检索结果-内蒙古大学图书馆

22nd IEEE International Conference on Industrial Informatics, INDIN 2024

作者： Ren, Cheng Chen, Cailian Zhu, Shanying Ma, Yehan Guan, Xinping Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China

ISBN: (纸本)9798331527471

Flight control system testing (FCST) is one of the most important testing during aircraft final assembly, however, traditional testing method highly rely on manual labor, resulting in low testing quality and efficiency. Targeting at improving the testing quality and efficiency, in this paper, we apply digtial twin (DT) technology in the FCST process for the first time. A virtual experimental platform named DT-FCST is constructed which is identical to a real wing experimental platform, supporting testing elements management and physical-virtual mapping experiments. The development process of the DT-FCST platform is detailed. Several experiments are conducted to demonstrate the effectiveness of DT technology. Based on motion scripts integrating real-time data from the cockpit, the cockpit control sticks and flight control surfaces are driven to achieve consistency between physical and virtual motions. With the help of DT technology, the entire movement process of control sticks and flight control surfaces are mapped with high fidelity in the DT-FCST platform, greatly enhancing the testing efficiency and monitoring quality. © 2024 IEEE.

关键词： Cockpits (aircraft)

来源：评论

学校读者我要写书评

暂无评论

Vision Based Deflection Angle Measurement of Flight control Surfaces in Aircraft Testing 22

Vision Based Deflection Angle Measurement of Flight Control ...

引用

22nd IEEE International Conference on Industrial Informatics, INDIN 2024

作者： Xu, Jiaxin Ren, Cheng Chen, Cailian Ma, Yehan Guan, Xinping Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China

ISBN: (纸本)9798331527471

During the flight control system testing (FCST), it is crucial to accurately measure the deflection angles of flight control surfaces to determine whether they respond precisely to commands. However, the traditional measurement method, which relies on the manual use of angle measuring rulers for inspections, is inefficient, prone to wear, and lacks precision. To address this issue, we introduce a vision-based angle measurement method for FCST that replaces manual measurements, thereby significantly enhancing testing efficiency and accuracy. Our proposed triangular mesh alignment based angle measurement algorithm (TMA-AM) is a non-contact measurement method that involves two key procedures, capturing 3D coordinates from images and calculating deflection angles. The TMA-AM algorithm converts deflected angles into angular differences between two coordinate systems, while accounting for the curved characteristics of control surfaces. We evaluate TMA-AM algorithm on a 3D-printed wing test platform and an aircraft wing test platform. Experimental results demonstrate that our method achieves high accuracy, with an average angular measurement error below 0.05◦ © 2024 IEEE.

关键词： Mesh generation

来源：评论

学校读者我要写书评

暂无评论

A Probabilistic Topology Inference Method for Networked Dynamical system via Single Excitation 63

A Probabilistic Topology Inference Method for Networked Dyna...

引用

63rd IEEE Conference on Decision and control, CDC 2024

作者： Jiao, Qing Li, Yushan He, Jianping Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Dept. of Automation Shanghai China

ISBN: (纸本)9798350316339

A growing number of works have investigated inferring the topology of networked dynamical systems from observations, such as to better understand the system behaviour. Despite the tremendous advances, most of them require the observations to be abundant. This paper focuses on inferring the topology by injecting single excitation on a node and collecting several steps of noisy observations. The problem is challenging because the noises cannot be depressed in several observations and are mixed with the injected excitation, making it hard to directly reveal the topology. To practice, we develop a probabilistic method based on the hypothesis test framework. First, we infer the neighbors that are within h-hop of the excited node and derive the accuracy guarantees. Then, we extend the method to infer the exact h-hop neighbors. A computable lower bound for the accuracy probability is established to provide confidence support in the inference procedures. Furthermore, we give the conditions of excitation input to ensure a desired inference probability, which provides guidance for the input design. Numerical simulations are conducted to verify the effectiveness of the proposed method. © 2024 IEEE.

关键词： Network topology

来源：评论

学校读者我要写书评

暂无评论

Skewed Pins Detection of Aviation Connectors Based on Multi-Modal Cooperative Perception

Skewed Pins Detection of Aviation Connectors Based on Multi-...

引用

2024 International Conference on Artificial Intelligence of Things and systems, AIoTSys 2024

作者： Li, Jiaming Ren, Cheng Xu, Jiaxin Wang, Yao Xu, Hanlin Guan, Xinping Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Department of Automation Shanghai200240 China

ISBN: (纸本)9798331507886

Aviation electrical connectors are critically important components in electrical wiring interconnection systems. Currently, connector defect detection relies entirely on manual inspection, which is error-prone and time-consuming. Due to the unique structural characteristics of aviation connectors, single-modality sensors often struggle to simultaneously detect both pins and holes. To address this issue, we propose a 3D skewed pins detection (3D-SPD) algorithm that integrates both 2D and 3D modals features. Due to the low quality of the raw connector data, we propose a connector point cloud enhancement (CPCE) algorithm that combines multi-view point clouds for point cloud fusion enhancement. Based on enhanced data, we perform skewed pin detection. Experimental results indicate that CPCE and 3D-SPD are effective in detecting skewed pins, achieving an accuracy rate exceeding 99%. Our algorithm can be deployed as an AI assistant on the edge device for the skewed pin detection. © 2024 IEEE.

关键词： defect detection machine vision multi-modal cooperative perception skewed pin

来源：评论

学校读者我要写书评

暂无评论

An Improved Method for Approximating the Infinite-Horizon Value Function of the Discrete-Time Switched LQR Problem

引用

Journal of systems Science & complexity 2024年第1期37卷 22-39页

作者： HOU Tan LI Yuanlong LIN Zongli Department of Automation Shanghai Jiao Tong UniversityShanghai 200240China Key Laboratory of System Control and Information Processing Ministry of Education of ChinaShanghai 200240China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai 200240China Charles L.Brown Department of Electrical and Computer Engineering University of VirginiaCharlottesvilleVA 22904-4743USA

This paper considers the problem of approximating the infinite-horizon value function of the discrete-time switched LQR *** particular,the authors propose a new value iteration method to generate a sequence of monotonically decreasing functions that converges exponentially to the value *** method facilitates us to use coarse approximations resulting from faster but less accurate algorithms for further value iteration,and thus,the proposed approach is capable of achieving a better approximation for a given computation time compared with the existing *** numerical examples are presented in this paper to illustrate the effectiveness of the proposed method.

关键词： Optimal control switched linear systems switched LQR problem.

来源：评论

学校读者我要写书评

暂无评论

Model predictive control of event triggering in silicon single crystal growth processes

Model predictive control of event triggering in silicon sing...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Li, Yankai Ren, Biao Liu, Ding Xi'An University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an710048 China

ISBN: (纸本)9781665465335

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process. © 2022 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Simulation study on control characteristics of semiconductor grade monocrystalline silicon growth process

Simulation study on control characteristics of semiconductor...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Liu, Yuyu Liu, Ding Song, Zezhong Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi`an University of Technology Xi'an710048 China

ISBN: (纸本)9781665465335

The growth of Czochralski(CZ) monocrystalline silicon is a nonlinear dynamic time-varying system with complex physical changes and multi-field and multi-phase coupling. In order to meet the needs of information development, it is urgent to develop large-scale, high-quality monocrystalline silicon. However, it is extremely difficult to establish an accurate control system model. Therefore, this paper considers the complex physical changes of multi-field coupling and non-linear processes in the growth of CZ monocrystalline silicon, a lumped parameter model for the growth of monocrystalline silicon is established based on energy balance model, fluid mechanics model, and geometry model, according to the internal mechanism of the monocrystalline silicon growth and the transfer mechanism of internal material flow. According to the model, a CZ monocrystalline silicon growth simulation control system is established under the Matlab/Simulink environment, and the real-time simulation data of each state variable of crystal growth is obtained. So that the control characteristics of each state variable in the crystal growth process can be analyzed. Finally, the validity of the established model is checked by the records evaluation of the semiconductor industry production process. Finally, the validity of the established model is verified based on the data analysis of the semiconductor industry production process. The results show that the model has high accuracy and can better describe the dynamic behavior of the actual monocrystalline silicon growth system. © 2022 IEEE.

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

State-of-Charge Balancing control for Battery Energy Storage systems of Near-Space Vehicles with an Electric-Thermal-Aging Coupling Model 42

State-of-Charge Balancing Control for Battery Energy Storage...

引用

42nd Chinese control Conference, CCC 2023

作者： Zuo, Zhiqiang Du, Yunhao Wang, Yijing Zhang, Zhicheng Li, Peng School of Electrical and Information Engineering Tianjin Key Laboratory of Intelligent Unmanned Swarm Technology and System Tianjin University Tianjin300072 China Ministry of Education Key Laboratory of System Control and Information Processing Shanghai200240 China

ISBN: (纸本)9789887581543

State-of-charge (SoC) balancing is crucial for improving the efficiency and lifetime of the battery energy storage system in near-space vehicles. In this paper, the SoC balancing control problem is investigated by a coupling battery model with electric-thermal-aging dynamics. Firstly, a system identification experiment is carried out to obtain the internal parameters of the battery. Secondly, a weight optimization index is designed by integrating the balancing speed and battery state-of-health (SoH). Then, a receding horizon control algorithm is proposed to realize multi-unit battery SoC balancing with partial swarm optimization (PSO). Finally, the effectiveness of the proposed strategy is verified by simulation results. © 2023 Technical Committee on control Theory, Chinese Association of Automation.

关键词： Battery management systems

来源：评论

学校读者我要写书评

暂无评论

Online Identification of Boost Converter Components with Multiple Updating RLS Algorithm 42

Online Identification of Boost Converter Components with Mul...

引用

42nd Chinese control Conference, CCC 2023

作者： Zhou, Tong Zhang, Zhicheng Zuo, Zhiqiang Wang, Yijing Li, Peng School of Electrical and Information Engineering Tianjin Key Laboratory of Intelligent Unmanned Swarm Technology and System Tianjin University Tianjin300072 China Key Laboratory of System Control and Information Processing Ministry of Education Shanghai200240 China

ISBN: (纸本)9789887581543

In this paper, component parameters of the boost converter are identified online using a multiple updating recursive least squares (MURLS) algorithm. The component parameters, such as resistance, inductor inductance and capacitor capacitance, are obtained directly through the identification procedure rather than transfer function coefficients. The MURLS algorithm is applied to improve the rapidity of system identification compared to the traditional recursive least squares (RLS) algorithm, which is verified by a comparative simulation between MURLS and RLS and the simulation of a load-switching scenario. © 2023 Technical Committee on control Theory, Chinese Association of Automation.

关键词： Parameter estimation

来源：评论

学校读者我要写书评

暂无评论

Motor Fault Diagnosis Under complex Working Conditions Based on Signal Fusion and CA-CNN

Motor Fault Diagnosis Under Complex Working Conditions Based...

引用

2024 China Automation Congress, CAC 2024

作者： Cai, Mingxuan Liu, Qi Liu, Yuxiang Yang, Bo Department of Automation Shanghai Jiao Tong University shanghai China Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai China

ISBN: (纸本)9798350368604

Accurate fault diagnosis plays a key role in the safe and efficient operation of electrical motors. Aiming at multi-class motor fault diagnosis under complex working conditions, a signal fusion-based fault diagnosis framework is proposed. Measurement parameters from different sensors are first transformed by wavelet denoising and fast Fourier transform (FFT). Then, multiple parameters spectrum and working condition information are integrated and converted into high-dimension matrices. Finally, a channel-attention-based convolution neural network (CA-CNN) is proposed to extract fault patterns from a reconstructed matrix and output diagnosis results. Experiment results on both simulated and experimental datasets verify the effectiveness of the proposed method. © 2024 IEEE.

关键词： Convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：