding alloying elements to magnesium decreases thermal conductivity the effect of aluminum addition is significant. It was found that adding calcium to Mg-Al alloys to form Mg-Al-Ca (AX) alloys results in higher thermal conductivity than that of Mg-Al alloys. However, AX alloys have poor corrosion resistance and require post-treatment such as surface treatment. In this study, AX64, which has high thermal conductivity among the AX series alloys, was used as the basic composition, and corrosion resistance was improved by adding manganese and misch metal, and an attempt was made to improve corrosion resistance and emissivity through surface treatment. The change in thermal conductivity by heat treatment was also investigated. Experimental results showed that the addition of manganese and misch metal improved corrosion resistance and thermal conductivity. Plasma anodization also improved corrosion resistance and emissivity. Heat treatment of these alloys at 400°C improved the thermal conductivity with longer holding time. © 2023 The Japan Institute of Light Metals.

关键词： Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Machine Learning-Enhanced Design of Lead-Free Halide Perovskite Materials Using Density Functional Theory

arXiv

引用

arXiv 2024年

作者： Kumar, Upendra Kim, Hyeon Woo Maurya, Gyanendra Kumar Raj, Bincy Babu Singh, Sobhit Kushwaha, Ajay Kumar Cho, Sung Beom Ko, Hyunseok Jinju52851 Korea Republic of Department of Materials Science and Engineering Hanyang University Seoul04763 Korea Republic of Department of Physics GLA University Mathura281406 India School of Material Science and Engineering Pusan National University 2 Busandaehak-ro 63beon-gil Geumjeong-gu Busan46241 Korea Republic of Department of Mechanical Engineering The University of Rochester New York14611 United States Materials Science Program University of Rochester RochesterNY14627 United States Department of Metallurgy Engineering and Materials Science Indian Institute of Technology Indore Khandwa Road Simrol Indore453552 India Department of Energy Systems Research Ajou University Suwon16499 Korea Republic of

The investigation of emerging non-toxic perovskite materials has been undertaken to advance the fabrication of environmentally sustainable lead-free perovskite solar cells. This study introduces a machine learning methodology aimed at predicting innovative halide perovskite materials that hold promise for use in photovoltaic applications. The seven newly predicted materials are as follows: CsMnCl4, Rb3Mn2Cl9, Rb4MnCl6, Rb3MnCl5, RbMn2Cl7, RbMn4Cl9, and CsIn2Cl7. The predicted compounds are first screened using a machine learning approach, and their validity is subsequently verified through density functional theory calculations. CsMnCl4 is notable among them, displaying a bandgap of 1.37 eV, falling within the Shockley-Queisser limit, making it suitable for photovoltaic applications. Through the integration of machine learning and density functional theory, this study presents a methodology that is more effective and thorough for the discovery and design of materials. © 2024, CC BY.

关键词： Density functional theory

来源：评论

学校读者我要写书评

暂无评论

Engineering for global development: Characterizing the discipline through a systematic literature review

Engineering for global development: Characterizing the disci...

引用

ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2020

作者： Burleson, Grace Austin, Jesse-Breneman Design Science Program Integrated Systems and Design University of Michigan Ann ArborMI48109 United States Global Design Laboratory Department of Mechanical Engineering University of Michigan Ann ArborMI48109 United States

ISBN: (纸本)9780791884010

Over the past 50 years, researchers have repeatedly proposed the establishment of a new interdisciplinary engineering field in Engineering for Global Development (EGD), whose analytical tools and design processes result in positive social impacts and poverty alleviation in a global development context. Within each discipline and research area, a growing body of work has sought to systematically create scientific knowledge in this area. However, a recent network analysis of Human-Centered Design plus Development research indicates that sub-communities are not collaborating at a high level and therefore the overall research agenda may lack cohesion. This paper presents a descriptive analysis of EGD research within mechanical engineering along four dimensions through a systematic literature review and secondary data analysis. Results from the review and a Latent Dirichlet Allocation model indicate EGD work in mechanical engineering draws upon research methodologies from a number of other fields and has low levels of consensus on technical terminology. These results suggest consensus in the broader interdisciplinary EGD field should be examined. Copyright © 2020 ASME.

关键词： Statistics

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：