检索结果-内蒙古大学图书馆

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Yu, Jiawei Zhu, Yihua Zhou, Yini Hu, Bo Li, Zheyu Li, Xiaoyu State Key Laboratory of HVDC Electric Power Research Institute China Southern Power Grid Guangzhou510663 China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819620418

The large-scale access of wind power causes a significant reduction in the inertia of the power system, seriously threatening the security and stability of the system frequency. Inertia control methods based on the optimized PLLs provide a solution to the low inertia problem of doubly-fed inductance generator (DFIG)-based wind turbines (WTs), but they still suffer from poor dynamic performance and obvious phase-locked error in steady state. For this reason, a novel inertia control method for DFIG-based WTs is proposed in this paper to support the system frequency with better performance in all aspects. Firstly, an equivalent inertia model is deduced considering the dynamic of control and the reason why modifying PLL can realize inertia response of WT is analyzed. Then, the existing inertia control methods based on optimized PLL is introduced and a novel inertia control method with phase-locked error feed-forward in PLL (pefPLL) is proposed. After that, the inertia characteristics, dynamic performance, and steady state performance of pefPLL and other PLLs are compared. Finally, the superiority of the novel inertia control method with pefPLL is verified by simulations. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Wind turbines

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Electrode Erosion Process with High Current Vacuum Arc 19th

Experimental Study on Electrode Erosion Process with High Cu...

引用

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Peng, Ruochen Li, Yilong Zhao, Yuan Chen, Lixue Ya, Penglong Lyu, Tianmao State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science & Technology Wuhan China School of Electrical and Electronic Engineering Huazhong University of Science & Technology Wuhan China Key Laboratory of Pulsed Power Technology Huazhong University of Science & Technology Ministry of Education China

ISBN: (纸本)9789819613861

During the breaking process, the erosion of anode contact greatly affects the result of high current vacuum breaking. Therefore, it is important to study the forming and transforming process of anode modes for improving the breaking performance and life of vacuum circuit breaker. The cup axial magnetic field (AMF) contacts is widely used in vacuum trigger switch and vacuum on-load tap changer. In order to study the vacuum arc characteristics and anode mode change of cup AMF contacts under high current density, the 40 mm diameter cup AMF contacts with six slots is observed and studied by experimental means under the gap distance of 6 mm and 10 mm. In this paper, the arc current-voltage characteristics, vacuum arc shape and surface erosion of contact are analyzed. The analysis results show that the larger the contact gap, the larger the arc voltage, the smaller the arc anode mode threshold current and the more serious the contact erosion degree. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Anodes

来源：评论

学校读者我要写书评

暂无评论

Analysis of Three-Phase Short-Circuit Electromotive Force on Six Vacuum-Break Parallel-Type Generator Outlet Circuit Breakers 11th

Analysis of Three-Phase Short-Circuit Electromotive Force on...

引用

11th Frontier Academic Forum of Electrical engineering, FAFEE 2024

作者： Sun, Likang Chen, Lixue He, Yinghui Zou, Xinyang Li, Yingzhuo State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Wuhan430074 China Key Laboratory of Pulsed Power Technology Ministry of Education School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819787791

Currently, vacuum type generator outlet circuit breaker dominates the large-capacity generator circuit breaker. However, due to the large short-circuit current at the generator outlet end, the generator outlet circuit breaker needs to bear a great short-circuit electromotive force, thus affecting its dynamic stability. In this paper, COMSOL is used to construct a model of a six vacuum break parallel type outlet circuit breaker for the protection of a megawatt-level generator. Based on Maxwell's electromagnetic theory, the transient calculation of three-phase short-circuit electromotive force under different phases is carried out for the generator outlet vacuum circuit breaker, and the great values of short-circuit electromotive force under different phases are obtained for each phase. The results show that the main component of the short-circuit electromotive force is the electromotive force in the y-direction. And based on the maximum transient electromotive force, the influence of the material on the short-circuit electromotive force is studied, which provides theoretical support for the analysis of the short-circuit electromotive force of the generator outlet circuit breaker and the optimized design of the shell. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Electric shielding

来源：评论

学校读者我要写书评

暂无评论

Al-F co-doping towards enhanced electrolyte-electrodes interface properties for halide and sulfide solid electrolytes

引用

Chinese Chemical Letters 2025年第1期36卷 610-617页

作者： Han Yan Jingming Yao Zhangran Ye Qiaoquan Lin Ziqi Zhang Shulin Li Dawei Song Zhenyu Wang Chuang Yu Long Zhang College of Physics and Energy Fujian Normal UniversityFuzhou 350117China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China Tianjin Key Laboratory for Photoelectric Materials and Devices School of Materials Science and EngineeringTianjin University of TechnologyTianjin 300384China Guilin Electrical Equipment Scientific Research Institute Co. Ltd.Guilin 541004China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430000China

All-solid-state Li batteries(ASSLBs)using solid electrolytes(SEs)have gained significant attention in recent years considering the safety issue and their high energy *** these advantages,the commercialization of ASSLBs still faces challenges regarding the electrolyte/electrodes interfaces and growth of Li *** doping is an effective and direct method to enhance the performance of ***,we report an Al-F co-doping strategy to improve the overall properties including ion conductivity,high voltage stability,and cathode and anode ***,the Al-F co-doping enables the formation of a thin Li-Al alloy layer and fluoride interphases,thereby constructing a relatively stable interface and promoting uniform Li *** similar merits of Al-F co-doping are also revealed in the Li-argyrodite *** assembled with these optimized electrolytes gain good electrochemical performance,demonstrating the universality of Al-F co-doping towards advanced SEs.

关键词： Solid electrolytes Li halides Li_(2)ZrCl_(6) Li argyrodites Fluorine doping

来源：评论

学校读者我要写书评

暂无评论

Design and Analysis of Coupled Self-charging Mechanical DC Circuit Breaker

Design and Analysis of Coupled Self-charging Mechanical DC C...

引用

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Xie, Yunlong Yuan, Zhao Chen, Lixue State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Wuhan430074 China Key Laboratory of Pulsed Power Technology Ministry of Education School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819620456

Mechanical DC circuit breakers have become an irreplaceable part of flexible DC power grids because of their advantages of high economy, low con-duction impedance, and reliable control. However, the large volume of the charging circuit and the high interruption pressure in low current are still the problems it faces. To address the aforementioned issues, a Coupled Self-charging Mechanical DC Circuit Breaker (CSC-DCCB) is proposed. This innovative solution mitigates the risk of switch arc reignition during the commutation process by incorporating a self-charging circuit. The energy consumption process of metal-oxide varistor will cause the capacitor to complete recharging, and this voltage will be used for the reclosing of the CSC-DCCB. Secondly, the parameter of the CSC-DCCB is optimized to achieve a lower overall capacity of the circuit breaker and the rated voltage of the converter switches, which retains the traditional low conduction loss. Finally, the feasibility of CSC-DCCB is validated through PSCAD, the technical parameters of CSC-DCCB are compared with traditional DCCB, showing that CSC-DCCB has better economic efficiency. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Flexible electronics

来源：评论

学校读者我要写书评

暂无评论

The analysis and assessment of DC-Link voltage control loop dynamics on the transient synchronization stability of grid-following converters

引用

Electric Power Systems Research 2025年 247卷

作者： Xie, Chenyang Lin, Xinchun Sun, Huiqiang Wei, Juntian Zhang, Jiayan State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan China

The transient synchronization stability of grid-following voltage source converters has been extensively investigated, but most of the previous literature has only studied the transient dynamics of the phase-locked loop (PLL) while ignoring the dynamics of the DC-link voltage control (DVC) loop. When the bandwidths of the PLL and DVC are relatively close to each other, erroneous conclusions will be derived if neglecting the transient influence of the DVC loop. This paper first takes into account the transient dynamics of the DVC loop while applying the improved equal-area criterion (EAC) analysis, which reveals how the DVC loop affects the transient synchronization stability. Then, a fourth-order model considering the DVC dynamics is obtained to quantitatively determine a reasonable range of bandwidth and damping ratio for the DVC loop. Moreover, the extent of the influence of DVC on transient synchronization stability with variation of grid strength is analyzed. © 2025

关键词： Transient analysis

来源：评论

学校读者我要写书评

暂无评论

Numerical Study of the Current Density on the Armature and Rail Interface with Dynamic Contact

Numerical Study of the Current Density on the Armature and R...

引用

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Xu, Jinghan Xia, Shengguo Chen, Lixue Ministry of Education Hubei Wuhan430074 China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Hubei Wuhan430074 China School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819620791

The electrical contact between the armature and rail is acknowledged as imperfect electrical contact (ImPEC), exhibiting characteristics distinct from bulk behavior. It is important to understand the current distribution of the ImPEC for future design and optimization. This paper proposes ImPEC boundary conditions by combining the contact layer model (CLM) and the Cooper-Mikic-Yoranovich model (CMYM), and the current distribution is numerically studied. Variations in the contact pressure and current density with time are analyzed. The results show a rapid increase in the contact pressure and area during the current ramp-up stage, being constant in the flat stage, and a gradual decline in the current ramp-down stage. The current path changes with the contact area, and the current shifts from the trailing edge to the leading edge over time. Additionally, comparative calculations are performed to analyze current variations under dynamic contact. Results suggest that the current distribution is influenced by magnetic diffusion and forced shifts of current caused by dynamic contact. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Threshold current density

来源：评论

学校读者我要写书评

暂无评论

Effect of electrochemical hydrogen charging on the microstructure and mechanical behavior of a duplex structured Mg-8wt.%Li alloy

引用

Journal of Magnesium and Alloys 2025年第2期13卷 668-680页

作者： Shuo Wang Daokui Xu Baojie Wang Dongliang Wang Zhiqiang Zhang Li Liu Jie Chen Key Lab of Electromagnetic Processing of Materials Ministry of EducationNortheastern UniversityShenyang110819China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China Engineering Research Center of Advanced Materials Preparing Technology Ministry of EducationNortheastern UniversityShenyang110819China Binzhou Institute of Technology BinzhouShandong Province256606China Shandong Key Laboratory of Advanced Aluminium Materials and Technology BinzhouShandong Province256606China School of Environmental and Chemical Engineering Shenyang Ligong UniversityShenyang110159China Spallation Neutron Source Science Center Dongguan523803China

In this work,through performing microstructural characterization,tensile testing and failure analysis,the influence of electrochemical hydrogen charging on the microstructure and mechanical behavior of an as-cast Mg-8wt.%Li alloy was *** revealed that after being hydrogen charged at 50 mA/cm2 for respectively 3 h,6 h and 18 h in 0.1 M NaCl solution,obvious HID occurred and the damage degree was gradually increased with the hydrogen charging *** the sample being hydrogen charged for 3 h,micro pores with the diameter ranging from 10~30µm were formed and preferentially present inα-Mg ***,micro cracks with the length ranging from 10~50µm mainly initiated inα-Mg phase,atα-Mg/β-Li interfaces and the peripheries of *** the increase of hydrogen charging time,the numbers of pores and cracks were obviously *** results revealed that the hydrogen charging can simultaneously decrease the tensile strength and ductility of the *** with the uncharged sample,the tensile yield strength,ultimate tensile strength and the elongation ratio to failure were respectively reduced by 5.7%,7.3%,31.7%for the 3h-charged sample and 24.6%,24.8%,67.0%for the 18h-charged *** analysis indicated that hydrogen charging can induce the brittle cracking of the alloy and the size of brittle cracking region being composed of quasi-cleavage facets and interfacial cracks on the fracture surfaces was increased with the hydrogen charging time.

关键词： Magnesium-lithium alloy Microstructure Hydrogen-induced damage Hydrogen embrittlement Mechanical behavior

来源：评论

学校读者我要写书评

暂无评论

Metal-organic polyhedra as dynamic cross-linker for recyclable mixed matrix membranes with promising dimension stability

引用

Science China Chemistry 2025年第2期68卷 705-713页

作者： Linjie Lan Mingxin Zhang Haiyan Xiao Wei Liu-Fu Yuyan Lai Jiadong Chen Jia-Fu Yin Panchao Yin State Key Laboratory of Luminescent Materials and Devices&South China Advanced Institute for Soft Matter Science and Technology Guangdong Basic Research Center of Excellence for Energy and Information Polymer MaterialsSouth China University of TechnologyGuangzhou 510641China State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine ChemistrySchool of Chemical Engineering and TechnologyHainan UniversityHaikou 570228China

Mixed matrix membranes(MMMs)are designed by incorporating microporous inorganic fillers into polymer matrix for the integration of inorganics’excellent gas separation performance with polymers’promising ***,due to the complex interphase interaction,the prevention of long-term aging is still challenging and the poor processability/recyclability of MMMs hinders their extensive ***,a coordination assembly protocol is developed for the fabrication of MMMs with both excellent processability/recyclability upon thermal annealing and promising dimension stability even under high gas *** bearing isophthalic acid(IPA)as side chains are applied to coordinate with Cu^(2+)and the assembled 2.5 nm microporous metal-organic polyhedra(MOP),{Cu_(24)IPA_(24)},serves as multi-functional cross-linkers for the polymer network *** MOPs’well-defined microporosity grants MMMs the capability for O_(2)/N_(2) separation while their activated dynamics at high temperatures(>120℃)endows polymer networks with excellent *** contrast to conventional supramolecular units,the MOPs possess unique logarithmic ligand-exchange kinetics and they show nearly frozen bonding dynamics at room temperature,ensuring promising dimensional stability to overcome the long-term aging and high gas pressure *** work not only provides fundamental understanding of the unique relaxation dynamics of complex systems with intertwined dynamics of supramolecular bonds and polymer chains,but also paves new avenues for the fabrication of robust and recyclable MMMs and elastomers.

关键词： dynamic bonding metal-organic polyhedra mixed matrix membrane polymer recycling gas separation

来源：评论

学校读者我要写书评

暂无评论

Electrostatic Interference Suppression Method for Magnetic Flux Measurement in the Formation Area of HFRC Device 11th

Electrostatic Interference Suppression Method for Magnetic F...

引用

11th Frontier Academic Forum of Electrical engineering, FAFEE 2024

作者： Zhang, Yujun Chen, Zhipeng Rao, Bo Yang, Yong Li, Zhuolong Zhao, Yanhao Wang, Liye State Key Laboratory of Advanced Electromagnetic Technology International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma Physics School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819788231

This paper proposes a comprehensive solution to address the interference challenges encountered during magnetic flux loop measurement of flux in Field-Reversed Configuration fusion devices. The high-frequency magnetic field generated by the high voltage discharge coil induces a high voltage in the magnetic flux loop circuit. However, the accompanying electrostatic interference significantly affects the measurement accuracy of magnetic flux. Although traditional isolation, shielding, and grounding techniques can mitigate electrostatic interference to some extent, their implementation is challenging, and they have stringent requirements for the grounding system. In view of this, this study added an electrostatic shielding layer between the magnetic flux loop and the discharge coil. Experimental results show that this measure effectively suppresses electrostatic interference. Simultaneously, this study utilizes a differential measurement method to further reduce electrostatic interference. Experiments show that the flux loop can accurately reflect the flux value, and the correlation coefficient between the measured flux and the theoretical value is 0.935. These improvements not only significantly enhance the accuracy and reliability of magnetic flux measurements but also provide more precise data support for magnetic diagostics research and experiments in Field-Reversed Configuration fusion devices. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Magnetic shielding

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：