检索结果-内蒙古大学图书馆

RACER - A design FOR MAINTAINABILITY

NAVAL ENGINEERS JOURNAL 1985年第5期97卷 139-146页

作者： DONOVAN, MR MATTSON, WS Michael R. Donovanis a 1974 graduate of the United States Naval Academy where he received his undergraduate degree in naval architecture. In 1975 he received a master of science degree in naval architecture and marine engineering from the Massachusetts Institute of Technology. After completing the Navy's nuclear power training program he served as machinery division officer in USSBainbridge (CGN-25) and chemistry and radiological controls assistant in USSLong Beach (CGN-9). He successfully completed the Navy's surface warfare officer qualification and passed the nuclear engineer's examination administered by Naval Reactors. He was then assigned to the Ship Design and Engineering Directorate (SEA-05) Naval Sea Systems Command as head systems engineer on the DDG-51 ship design project where he received the Navy Commendation Medal for outstanding performance. He is currently with Solar Turbines Incorporated as manager ship integration and integrated logistic support for the Rankine cycle energy recovery (RACER) system. Mr. Donovan has lectured at Virginia Polytechnic Institute teaching marine engineering and has given presentations on ship design at various symposiums and section meetings for both ASNE and SNAME. He has been a member of ASNE and SNAME since 1972 and is registered as a professional engineer in California and Virginia. Wayne S. Mattsonreceived his B.S. degree in mechanical engineering from Western New England College in 1972. Following graduation he attended Naval Officer Candidate School and was subsequently assigned as a project officer to COMOPTEVFOR where he was responsible for technical and operational test plans their execution and final equipment appraisal. Following a tour as engineering officer aboard the USSNespelen (AOG-55) he was assigned as commissioning MPA aboard the USSElliot (DD-967) the fifthSpruanceclass destroyer. For the past six years he has been employed by Solar Turbines Incorporated in program management within the advanced development department. He is currently

There is a great deal of emphasis currently in the Navy on the issues of reliability and maintainability. If a system or component is out of commission, it obviously cannot perform its mission. Thus, systems and components must be reliable, with low failure rates, and maintainable, with short repair times when the system does become inoperable. To be effective, these attributes must be incorporated into new ship systems early in the design stage. The Rankine cycle energy recovery (RACER) system is a heat recovery steam cycle designed to recover energy from the exhaust of an LM2500 gas turbine for augmentation of a ship's propulsion system. The RACER system provides several advantages to a gas turbine powered ship, one of which is improved fuel efficiency for significant annual fuel savings. This saving does not come free, however, since, in general, any additional system installed in the ship will have some maintenance requirements. In keeping with the Navy's current emphasis, a key philosophy in the design of the RACER system has been to minimize this maintenance burden. After a brief description of the RACER system and its design philosophy, the techniques being used during the design phase to minimize the maintenance burden on the fleet are presented. Trade-off studies concerning acquisition versus life-cycle costs, including fuel and maintenance costs, are discussed. Innovations incorporated into this state-of-the-art system are reviewed with an emphasis on design for affordability.

关键词： COGENERATION PLANTS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

FUTURE PROPULSION MACHINERY technology FOR GAS-TURBINE POWERED FRIGATES, DESTROYERS, AND CRUISERS

引用

NAVAL ENGINEERS JOURNAL 1984年第2期96卷 34-46页

作者： BASKERVILLE, JE QUANDT, ER DONOVAN, MR USN The Authors Commander James E. Baskerville USNis presently assigned to Naval Sea Systems Command (NA VSEA) as the Ship Design Manager for the DDG 51 the Navy's next generation surface combatant. A graduate of the U.S. Naval Academy Class of 1969 he is a qualified Surface Warfare Officer and designated Engineering Duty Officer (ED). He received his M.S. degree in Mechanical Engineering and his professional degree of Ocean Engineer from the Massachusetts Institute of Technology (MIT) and holds a patent right on an Electronic Control and Response System. His naval assignments include tours in USSRamsey (FFG-2) Aide and Flag Lieutenant to the Commander Naval Electronic Systems Command and Ship Superintendent Surface Type Desk Officer and Assistant Design Superintendent at NA VSHIPYD Pearl Harbor. He was awarded the Meritorious Service Medal for distinguished performance at Pearl Harbor Naval Shipyard. As an author he has contributed articles to the ASNEJournaland given presentations at local sections on ship design the use of innovative technology in ship repair and maintenance and the costs and risks associated with engineering progress. Commander Baskerville is a registered Professional Engineer in the State of Virginia an adjunct professor teaching marine engineering at Virginia Tech. and in addition to ASNE which he joined in 1975 is a member of SNAME Tau Beta Pi Sigma Xi ASME and the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE). Dr. Earl R. Quandt:received his degree of Chemical Engineer from the University of Cincinnati in 1956 and his Ph.D. degree in Chemical Engineering from the University of Pittsburgh in 1961. He worked in the naval reactors program at the Bettis Atomic Power Laboratory from 1956 to 1963. Since that time he has been with David Taylor Naval Ship Research and Development Center Annapolis Maryland where he is Head of the Power Systems Division. He contributed to this paper while on a one year assignment to the U.S. Naval Academy as V

A turning point occurred in naval engineering in 1972 when the U.S. N avy chose to use marine gas turbines for the propulsion of its new SPRUANCE and PERRY Class ships. This paper reviews the more than twenty years of experience with turbine technology and its design integration into combat ships needed to make that decision. It is concluded that the availability of a good second generation aircraft derivative engine with proven reliability and a strong commercial base, i.e., the LM-2500, was as important to the decision as was the predicted improved ship effectiveness and cost benefits. This paper discusses improvements that can be made to the twin engine, single gear, single propeller shaft system. Focusing only on this mechanical transmission concept, it addresses the impact of possible improvements to the engine, gear, and shafting. In particular, the paper discusses current LM-2500 related R&D efforts to: (a) obtain improved part-power fuel rates, (b) integrate with a reversing reduction gear, and (c) add on a waste heat recovery steam cycle. Looking ahead to the year 2000, this paper suggests that a successor to the ubiquitous LM-2500 will appear in the 15 MW power range to provide the next step in the evolution of the twin engine package. This new naval engine will most likely be based on an aircraft core that exists at present, such that it will have demonstrated its reliability and commercial potential through many hours of testing prior to its mid-1990 marine conversion. This new engine is expected to offer improved air flow, an excellent fuel rate (approaching a flat 0.30 LB/HP-HR), and effective maintenance monitoring, all at some expense in size, weight, and cost. The year 2000 engine will burn a liquid hydrocarbon fuel similar to JP-5 because of its aircraft origins. Combined with advances in gear and shafting technology, the full twin engine propulsion system of the year 2000 should be markedly lighter, smaller, and more efficient than today's units.

关键词：

来源：评论

学校读者我要写书评

暂无评论

design FOR NEW-JERSEY, IOWA, AND DES-MOINES MODERNIZATION

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 25-38页

作者： SIMS, PJ EDWARDS, JR DICKEY, RL SHULL, HS Philip J. Sims:graduated from Webb Institute in 1971 and went to work for the Advance Design Branch of the Naval Ship Engineering Center. He was part of the FFG-7 design team in 1972. The 1973–75 years were spent developing automated early-stage aircraft carrier design procedures and performing carrier design trade-off work in support of the CVV design. He returned to school in 1976 for a masters at M.I. T. The 1977–80 period was spent updating the Navy's destroyer-cruiser early-stage design procedures and performing studies for the CGN-42 reserve FFX and DDX (later DDG 51) projects. Also during this period he was team leader on concept formulation (CONFORM) studies of new ships such as a heavy combatant and a low detectability ship. From 1981 to early 1983 Mr. Sims was Design Integration Manager for the BB-62 and Ship Design Manager for the BB-61 and CA-134. He is presently principal naval architect for the FFX study and also works on the NA TO frigate effort. James F. Edwards Sr:.is the Technical Director Ship Analytics Inc. Washington D.C. Operations and was the Ship Design Manager for the battleship USSNew Jerseyprior to his departure from NAVSEA in August 1983. He joined the U.S. Navy Reserves in 1954 and served on active duty from 1957 to 1960. From 1961 to 1963 he worked for McLaughlin Research Corporation as a section head in the drafting department. From 1963 to 1966 he worked for the Vitro Corporation of America in the Terrier (surface missile systems) Department. In 1966 he participated in the contract design of the first shipboard integrated digital ASW Command and Control system while working for the Stanwick Corporation. In 1967 Mr. Edwards accepted a position at NAVSHIPS in the Combat System Integration Division. In 1974 he transferred to what is currently NAVSEA's Hull Design Division. In 1980 Mr. Edwards was designated as the Battleship and Heavy Cruiser General Arrangements Task Leader and subsequently served as the Hull Task Group Manager the Ship Configuration Control Manager and fina

In reactivating the battleship New Jersey , the Navy faced three major problems. The baseline data on the ship was not readily available or reliable, a new generation cruise missile armament was proposed, and the ship delivery schedule was very tight. After doing a feasibility study, system design engineers were taken onboard the mothballed ship to resolve the design problems. Being on the ship allowed an intensive effort and immediate reference to the actual ship configuration. The tools used to control this effort were a ship check plan, a ship check form and the master arrangement drawing. Simultaneously with the design effort, a repair scoping effort was conducted. The design evolution and solutions to the major problems are described. The results of the New Jersey effort are shown with sample documentation, the ship characteristics and the downstream design effort. The Iowa was the next ship to be modernized. The top level requirements were the same as New Jersey's but new problems were encountered. More options were investigated which diverted attention from the basic effort. A fundamental difference was the Iowa had not had a 1968 reactivation as the New Jersey had, so items that were repair and reactivation on the New Jersey in 1968 had to be part of the Iowa modernization. A major influence on the Iowa design process was that a complete set of specifications for a private yard bid had to be developed. The next effort was to install the same New Jersey modernization payload on a Des Moines class heavy cruiser. Heavy cruisers are large ships but significantly smaller than battleships and much closer to their naval architectural limits of weight and center of gravity. They have much less topside area than the battleships, and the new payload was very topside space consuming. The cruisers are also much more restricted in internal volume. Two feasibility studies were conducted. One resolved volume problems but approached the weight and center of gravity limits.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RETROFITTING OF BULBOUS BOWS ON UNITED-STATES NAVY AUXILIARY AND AMPHIBIOUS WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1984年第6期96卷 40-51页

作者： CHUN, SK HOUGH, JJ ENGLE, AH FUNG, SC Stephen K. Chunis a graduate of the Maritime College of the State University of New York class of 1981 from which he received a B.E. degree in naval architecture and his license as a Third Assistant Engineer from the U.S. Coast Guard. Since graduation he has worked for the U.S. Navy as a naval architect with the Hull Form and Hydrodynamics Performance Division (SEA 55W3) of the Naval Sea Systems Command. Currently he is the task leader for hydrodynamic design for the DDG-51. He is also responsible for bulbous bow and appendage design for surf ace ships. Mr. Chun is a member of ASNE SNAME and ASE. Jeffrey J. Hough:is currently a naval architect with the Hull Form and Hydrodynamic Performance Division (SEA 55VV3) of the Naval Sea Systems Command (NA VSEA). In his current capacity he is a member of the Surface Ship Hydrodynamics Branch and is the divisional coordinator for computer supported design (CSD) technical director for the hull form design system (HFDS) Hull Engineering Group (SEA 55) assistant coordinator for CSD SEA 55 CSD coordinator for the DDG-51 contract design and SEA 55W3 project engineer for aircraft carrier/aviation support ship hydrodynamics. Mr. Hough received his B.S.E. degree in naval architecture and marine engineering in 1978 and his M.S.E. degree in naval architecture and marine engineering in 1979 from the University of Michigan. He began his career with the U.S. Navy in 1979 as an Engineer-in-Training in the Ship Design and Integration Directorate of NAVSEA. Prior to his current assignment Mr. Hough was the technical director responsible for the hull form and hydrodynamics energy conservation program and technical specialist for design practices for resistance and powering margins and hull form geometry. A member of ASNE since 1979 Mr. Hough is also a member of SNAME ASE and the U.S. Naval Institute. Allen H. Engleis a naval architect with the Hull Form Design and Performance Division of the Naval Sea Systems Command. He received his B.S. degree in engineering science from th

To meet energy conservation goals of the U.S. Navy, its attention has been focused on ways to reduce individual ship total resistance and powering requirements. One possible method of improving ship powering characteristics is by modifying existing individual ship hulls with the addition of bulbous bows. This paper will identify the merits of retrofitting bow bulbs on selected U.S. Navy auxiliary and amphibious warfare ships. A procedure for performing a cost-benefit analysis will be shown for candidate ship classes. An example of this technique for an amphibious warfare ship will also be provided. A brief discussion of future methods to be used for bulbous bow design such as application of systematic model test data and numerical hydrodynamic techniques will be given.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form design system (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Repair of TMI-1 OTSG tube failures. Use of a kinetic tube-expansion process to resesal tubes within the upper tube sheet provides a cost-effective and relatively low-expousure repair process

引用

Process Safety Progress 1983年第3期2卷 173-175页

作者： David G. Slear Robert L. Long James D. Jones F. S. Giacobbe GPU Nuclear Parsippany N.J. 07054 In 1974 David Slear joined General Public Utilities Nuclear Corp. where his responsibilities included the design review of components for new nuclear power plants and troubleshooting component failures both in nuclear power and fossil plants in the GPU System. In 1978 he was promoted to Preliminary Engineering Manager and was responsible for coordinating the preparation of design criteria for several coal-fired plants and combustion turbines to be installed throughout the 1980s. Immediately following the TMI-2 accident he was placed in charge of coordinating the establishment of criteria and the design for numerous modifications that were perceived to be required in order to maintain core cooling and a stable safe shutdown condition for the TMI-2 reactor. Subsequently he was promoted to Manager of TMI Engineering Projects which involved establishing the criteria and coordinating the engineering for the numerous modifications required to TMI-1 as a result of the Lessons Learned from the accident at TMI-2. He holds a B.S. Degree in Mechanical Engineering and an M.S. Degree in Mechanical Engineering. Since April 1982 Robert L. Long has been Vice President and Director of the Nuclear Assurance Division of the GPU Nuclear Corp. This includes responsibilities for the Quality Assurance Department the Nuclear Safety Assessment Department the Training & Education Directorate and the Emergency Preparedness Department. Joining GPU in 1978 he has been actively involved with Three Mile Island recovery and restart activities since the spring of 1979. From February 1980 through March 1982 he served as Director–Training & Education for GPU Nuclear. He holds the B.S. degree in Electrical Engineering from Bucknell University and the M.S.E. and Ph.D. degrees in Nuclear Engineering from Purdue University. He has written numerous publications and has presented lectures on “energy and the environment” issues all over the United States and in Southeast Asia. Since joining GPU Nuclear Corpo

来源：评论

学校读者我要写书评

暂无评论

WATERFRONT CORRECTIVE ACTION PROGRAM (WCAP) - PILOT SHIPYARD PROJECT - RESOLVING EMI PROBLEMS IN CONJUNCTION WITH THE SHIP OVERHAUL PROCESS - EMI TRILOGY .2.

引用

NAVAL ENGINEERS JOURNAL 1982年第1期94卷 41-46页

作者： WINTER, DB CARSTENSEN, RV Mr. Dale B. Winter:was graduated from the University of Washington in 1979 with a Bachelor of Science in Electrical Engineering. He began his professional career at Puget Sound Naval Shipyard in the Radar Systems installation design division of the Electronics Application Branch. Mr. Winter is currently assigned lead responsibility for the Pilot Shipyard EMI Control project at Puget Sound Naval Shipyard. Mr. Russell V. Carstensen:was graduated from the University of Washington in 1968 with a Bachelor of Science in Electrical Engineering. He began his professional career at Puget Sound Naval Shipyard as a radar system installation designer and eventually was assigned as Project Engineer for Radio Communication and Navigation Systems. His current position is General Manager of Electromagnetic Technology Inc. headquartered in Springfield VA. Mr. Carstensen is the author of numerous technical papers topics covering a wide spectrum on various aspects of shipbuilding and repair. Several of these papers have been published in theNaval Engineers Journal.He is also a member of ASNE and served as chairman of the ASNE sponsored symposium on shipbuilding and repair which was held in Seattle in September 1981. Mr. Carstensen is a registered engineer in the state of Washington.

This paper begins with a discussion of activities toward institutionalization of the control of electromagnetic interference (EMI) during the ship overhaul through the Pilot Shipyard portion of WCAP. The discussion covers such practices as development of training and awareness material, development of standardized documentation to support shipyard activities, establishment of individual ship files of known problems, provision of technical assistance to other shipyards in the resolution of known EMI problems and investigation and development of new installation techniques and processes to insure an extended life span for EMI control hardware installed on board ship. This is in turn followed by a discussion of improvement in pre-overhaul planning, improvements in existing specifications and standards, the development of model studies and improvements in ships force maintenance procedures to insure that the improvements in overhaul techniques are adopted as a routine institutionalized method.

关键词：

来源：评论

学校读者我要写书评

暂无评论

ADVANCES IN LONG-RANGE, HIGH-SPEED OPTICAL COMMUNICATION

引用

NAVAL ENGINEERS JOURNAL 1981年第4期93卷 39-48页

作者： BARTON, GG FELDMAN, S Mr. Sidney Feldman formerly with the Naval Applied Science Laboratory is presently with the Radiation Division of the Naval Surface Weapons Center White Oak Silver Spring Maryland. He planned and supervised laboratory experiments of many optical systems for fleet evaluation several of his designs now being standard in the fleet. He received his BA degree in Physics from Brooklyn College in 1941 and majored in Physics at the Brooklyn Polytechnic Institute. His professional memberships include the Optical Society of America American Association for the Advancement of Science and The Scientific Research Society of North America. He was the recipient of the Naval Ordnance Development Award in 1945 the Superior Achievement Award in 1957 the Quality Salary Increase Award in 1965 the Superior Accomplishment Award in 1967 1970 and 1979. Additionally he has been granted patents for a relamping tool for searchlights (1962) a lamp positioning mechanism for searchlights (1963) a daylnight digital sextant (1973) a portable sextant-computer system (1974) and with Mr. George Barton the remote-controlled LLLTV camera-sextant (1976) the automatic passive LLLTV-rangefinder (1977) and a patent disclosure for the omnidirectional transceiver (1980). Mr. George G. Barton has been employed by the Naval Research Laboratory Washington D. C. for the past ten years in the scientific and military application design engineering and fabrication of low light level TV camera systems. He was previously associated with the Smithsonian Institution and Northwestern University in the application of TV technology in astronomical investigations. He attended New York University Newark College of Engineering and New Mexico State University where he majored in Physical Optics. Presently he is with his own company BISMARC Inc. Harker's Island N.C. where he is involved principally in the design manufacture and marketing of sonar systems such as the unique VIDISEA fishscope research and development in electrooptic systems an

During periods of radio silence under Emission Control, communication depends on the slow ship-to-ship, manual-visual, 8-10 wpm Morse code signaling shutter searchlight employing the ac 1000-watt incandescent or the ac 1000-watt compact arc mercury-xenon lamp. These sources can be replaced by the dc compact arc xenon lamp to provide longer daylight ranges and highspeed (100 wpm teletype, 150 wpm Morse code, voice, etc.) communication since this source has superior brightness and the facility of considerably more rapid modulation. The excessive weight and size of the ac-dc power convertor and modulating circuitry which had prevented use of the dc xenon lamp have been overcome by developments in solid state electronics such as the rapid, high current, simmer-flash, 100 to one light output xenon lamp pulsing using the reliable, uncomplicated, low-cost silicon controlled rectifier shunt switch which could eliminate the mechanical signaling shutter. Laboratory and sea evaluations have proved the feasibility of and provided the long daylight high-speed optical communication ranges that could be attained from operation of the dc 1000-watt and 2200-watt xenon lamps at the focus of 12-inch, 18-inch searchlights and in the Fresnel lens omni-directional beacon which a command ship uses to signal all ships in a task force at once. With these advances, optical communication provides the highspeed capability of radio communication, particularly, also, with the new omnidirectional transceiver.

关键词： SHIPS

来源：评论

学校读者我要写书评

暂无评论

COMPUTER AIDS FOR SHIP design, INTEGRATION AND CONTROL

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 73-87页

作者： CARLSON, CM JOHNSON, RA HELMING, FW Mr. Craig M. Carlson received his B.S. degree in Naval Architecture and Marine Engineering from the University of Michigan in 1970 and began his career with the Department of the Navy at the Naval Ship Engineering Center (NAVSEC). In 1972. he returned to the University of Michigan under the NAVSEC Long Term Training Program and received his M.S. degree in Naval Architecture and Marine Engineering. After returning to the Ship Arrangements Branch at NAVSEC. he was assigned as Task Leader for General Arrangements for the PGG PCG PHM. and MCM ship designs and was awarded Outstanding Performance Awards in 1974 and 1975. In addition he was Manager of the Arrangement Subsystem of the Navy's Computer-Aided Ship Design and Construction Program (CASDAC). In October 1979. he became Manager of the CASDAC Hull Design System. Currently. he also is enrolled in the M.S. of Computer Science Program at Johns Hopkins University. Mr. Carlson previously has presented technical papers at ASNE Day 1974 and 1978 as well as at the 1979 DOD Manufacturing Technology Advisory Group Conference. Besides ASNE. which he joined in 1972. he is a member of SNAME. ASE. and the U.S. Naval Institute. Mr. Robert A. Johnson is a Naval Architect in Surface Combatants Design (SEA 03D3). Ship Design Integration Directorate Naval Sea Systems Command. He received an Associate in Engineering degree in Drafting and Design Technology in 1959. his B.S. degree in Aerospace Engineering in 1965. and his M.S. degree in Engineering Mechanics in 1970. all from the Pennsylvania State University. In 1973. he was selected for the NA VSEC Hull Division s Long Term Training Program at the University of Michigan subsequently receiving his M.S.E. degree in Naval Architecture in 1974. Mr. Johnson began his career with the Ordnance Research Laboratory at Pennsylvania State University in 1959 where he worked. on the design of hydroelastic submarine models and conducted research in the area of flow induced structural vibrations. In 1967 he joined HRB-Singer at State Colle

This paper presents an integrated approach to Computer-Aided Ship design for U.S. Navy preliminary and contract design. An integrated Hull design system (HDS), currently under development by the Hull Group of the Naval Sea systems Command (NAVSEA 32). is the vehicle for the discussion. This paper is directed toward practicing ship design professionals and the managers of the ship design process. Primary emphasis of this paper, and of the development effort currently under way, is on aiding ship design professionals in their work. Focus is on integration and management control of the extremely complex set of processes which make up naval ship design. The terminology of the Ship designer and design Manager is used. The reader needs no familiarity with the technologies of computer science.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：