检索结果-内蒙古大学图书馆

Nonflammable electrolyte with weak-solvation structure for stable NCM811 cathode under high temperature

Journal of Energy Chemistry 2025年第5期104卷 111-117页

作者： Dawei Xu Chao Yang Ailing Yang Xiaowei Liu Meilong Wang Jin Han Tiefeng Liu Ya You State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology International School of Materials Science and Engineering School of Materials Science and Microelectronics Wuhan University of Technology College of Chemical and Biological Engineering Zhejiang University Quzhou Institute of Power Battery and Grid Energy Storage

High-nickel cathode LiNi0.8Co0.1Mn0.1O2（NCM811） could enable lithium-ion batteries （LIBs） with high energy ***,excessive decomposition of the electrolyte would happen in the high operating voltage *** addition,the utilization of flammable organic solvents would increase safety risks in the high temperature ***,an electrolyte consisting of flame-retardant solvents with lower highest occupied molecular orbital （HOMO） level and LiDFOB salt is proposed to address above two *** a result,a thin and robust cathode-electrolyte interface containing rich LiF and Li-B-O compounds is formed on the cathode to effectively suppress electrolyte decomposition in the high operating *** NCM811||Li cell paired with this designed electrolyte possesses a capacity retention of 72% after 300 cycles at 55℃.This work provides insights into developing electrolyte for stable high-nickel cathode operated in the high temperature.

关键词： Electrolyte engineering High temperature High-nickel cathode Safety Weak solvation

来源：评论

学校读者我要写书评

暂无评论

NaTiOx-modified high-nickel layered oxide cathode for stable sodium-ion batteries

引用

Carbon Energy 2025年第1期7卷 283-291页

作者： Yingcong Liu Xing Zhou Dongwei He Xiaowei Liu Chao Yang Dawei Xu Meilong Wang Ruitao Sun Bin Zhang Jingjing Xie Jin Han Wen Chen Ya You State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Yibin Libode New Materials Co.Ltd SichuanChina International School of Materials Science and Engineering School of Materials Science and MicroelectronicsWuhan University of TechnologyWuhan 430070China

The O3-type layered cathode with high Ni content has attracted much attention because of its high capacity and simple synthesis ***,surface side reaction and O3-P3 phase transitions would occur during Na+insertion/extraction,resulting in unsatisfying electrochemical ***,O3-Na[Ni_(0.6)Co_(0.2)Mn_(0.2)]O_(2)(NNCM622)cathode is modified by a NaTiOx coating layer in a wet chemistry method,which reduces the parasitic reaction and facilitates Na+***,the partially doped Ti improves structural stability by restraining the irreversible multiple-phase *** a result,the modified NNCM622 cathode obtains a high specific capacity of 143.4 mAh g^(−1)and an improved capacity retention of 69%after 300 *** work offers new prospects for stabilizing the NNCM622 cathode with a feasible coating strategy.

关键词： cathode high-nickel layered oxides sodium-ion battery surface modification

来源：评论

学校读者我要写书评

暂无评论

Rare Earth Elements(La,Ce,Pr)Modified Co/NC Catalyst for Efficient and Stable Ammonia Decomposition to Hydrogen Production

引用

Journal of Wuhan University of technology(materials Science) 2024年第6期39卷 1372-1378页

作者： ZHU Yi PAN Hongfei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China National Energy Key Laboratory for New Hydrogen-ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528200China

Co/NC catalysts modified with rare earth elements(La,Ce,Pr)were prepared by pyrolysis of rare earth elements doped *** experimental results show that the modification of rare earth elements significantly improves the ammonia decomposition activity and stability of the Co/NC *** La-Co/NC catalyst can achieve an 82.3%ammonia decomposition and 18.4 mmol hydrogen production rate at 550℃with a GHSV of 20000 cm^(3)·h^(-1).Furthermore,no obvious performance degradation is observed after 72 hours of reaction for all rare earth elements modified *** is shown that the modification of rare earth elements significantly improves the surface alkalinity and surface chemical state of the catalyst,and thus improves the ammonia decomposition activity of the catalyst.A new type of high-performance ammonia decomposition Co-based catalyst is proposed,and the promoting effect of rare earth elements on the activity of ammonia decomposition is revealed.

关键词： hydrogen carrier hydrogen production ammonia decomposition rare earth elements cobalt-based catalysts

来源：评论

学校读者我要写书评

暂无评论

A numerical method for predicting bursting strength of composite rocket motor case considering filament winding process-induced stress

引用

Chinese Journal of Aeronautics 2025年第2期38卷 505-518页

作者： Jiqiu LIANG Fei ZHAO Dan WU Anxin DING Hubei Key Laboratory of Advanced Aerospace Propulsion Technology Wuhan 430040China System Design Institute of Hubei Aerospace Technology Academy Wuhan 430040China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

A numerical method to predict the bursting strength of filament wound composite rocket motor case is proposed *** method can evaluate the longitudinal stress evolution of each composite layer as impregnated filaments with fiber tension are wound layer by layer,and consider the effects of accumulated stress and deformation during filament winding on the bursting strength of composite ***∅520 mm composite cases as a case study,the filament-winding-process-induced stress and deformation as well as progressive damage behavior are numerically predicted,followed by a comparison with experimental *** numerical results show that the predicted bursting pressures for composite cases manufactured on the mandrels with and without a flexible component are 14.20 MPa and 21.40 MPa,*** values exhibit slight deviation from the measured pressures of 13.50 MPa and 21.57 ***,the predicted damage locations,situated respectively in the dome and cylinder,agree well with the experimental *** observations indicate that use of flexible component reduces the load-bearing capacity of the ***,it validates the reliability and accuracy of the proposed numerical method in predicting the bursting strength of composite cases.

关键词： Composite case Fiber tension Bursting strengt hProgressive damage analysis Filament winding

来源：评论

学校读者我要写书评

暂无评论

Valence Bands Convergence in p-Type CoSb_(3) through Electronegative Fluorine Filling

引用

Chinese Physics Letters 2024年第7期41卷 87-94页

作者：黄写格李家良马浩钦李昌隆刘天乐段波翟鹏程李国栋 Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of TechnologyWuhan 430070China School of Civil Engineering&Architecture Wuhan Polytechnic UniversityWuhan 430023China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Band convergence is considered to be a strategy with clear benefits for thermoelectric performance,generally favoring the co-optimization of conductivity and Seebeck coefficients,and the conventional means include elemental filling to regulate the ***,the influence of the most electronegative fluorine on the CoSb_(3) band remains *** carry out density-functional-theory calculations and show that the valence band maximum gradually shifts downward with the increase of fluorine filling,lastly the valence band maximum converges to the highly degenerated secondary valence bands in fluorine-filled skutterudites.

关键词： valence Convergence bands

来源：评论

学校读者我要写书评

暂无评论

Cr-doped Na_(3)V_(2)(PO_(4))_(3)@C enables high-capacity with V^(2+)/V^(5+)reaction and stable sodium storage

引用

Journal of materials Science & technology 2023年第34期165卷 1-7页

作者： Bo Mai Boyu Xing Yunfan Yue Nianyao Cai Congcong Cai Sitian Lian Hao Fan Mengyu Yan Ting Zhu Ping Hu Xuewen Wang Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong LaboratoryFoshan 528216China

Due to its abundant sodium content and low cost,sodium-ion battery(SIB)has become an effective substitute and supplement for lithium-ion batteries,which has a broad development prospect in largescale energy storage ***-super-ionic conductor(NASICON)structural materials have stable 3D skeleton structures and open Na+transport channels,which is a very promising SIB cathode *** in the typical NASICON material Na_(3)V_(2)(PO_(4))_(3)(NVP),the number of electrons involved in NVP per formula unit is less than 2 at the stable voltage window,which limits the further improvement of battery *** this work,we report another NASICON structured Na_(3)V_(4/3)Cr_(2/3)(PO_(4))_(3)@C(NVCP@C),which is obtained by Cr-doped NVP through spray *** taking full advantage of the voltage platforms of V^(5+/4+),V^(4+/3+),and V^(3+/2+)in the window of 1.5-4.4 V,NVCP@C delivered a high discharge capacity(175 mAh g^(-1))and durable cyclability(86%capacity retention for 2000 cycles).In-situ X-ray diffraction results demonstrate that the reversible structural evolution accompanies by solid-solution reaction and two-phase reaction mechanisms co-exist during charge/discharge *** coupled with Na^(+)preembedded hard carbon(HC),the assembled NVCP@C//HC full cell delivers a high capacity(105 mAh g^(-1))and long cycling performance(70%after 1000 cycles).This Cr-doped NVP method offers new insights into the design of high-energy NASICON-structured cathode materials.

关键词： Sodium-ion batteries NASICON Na_(3)V_(4/3)Cr_(2/3)(PO_(4))_(3)@C Spray drying V^(2+)/V^(5+)reaction

来源：评论

学校读者我要写书评

暂无评论

Improving Cyclic Stability and Rate Performance of Lithium Ion Batteries Using La^(3+)Modified LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)Cathode materials

引用

Journal of Wuhan University of technology(materials Science) 2023年第4期38卷 735-742页

作者：杜玉喆 RUAN Zhefei ZHANG Ruiming 张海宁 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan528200China

La_(4)NiLiO_(8)-coated NCM622 samples were prepared through a sol-gel method,and the electrochemical performance as cathode materials was *** is revealed that part of the introduced La^(3+)ions produce a coating layer on the surface of NCM622 particles,while the rest occupy the 3b position of the *** optimized sample exhibits a capacity retention of 96.54%after 100 cycles under 1C rate with a discharge specific capacity of 117.54 mAh·g^(-1)under 5C rate,much higher than those of the unmodified *** results show that the addition of La^(3+)ion can greatly improve the cyclic stability and the rate performance of NCM622.

关键词： lithium ion batter La^(3+)doping NCM622 cycling stability rate performance

来源：评论

学校读者我要写书评

暂无评论

Swarming Magnetic Fe_(3)O_(4)@Polydopamine-Tannic Acid Nanorobots:Integrating Antibiotic-Free Superficial Photothermal and Deep Chemical Strategies for Targeted Bacterial Elimination

引用

Research 2025年第1期2024卷 840-853页

作者： Luying Si Shuming Zhang Huiru Guo Wei Luo Yuqin Feng Xinkang Du Fangzhi Mou Huiru Ma Jianguo Guan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and EngineeringWuhan University of TechnologyWuhanChina Wuhan Institute of Photochemistry and Technology WuhanChina School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhanChina

Micro/nanorobots(MNRs)are envisioned to provide revolutionary changes to therapies for infectious diseases as they can deliver various antibacterial agents or energies to many hard-to-reach infection ***,existing MNRs face substantial challenges in addressing complex infections that progress from superficial to deep ***,we develop swarming magnetic Fe3O4@polydopamine-tannic acid nanorobots(Fe3O4@PDA-TA NRs)capable of performing targeted bacteria elimination in complicated bacterial infections by integrating superficial photothermal and deep chemical *** Fe3O4@PDA-TA nanoparticles(NPs),serving as building blocks of the nanorobots,are fabricated by in situ polymerization of dopamine followed by TA *** driven by alternating magnetic fields,Fe3O4@PDA-TA NPs can assemble into large energetic microswarms continuously flowing forward with tunable ***,the swarming Fe3O4@PDA-TA NRs can be navigated to achieve rapid broad coverage of a targeted superficial area from a distance and rapidly eradicate bacteria residing there upon exposure to near-infrared(NIR)light due to their efficient photothermal ***,they can concentrate at deep infection sites by traversing through confined,narrow,and tortuous passages,exerting sustained antibacterial action through their surface TA-induced easy cell adhesion and subsequent membrane ***,the swarming Fe3O4@PDA-TA NRs show great potential for addressing complex superficial-to-deep *** study may inspire the development of future therapeutic microsystems for various diseases with multifunction synergies,task flexibility,and high efficiency.

关键词： therapies infectious diseases complex infections chemical therapy magnetic nanoparticles polydopamine photothermal therapy targeted bacteria elimination tannic acid

来源：评论

学校读者我要写书评

暂无评论

Preparation of TiO_(2) Supported Mxene Catalyst for High Efficiency Hydrogen Production

引用

Journal of Wuhan University of technology(materials Science) 2023年第2期38卷 286-291页

作者： HU Mei XIN Jin LIU Zhenyu ZENG Hui WANG Yanze Wuhan Institute of Marine Electric Propulsion Wuhan430064China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

We studied a method to prepare a novel titanium dioxide(TiO_(2))composite photocatalyst,starting from improving the separation efficiency of photogenerated electrons and *** TiO_(2)microspheres were prepared by sol-gel method and loaded onto Ti3C2Tx(Mxene).The high electrical conductivity of Mxene was utilized to transfer photogenerated electrons quickly and effectively prevent their *** adjusting the addition amount of Mxene,the hydrogen production efficiency of the sample was greatly improved,and the maximum efficiency reached 135.2μmol·g^(-1)·h^(-1),which was twice that of pure TiO_(2).The nanocomposites were characterized by XRD,PL,TEM and SEM analysis and electrochemical methods,and the test proved that the improvement of hydrogen production efficiency was caused by the improvement of the separation efficiency of photogenerated electrons and *** work demonstrates the application of Mxene as a catalyst to improve efficiency and broadens the application prospects of Mxene.

关键词： TiO_(2) Mxene hydrogen production photocatalysis

来源：评论

学校读者我要写书评

暂无评论

NiSe nanoparticles anchored on hollow carbon nanofibers with enhanced rate capability and prolonged cycling durability for sodium-ion batteries

引用

Rare Metals 2025年第1期44卷 185-194页

作者： Li-Jun Xu Xue-Jie Wang Guo-Yu Tang Bi-Cheng Zhu Jia-Guo Yu Liu-Yang Zhang Tao Liu Faculty of Materials Science and Chemistry China University of GeosciencesWuhan 430078China School of Chemistry and Physics Queensland University of TechnologyBrisbaneQLD 4000Australia State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Nickel selenides have been studied as potential anode materials for sodium-ion batteries due to their high theoretical ***,the low electrical conductivity and the large volumetric variation during the charging/discharging process greatly reduce the specific capacity and cycling lifespan of the *** this paper,a simple strategy to fabricate NiSe nanoparticles enclosed in carbon hollow nanofibers(NiSe/C@CNF)is proposed,involving the preparation of Ni-precursor nanofibers by electrospinning,the coating of polydopamine and the formation of NiSe/C@CNF by calcination and *** combination of NiSe nanoparticles and porous carbon hollow nanofibers creates a strong conductive environment,which enhances the dynamic ability of sodium-ion transport and improves charge storage *** fabricated NiSe/C@CNF material exhibits excellent *** demonstrates a high rate capability,with specific capacities of 406.8 and 300.1 mAh·g^(-1)at 0.1 and 5.0 A·g^(-1),*** results highlight the potential of NiSe/C@CNF as an anode material for sodium-ion batteries,offering a large capacity and long life.

关键词： Nickel selenide Hollow porous structure Sodium storage Anode material

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：