Polycrystalline samples of Sm partially filled skutterudites SmyFexCo4-xSb12 were prepared by melting and Spark Plasma Sintering technique. The results of Rietveld refinement showed that the obtained SmyFexCo4-xSb12 s...
详细信息
Polycrystalline samples of Sm partially filled skutterudites SmyFexCo4-xSb12 were prepared by melting and Spark Plasma Sintering technique. The results of Rietveld refinement showed that the obtained SmyFexCo4-xSb12 samples possessed filled skutterudite structures. The thermal parameter （B） of Sm is larger than that of Sb, Fe, and Co, indicating that Sm ＂rattled＂ in Sb-icosahedron voids. The effects of filling atom Sm on thermoelectric properties of these compounds were investigated. With the increase of Sm filling fraction （y）, electrical conductivity decreased, Seebeck coefficient increased and had a maximum value when y was 0.38; thermal conductivity reduced and had a minimum value when y was 0. 32. At 750 K, the highest figure of merit of 0.68 was obtained for Sm0.32Fe1.47Co2.53Sb12.
作者：
CAO MingHe TIAN Wei LI MingFa SUN WenHua HU MingJi LIU HanXingState Key Laboratory of Advanced Technology for Materials Synthesis and Processing
Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China
The NaNbO3 powders were synthesized and their crystal structure changes were analyzed by ultrahigh pressure up to 6 *** results indicate that the pure NaNbO3 powders can be synthesized at 300℃ under a pressure of 4 G...
详细信息
The NaNbO3 powders were synthesized and their crystal structure changes were analyzed by ultrahigh pressure up to 6 *** results indicate that the pure NaNbO3 powders can be synthesized at 300℃ under a pressure of 4 GPa, to sig- nificantly restrain the Na element volatilization compared with the traditional syn- thesis method. It is found that the crystal structure of synthesized NaNbO3 changes from low symmetry to high symmetry with the increase of the pressure.
The spores of Ganoderma lucidum were ground and broken to ultrafine particles by high speed centrifugal shearing（HSCS） pulverizer. The characteristics of Ganoderma lucidum spores were analyzed by scanning electron m...
详细信息
The spores of Ganoderma lucidum were ground and broken to ultrafine particles by high speed centrifugal shearing（HSCS） pulverizer. The characteristics of Ganoderma lucidum spores were analyzed by scanning electron microscope （SEM）, Fourier transform infrared spectrophotometry （FTIR）. Ultraviolet-visible pectrophotometer was used to determine the extraction ratio of aqueous solubility polysaccharide between the raw and broken spores. The immunological function on the mice before and after the breaking of spores wan investigated. The experimental results show that after being ground, the sporoderm-broken ratio reachs 100%, the original active ingredients of ganoderma lucidum spores do not change, and the extraction ratio of aqueous solubility polysaccharide is greatly increased by 40.08%. The broken spores show much higher immunological activity comparing with original spores of Ganoderma lucidum.
A new compound,[Co（dien）2]（dienH3）（H3O）7[P2Mo5O23]2·14H2O, has been hydrothermallly synthesized by using Na2MoO4,CoCl2, H3PO4 and dien, and structurally characterized by elemental analysis, X-ray powder dif...
详细信息
A new compound,[Co（dien）2]（dienH3）（H3O）7[P2Mo5O23]2·14H2O, has been hydrothermallly synthesized by using Na2MoO4,CoCl2, H3PO4 and dien, and structurally characterized by elemental analysis, X-ray powder diffraction analysis, SEM, IR and TG analysis. The results show that the compound is composed of a polyanion [P2Mo5O23]2^12, complex [Co（dien）2]^2＋ cation, protonated [dienH3]^3＋ , and forteen crystallization water molecule.
WC-10Co nanocrystalline composite powders prepared by spray pyrogenation-continuous reduction and carburization technology were consolidated by vacuum sintering plus hot isostatic pressing （HIP）. Influences of carbo...
详细信息
WC-10Co nanocrystalline composite powders prepared by spray pyrogenation-continuous reduction and carburization technology were consolidated by vacuum sintering plus hot isostatic pressing （HIP）. Influences of carbon content on properties and microstructure of ultrafine WC-10Co cemented carbide were investigated. The results show that the relative density of the ultrafine WC-10Co cemented carbides can reach 99.72%, and the transverse rupture strength （TRS） was higher than 3 890 MPa, Rockwell A hardness （HRA） was higher than 92.5, the average grain size was less than 460 nm, when carbon content in nanocrystalline composite powder was 5.54wt% and the ball-milled time was 48 hours, ultrafine WC-10Co cemented carbide with excellent properties and homogeneous microstructure was obtained.
A ternary-layered carbide Ti2AlC material could be synthesized by spark plasma sintering（SPS） technology using elemental powder mixture of Ti, Al and active carbon. By means of XRD and SEM, phases were identified an...
详细信息
A ternary-layered carbide Ti2AlC material could be synthesized by spark plasma sintering（SPS） technology using elemental powder mixture of Ti, Al and active carbon. By means of XRD and SEM, phases were identified and microscopically evaluated. The experimental results show that the main phase in the product was fully crystallized Ti2AlC with small particle size when sintered at 1200℃. The synthesis temperature of SPS was 200-400℃ lower than that of hot pressing （HP） or hot isostatic pressing （HIP）. Through thermodynamics calculations, the mechanism of Ti2AlC was studied by calculating changes of Gibbs free energy of reactions.
Serial material model （Dilute model）and Limited Units （LU）method were employed to analyze the performance of binary piezo-composite *** reckoned electric potential deployments illustrated difference while the part...
详细信息
Serial material model （Dilute model）and Limited Units （LU）method were employed to analyze the performance of binary piezo-composite *** reckoned electric potential deployments illustrated difference while the particles were *** piezoelectricities were also calculated according to the model,and furthermore comparation suggested that small particles living in the tolerance improve the piezoelectricity of *** coinciding with analyses were processed simultaneously. Ceramics were milled for different time in order to control the concentration of particle *** results showed that the filled particles enhanced the piezoelectricity of binary piezo-composite system efficiently whereas too many chips deteriorated the performance of piezo-composites.
Nafion/Silicon oxide composite membranes were produced via in situ sol-gel reaction of tetraethylorthosilicate （TEOS） in Nafion membranes. The physicochemical properties of the membranes were studied by FT-IR,TG-DSC...
详细信息
Nafion/Silicon oxide composite membranes were produced via in situ sol-gel reaction of tetraethylorthosilicate （TEOS） in Nafion membranes. The physicochemical properties of the membranes were studied by FT-IR,TG-DSC and tensile strength. The results show that the silicon oxide is compatible with the Nation membrane and the thermo stability of Nation/Silicon oxide composite membrane is higher than that of Nation membrane. Furthermore, the tensile strength of Nation/Silicon oxide composite membrane is similar to that of the Nation membrane. The proton conductivity of Nation/Silicon oxide composite membrane is higher than that of Nation membrane. When the Nation/Silicon oxide composite membrane was employed as an electrolyte in H2/O2 PEMFC, a higher current density value （1 000 mA/cm^2 at 0.38 V） than that of the Nafion1135 membrane （100 mA/cm^2 at 0.04 V） was obtained at 110 ℃.
Grid computing is an active field in high-availability computing. This paper focuses on the numerical calculation of two-dimensional frequency selective surface using the finite difference time domain (FDTD) method on...
详细信息
Grid computing is an active field in high-availability computing. This paper focuses on the numerical calculation of two-dimensional frequency selective surface using the finite difference time domain (FDTD) method on grid-enabled cluster. The result of experiment shows that the evaluation via the parallel FDTD is in good agreement with the result obtained via the traditional FDTD method. The parallel FDTD algorithm is correct and reasonable, which can be extended to other periodic structure and finite exciting sources.
Ti2AlC bulk material was synthesized by hot pressing of mixture powders of TiC, Ti, Al and active carbon. The phase compositions of resultant product at different temperature were detected by X-ray diffractometer. The...
详细信息
Ti2AlC bulk material was synthesized by hot pressing of mixture powders of TiC, Ti, Al and active carbon. The phase compositions of resultant product at different temperature were detected by X-ray diffractometer. The microstructures of the samples were observed by SEM. Finally, the mechanical properties and thermal properties of the sample at 1400 ℃ were measured. The results show that high purity Ti2AlC material with little Ti3AlC2 can be synthesized by hot pressing 0.5TiC/1.5Ti/1.0Al/0.5C at 1 400 ℃. Ti2AlC exhibits high mechanical properties and metallic electrical properties. Its fracture toughness is 7.0 MPa·m1/2, its flexural strength is 384 MPa at room temperature, and its electrical conductivity is 2.56×106 Ω1·m-1 at room temperature.
暂无评论