The texture of interfacial zone between cement paste and quartz in the cement-based composites containing polyvinyl alcohol (PVA), methylcellulose (MC) and their potyblend in an amount of 10 wt % with respect to cemen...
详细信息
The texture of interfacial zone between cement paste and quartz in the cement-based composites containing polyvinyl alcohol (PVA), methylcellulose (MC) and their potyblend in an amount of 10 wt % with respect to cement, as well as the texture of dehydrated bodies of PVA, MC, and the potyblend solutions, were investigated with SEM. The network texture of the dehydrated polyblend is confirmed by comparing the texture of dehydrated bodies of PVA and MC. The network texture has restrained the movement of polyblend molecules in the cement mortar but is helpful to forming a coherent interface between cement paste and quartz. The key factor of forming the coherent interface is not the neutralization reaction between H + from hydrolysis of quarts: and OH- from hydration of cement, but the electrostatic attraction and the chemical reaction between polar groups on the polyblend molecule and cations and onions from hydrolysis of quartz and hydration of cement, respectively. The model of the coherent interface formation is that excessive [HSiO3]- and [SiO3]2- onions are bonded with the hydrated cations such as Ca2+ and Al3+ , which is confirmed by the gel containing Ca and Si on the quartz surface.
Ultrafine grain tungsten heavy alloys (WHAs) were successfully produced from the nano-crystalline powders using spark plasma *** present study mainly discussed the effects of sintering temperature on the density,micro...
详细信息
Ultrafine grain tungsten heavy alloys (WHAs) were successfully produced from the nano-crystalline powders using spark plasma *** present study mainly discussed the effects of sintering temperature on the density,microstructure and mechanical properties of the *** relative density of 98.12% was obtained at 1 050 ℃,and the tungsten grain size is about 871 *** 1 000 ℃-1 200 ℃,the mechanical properties of the alloys tend to first rise and then goes *** SPS,the alloy exhibits improved hardness (84.3 HRA at 1 050 ℃) and bending strength (987.16 MPa at 1 100 ℃),due to the ultrafine-grained *** fracture mode after bending tests is mainly characterized as intergranular or intragranular fracture of W grains,interfacial debonding of W grains-binding phase and ductile tearing of binding *** EDS analysis reveals a certain proportion of solid solution between W and Ni-Fe binding *** good mechanical properties of the alloys can be attributed to grain refinement and solid solution strengthening.
Flame-retardant mechanism of magnesium oxychloride （M OC） in EP was in-vestigated by limiting oxygen index （LOI）, XRD, SEM, TG-DTG and DSC. The results show that MOC performed well as an inorganic flame-retardant ...
详细信息
Flame-retardant mechanism of magnesium oxychloride （M OC） in EP was in-vestigated by limiting oxygen index （LOI）, XRD, SEM, TG-DTG and DSC. The results show that MOC performed well as an inorganic flame-retardant in EP. When the content of MOC is 50%, the LOI of EP reaches 29.6% and mass of residual char reaches 9.6%. The flame retarde mechanism of MOC is due to the synergies of diluting, cooling, catalyzing char forming and obstructing effects.
The residual stresses on the surface of the d ifferently ground and polished silicon nitride ceramics were measured using X-r ay diffraction and identified by *** effect of the residual stress on the be nding strengt...
详细信息
The residual stresses on the surface of the d ifferently ground and polished silicon nitride ceramics were measured using X-r ay diffraction and identified by *** effect of the residual stress on the be nding strength was *** investigations show that the grinding proces s can introduce subatantial tensile residual stresses up to 290MPa on the surfac e of silicon nitride ceramics,which has a significant effect on reducing the ben ding strength of the ceramics after ***,in comparison with the ceramic s with a rough surface,the ceramics with a mirror image surface may have a lower *** can smooth the residual *** we evaluate the qualit y of the ceramic components after grinding,we must take residual stress into con sideration. The grinding methods and grinding conditions must be carefully selec ted in order to get the favorite residual stress as well as the surface smoothne ss.
A kind of p-type segmented Bi2 Te3/CoSB3 thermoetectric material was preparea oy sparse ptasma sintering（ SPS ） . When the segmented materials were used at the temperature ranging from 300 K to 800 K, the junction t...
详细信息
A kind of p-type segmented Bi2 Te3/CoSB3 thermoetectric material was preparea oy sparse ptasma sintering（ SPS ） . When the segmented materials were used at the temperature ranging from 300 K to 800 K, the junction temperature was optimized, which is about 500 K, and the corresponding length ratio of CoSb3 to Bi2 Te3 is about 15 ： 2. The measured maximum power output of segmented materials is abont 320 W·m^-2, which is about 1.8 times as high as that of monolithic material CoSb3 under the same measuring conditions.
Porous alumina of regular spherical particles was fabricated with the spark plasma sintering （SPS） and then compared to those obtained through conventional hot pressing （HP）. The effects of the parameters of the h...
详细信息
Porous alumina of regular spherical particles was fabricated with the spark plasma sintering （SPS） and then compared to those obtained through conventional hot pressing （HP）. The effects of the parameters of the heating process on porosity were also investigated, Microstructural studies suggest that porous ingots including regular pores be made out of regular spherical alumina particles due to the close sphere packages. A comparative study on the relative necks of the specimens produced by SPS and HP indicates an enhancement of neck growth with SPS. Contrasting the theoretical values to the experimental results over the relative necks indicates that a proper relationship between the relative necks and the porosity can be established by a sintering model.
The microwave magnetic properties of the ball milled FeCo panicles were investigated as functions of ball milling time （ t ） using microwave electromagnetic parameters analysis techniques. The results show that the ...
详细信息
The microwave magnetic properties of the ball milled FeCo panicles were investigated as functions of ball milling time （ t ） using microwave electromagnetic parameters analysis techniques. The results show that the imaginary part of intrinsic dynamic permeability （ ui ） of the ball- milled panicles is much bigger than that of raw powders. ui strongly depends on t and exhibits several slightly damped ferromagnetic resonances. These phenomena are in qualitative agreement with the formation of the corresponding microstructure or the Aharoni ＇ s model of non-uniform exchange resonance modes. The present microwave permeabilhy behavior indicates that nanocrystalline materials with the same grain size may exhibit different properties that depend upon the microstructure, which provides a possibility for manufacturing high performance microwave absorber.
The PAn-PEO-PAn triblock copolymer with the PEG chain length of 400 was synthesized by chemical oxidation copolymerization of aniline and α,ω-bis（p-aminophenyl）poly（ethylene glycol）and characterized by FT-IR and...
详细信息
The PAn-PEO-PAn triblock copolymer with the PEG chain length of 400 was synthesized by chemical oxidation copolymerization of aniline and α,ω-bis（p-aminophenyl）poly（ethylene glycol）and characterized by FT-IR and *** experimental results show that the copolymer particles are of μtypical core-shell structure after the self-assembly process in *** conductivity is much lower than that of the pure *** suspension containing 20 vol% PAn-PEO-PAn tiblock copolymer in silicone oil exhibits.a typical electrorheological （ER） effect in DC electric *** it shows a lower leakage current density than that of the pure PAn-based ER ***,the PEO shell hinders the electric hop among PANI chains and decreases the current density of ER fluids in an external electric *** the same time the interface polarity improves the ER effects.
TiAl/Ti2AlC composites were prepared by in-situ hot pressing of TilAl/C powders mixtures and sintered at different temperatures were investigated by X- ray diffraction （ XRD ） of samples. The reaction procedure of T...
详细信息
TiAl/Ti2AlC composites were prepared by in-situ hot pressing of TilAl/C powders mixtures and sintered at different temperatures were investigated by X- ray diffraction （ XRD ） of samples. The reaction procedure of Ti-Al-C system could be divided into three stnges. Below 900℃ , Ti reacts with Al to form TiAl intermetallics ; above 900 ℃ , C reacts with remain Ti to form TiC triggered by the exothermal reaction of Ti and Al ; TiAl reacts with TiC to produce dense TiAl/Ti2AlC *** the holding stage, ternary Ti2AlC develops to layered polycrystal and composites pyknosis in the meanwhile. The mechanism of synthesis and microstructure was especially discussed.
The temperature field during the whole process of SPS sintering TiB2 -BN sample was numerically simulated based on the simplification of the temperature rising process. The result shows that the highest temperature is...
详细信息
The temperature field during the whole process of SPS sintering TiB2 -BN sample was numerically simulated based on the simplification of the temperature rising process. The result shows that the highest temperature is found in the punch and the heat flows from punch to sample and die in SPS sintering system. In the radial direction, the center temperature of the sample is much higher than the circumference temperature of the sampie. In the axial direction, the center temperature of the sample is lower than the border temperature of the sampie. The temperature difference in the sample is growing bigger in the sintering process and reaches the maximum at the end of the heating-up process.
暂无评论