检索结果-内蒙古大学图书馆

In situ STEM Observation of Cation Diffusion and Surface Reconstruction at van der Waals Gaps

Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 2023年第1期29卷 1642-1643页

作者： Cui, Wenjun Lin, Weixiao Lu, Weichao Liu, Chengshan Gao, Zhixiao Ma, Hao Zhao, Wen Van Tendeloo, Gustaaf Sang, Xiahan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan China Nanostructure Research Center Wuhan University of Technology Wuhan China School of Materials Science and Engineering China University of Petroleum (East China) Qingdao Shandong China Electron Microscopy for Materials Science (EMAT) University of Antwerp Antwerp Belgium

来源：评论

学校读者我要写书评

暂无评论

高效多孔碳基催化剂的研究进展及其在锌空气电池中应用

引用

Science China materials 2023年第9期66卷 3381-3400页

作者：蔡世昌安宇冯亚刚段磊张寒露张猛吴佳宾唐浩林 School of Materials Science and Engineering Henan University of TechnologyZhengzhou 450001China Department of Chemistry Tsinghua UniversityBeijing 100084China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong LaboratoryXianhu Hydrogen ValleyFoshan 528200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

近年来,能源短缺问题日益突出,传统化石燃料使用过程中排放的二氧化碳大大加剧了全球变暖.锌空气电池作为一种新型能源,由于其低成本、高比能量密度、高安全性和环境友好等优点而受到广泛关注.然而,锌空气电池的发展速度缓慢,一个主要... 详细信息

近年来,能源短缺问题日益突出,传统化石燃料使用过程中排放的二氧化碳大大加剧了全球变暖.锌空气电池作为一种新型能源,由于其低成本、高比能量密度、高安全性和环境友好等优点而受到广泛关注.然而,锌空气电池的发展速度缓慢,一个主要原因是阴极空气催化剂的催化效率低和稳定性差.本文总结了用于空气阴极的多孔碳基催化剂的最新研究进展.在对锌空气电池进行简要介绍后,从孔结构和杂原子掺杂两方面介绍了碳载体的结构和组成.根据孔径大小:微孔、介孔和大孔,详细介绍了锌空气电池中多孔碳的设计和制备.此外,还根据氮、氟、硫、磷和硼等杂原子类别,分别讨论了杂原子掺杂的合成策略以及相应电池性能.最后,本文对锌空气电池未来发展过程中的挑战和机遇进行了展望.

关键词：锌空气电池碳载体能源短缺问题碳基催化剂化石燃料杂原子掺杂多孔碳新型能源

来源：评论

学校读者我要写书评

暂无评论

Shear induced deformation twinning evolution in thermoelectric InSb

引用

npj Computational materials 2021年第1期7卷 1008-1016页

作者： Zhongtao Lu Ben Huang Guodong Li Xiaolian Zhang Qi An Bo Duan Pengcheng Zhai Qingjie Zhang William A.Goddard III Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of ScienceWuhan University of TechnologyWuhanPR China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanPR China Department of Chemical and Materials Engineering University of Nevada RenoRenoNVUSA Materials and Process Simulation Center California Institute of TechnologyPasadenaCAUSA

Twin boundary(TB)engineering has been widely applied to enhance the strength and plasticity of metals and alloys,but is rarely adopted in thermoelectric(TE)*** previous first-principles results showed that nanotwins can strengthen TE Indium Antimony(InSb)through In–Sb covalent bond rearrangement at the ***,we further show that shear-induced deformation twinning enhances plasticity of *** demonstrate this by employing large-scale molecular dynamics(MD)to follow the shear stress response of flawless single-crystal InSb along various slip *** observed that the maximum shear strain for the (111)[112] slip system can be up to 0.85 due to shear-induced deformation *** attribute this deformation twinning to the“catching bond”involving breaking and re-formation of In–Sb bond in *** finding opens up a strategy to increase the plasticity of TE InSb by deformation twinning,which is expected to be implemented in other isotypicⅢ–V semiconductors with zinc blende structure.

关键词： deformation plasticity Shear

来源：评论

学校读者我要写书评

暂无评论

Rational design of hierarchically porous Fe-N-doped carbon as efficient electrocatalyst for oxygen reduction reaction and Zn-air batteries

引用

Nano Research 2021年第12期14卷 4768-4775页

作者： Zihan Meng Neng Chen Shichang Cai Jiawei Wu Rui Wang Tian Tian Haolin Tang Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan528200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China School of Material Science and Engineering Henan University of TechnologyZhengzhou450001China

The rational design and construction of hierarchically porous nanostructure for oxygen reduction reaction (ORR) electrocatalysts is crucial to facilitate the exposure of accessible active sites and promote the mass/electron transfer under the gas-solid-liquid triple-phase condition. Herein, an ingenious method through the pyrolysis of creative polyvinylimidazole coordination with Zn/Fe salt precursors is developed to fabricate hierarchically porous Fe-N-doped carbon framework as efficient ORR electrocatalyst. The volatilization of Zn species combined with the nanoscale Kirkendall effect of Fe dopants during the pyrolysis build the hierarchical micro-, meso-, and macroporous nanostructure with a high specific surface area (1,586 m^(2)·g^(−1)), which provide sufficient exposed active sites and multiscale mass/charge transport channels. The optimized electrocatalyst exhibits superior ORR activity and robust stability in both alkaline and acidic electrolytes. The Zn-air battery fabricated by such attractive electrocatalyst as air cathode displays a higher peak power density than that of Pt/C-based Zn-air battery, suggesting the great potential of this electrocatalyst for Zn-air batteries.

关键词： hierarchically porous structure Fe-N-doped carbon electrocatalysts oxygen reduction reaction Zn-air batteries

来源：评论

学校读者我要写书评

暂无评论

三维分级复合固态电解质用于增强全固态锂金属电池界面相容性

引用

Science China materials 2023年第2期66卷 522-530页

作者：吴梦君宋江平朱欣欣詹慧田甜王锐雷家珩唐浩林 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Chemistry School of ChemistryChemical Engineering and Life SciencesWuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China

复合固体电解质结合了聚合物固体电解质和无机固态电解质的优势,被认为是用于高能量密度全固态锂金属电池最有前景的电解质.但是,电极/电解质界面相容性差以及填料团聚阻碍了复合固态电解质的实用化进程.为解决上述问题,本文利用硅烷偶... 详细信息

复合固体电解质结合了聚合物固体电解质和无机固态电解质的优势,被认为是用于高能量密度全固态锂金属电池最有前景的电解质.但是,电极/电解质界面相容性差以及填料团聚阻碍了复合固态电解质的实用化进程.为解决上述问题,本文利用硅烷偶联剂(KH570)修饰Li_(6.4)La_(3)Zr_(2)Al_(0.2)O_(12)(KH@LLZO),通过原位聚合得到三维分级结构复合固态电解质.电解质中填料(KH@LLZO)含量高(80 wt%)的一侧提供刚性的屏障来抑制锂枝晶的生长;填料含量低(8 wt%)的一侧具有最优的离子电导率,赋予电池体系高效的锂离子传输.得益于电解质独特的分级结构,采用该电解质组装得到的对称锂电池具有0.9 mA cm^(-2)的临界电流密度,并且在0.3 mA h cm^(-2)的面容量下稳定循环超过600 h.组装的Li|LiFePO_(4)电池也展现了长循环稳定性(0.5 C电流密度下循环200圈,容量保持率为91.6%).此外,组装得到的软包电池表现出优异的柔韧性和安全性.本研究提出的采用表面修饰填料(KH@LLZO)构筑得到的分级结构复合固态电解质,为开发无枝晶、高性能全固态锂金属电池开辟了一条新途径.

关键词：固态电解质临界电流密度聚合物固体电解质分级结构离子电导率锂电池界面相容性复合固体电解质

来源：评论

学校读者我要写书评

暂无评论

Microstructuring Conductive Electrospun Mats for Enhanced Electro‑active Biofilm Growth and High‑Performance Bioelectrocatalysis

引用

advanced Fiber materials 2023年第5期5卷 1699-1711页

作者： Min Li Hao Lu Jiadong Hu Xuemei Xiang Yanling Zheng Wenhu Gao Wei Sun Wei Wang Zhisong Lu Yan Qiao Institute for Clean Energy and Advanced Materials School of Materials and EnergySouthwest UniversityChongqing 400715People’s Republic of China Sino‑Singapore Joint Laboratory of Materials and Technologies for Proactive Health Monitoring School of Materials and EnergySouthwest UniversityChongqing 400715People’s Republic of China Experimental Center for Virtual Simulation of Sports and Health Southwest UniversityChongqing 400715People’s Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University TechnologyWuhan 430070People’s Republic of China Hubei Longzhong Lab Xiangyang 441000People’s Republic of China Key Laboratory of Laser Technology and Optoelectronic Functional Materials of Hainan Province College of Chemistry and Chemical EngineeringHainan Normal UniversityHaikou 571158People’s Republic of China Singapore Institute of Manufacturing Technology Singapore 138669Singapore

Electrospun materials have attracted considerable attention in microbial fuel cells(MFC)owing to their porous structures,which facilitate the growth of electro-active biofilms(EABs).However,the impact of fiber diameter-controlled porous architectures on EAB growth and MFC performance has not been extensively ***,a highly conductive polypyrrole-modified electrospun polyacrylonitrile(PAN)mat was prepared as an electrode material for Shewanella putrefaciens CN32-based *** dominant pore size of the corresponding mat increases from 1 to around 20μm as the fiber diameter increases from 720 to 3770 *** variation affects the adhesion and growth behaviors of electrochemically active bacteria on the mat-based *** electrodes with poresranging from 2 to 10μm allow bacterial penetration into the interior,leading to significant biofilm loading and effective ***,the tight lamination of the electrospun fibers restricts bacterial growth in the deep interior *** developed a friction-induced triboelectric expanding approach to rendering the mats with layered structures to overcome this *** inter-layer spaces of the expanded conductive mat can facilitate bacterial loading from both sides of each layer and serve as channels to accelerate the catalysis of organic ***,the expanded conductive mat with appropriate pore sizes delivers superior bioelectrocatalytic performance in MFCs and dye *** on the findings,a mechanism for the porous structure-controlled EAB formation and bioelectrocatalytic performance was *** work may provide helpful guidance and insights for designing microfiber-based electrodes for microbial fuel cells.

关键词： Electrospun mat Porous structure Bioelectrocatalysis Microbial fuel cells Polypyrrole

来源：评论

学校读者我要写书评

暂无评论

Extended Phase Homogeneity and Improved Out-of-Plane Charge Transfer in Sb and Te Co-Alloyed N-Type Bise Layered Compound with Extraordinary Thermoelectric Performance

SSRN

引用

SSRN 2023年

作者： Yang, Xinru Xie, Chenghao Sun, Jinchang Xu, Weibin Li, Songlin Tang, Xinfeng Tan, Gangjian State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

BiSe is a promising n-type layered thermoelectric compound near room temperature. However, its full potential is not realized because of its overall high electron density and inferior interlayer charge transport. In this study, we demonstrate that these drawbacks are well addressed by a feasible Sb and Te co-alloying approach. Sb, preferably substituting Bi atoms in the Bi2Se3 quintuplet layer, effectively neutralizing excess electrons of BiSe by suppressing positively charged Se vacancies. On the other hand, Te exclusively replaces Se, and promotes interlayer charge transfer by increasing chemical bond covalency. In addition, Te alloying significantly impedes phonon propagation of BiSe by introducing considerable size and mass disorders. More importantly, it is found that co-alloying expands the phase homogeneity of BiSe, which further intensifies the respective functions of Sb and Te alloying. As a consequence, a peak ZT value of 0.6 at 425 K is realized in the sample Bi0.6Sb0.4Se0.6Te0.4, which is 2.5 times that of pristine BiSe. Our work suggests that Sb and Te co-alloyed BiSe is a robust candidate for thermoelectric application near room temperature. © 2023, The Authors. All rights reserved.

关键词： Charge transfer

来源：评论

学校读者我要写书评

暂无评论

Composition, Structure and Electrochemical Performance of Lisipscl Electrolyte with Li/Li-In Anodes in All-Solid-State Batteries

SSRN

引用

SSRN 2023年

作者： Zhang, Ji-Wei Wang, Wen-Hao Xie, Meng-Xiang Wu, Hou-Ran Wang, Yan-Pei Bao, Hao-Tian Cao, Bo-Qun Shao, Gang-Qin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei430070 China

The lithium silicon phosphor sulfo-chloride (LiSiPSCl) with a Li10GeP2S12-type structure is one of the most promising solid electrolytes (SEs) for all-solid-state lithium-ion batteries (ASSLIBs) due to its currently highest ionic conductivity at RT. In this work, three kinds of LiSiPSCl electrolytes, i.e. Li7.59(10)Si1.95(9)P1.65(7)S11.64(1)Cl0.36(1) (SE-450), Li7.67(12)Si1.90(1)P1.67(1)S11.61(2)Cl0.39(2) (SE-475) and Li7.58(5)Si1.75(4)P1.79(2)S11.54(4)Cl0.46(4) (SE-500), were prepared at 450 / 475 / 500 oC for 8 h through a solid-state method. The assembling of blocking / symmetrical / semi-blocking cells and ASSLIBs, and electrochemical measurements were carried out by coupling the three SEs with two kinds of anodes (Li metal and Li-In alloy) and one cathode of LiNbO3-coated LiNi0.8Co0.1Mn0.1O2 (NCM@LNO). Studies were focused on chemical compositions, phase compositions, structure refinements, electrolyte/anode and electrolyte/cathode interfacial stability. Results show that LiSiPSCl electrolytes had favorable interfacial stability with Li-In anode and exhibited low polarization voltage ( © 2023, The Authors. All rights reserved.

关键词： Sulfur compounds

来源：评论

学校读者我要写书评

暂无评论

Bioinspired Noncyclic Transfer Pathway Electron Donors for Unprecedented Hydrogen Production

引用

CCS Chemistry 2023年第6期5卷 1470-1482页

作者： Jing Liu Chao Wang Wenbei Yu Heng Zhao Zhi-Yi Hu Fu Liu Tawfique Hasan Yu Li Gustaaf Van Tendeloo Can Li Bao-Lian Su State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology430070 Wuhan Nanostructure Research Centre(NRC) Wuhan University of Technology430070 Wuhan School of Materials Science and Engineering Zhejiang University310027 Hangzhou Cambridge Graphene Centre University of CambridgeCambridge CB30FA EMAT(Electron Microscopy for Materials Science) University of AntwerpB-2020 Antwerp State Key Laboratory of Catalysis Dalian Institute of Chemical Physics116023 Dalian Laboratory of Inorganic Materials Chemistry(CMI) University of NamurB-5000 Namur

Electron donors are widely exploited in visible-light photocatalytic hydrogen *** a typical electron donor pair and often the first choice for hydrogen production,the sodium sulfide-sodium sulfite pair has been extensively ***,the resultant thiosulfate ions consume the photogenerated electrons to form an undesirable pseudocyclic electron transfer pathway during the photocatalytic process,strongly limiting the solar energy conversion ***,we report novel and bioinspired electron donor pairs offering a noncyclic electron transfer pathway that provides more electrons without the consumption of the photogenerated *** to the state-of-the-art electron donor pair Na_(2)S-Na_(2)SO_(3),these novel Na_(2)S-NaH_(2)PO_(2)and Na_(2)S-NaNO_(2)electron donor pairs enable an unprecedented enhancement of up to 370%and 140%for average photocatalytic H_(2)production over commercial CdS nanoparticles,and they are versatile for a large series of photocatalysts for visible-light water *** discovery of these novel electron donor pairs can lead to a revolution in photocatalysis and is of great significance for industrial visible-light-driven H_(2)production.

关键词： noncyclic electron transfer Na_(2)SNaH_(2)PO_(2) Na_(2)S-NaNO_(2) electron donor pairs photocatalytic H_(2)production

来源：评论

学校读者我要写书评

暂无评论

Highly Flexible Graphene-Film-Based Rectenna for Wireless Energy Harvesting

引用

Energy & Environmental materials 2024年第2期7卷 320-325页

作者： Jingwei Zhang Yuchao Wang Rongguo Song Zongkui Kou Daping He Hubei Engineering Research Center of RF-Microwave Technology and Application School of ScienceWuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Herein,we report the design,fabrication,and performance of two wireless energy harvesting devices based on highly flexible graphene macroscopic films(FGMFs).We first demonstrate that benefiting from the high conductivity of up to 1×10^(6)S m^(-1)and good resistive stability of FGMFs even under extensive bending,the FGMFs-based rectifying circuit(GRC)exhibits good flexibility and RF-to-DC efficiency of 53%at 2.1 ***,we further expand the application of FGMFs to a flexible wideband monopole rectenna and a 2.45 GHz wearable rectenna for harvesting wireless *** wideband rectenna at various bending conditions produces a maximum conversion efficiency of 52%,46%,and 44%at the 5th Generation(5G)2.1 GHz,Industrial Long-Term Evolution(LTE)2.3 GHz,and Scientific Medical(ISM)2.45 GHz,respectively.A 2.45 GHz GRC is optimized and integrated with an AMC-backed wearable *** proposed 2.45 GHz wearable rectenna shows a maximum conversion efficiency of 55.7%.All the results indicate that the highly flexible graphene-film-based rectennas have great potential as a wireless power supplier for smart Internet of Things(loT)applications.

关键词： flexible rectennas highly flexible graphene-based films wireless energy harvesting

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：