检索结果-内蒙古大学图书馆

第三十八届中国控制会议

作者： Xia Zhang Ding Liu Fei Yu National and Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xian University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing

The practicality of model predictive control(MPC) is partially limited by its ability to solve optimization problems in real time. The robust model prediction algorithm based on linear matrix inequality is divided into online and offline parts. In order to improve the response speed and control precision of the system, the upper bound of the objective function obtained by the off-line algorithm is taken as a known quantity, and a series of large asymptotically stable invariant elliptic sets are obtained by re-optimization. The state variables can be determined-lying between two ellipsoid sets within the ellipsoid set sequence, on the basis of online measured state variables. By adding an adjacent small ellipse set, the state variables are precisely located by three ellipse sets optimization, and the system control quantity is obtained. The simulation results show that this algorithm is better than the traditional algorithm. Finally, this algorithm is applied to identify parameters of silicon single crystal thermal field temperature model and the simulation results prove its excellent ability of parameters identification.

关键词： Robust optimization Model predictive control Uncertainty Online optimization

来源：评论

学校读者我要写书评

暂无评论

ICP algorithm point cloud registration method based on a new improved Harris Hawk algorithm

ICP algorithm point cloud registration method based on a new...

引用

Chinese Automation Congress (CAC)

作者： Chen Wang Shangbin Jiao Rui Gao Yuxing Li School of Automation and Information Engineering Xi’an University of Technology Xi’an China School of Automation and Information Engineering Xi’an University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an China School of Electronic & Electrical Engineering Baoji University of Arts and Sciences Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology China

ISBN: (纸本)9781665426480

To address shortcomings of ICP algorithm, which is sensitive to the initial position and easy to fall into local optimum, we propose a Harris Hawks Optimizer (HHO) point cloud registration method combining PCA preprocessing and parallel population initialization. The PCA method is used to align the point clouds with the main axes and perform the main axes correction. Since the six input variables in the population initialization stage of HHO point cloud registration are different and independent, the initial population of HHO algorithm is initialized by the parallel initialization method. The results show that the improved algorithm is able to successfully overwhelm the fault of ICP algorithm, and its global seek performance and optimization accuracy are more advantageous, and the algorithm operates efficiently, with high registration accuracy and robustness.

关键词： Point cloud compression Automation Input variables Sociology Robustness Statistics Optimization

来源：评论

学校读者我要写书评

暂无评论

Optimization design of superconducting cusp magnetic field structure

Optimization design of superconducting cusp magnetic field s...

引用

IEEE Conference on Industrial Electronics and Applications (ICIEA)

作者： Jiao Shangbin Hou Dongbin Liu Ding Huang Weichao Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an China National & Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an China

Based on the analysis of the Cusp magnetic field suppression convection principle, the simulation model of superconducting Cusp magnetic field is built by the finite element method. In the case of satisfying the magnetic field strength of the crucible wall and giving the excitation current, the number of layers of the superconducting coil is calculated by using the established model. The influence of coil spacing, thickness of shielding thickness, horizontal distance between coil and shielding thickness and longitudinal distance on magnetic induction strength, horizontal distance and longitudinal distance between coil and the shielding are analyzed under the condition that the number of superconducting coils is constant. The influence of the force on the coil, the influence of the thickness of the shielding body on the magnetic leakage strength of the magnetic field. The simulation results show that the optimized Cusp magnetic field structure parameters can be used in the actual design.

关键词： Magnetic fields Convection Crystals Magnetic shielding Magnetic noise Superconducting magnets Silicon

来源：评论

学校读者我要写书评

暂无评论

Echo state network based symbol detection in chaotic baseband wireless communication

arXiv

引用

arXiv 2021年

作者： Yin, Hui-Ping Bai, Chao Ren, Hai-Peng The Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an710048 China The Xi’an Key Laboratory of Intelligent Equipment Xi’an Technological University Xi’an710021 China

In some Internet of Things (IoT) applications, multipath propagation is a main constraint of communication channel. Recently, the chaotic baseband wireless communication system (CBWCS) is promising to eliminate the inter-symbol interference (ISI) caused by multipath propagation. However, the current technique is only capable of removing the partial effect of ISI, due to only past decoded bits are available for the suboptimal decoding threshold calculation. However, the future transmitting bits also contribute to the threshold. The unavailable future information bits needed by the optimal decoding threshold are an obstacle to further improve the bit error rate (BER) performance. Different from the previous method using echo state network (ESN) to predict one future information bit, the proposed method in this paper predicts the optimal threshold directly using ESN. The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by removing the threshold calculation from the transmitting symbols and channel information, which achieves better BER performance as compared to the previous method. The reason for this superior result lies in two folds, first, the proposed ESN is capable of using more future symbols information conveyed by the ESN input to get more accurate threshold;second, the proposed method here does not need to estimate the channel information using Least Square method, which avoids the extra error caused by inaccurate channel information estimation. By this way, the calculation complexity is decreased as compared to the previous method. Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel, show the effectiveness and superiority of the proposed method. Copyright © 2021, The Authors. All rights reserved.

关键词： Bit error rate

来源：评论

学校读者我要写书评

暂无评论

Design and Performance Analysis of a Chaotic Pseudo Orthogonal Carriers Multi-Access Communication system

arXiv

引用

arXiv 2021年

作者： Bai, Chao Yao, Jun-Liang Sun, Yu-Zhe Ren, Hai-Peng Xi’an Key Laboratory of Intelligent Equipment Xi’an Technological University Xi’an710021 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an710048 China

A Chaotic Pseudo Orthogonal Carriers Multi-Access (CPOCMA) communication based on Chaotic Pseudo Orthogonal Shape-forming Filter (CPOSF) bank, Chaotic Pseudo Orthogonal Matched Filter (CPOMF) bank and Chaotic Pseudo Orthogonal Correlation Filter (CPOCF) bank is proposed in this work. At the transmitter, the multiple CPOSFs are used to generate pseudo orthogonal signals. It provides a good trade-off between spectrum efficiency and high bit transmission rate. At the receiver, the CPOMF bank and CPOCF bank are used to maximize the Signal-to-Noise Ratio (SNR) and extract the received information from each sub-channel, respectively. The received signal is demodulated by averaging the sampled sequence from the matched filter bank output and sorting the sampling sequence from the CPOCF bank output to recover the transmitted information bits. The proposed CPOCMA communication system not only offers multiuser access with high reliability and high data transmission rate, but also achieves higher spectrum efficiency. Analytical Bit Error Rate (BER) expression is derived. The proposed communication system performance has been evaluated in Additive White Gaussian Noise (AWGN) channel and wireless channel by both numerical simulations and experiments based on a Wireless open-Access Research Platform (WARP), the results show the effectiveness and the superiority of the proposed method. Copyright © 2021, The Authors. All rights reserved.

关键词： Numerical methods

来源：评论

学校读者我要写书评

暂无评论

Optimization of Extreme Learning Machine Based on Improved Beetle Antennae Search for Slot Die Coating Prediction

Optimization of Extreme Learning Machine Based on Improved B...

引用

Chinese control and Decision Conference, CCDC

作者： Haonan Yang Ding Liu Jun-Chao Ren Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an University of Technology Xi'an China

In the actual production of slot die coating, the minimum coating thickness and the maximum substrate moving speed could only be judged by production experience, and there was no accurate prediction model due to the nonlinear characteristics of fluid motion. Therefore, building a reasonable and efficient prediction model for slot die coating is now an urgent and challenging task. In this paper, an optimized extreme learning machine (ELM) based on improved beetle antennae search (IBAS) algorithm is proposed for slot die coating prediction. The optimized ELM model can well learn the nonlinear characteristics of the system and make accurate predictions, thus solving the traditional inaccurate empirical judgment. As the prediction accuracy of ELM depends on the selection of weights and biases, the IBAS optimization algorithm is used to quickly search for the optimal value of weights and biases in the ELM network. IBAS algorithm improves the generation mechanism of antennae on the basis of the original algorithm, so that the algorithm can converge quickly. At the same time, the search strategy of the algorithm is improved to avoid falling into the local optimal solution. By predicting the production data of slit coating, the feasibility and effectiveness of IBAS-ELM model are proved.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Model predictive control of event triggering in silicon single crystal growth processes

Model predictive control of event triggering in silicon sing...

引用

Chinese Automation Congress (CAC)

作者： Yankai Li Biao Ren Ding Liu Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an China

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process.

关键词： Crystal growth Semiconductor device modeling Computational modeling Photonic crystals Predictive models Prediction algorithms Silicon

来源：评论

学校读者我要写书评

暂无评论

A fault isolation method using kernel canonical variate analysis-based contribution

A fault isolation method using kernel canonical variate anal...

引用

第35届中国过程控制会议

作者： Hongxin Wang Lingxia Mu Nan Feng Han Liu Ding Liu Department of Information and Control Xi'an University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an University of Technology School of Intelligence Science and Technology University of Science and Technology Beijing

Fault diagnosis and isolation is important for industrial system. In this paper, a kernel canonical variate analysis(KCVA) is proposed for fault isolation. KCVA is originally used as a data dimension reduction technique which can account for nonlinearity and correlations in the industrial dynamical process data. But there are some difficulties using KCVA in the construction of the contribution for the fault isolation. On the one hand, it is difficult to compute the contributions of individual variables because it is scarcely possible to find an inverse mapping from the feature space to the original space. On the other hand, a smearing effect is hardly avoided. To solve the problem, a KCVA-based contributions is proposed using the state subspace and the residual subspace which can isolate the faulty variables effectively. Simulations are conducted on the Tennessee Eastman process to verify the performance of the proposed method.

关键词： Kernel canonical variate analysis contribution plot fault isolation

来源：评论

学校读者我要写书评

暂无评论

Multi-carrier Differential Chaos Shift keying Wireless Communication Based On Chaotic Shape-forming Filter

Multi-carrier Differential Chaos Shift Keying Wireless Commu...

引用

Chinese Automation Congress (CAC)

作者： Hai-Peng Ren Si-Long Guo Chao Bai Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an China School of Mechatronic Engineering Xi’an Technological University Xi’an China

In recent years, chaotic communication has shown advantages, such as used the simplest matched filter to make signal-to-noise ratio (SNR) maximization and improve the resistance to multi-path interference. The chaotic shape-forming filter (CSF) has been proposed to generate the chaotic baseband signal in the wireless communication, the additional advantage of the chaotic shape-forming filter is able to generate the chaotic signal as spread sequence in Differential Chaotic Shift key (DCSK), which encodes information in the sequence. In this paper, the chaotic signal generated by CSF is used in DCSK and combined with multi-carrier frequency to improve the bit transmission rate. Because of CSF used, it helps to improve both Bit Error Rate (BER) performance and provide an additional information flow in the spread sequence itself. Simulation results indicate that the proposed method is superior to other methods over the Addition White Gaussian Noise (AWGN) channel and wireless channel.

关键词： Chaotic communication Signal to noise ratio Wireless communication Simulation Demodulation Data communication

来源：评论

学校读者我要写书评

暂无评论

Effect of Annealing Process Parameters on N-Gaas Ohmic Contacts

SSRN

引用

SSRN 2021年

作者： Lin, Tao Xie, Jianan Ning, Shaohuan Ma, Zekun Mu, Yan Sun, WanJun Yang, Sha Department of Electronic Engineering Xi'an University of Technology Xi'an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Shaanxi Xi’an710048 China

Ni/Ge/Ni/Au multi-layer metal electrodes were prepared on N-GaAs substrate by electron-beam evaporation to investigate the effect of annealing process parameters on N-GaAs ohmic contacts. In the annealing temperature range of 370 °C to 430 °C, the metal-semiconductor contact was found changing from Schottky contact to ohmic contact as the annealing temperature was above 380 °C. Specific contact resistivity of n-GaAs samples firstly decreased and then increased with the increasing of annealing temperature, and the minimum specific contact resistivity of 3.3×10 -5 Ω·cm 2 was formed at 420 °C annealing for 80 s. Although the specific contact resistivity of the metal-semiconductor contact performed satisfactorily, the surface morphology of the n-GaAs metal electrode was found having metal shrinkage after annealing. The formation mechanism of ohmic contact was qualitatively explained by the elements diffusion under different annealing parameters, which were confirmed by the comparative analysis of SEM and EDX results. © 2021, The Authors. All rights reserved.

关键词： Gallium arsenide

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：