检索结果-内蒙古大学图书馆

2022 International Symposium on Semiconductor and Electronic Technology, ISSET 2022

作者： Sun, Wanjun Yang, Lijiao Xie, Jianan Zhang, Xiaxia Sha, Yang Mi, Shuai Lin, Tao College of Automation and Information Engineering Xi’an University of Technology Shaanxi Xi’an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Shaanxi Xi’an710048 China

To meet the demand of the laser application market for semiconductor laser function diversification, this paper proposes a handheld multi-wavelength laser stack packaging module. The 808 nm, 915 nm, and 980 nm semiconductor laser bars are selected for the integrated assembly of the multi-wavelength module. However, with the continuous increase of the optical power density of the integrated packaging module, thermal management has become a key factor affecting the performance and life of the device. In this paper, the finite element analysis method is used to analyze the influence of the arrangement of three laser stripe chips in the stacked packaging structure on the heat dissipation of the multi-wavelength module. The simulation results show that the heat dissipation efficiency of the multi-wavelength module can be improved by 13.74 % by changing the arrangement of chips. A back heat dissipation packaging structure with higher heat dissipation efficiency is proposed, and the influence of chip arrangement and working mode on the thermal characteristics of the device in the new packaging structure is simulated and analyzed. According to the simulation results, a chip arrangement that can make the heat dissipation effect of the multi-wavelength module achieve the best is determined. © 2022 Institute of Physics Publishing. All rights reserved.

关键词： Semiconductor lasers

来源：评论

学校读者我要写书评

暂无评论

Sentence-length informed method for active learning based resource-poor statistical machine translation 3

Sentence-length informed method for active learning based re...

引用

3rd CCF Conference on Natural Language processing and Chinese Computing, NLPCC 2014

作者： Du, Jinhua Wang, Miaomiao Zhang, Meng School of Automation and Information Engineering Xi’an University of Technology Xi’an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an710048 China

ISBN: (纸本)9783662459232

This paper presents a simple but effective sentence-length informed method to select informative sentences for active learning (AL) based SMT. A length factor is introduced to penalize short sentences to balance the "exploration" and "exploitation" problem. The penalty is dynamically updated at each iteration of sentence selection by the ratio of the current candidate sentence length and the overall average sentence length of the monolingual corpus. Experimental results on NIST Chinese–English pair and WMT French-English pair show that the proposed sentence-length penalty based method performs best compared with the typical selection method and random selection strategy. © Springer-Verlag Berlin Heidelberg 2014.

关键词： Iterative methods

来源：评论

学校读者我要写书评

暂无评论

Research on the weak Signal Detection Method Based on Adaptive Vibrational Resonance 35

Research on the weak Signal Detection Method Based on Adapti...

引用

第35届中国控制会议

作者： JIAO Shang-bin SUN Di LIU Ding HUANG Wei Chao National & Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing

ISBN: (纸本)9781509009107

In this paper,the weak signal detection under a stable noise is investigated based on bistable vibrational resonance(VR) which is driven by a high frequency *** the one hand,the energy of the high frequency drive signal is transferred to the low frequency weak signal when VR occurs;on the other hand,the control of stochastic resonance(SR) is achieved based on VR,which transfers more noise energy into useful signal *** addition,considering the requirements of real-time detection,the amplitude and frequency of the high frequency drive signal are optimized by the knowledge-based particle swarm optimization(KPSO),which takes the mean signal-noise-ratio(MSNR) of output as the fitness function,and the property that VR system produces the best resonance effect just when the valid system parameter a(B,Ω) is greater than zero as ***,the parameter compensation is combined to achieve multi-high frequency weak signals detection with a stable ***,the method is applied to the vibration fault diagnosis of a mono-crystalline silicon furnace,and the experiment results show the effectiveness and practicability of the method.

关键词： Adaptive vibrational resonance weak signal detection knowledge-based particle swarm optimization

来源：评论

学校读者我要写书评

暂无评论

A comparative study of four nonlinear dynamic methods and their applications in classification of ship-radiated noise

引用

Defence Technology（防务技术） 2022年第2期18卷 183-193页

作者： Yu-xing Li Shang-bin Jiao Bo Geng Qing Zhang You-min Zhang School of Automation and Information Engineering Xi’an University of TechnologyXi’an710048China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of TechnologyXi’an710048China Department of Mechanical Industrial and Aerospace EngineeringConcordia UniversityMontrealQuebec H3G 1M8Canada

Refined composite multi-scale dispersion entropy(RCMDE),as a new and effective nonlinear dynamic method,has been applied in the field of medical diagnosis and fault *** this paper,we first introduce RCMDE into the field of underwater acoustic signal processing for complexity feature extraction of ship radiated noise,and then propose a novel classification method for ship-radiated noise based on RCMDE and k-nearest neighbor(KNN),termed *** results of a comparative experiment show that the proposed RCMDE-KNN classification method can effectively extract the complexity features of ship-radiated noise,and has better classification performance under one and two scales than the other three classification methods based on multi-scale permutation entropy(MPE)and KNN,multi-scale weighted-permutation entropy(MW-PE)and KNN,and multi-scale dispersion entropy(MDE)and KNN,termed MPE-KNN,MW-PE-KNN,and *** is proved that the RCMDE-KNN classification method for ship-radiated noise is feasible and effective,and can obtain a very high recognition rate.

关键词： Nonlinear dynamic Refined composite multi-scale dispersion entropy(RCMDE) Multi-scale dispersion entropy(MDE) Multi-scale weighted-permutation entropy (MW-PE) Multi-scale permutation entropy(MPE) Classification of ship-radiated noise

来源：评论

学校读者我要写书评

暂无评论

A Multi-Kernel Principal Component Analysis Method for Quality-Related Fault Detection 37

A Multi-Kernel Principal Component Analysis Method for Quali...

引用

37th Youth Academic Annual Conference of Chinese Association of Automation, YAC 2022

作者： Mu, Lingxia Lei, Biyu Liu, Ding Xi'An University of Technology School of Automation and Information Engineering Xi'an China Xi'An University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an China

ISBN: (纸本)9781665465366

In this paper, a multi-kernel principal component analysis (MKPCA) method for quality-related fault detection is proposed. The initial space is firstly mapped to a new space. The correlated information between the new space and output quality is then obtained by the kernel function. Meanwhile, with consideration of the advantage of global function and local function, a weight factor which combines them together is introduced to construct a multi-kernel function. In this way, the algorithm achieves better learning ability. The new space is projected to two mutually orthogonal subspaces, i.e., quality-related part and quality-unrelated part. In each subspace, fault information is expressed by different statistical indicators. The numerical example is presented to evaluate the performance of the MKPCA. The results show better reliability and high fault detection rate through proper spatial decomposition and kernel function construction. © 2022 IEEE.

关键词： Fault detection

来源：评论

学校读者我要写书评

暂无评论

Vibration fatigue analysis and research of URV shunt reactor 14

Vibration fatigue analysis and research of URV shunt reactor

引用

14th IEEE Conference on Industrial Electronics and Applications, ICIEA 2019

作者： Li, Shengmin Zheng, Zhicong Liang, Jining Xiao, Yamin Faculty of Automation and Information Engineering Xi'an University Ot Technology Xi'an710048 China Intelligent Information Processing Shaanxi Key Laboratory of Complex System Control Xi' an710048 China

ISBN: (纸本)9781538694909

Problems of vibration fatigue in UHV reactor is mentioned, comparative analysis of several commonly used fatigue analysis methods, finally, the modal superposition method is used to calculate the structural fatigue caused by vibration. Through analysis of reactor vibration data, the reason for using frequency domain signals as fatigue frequency domain load spectrum to calculate the service life of reactors. In order to perform reactor fatigue analysis, a finite element model of the reactor was first built using ANSYS Workbench finite element integration software, the frequency response function FRF is obtained by harmonic response analysis, and then the vibration time domain signal are transformed into frequency signal as load spectrum input with the power density spectrum, finally, nCode fatigue analysis software is used to estimate the service life of the reactor. © 2019 IEEE.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

A Novel Power Switching control Method of the Wind Power MPPT system Based on the Switching system Theory 24

A Novel Power Switching Control Method of the Wind Power MPP...

引用

24th International Electronics Symposium, IES 2022

作者： Guo, Xin Li, Wei-Peng Pan, Yuan Liu, Jun Xi'an University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an China Xi'an University of Technology School of Automation and Information Engineering Xi'an China

ISBN: (数字)9781665489713

ISBN: (纸本)9781665489713

In order to effectively utilize the wind energy, the max power point tracking (MPPT) control method has been extensively used in the wind power system. The MPPT control in the wind power system is actually to control the power electronic converters connected with the wind turbine. However, due to the existing of the power switching devices, the converters were the typical nonlinear system. The traditional linearization modeling methods of the converters cannot represent the working process of the system accurately and the control strategies based on the linearization model of the converters only guarantee the satisfactory performance of system near the predefined working point. They were not suitable to the wind power MPPT system, which has the variable wind speeds and the variable max power points. This paper proposes a power switching control method based on a novel power switched model of the wind power MPPT system with Boost converter. The main contributions of the work are: (1) The proposed power switched model realizes the accurate description of the converter working process, which directly focus on the power states of the wind power system. (2) The proposed switching control method realizes the direct power switching control of the converter of the wind power MPPT system. The merits of the proposed method are simple control structure, no control parameter, no pulse width modulation block and strong robustness under circuit parameters uncertainty. The simulation results verify the effectiveness and the superiority of the proposed methods. © 2022 IEEE.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

Sensorless Speed control of PMSMs based on an Improved Particle Filter

Sensorless Speed Control of PMSMs based on an Improved Parti...

引用

2019 IEEE International Conference on Electrical, control and Instrumentation Engineering, ICECIE 2019

作者： Ren, Hai-Peng Nan, Zi-Yuan Li, Jie Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'An University of Technology Xi'an China Xi'An University of Technology Department of Electrical Engineering Xi'an China

ISBN: (纸本)9781728139395

Position sensors in permanent magnet synchronous motor (PMSM) are restrained in some applications because of the space restriction and the reliability of the system. A marginalized particle filter (MPF) can used to staminate the speed of the motor by combining a Kalman filter (KF) with a particle filter (PF). In the MPF algorithm, the rotor position of the permanent magnet synchronous motor (PMSM) is represented by a set of particles, and the rotor speed associated with each particle is estimated by using the KF. The PF here is used to handle the non-Gaussianity and nonlinearity of the system. In this paper, the uniform distribution of particles is proposed to replace the traditional Gaussian distribution of particles in the PF to get better performance at the low-speed range. The motor drive system prototype is built using a TMS320F28335 digital signal processor as a controller core. The proposed improved PF is used in the sensorless speed vector control PMSM system. The experimental results show that the proposed PF with a uniform distribution of initial particles enables more accurate speed estimation in the low-speed range compared to the conventional Gaussian distribution, while increasing number of particles also helps to improve the accuracy. © 2019 IEEE.

关键词： Kalman filters

来源：评论

学校读者我要写书评

暂无评论

Model predictive control of event triggering in silicon single crystal growth processes

Model predictive control of event triggering in silicon sing...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Li, Yankai Ren, Biao Liu, Ding Xi'An University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an710048 China

ISBN: (纸本)9781665465335

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process. © 2022 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Simulation study on control characteristics of semiconductor grade monocrystalline silicon growth process

Simulation study on control characteristics of semiconductor...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Liu, Yuyu Liu, Ding Song, Zezhong Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi`an University of Technology Xi'an710048 China

ISBN: (纸本)9781665465335

The growth of Czochralski(CZ) monocrystalline silicon is a nonlinear dynamic time-varying system with complex physical changes and multi-field and multi-phase coupling. In order to meet the needs of information development, it is urgent to develop large-scale, high-quality monocrystalline silicon. However, it is extremely difficult to establish an accurate control system model. Therefore, this paper considers the complex physical changes of multi-field coupling and non-linear processes in the growth of CZ monocrystalline silicon, a lumped parameter model for the growth of monocrystalline silicon is established based on energy balance model, fluid mechanics model, and geometry model, according to the internal mechanism of the monocrystalline silicon growth and the transfer mechanism of internal material flow. According to the model, a CZ monocrystalline silicon growth simulation control system is established under the Matlab/Simulink environment, and the real-time simulation data of each state variable of crystal growth is obtained. So that the control characteristics of each state variable in the crystal growth process can be analyzed. Finally, the validity of the established model is checked by the records evaluation of the semiconductor industry production process. Finally, the validity of the established model is verified based on the data analysis of the semiconductor industry production process. The results show that the model has high accuracy and can better describe the dynamic behavior of the actual monocrystalline silicon growth system. © 2022 IEEE.

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：