检索结果-内蒙古大学图书馆

Numerical simulation on the performance of axial vane type gas-liquid separator with different guide vane structure

International Journal of Fluid Machinery and Systems 2017年第1期10卷 86-98页

作者： Yang, Fan Liu, Ailan Guo, Xueyan School of Energy and Power Engineering University of Shanghai for Science and Technology No. 516 Jungong Road Shanghai200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of S hanghai for Science and Technology No. 516 Jungong Road Shanghai200093 China

In order to obtain high efficiency and low resistance droplet separation apparatus, axial vane type gas-liquid separators with different guide vanes were designed, and the RNG k-Ε model as well as discrete phase model (DPM) were used to investigate the flow pattern inside the separators. It was shown that the tangential velocity distribution under different guide vanes have Rankine vortex characteristics, pressure distribution exhibits a high similarity which value becomes big as the increase of the blade outlet angle and the decrease of the guide vane numbers. The increase of the guide vane numbers and the decrease of the blade outlet angle could make separation improve significantly. The separation efficiency is almost 100% when the droplet diameter is bigger than 40μm. © 2017, Turbomachinery Society of Japan. All rights reserved.

关键词： Numerical models

来源：评论

学校读者我要写书评

暂无评论

Aeroelastic Analysis of Preset Angle for A Typical Airfoil Section with Cubic Nonlinear Stiffness

引用

Journal of Physics: Conference Series 2019年第1期1300卷

作者： Guofang Nan Di Ding Weitao Wang School of Energy and Power Engineering University of Shanghai for Science and Technology China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering 516 Jungong Road 200093 Shanghai P.R. China

The influences of the preset angle on the dynamic responses of the typical airfoil section with cubic nonlinear stiffness were investigated under consideration of the aerodynamic flutter onset due to certain angle of attack. The typical airfoil model with cubic nonlinear stiffness is developed to analyze the plunging and the pitching motions for the airfoil section. Based on the Grossman's quasi steady aerodynamic model, the aerodynamic lift and the moment can be obtained and then the equation of motion for the airfoil section is derived by applying the Lagrange theorem. The effects of the preset angle and the oncoming flow speed on the nonlinear dynamics are analyzed by means of the bifurcation diagram, the frequency-amplitude diagram, the time history, etc. Simulation results show that the preset angle influences the intensity of the vibration, moderate or severe, stable or unstable, even under certain circumstance, the jump and chaos phenomenon occur; and the oncoming flow speed affects the distribution of the vibration energy for the plunging and the pitching motions. The unstable stall region for the responding parameters should be avoided to keep the airfoil safe in engineering practice. Some qualitative and quantitative rules are obtained for the airfoil design and the flutter suppression.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effect of environmental pressure on heat and mass transfer characteristics for fin-and-tube heat exchangers under non-unit Lewis factor

引用

APPLIED THERMAL engineering 2017年 116卷 784-791页

作者： Liu Qi Liu Jianhua Zhang Liang Xu Xiaojin Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai 200093 Peoples R China CSIC Res Inst 704 Shanghai 200031 Peoples R China

The heat and mass transfer characteristics for fin-and-tube heat exchangers with low environmental pressures have been experimentally investigated. The variation trends of the j(h) factor, In factor and Lewis factor were examined in this study when environmental pressure decreases from 101.3 to 40 kPa. The errors caused by non-unit Lewis factor when calculating the total heat transfer rate using the logarithmic mean enthalpy difference (LMED) method were discussed. It was found that the inlet humidity ratio for the incoming air is inversely proportional to environmental pressure under the experimental conditions. Both the heat and mass transfer performances decrease when the environmental pressure is reduced. However, the j(m) factor shows a transient rise when Re < 1100. Test results show that the heat and mass transfer analogy is roughly applicable, and the Lewis factor is in the range of 0.73-0.96. The maximal relative deviation of the total heat transfer rate calculated by the LMED method is about 18.7%. However, a modified LMED (m-LMED) method can describe the total heat transfer rate within 3.8%. (C) 2017 Elsevier Ltd. All rights reserved.

关键词： Environmental pressure heat transfer Mass transfer Lewis factor LMED

来源：评论

学校读者我要写书评

暂无评论

Experimental study on multi-stage gas-liquid booster pump for working fluid pressurization

引用

APPLIED THERMAL engineering 2017年 126卷 9-16页

作者： Wu, Tengma Liu, Jianhua Zhang, Liang Xu, Xiaojin Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai 200093 Peoples R China CSIC Res Inst 704 Shanghai 200031 Peoples R China

To improve the performance of organic Rankine cycle (ORC) system, this paper proposes to replace the electric working fluid pump with multi-stage gas-liquid booster pump which is driven by high pressure gas generated in evaporator of ORC system. This pump consists of four gas-liquid booster pumps. The working principle of gas-liquid booster pump and multi-stage gas-liquid booster pump are introduced respectively. By using high pressure air as driving force and water as pressurized working fluid, the performance of multi-stage gas-liquid booster pump is tested experimentally. The experimental results of this study mainly consist of two parts: the first part focuses on the pump performance with various pressure at pump inlet and outlet while valve at pump inlet is completely open;the second part focuses on various valve open ratio at pump inlet which is operated at fixed inlet and outlet pressure of 1.8 MPa and 0.15 MPa. The results show that the pump conversion efficiency decreases with the increase of inlet pressure and the decrease of outlet pressure. The maximum conversion efficiency, volume flow rate of water and volume flow rate of high pressure air are 0.72, 0.55 L/s and 0.42 L/s respectively. When the pump is operated at different valve open ratio, the volume flow rate of water and high pressure air decreases with the decrement of valve open ratio. In addition, the conversion efficiency almost maintains identical under different valve open ratio. (C) 2017 Elsevier Ltd. All rights reserved.

关键词： Organic Rankine cycle Pump power Multi-stage gas-liquid booster pump Conversion efficiency

来源：评论

学校读者我要写书评

暂无评论

The effect of variations in first- and second-order derivatives on airfoil aerodynamic performance

引用

engineering APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS 2017年第1期11卷 54-68页

作者： Yi, Penghui Wang, Ying Sun, Xiaojing Huang, Diangui Zheng, Zhongquan Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai Peoples R China Univ Shanghai Sci & Technol Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai Peoples R China Univ Kansas Dept Aerosp Engn Lawrence KS 66045 USA

The geometric factors which influence airfoil aerodynamic performance are attributed to variations in local first- and second-order curvature derivatives. Based on a self-developed computational fluid dynamics (CFD) program called UCFD, the influence of local profile variations on airfoil aerodynamic performance in different pressure areas is investigated. The results show that variations in first- and second-order derivatives of the airfoil profiles can cause fluctuations in airfoil aerodynamic performance. The greater the variation in local first- and second-order derivatives, the greater the fluctuation amplitude of the airfoil aerodynamic coefficients. Moreover, at the area near the leading edge and the shock-wave position, the surface pressure is more sensitive to changes in first- and second-order derivatives. These results provide a reference for airfoil aerodynamic shape design.

关键词： Geometric airfoil profile derivative variation surface pressure coefficient

来源：评论

学校读者我要写书评

暂无评论

Direct Simulation Monte Carlo Method for Acoustic Agglomeration under Standing Wave Condition

引用

AEROSOL AND AIR QUALITY RESEARCH 2017年第4期17卷 1073-1083页

作者： Fan, Fengxian Zhang, Mingjun Peng, Zhengbiao Chen, Jun Su, Mingxu Moghtaderi, Behdad Doroodchi, Elham Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Univ Shanghai Sci & Technol Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai 200093 Peoples R China Univ Newcastle Sch Engn Discipline Chem Engn Callaghan NSW 2308 Australia

Acoustic agglomeration proves promising for preconditioning fine particles (i.e., PM2.5) as it significantly improves the efficiency of conventional particulate removal devices. However, a good understanding of the mechanisms underlying the acoustic agglomeration in the standing wave is largely lacking. In this study, a model that accounts for all of the important particle interactions, e.g., orthokinetic interaction, gravity sedimentation, Brownian diffusion, mutual radiation pressure effect and acoustic wake effect, is developed to investigate the acoustic agglomeration dynamics of PM2.5 in the standing wave based on the framework of direct simulation Monte Carlo (DSMC) method. The results show that the combination of orthokinetic interaction and gravity sedimentation dominates the acoustic agglomeration process. Compared with Brownian diffusion and the mutual radiation pressure effect, the acoustic wake plays a relatively more important role in governing the particle agglomeration. The phenomenon of particle agglomeration becomes more pronounced when the acoustic frequency and intensity are increased. The model is shown to be capable of accurately predicting the dynamic acoustic agglomeration process in terms of the detailed evolution of particle size and spatial distribution, which in turn allows for the visualization of important features such as "orthokinetic drift". The prediction results are in good agreement with the experimental data.

关键词： Fine particles (PM2.5) Acoustic agglomeration Standing wave Direct simulation Monte Carlo (DSMC) method Numerical simulation

来源：评论

学校读者我要写书评

暂无评论

A DEM Analysis of Particle Climbing in a Vibrating Pipe 7th

A DEM Analysis of Particle Climbing in a Vibrating Pipe

引用

7th International Conference on Discrete Element Methods (DEM)

作者： Fan, F. X. Liu, J. Su, M. X. Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Univ Shanghai Sci & Technol Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai 200093 Peoples R China

ISBN: (纸本)9789811019265;9789811019258

Recent experiments have shown that when a vertical pipe is inserted into a box filled with granular material and is then set into vertical vibration, the particles may undergo climbing motion along the pipe. However, this phenomenon, which may provide efficient means for transportation of particulates in industrial applications, is still poorly understood. Therefore, here we describe a computational study of particle climbing in a vibrating pipe inserted into a static granular box using the discrete element method (DEM). We reproduce the process of particle climbing, and give the evolution of particle climbing height with time, the motion of individual particles with different initial positions, and the void filling effect of the particles from the silo into the pipe. Based on this, the mechanisms underlying the particle climbing are analyzed.

关键词： Finite difference method

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of flow characteristics for a labyrinth passage in a pressure valve

引用

Journal of Hydrodynamics 2016年第4期28卷 629-636页

作者：王海民赵越汪建兴孔祥帅刘欢李科良王喜芳 School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology

A tortuous labyrinth passage consists of a series of right angle turns in a disk of high pressure control *** this paper,numerical simulations are made for the velocity and pressure distributions in this *** is shown that the “series passage” can induce a pressure dropping more *** main function of the “series passage” is to induce a pressure dropping while the “parallel passage” is mainly to regulate the *** a cross sectional area process,a series of reduction and expansion,the pressure will also see dropping and partial recovery,which is called the multistage pressure *** this way,the velocity can be controlled in a reasonable level anywhere in this tortuous labyrinth *** the fluid pressure dropping in a downwards serrated way,the pressure is higher than the local saturate vapor pressure,therefore,no cavitation is induced by the phase transition.

关键词： passage valve dropping multistage turns sectional anywhere regulate vortex inlet

来源：评论

学校读者我要写书评

暂无评论

An LP-DOAS Instrument with a Laser Driven Light Source for Open-path Measurement of Atmospheric NO₂ in shanghai

An LP-DOAS Instrument with a Laser Driven Light Source for O...

引用

Progress in Electromagnetics Research Symposium - Spring (PIERS)

作者： Li, Mingzhi Chen, Jun Su, Mingxu Yang, Huinan Ramachandran, Arun Varma, Ravi Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai Peoples R China Natl Inst Technol Calicut Dept Phys Calicut Kerala India

ISBN: (纸本)9781509062690

shanghai is currently faced with the complex atmospheric pollution problem such as ozone (O-3) and PM2.5. O-3 is responsible for oxidization of atmospheric constituents that in turn produces secondary pollutants. Reducing atmospheric oxidation is the underpinning strategy for the prevention and control of pollution in this city. According to the observation data from the online automatic monitoring station of shanghai, the city's O-3 concentration has been rising steadily. In 2013, there are 100 days with ozone as the main pollutants, accounted for 31.9%. By Leighton relationship (K-6[O-3][NO]/K-4[NO2] = 1), concentration of O-3 is closely related to that of NO2. So, continuous monitoring of atmospheric NO2 has important significance. An instrument was developed for measuring atmospheric NO2 concentration using a powerful light source in conjunction with the long-path differential optical absorption spectroscopy (LP-DOAS) technique. This system installed at the central section of shanghai used a laser driven light source (LDLS) and a sensitive TE cooled apectrometer. The LDLS showed better stability, high optical efficiency when compared to traditional arc lamp and light emitting diodes. The light sent into the atmosphere was returned by a retroreflecting mirror placed 1.3 km away, and the light returned was sent to a high sensitive TE cooled spectrometer. The spectral range of measurement was 415-455 nm and the spectra collected were averaged over 10 min, prior to analyzing for NO2 concentration. Continuous observations were carried out for two weeks and the NO2 concentration retrieved ranged from (20-600) ug/m(3) with an estimated detection limit of 6.77 ug/m(3). The measurement results indicate that it is feasible to use this instrument for detecting the NO2 with high spatial and temporal sensitivity.

关键词： Absorption Atmospheric measurements Light sources Pollution measurement Optical sensors Wavelength measurement Instruments

来源：评论

学校读者我要写书评

暂无评论

Simulation of natural convection in an inclined polar cavity using a finite-difference lattice Boltzmann method

引用

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 2017年第6期31卷 3053-3065页

作者： Yang, Fan Yang, Haicheng Yan, Yonghua Guo, Xueyan Dai, Ren Liu, Chaoqun Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Shanghai Key Lab Multiphase Flow & Heat Transfer Shanghai 200093 Peoples R China Alcorn State Univ Dept Math & Comp Sci Lorman MS 39096 USA Univ Texas Arlington Dept Math Arlington TX 76019 USA

Natural convection heat transfer in an inclined polar cavity was studied using a Finite-difference lattice Boltzmann method ( FDLBM) based on a double-population approach for body-fitted coordinates. A D2G9 model coupled with the simplest TD2Q4 lattice model was applied to determine the velocity field and temperature field. For both velocity and temperature fields, the discrete spatial derivatives were obtained by combining the upwind scheme with the central scheme, and the discrete temporal term is obtained using a fourth-order Runge-Kutta scheme. Studies were carried out for different Rayleigh numbers and different inclination angles. The results in terms of streamlines, isotherms, and Nusselt numbers explain the heat transfer mechanism of natural convection in an inclined polar cavity due to the change of Rayleigh number and inclination angle.

关键词： Body-fitted coordinates Finite-difference LBM Natural convection Inclination Polar cavity Rayleigh-Benard convection

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：