检索结果-内蒙古大学图书馆

Fractal Geometry-based Porosity Analysis of Cementitious Composite material Using Wollastonite Under Freeze-thaw Condition

引用

Journal of Wuhan University of technology(materials Science) 2025年第03期40卷 769-779页

作者： Aziza Kuldasheva HUANG Bin Kholjigit Kuldashev LI Beixing Bakhtiyor Saidmuratov College of Civil Engineering and Architecture Wuhan University of Technology State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Department of Technology of Building Material and Products Samarkand State Architectural and Civil Engineering University Samarkand International University of Technology School of Engineering State Key Laboratory of Silicate Materials for Architecture Wuhan University of Technology

Low porosity is very significant for cementitious composite materials (CCM) under freeze-thaw *** reduce the porosity of CCM,we used wollastonite mineral fibers as a partial replacement for cement and *** five combinations,in which 10%,32%,and 48% Wollastonite were added,were made for scanning using both scanning electron microscopy (SEM) and computed tomography scan technology (CT).Then,the 2D SEM pictures and the 3D pore distribution curves are obtained before and after the freezing and thawing processes,where the micro-pores in the CCM materials are *** fractal dimension is used to quantify the topography image in two dimensions,as well as the pore distribution in three *** method allows for the determination of both surface porosity and volume porosity,both of which show an increase in response to an escalation of freeze-thaw *** is also found that the micro-damage in the concrete is of self-similarity,and in the context of the fractal dimension,the pore evolution can be quantitatively characterized across different sizes,ranging from local to global levels,before and after freezing and thawing.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Design and Dynamic Experiment of Al-Cu Graded materials Impactor with Strain Rate of 10^(4)–10^(5)/s

引用

稀有金属材料与工程 2025年第3期54卷 581-586页

作者： Hu Jianian Zhou Zizheng Li Yidi Chen Xiang Yang Gang Liu Jintao Zhang Jian State Key Laboratory of Precision Blasting Jianghan UniversityWuhan 430056China Hubei Key Laboratory of Blasting Engineering Jianghan UniversityWuhan 430056China Luoyang Ship Material Research Institute Luoyang 471023China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were *** Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design *** parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/*** results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.

关键词： high strain rate Al-Cu graded materials impactor acoustic impedance gas gun experiment

来源：评论

学校读者我要写书评

暂无评论

Hemoglobin-decorated metal polyphenol network platform featuring antibacterial, antioxidant, and oxygen carrying properties for promoting infected diabetic wound healing

引用

International Journal of Biological Macromolecules 2025年第Pt 1期311卷 143695页

作者： Hu, Haonan Tan, Guitao He, Huan Zhang, Qinqin Tu, Jing State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan430070 China College of Resources and Environment Huazhong Agricultural University Wuhan430070 China

Chronic wounds have emerged as a formidable challenge in diabetes management, leading to high morbidity and mortality. The diabetic wound healing is often impaired due to recurrent bacterial infections, excessive reactive oxygen species (ROS), and severe hypoxia. Thus, we developed a multifunctional nanoplatform that exhibited remarkable antibacterial activity, ROS scavenging and oxygen-carrying properties. Metal-phenol network (MPN) as core material was synthesized by assembling tannic acid (TA) with Fe2⁺ via coordination and hydrophobic interactions. Subsequently, hemoglobin (Hb) was decorated onto MPN surface through cation-π interactions. MPN protected Hb against oxidation and preserved its physiological function, facilitating oxygen transport. Moreover, MPN-Hb displayed robust and broad-spectrum antioxidant activity that can effectively scavenge ROS and reactive nitrogen species. Under near-infrared (NIR) irradiation, MPN-Hb demonstrated excellent bactericidal activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), effectively eradicated biofilms through hyperthermia. In vivo studies have shown that MPN-Hb with good biocompatibility could effectively eliminate bacteria at the wound site, mitigate the inflammatory response, and promote collagen deposition and angiogenesis, thereby accelerating wound healing. Overall, this multifunctional nanoplatform offers a straightforward, safe, and efficient therapeutic strategy for treating chronic diabetic wounds. © 2025 Elsevier B.V.

关键词： Escherichia coli

来源：评论

学校读者我要写书评

暂无评论

Trace of Atomically Dispersed Pd Enables Unprecedented Butadiene Semihydrogenation Performance Over Copper Catalyst

引用

ACS Catalysis 2025年第5期15卷 3810-3822页

作者： Zhao Wang Hao Yuan Jian Tao Shu-Lin Liu Ying Hong Zhi-Yi Hu Jian Zhang Bao-Lian Su The State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan Hubei 430070 P. R. China State Key Laboratory of Solidification Processing School of Materials Science and Engineering Northwestern Polytechnical University Xi’an Shaanxi 710000 P. R. China The State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan Hubei 430070 P. R. China；Laboratory of Inorganic Materials Chemistry (CMI) University of Namur 61 rue de Bruxelles Namur B-5000 Belgium

Semihydrogenation plays a key role in industrial hydrorefining of light alkenes, with a market above 400 billion by 2027. The high cost of commercial palladium-based catalysts strongly calls for innovation but with great challenges. Herein, copper nanoparticles decorated with a minimized ppm of Pd are developed through a chemical plating process to integrate the catalytic advantages of copper and palladium for achieving maximized catalysis in the semihydrogenation of a fatal impurity of butadiene in alkene feedstocks. The developed Pd–Cu catalyst (i.e., 114 ppm of Pd in Pd0.0033Cu1/TiO2) exhibits an unprecedented catalytic performance superior to commercial Pd/Al2O3, with 100% butene selectivity above 90% of butadiene conversion over 130 h on stream at 90 °C. Further exploration reveals that the atomically dispersed Pd on Cu nanoparticles, obtained at ultralow ppm levels of Pd loading, induces a hidden but critical H2trap, which concentrates H2on the Pd site for further H2dissociation that offers intermediate hydrogen atoms to the tandem butadiene semihydrogenation over the third layer of Cu atoms neighboring Pd through hydrogen spillover. Moreover, a threshold on Pd density was identified at Pd/Cu surficial atomic ratio of 1/138 (i.e., Pd0.0033Cu1/TiO2) for maximizing butadiene semihydrogenation performance, based on an extreme collaboration between Pd for H2dissociation and Cu for butadiene hydrogenation. This work provides important guidance for developing noble metal-saving catalysts in industrial applications.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Influences of particle size and composition on the hydrolysis behavior of MgO·nAl2O3 spinel

引用

Ceramics International 2025年

作者： Cao, Mengying Tu, Guangsheng Huang, Qing Liao, Jiaxing Jing, Zhengyang Chen, Bowen Tu, Bingtian Wang, Hao Wang, Weimin Fu, Zhengyi State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China Hubei Longzhong Laboratory Hubei Xiangyang441000 China

The hydrolysis characteristic of MgO·nAl2O3 powders poses significant challenges for fabricating large-sized and complex-shaped transparent ceramic components. In this work, the hydrolysis behavior of MgO·nAl2O3 powders with designed particle size and chemical composition was systematically investigated. The results ascertained that coarse MgAl2O4 powders synthesized at higher temperatures exhibited reduced surface-active sites, and alumina-rich spinel surfaces exposed decreased unsaturated Mg atoms that catalyze water dissociation. The OH− concentrations in MgAl2O4-coarse and MgO·1.8Al2O3 suspensions were 63 % and 32 % of that in MgAl2O4-fine one, respectively, indicating an effective inhibition of the hydrolysis reaction. Ultimately, the hydrolysis mechanism of MgO·nAl2O3 was elucidated, where the boehmite protective layer (∼15 nm) formed on the particle surface after hydrolysis. This study provides a fundamental understanding of the surface properties and hydrolysis behavior of MgO·nAl2O3, which is of great significance for the preparation of spinel transparent ceramics using aqueous gel-casting. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Surface reactions

来源：评论

学校读者我要写书评

暂无评论

Light tuning CO/H_(2)composition on Ag:Unraveling CO_(2)mass transfer and electron-phonon coupling in plasmon-enhanced electrocatalysis

引用

Nano Research 2025年第1期18卷 173-185页

作者： Rui Lin Dong Fan Luca MBerger Thomas Possmayer Yu Zhou Jiexin Zhu Xingbao Chen Wen Luo Lars Allmendinger Andreas Tittl Leonardo de Souza Menezes Guillaume Maurin Shihe Yang and Stefan AMaier Nanoinstitute Munich Faculty of PhysicsLudwig-Maximilians-Universität München80539 MunichGermany Institut Charles Gerhardt Montpellier UMR 5253 CNRS ENSCM UniversitéMontpellierPlace E.Bataillon34090 MontpellierFrance Guangdong Provincial Key Lab of Nano-Micro Material Research School of Advanced MaterialsPeking University Shenzhen Graduate SchoolShenzhen 518055China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Faculty of Chemistry and Pharmacy Ludwig-Maximilians-Universität München81377 MunichGermany Departamento de Física Universidade Federal de Pernambuco50670-901 Recife-PEBrazil School of Physics and Astronomy Monash University Clayton CampusMelbourneVictoria 3800Australia Department of Physics Imperial College LondonSW72AZ LondonUK

Plasmon-enhanced electrocatalysis(PEEC)is an emerging approach to mitigate CO_(2)*** mechanisms behind CO_(2)adsorption and reduction at the catalyst-electrolyte interface in PEEC still need to be further ***,we employ a well-defined Ag nanostructure to elucidate these pivotal *** shining light with wavelengths of 625,525,405 nm on Ag,an adjustable CO/H_(2)ratio from 35 to 1 can be *** reaction pathway changing under plasmonic excitation does not originate from the lowered CO_(2)mass transfer in the vicinity of Ag,as the electrochemical quartz crystal microbalance results unravel that a slightly elevated temperature in bulk electrolyte caused by light irradiation cannot weaken the CO_(2)adsorption at the Ag catalyst-electrolyte *** calculations reveal that optical excitation towards shorter wavelengths leads to a progressive lowered energy barrier for H_(2)formation together with an enhanced energy barrier for^(*)COOH *** thermodynamically suppressed,CO_(2)reduction can still be improved kinetically by optimizing the excitation wavelength and intensity,being accompanied with the enhanced *** absorption spectroscopy results further correlate the higher photocurrent with a prolonged electron-phonon coupling time,verifying that the improvement of CO_(2)reduction kinetics in PEEC can be realized by hot electron harnessing.

关键词： plasmonic catalysis photoelectrochemical CO_(2)reduction CO/H_(2)ratio hot electron generation electronphonon coupling thermal effect

来源：评论

学校读者我要写书评

暂无评论

Unveiling the top-down crystallization mechanism: Balancing diffusion and crystallization in vapor–solid reactions for efficient perovskite solar cells

引用

Journal of Energy Chemistry 2025年 108卷 263-271页

作者： Duan, Changyu Hu, Shenghan Dou, Yichen Deng, Xinyu Jiang, Xiongzhuang Peng, Yong Liang, Guijie Cheng, Yi-Bing Ku, Zhiliang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China Hubei Key Laboratory of Low Dimensional Optoelectronic Material and Devices Hubei University of Arts and Science Hubei Xiangyang441053 China Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Guangdong Foshan528200 China

Vapor deposition is a promising technique for industrializing perovskite solar cells, but limited understanding of crystallization mechanisms in vapor-phase processes hampers progress. This study reveals a top-down crystallization growth mechanism during a two-step vapor–solid reaction and introduces an accelerated diffusion-buried homogeneous seed (AD-BHS) strategy. By utilizing the rapid diffusion of methylammonium chloride and inducing crystallization with buried seeds, we eliminate residual lead iodide, reduce crystallization time disparities across the film, and enhance uniformity. As a result, we achieve efficiencies of 22.40% for small-area (0.148 cm2) cells and 19.75% for large-area (10.0 cm2) modules, both representing state-of-the-art performance for vapor–solid reaction-based perovskite solar cells. This study provides critical insights into regulating crystallization growth in vapor-deposited perovskite thin films. © 2025 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences

关键词： Plasma CVD

来源：评论

学校读者我要写书评

暂无评论

Ablation behavior and mechanism of MoSi2/mica/HSM modified CF/BPR composites during prolonged ablation of oxyacetylene flame

引用

Ceramics International 2025年

作者： Zhang, Shiquan Zhang, Jian Hu, Sheng Zhang, Ruizhi Li, Junguo Shen, Qiang State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Xiangyang441000 China School of Chemical and Environment Engineering Hubei Minzu University Enshi445000 China

Ablative thermal protection materials are widely used in entry and re-entry vehicles which benefit from their strong adaptability. However, long-term ablation has been a limitation due to the consumption of the matrix of the ablative materials. In this work, the microstructure evolution and ablation properties of the MoSi2/mica-modified CF/BPR composites with and without hollow silicate glass microspheres (HSMs) under protracted ablation have been investigated. The mass ablation rates decreased while the linear ablation rates increased when the ablation times were prolonged. The composites with 30 vol.% HSMs have good insulation properties, shown by a lower backside temperature of 240.9 °C after 100 s of ablation. The decrease in thermal conductivity limited heat transfer in both the axial and horizontal directions. This led to heat concentration and severe ablation at the central surface. The three-dimensional porous and the ladder structure formed in the transfer region, and the features gradually disappeared while extending the ablation times because of the flame erosion and formed liquid phases. The heat diffusion and concentration within the matrix established a gradient temperature field, which determined the ablation behavior and mechanism, providing valuable insights for the development of advanced ablative thermal protection materials. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Silicates

来源：评论

学校读者我要写书评

暂无评论

Improving the electrochemical performance of Prussian-Blue-analogue cathode by the co-doping of cobalt and nickel and its application in aqueous hybrid ions battery

引用

Electrochimica Acta 2025年 528卷

作者： Lin, Dian Hua, Ruiqing Yang, Hongwei Xu, Caiyun Yang, Sheng Chen, Jiajun Qu, Deyu Li, Xi Liu, Dan Department of Chemistry School of Chemistry Chemical Engineering and Life Science Wuhan University of Technology 122 Luoshi Road Hubei Wuhan430070 China State Key Laboratory of Advanced Technology for Material Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology 122 Luoshi Road Hubei Wuhan430070 China

Prussian blue and its analogues are promising electrode materials for the potassium ion batteries due to their large interstitial sites and three-dimensional porous framework. In this work, a series of Ni-co-doped Prussian blue analogues, Ni-Co hexacyanoferrate (NixCoyHCF), with various Ni/Co ratios are synthesized. Through the electrochemical investigation, the Prussian blue analogue with optimized ratio of Co and Ni coordinated with the CN, the NixCoyHCF materials exhibit enhanced performance as compared with that of the corresponding undoped counterparts. Specifically, the Ni1Co1HCF material delivers a high initial capacity of 101.6 mAh g-1 with a capacity retention of close to 100 % after 250 cycles, which reflects excellent cycle stability. Moreover, the Ni1Co1HCF material has excellent rate capability compared to NiHCF material. The capacity of the Ni1Co1HCF material under high current 2000 mA g-1 is >86.5 % of that under 50 mA g-1. After pairing with zeolite template carbon (ZTC) anode, the full cell provides an operational voltage of 1.60 V, a capacity of 54 mAh g-1 at 100 mA g-1, and 75.7 % capacity retention at 2000 mA g-1 along with the low self-discharge rate. © 2025

关键词： Semiconductor doping

来源：评论

学校读者我要写书评

暂无评论

Large-scale manufacturing sulfide superionic conductor for advancing all-solid-state batteries

引用

Matter 2025年

作者： Wang, Shuo Lou, Chenjie Wu, Xinbin Lin, Jing Gautam, Ajay Li, Shenghao Huang, Jielei Cheng, Zhu Zhang, Shengnan Zhang, Xin Strauss, Florian Brezesinski, Torsten Luo, Guoqiang Tang, Mingxue Shen, Yang Lin, Yuanhua Nan, Ce-Wen Center of Smart Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Material Science and Engineering Wuhan University of Technology Wuhan430070 China Center for High Pressure Science and Technology Advanced Research Beijing100094 China State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Beijing100084 China Kaiserstr. 12 Karlsruhe76131 Germany Department of Radiation Science and Technology Delft University of Technology JB Delft2629 Netherlands

Lithium argyrodites with high ionic conductivities are favorable solid electrolytes (SEs) for all-solid-state batteries (ASSBs). However, their low preparation efficiency and poor cycling performance hinder their large-scale applications. In this work, we demonstrate successful large-scale production (over 1 kg per batch for the first time) of Li5.5PS4.5Cl0.75Br0.75 (LPSCB) by fast dry mixing followed by annealing, which presents high room temperature ionic conductivities of 13 mS cm−1 for cold-pressed and 25 mS cm−1 for sintered pellets. Combining neutron powder diffraction and 6Li → 7Li tracer-exchange nuclear magnetic resonance (NMR) spectroscopy measurements, we show that intercage jumps frequently occur through the 48h-16e-48h pathway in LPSCB, promoting the overall lithium conduction. The assembled ASSBs using LPSCB and a LiNi0.83Co0.11Mn0.06O2 electrode can be cycled for over 2,500 cycles at a 0.5 C rate and 1,800 cycles at a 2 C rate without any capacity degradation. Our results will accelerate the commercialization of sulfide SE for ASSBs. © 2025 Elsevier Inc.

关键词： Neutron powder diffraction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：