检索结果-内蒙古大学图书馆

2019 IEEE International Conference on Electrical, control and Instrumentation Engineering, ICECIE 2019

作者： Ren, Hai-Peng Nan, Zi-Yuan Li, Jie Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'An University of Technology Xi'an China Xi'An University of Technology Department of Electrical Engineering Xi'an China

ISBN: (纸本)9781728139395

Position sensors in permanent magnet synchronous motor (PMSM) are restrained in some applications because of the space restriction and the reliability of the system. A marginalized particle filter (MPF) can used to staminate the speed of the motor by combining a Kalman filter (KF) with a particle filter (PF). In the MPF algorithm, the rotor position of the permanent magnet synchronous motor (PMSM) is represented by a set of particles, and the rotor speed associated with each particle is estimated by using the KF. The PF here is used to handle the non-Gaussianity and nonlinearity of the system. In this paper, the uniform distribution of particles is proposed to replace the traditional Gaussian distribution of particles in the PF to get better performance at the low-speed range. The motor drive system prototype is built using a TMS320F28335 digital signal processor as a controller core. The proposed improved PF is used in the sensorless speed vector control PMSM system. The experimental results show that the proposed PF with a uniform distribution of initial particles enables more accurate speed estimation in the low-speed range compared to the conventional Gaussian distribution, while increasing number of particles also helps to improve the accuracy. © 2019 IEEE.

关键词： Kalman filters

来源：评论

学校读者我要写书评

暂无评论

HRPose: Real-Time High-Resolution 6D Pose Estimation Network Using Knowledge Distillation

引用

Chinese Journal of Electronics 2023年第1期32卷 189-198页

作者： GUAN Qi SHENG Zihao XUE Shibei Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management

Real-time six degrees-of-freedom(6D)object pose estimation is essential for many real-world applications, such as robotic grasping and augmented reality. To achieve an accurate object pose estimation from RGB images in real-time, we propose an effective and lightweight model, namely high-resolution 6D pose estimation network(HRPose). We adopt the efficient and small HRNetV2-W18 as a feature extractor to reduce computational burdens while generating accurate 6D poses. With only 33% of the model size and lower computational costs, our HRPose achieves comparable performance compared with state-of-the-art models. Moreover, by transferring knowledge from a large model to our proposed HRPose through output and feature-similarity distillations, the performance of our HRPose is improved in effectiveness and efficiency. Numerical experiments on the widely-used benchmark LINEMOD demonstrate the superiority of our proposed HRPose against state-of-the-art methods.

关键词： Knowledge engineering Computational modeling Pose estimation Grasping Benchmark testing Feature extraction Real-time systems

来源：评论

学校读者我要写书评

暂无评论

Soft Robotics:Morphology and Morphology-inspired Motion Strategy

引用

IEEE/CAA Journal of Automatica Sinica 2021年第9期8卷 1500-1522页

作者： Fan Xu Hesheng Wang Department of Automation Institute of Medical RoboticsKey Laboratory of System Control and Information Processing of Ministry of EducationShanghai Jiao Tong UniversityShanghai 200240China Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Jiao Tong UniversityShanghai 200240China

Robotics has aroused huge attention since the *** of the uniqueness that industrial applications exhibit,conventional rigid robots have displayed noticeable limitations,particularly in safe cooperation as well as with environmental ***,scientists have shifted their focus on soft robotics to apply this type of robots more effectively in unstructured *** decades,they have been committed to exploring sub-fields of soft robotics(e.g.,cutting-edge techniques in design and fabrication,accurate modeling,as well as advanced control algorithms).Although scientists have made many different efforts,they share the common goal of enhancing *** presented paper aims to brief the progress of soft robotic research for readers interested in this field,and clarify how an appropriate control algorithm can be produced for soft robots with specific *** paper,instead of enumerating existing modeling or control methods of a certain soft robot prototype,interprets for the relationship between morphology and morphology-dependent motion strategy,attempts to delve into the common issues in a particular class of soft robots,and elucidates a generic solution to enhance their performance.

关键词： Soft continuum manipulator soft gripper soft mobile robot soft robot control method soft robot modeling method soft robotics

来源：评论

学校读者我要写书评

暂无评论

A detection and identification method based on CNN for laser point thermal radiation

A detection and identification method based on CNN for laser...

引用

2020 International Conference on Mechatronics Technology and intelligent Manufacturing, ICMTIM 2020

作者： Yang, Haichuan Xie, Ruidong Yi, Yingmin Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an University of Technology Xi'an710048 China Key Lab of Manufacturing Equipment of Shaanxi Province Xi'an University of Technology Xi'an710048 China

Aiming at the high demands of temperature and precision in the aspect of additive manufacturing, a method based on CNN was proposed for estimating measurement. The network was trained through the collected laser thermal radiation images for image recognition and isotherm estimation after modeling a CNN. The experimental conclusion verifies that the isotherm detection and temperature estimation of the laser point can be efficiently implemented in proposed method. © 2020 Institute of Physics Publishing. All rights reserved.

关键词： Isotherms

来源：评论

学校读者我要写书评

暂无评论

Model predictive control of event triggering in silicon single crystal growth processes

Model predictive control of event triggering in silicon sing...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Li, Yankai Ren, Biao Liu, Ding Xi'An University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an710048 China

ISBN: (纸本)9781665465335

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process. © 2022 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Improved Kalman Filtering Algorithm Based Multi-Sensor Integration for Silicon Single Crystal Growth Process 7

Improved Kalman Filtering Algorithm Based Multi-Sensor Integ...

引用

7th International Symposium on Autonomous systems, ISAS 2024

作者： Xie, Ruidong Zhu, Pei Ma, Wenle Zhang, Zheqi Yi, Yingmin Guo, Zheng Xi'an University of Technology Key Lab of Manufacturing Equipment of Shaanxi Province Xi'an710048 China Xi'an University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an710048 China

ISBN: (纸本)9798350363173

The study primarily delves into addressing the data filtering challenge inherent in the silicon single crystal growth process by proposing a multi-sensor integrated detection approach. This approach is designed to alleviate the diminished filtering accuracy resulting from the reliance on a single sensor and the conventional Kalman filtering algorithm. By utilizing an enhanced adaptive Kalman filtering algorithm and the maximum likelihood estimation criterion to incorporate the innovation variance directly into the gain calculation of the Kalman filter, dynamic adjustment of the estimation model is achieved while interference from system noise and measurement noise is reduced. Finally, simulation-based comparative experiments between the adaptive and conventional Kalman filtering algorithms are performed. The results show that the performance of the adaptive Kalman filtering algorithm is superior to that of the conventional Kalman filtering algorithm in terms of accuracy and stability when detecting signals from multiple sensors. The research findings furnish dependable data support for refining the decision-making process in crystal growth technology, augmenting the precision and scientific integrity of crystal safety production scheduling and decision-making endeavors. © 2024 IEEE.

关键词： Kalman filters

来源：评论

学校读者我要写书评

暂无评论

Study of multilevel feature weighted fusion based image classification method for silicon single crystal growth process

Study of multilevel feature weighted fusion based image clas...

引用

2024 International Conference on Image processing and Artificial Intelligence, ICIPAl 2024

作者： Xie, Ruidong Zhang, Zheqi Zhu, Pei Ma, Wenle Yi, Yingmin Key Lab of Manufacturing Equipment of Shaanxi Province Xi’an University of Technology Xi’an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an710048 China

ISBN: (纸本)9781510681514

A multi-level feature weighted fusion based image classification method for silicon single crystal growth process has been proposed to address the issue of the long silicon single crystal pulling times at industrial sites, which prevents timely understanding of the crystal growth process. A multi-level feature weighted fusion method was employed to identify and classify the growth process of silicon single crystals. A Czochralski single crystal silicon growth process recognition system was then designed. A comparison of the experimental results obtained from this design with the traditional single image classification method clearly showed that using different levels of silicon single crystal image information simultaneously effectively improved the accuracy of silicon single crystal growth image classification. © 2024 SPIE.

关键词： Image classification

来源：评论

学校读者我要写书评

暂无评论

A power optimization control method based on IMC for 3D printer

A power optimization control method based on IMC for 3D prin...

引用

2020 International Conference on Mechatronics Technology and intelligent Manufacturing, ICMTIM 2020

作者： Xie, Ruidong Yang, Haichuan Yi, Yingmin Key Lab of Manufacturing Equipment of Shaanxi Province Xi'an University of Technology Xi'an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an University of Technology Xi'an710048 China

Aiming at the effect of selective laser sintering technology used in 3D printing, the recursive least squares method was applied to fitting a control system model for quantification the relationship between laser power and corresponding temperature in this paper. The internal model control method is considered based on the establishing model. The controller is put into the actual 3D printing power control system for controlling the laser power. In the experiment, both internal model controller and the PID controller for the 3D printer are researched and deployed for comparing the their effects in the paper. The experimental result illustrates that the IMC based on the recursive least squares method is of effectiveness. © 2020 Institute of Physics Publishing. All rights reserved.

关键词： 3D printers

来源：评论

学校读者我要写书评

暂无评论

Simulation study on control characteristics of semiconductor grade monocrystalline silicon growth process

Simulation study on control characteristics of semiconductor...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Liu, Yuyu Liu, Ding Song, Zezhong Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi`an University of Technology Xi'an710048 China

ISBN: (纸本)9781665465335

The growth of Czochralski(CZ) monocrystalline silicon is a nonlinear dynamic time-varying system with complex physical changes and multi-field and multi-phase coupling. In order to meet the needs of information development, it is urgent to develop large-scale, high-quality monocrystalline silicon. However, it is extremely difficult to establish an accurate control system model. Therefore, this paper considers the complex physical changes of multi-field coupling and non-linear processes in the growth of CZ monocrystalline silicon, a lumped parameter model for the growth of monocrystalline silicon is established based on energy balance model, fluid mechanics model, and geometry model, according to the internal mechanism of the monocrystalline silicon growth and the transfer mechanism of internal material flow. According to the model, a CZ monocrystalline silicon growth simulation control system is established under the Matlab/Simulink environment, and the real-time simulation data of each state variable of crystal growth is obtained. So that the control characteristics of each state variable in the crystal growth process can be analyzed. Finally, the validity of the established model is checked by the records evaluation of the semiconductor industry production process. Finally, the validity of the established model is verified based on the data analysis of the semiconductor industry production process. The results show that the model has high accuracy and can better describe the dynamic behavior of the actual monocrystalline silicon growth system. © 2022 IEEE.

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

Enhanced Geometric Map:a 2D&3D Hybrid City Model of Large Scale Urban Environment for Robot Navigation

引用

机器人 2016年第3期38卷 311-321页

作者： LI Haifeng HU Zunhe LIU Jingtai College of Computer Science and Technology Civil Aviation University of China Tianjin 300300 China Fujian Provincial Key Laboratory of Information Processing and Intelligent Control Fuzhou 350121 China Institute of Robotics and Information Automatic System Nankai University Tianjin 300071 China Tianjin Key Laboratory of Intelligent Robotics Tianjin 300071 China

To facilitate scene understanding and robot navigation in large scale urban environment, a two-layer enhanced geometric map(EGMap) is designed using videos from a monocular onboard camera. The 2D layer of EGMap consists of a 2D building boundary map from top-down view and a 2D road map, which can support localization and advanced map-matching when compared with standard polyline-based maps. The 3D layer includes features such as 3D road model,and building facades with coplanar 3D vertical and horizontal line segments, which can provide the 3D metric features to localize the vehicles and flying-robots in 3D space. Starting from the 2D building boundary and road map, EGMap is initially constructed using feature fusion with geometric constraints under a line feature-based simultaneous localization and mapping(SLAM) framework iteratively and progressively. Then, a local bundle adjustment algorithm is proposed to jointly refine the camera localizations and EGMap features. Furthermore, the issues of uncertainty, memory use, time efficiency and obstacle effect in EGMap construction are discussed and analyzed. Physical experiments show that EGMap can be successfully constructed in large scale urban environment and the construction method is demonstrated to be very accurate and robust.

关键词：被提高的几何学的地图都市模型机械手航运同时发生的定位而且映射局部的包裹调整

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：