检索结果-内蒙古大学图书馆

高电压技术 2013年第4期39卷 805-812页

作者： DING Dengwei GAO Wensheng LIU Weidong State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua University

To monitor the condition of online power apparatus accurately and provide appropriate guidance on their maintenance,a fundamental ultra-high frequency(UHF) database of partial discharges corresponding to different types of defects is presented for the observation of insulation state of gas insulated switchgear(GIS).In order to imitate the defects in a GIS online,five types of typical partial discharge(PD) sources(*** metal,protrusion,bouncing particles,void in spacer,and particle on the surface of solid insulation) were designed and fabricated.A wideband UHF sensor and an amplifier were applied to obtain UHF *** on the characteristics of the five different defects,nine meaningful parameters which were independent of the phase of the applied voltage were extracted from the PD samples and then *** this paper,Fisher discriminant analysis(FDA),a pattern recognition algorithm,was applied for the purpose of classifying the *** this way,there was no need to set complicated parameters and kernel function,and the total discrimination accuracy of test samples was 97.6%.It indicates that based on the nine especial parameters,the typical defects in GIS can be identified exactly by means of *** the analysis method could be possibly regarded as a universal classification method.

关键词： Fisher判别分析绝缘缺陷局部放电 GIS 气体绝缘开关地理信息系统在线监测识别算法

来源：评论

学校读者我要写书评

暂无评论

Design and engineering implementation of non-supplementary fired compressed air energy storage system: TICC-500

引用

Science China(Technological Sciences) 2015年第4期58卷 600-611页

作者： MEI Sheng Wei WANG Jun Jie TIAN Fang CHEN Lai Jun XUE Xiao Dai LU Qiang ZHOU Yuan ZHOU Xiao Xin State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical EngineeringTsinghua University Key Laboratory of Cryogenics Technical Institute of Physics and Chemistry Chinese Academy of Sciences Department of Power Systems China Electric Power Research Institute

The integration and accommodation of the wind and solar energy pose great challenges on today’s power system operation due to the intermittent nature and volatility of the wind and solar *** efficient large-scale electrical energy storage is one of the most effective and economical solutions to those *** the comprehensive review of the existing storage technologies,this paper proposes an overall design scheme for the Non-supplementary Fired Compressed Air Energy Storage(NFCAES)system,including system design,modeling and efficiency assessment,as well as protection and ***,the design principles of the multistage regenerative,*** recovery system which is used to fully recycle and utilize the waste heat from compression are provided,so as the overall system efficiency evaluation *** paper theoretically ascertains the storage decoupling rules in the potential and internal energy of molecular compressed air and reveals the conversion mechanism of gas,heat,power,electricity and other forms of *** this basis,a 500-k W physical simulation system of CAES system(TICC-500,Tsinghua-IPCCAS-CEPRI-CAES)is built,which passed a system-wide 420-k W load power generation test with less pollution and zero carbon ***,the multi-form energy conversion of multi-stage regenerative CAES and storage efficiency is verified,especially its incomparable superiority in solving the uncertainty problem in wind and solar power ***,the propaganda and application scenario of the CAES system in China is introduced.

关键词： index terms-compressed air energy storage non-supplementary fired regenerative/heat recovery multi-stage expansion TICC-500

来源：评论

学校读者我要写书评

暂无评论

Distribution system fault location method using reclosure-generating traveling waves

Distribution system fault location method using reclosure-ge...

引用

2020 IEEE power and Energy Society General Meeting, PESGM 2020

作者： Dong, Xinzhou Wang, Haozong Xin, Zeyu Shi, Shenxing Wang, Bin Tsinghua University State Key Lab. of Control and Simulation of Power System and Generation Equipment Dept. of Electrical Engineering Beijing China

ISBN: (纸本)9781728155081

Fault location in distribution systems includes 2 subtasks: fault distance estimation and fault section identification. This paper presents a fault location method based on reclosure-generating traveling waves and system topology. Firstly, the reclosure-generating traveling waves under normal and fault conditions are analyzed to find the traveling wave reflected by fault point, through which the fault distance could be estimated. Secondly, we propose a fault section identification method by comparing real measured traveling waves with simulated traveling waves with different potential fault points. Noticing that only time information of traveling waves rather than their magnitude is necessary, instead of using electromagnetic transient simulation, we also present a simplified simulation algorithm that only focuses on the arrival time of traveling waves based on priority queue. Experiments demonstrate that the proposed method can locate fault points in high accuracy with low computational burden. © 2020 IEEE.

关键词： Location

来源：评论

学校读者我要写书评

暂无评论

Stochastic processes in renewable power systems: From frequency domain to time domain

引用

Science China(Technological Sciences) 2019年第12期62卷 2093-2103页

作者： SONG YongHua CHEN XiaoShuang LIN Jin LIU Feng QIU YiWei Department of Electrical and Computer Engineering University of MacaoMacaoChina State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijing 100084China

With the increasing penetration of renewable energy resources(RESs), the uncertainties of volatile renewable generations significantly affect the power system operation. Such uncertainties are usually modeled as stochastic variables obeying specific distributions by neglecting the temporal correlations. Conventional approaches to hedge the negative effects caused by such uncertainties are thus hard to pursue a trade-off between computation efficiency and optimality. As an alternative, the theory of stochastic process can naturally model temporal correlation in closed forms. Attracted by this feature, our research group has been conducting thorough researches in the past decade to introduce stochastic processes within renewable power systems. This paper summarizes our works from the perspective of both the frequency domain and the time domain, provides the tools for the analysis and control of power systems under a unified framework of stochastic processes, and discusses the underlying reasons that stochastic process-based approaches can perform better than conventional approaches on both computational efficiency and optimality. These work may shed a new light on the research of analysis, control and operation of renewable power ***, this paper outlooks the theoretic developments of stochastic processes in future’s renewable power systems.

关键词： renewable energy resources renewable power systems stochastic processes frequency domain time domain

来源：评论

学校读者我要写书评

暂无评论

Nonlinear dynamic characteristic analysis of a vertical mass unbalanced rotor

Nonlinear dynamic characteristic analysis of a vertical mass...

引用

23rd International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2010

作者： An, Xueli Jiang, Dongxiang Liu, Chao Zhao, Minghao State Key Laboratory of Control and Simulation of Power System Generation Equipment Department of Thermal Engineering Tsinghua University Beijing China

ISBN: (纸本)9784883254194

The dynamic properties between torsional and bending vibrations of a vertical mass unbalanced rotor are described. The equation of rotor system motion is obtained by Lagrangian dynamics without considering the external actuating forces and torque, shows coupling effect and nonlinear interaction between the rotor system bending and torsional vibrations. An attempt of theoretical analysis and numerical simulation is made to reveal dynamic characteristics of a rotor system. Theoretical analysis of the rotor dynamic equations based on perturbation theory indicates that at stable state of vibration the coupled effect on the rotor system is nonexistent and the bending vibration becomes equal amplitude with shafting speed at stable vibration state. While the torsional vibration keeps on attenuating until it stops. In addition, the numerical simulation results to the dynamic equations, show that coupled torsional and bending vibrations are induced by mass eccentricity, and coupled effect can only be found in vibration initial state of the rotor system. Other numerical simulation results are consistent with the theoretical analysis.

关键词： Perturbation techniques

来源：评论

学校读者我要写书评

暂无评论

Nanopowder production by gas-embedded electrical explosion of wire

引用

Chinese Physics B 2013年第4期22卷 350-353页

作者：邹晓兵毛志国王新新江伟华 State Key Laboratory of Control and Simulation of Power System and Generation Equipments Department of Electrical Engineering Tsinghua University Department of Physics and Chemistry College of Science North China University of Technology

A small electrical explosion of wire （EEW） setup for nanopowder production is constructed. It consists of a low inductance capacitor bank of 2 μF–4 μF typically charged to 8 kV–30 kV, a triggered gas switch, and a production chamber housing the exploding wire load and ambient gas. With the EEW device, nanosize powders of titanium oxides, titanium nitrides, copper oxides, and zinc oxides are successfully synthesized. The average particle size of synthesized powders under different experimental conditions is in a range of 20nm–80nm. The pressure of ambient gas or wire vapor can strongly affect the average particle size. The lower the pressure, the smaller the particle size is. For wire material with relatively high resistivity, such as titanium, whose deposited energy Wd is often less than sublimation energy W s due to the flashover breakdown along the wire prematurely ending the Joule heating process, the synthesized particle size of titanium oxides or titanium nitrides increases with overheat coefficient k （k = W d /Ws ） increasing.

关键词： electrical explosion of wire nanosized powders particle size

来源：评论

学校读者我要写书评

暂无评论

On Dispatching power systems with Significant Wind generation Using Disturbance Feedbacks

On Dispatching Power Systems with Significant Wind Generatio...

引用

第三十二届中国控制会议

作者： WEI Wei MEI Shengwei LIU Feng State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical EngineeringTsinghua University

ISBN: (纸本)9781479900305

With the rapid development of renewable energies,especially wind power,how to manage unexpected generation variations economically and reliably in dispatch has become crucial for modern power *** address this issue,this paper presents an affine disturbance feedback robust dispatch(ADF-RD) methodology for power systems with large scale wind power integration in the framework of adjustable robust optimization(ARO).This methodology divides the dispatching process into pre-dispatch and ***-dispatch decision immunizes against all possible realizations of uncertainties in a set,while re-dispatch which can be regarded as a feedback will be adaptively adjusted using an affine function with respect to the realized uncertainty in real *** ADF-RD methodology is applied to an hourly ahead dispatch(HAD) *** effectiveness and efficiency of the proposed ADF-RD methodology are demonstrated by numerical experiments carried on a five-bus system.

关键词： Adjustable robust optimization affine disturbance feedback power system dispatch uncertainty wind power

来源：评论

学校读者我要写书评

暂无评论

NUMERICAL simulation OF SURFACE DISCHARGE IN OIL PAPER INSULATION BASED ON FINITE ELEMENT METHOD AND CELLULAR AUTOMATA 22

NUMERICAL SIMULATION OF SURFACE DISCHARGE IN OIL PAPER INSUL...

引用

22nd International Symposium on High Voltage Engineering, ISH 2021

作者： Chen, Jianning Zhou, Yuanxiang Zhang, Yunxiao Huang, Xin Zhang, Ling State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China

ISBN: (纸本)9781839536052

Surface discharge of oil paper insulation is one of the insulation defects in converter transformers. However, the mechanism of surface discharge in oil paper insulation remains unclear. A novel method of surface discharge in oil paper insulation based on finite element method (FEM) and cellular automata (CA) was proposed to study the mechanism and fractal characteristics. Firstly, the needle-plate electrode without normal component of electric field density was adopted as the geometric model, on which the unstructured triangular mesh generation was performed. Then, the FEM is applied to compute the distribution of potential, electric field and charge in the simulated field, which performed better than finite difference method (FDM) in accuracy and complexity of computation. Finally, the CA model was adopted to simulate the development of surface discharge with the electric field threshold. The results indicated that the numerical simulation model based on FEM-CA can simulate the dynamic process and fractal characteristics of surface discharge in oil paper insulation. According to the fractal dimension curve, the surface discharge can be obviously divided into three stages: inception, propagation and flashover. With the increase of applied voltage, the fractal dimension of surface discharge increases in inception stage, then decreases in propagation stage, and finally increases in flashover stage. © 2021 The Institution of Engineering and Technology.

关键词： Cellular automata

来源：评论

学校读者我要写书评

暂无评论

PSIM and SIMULINK Co-simulation for three-level adjustable speed drive systems

PSIM and SIMULINK Co-simulation for three-level adjustable s...

引用

IPEMC 2006: CES/IEEE 5th International power Electronics and Motion control Conference

作者： Yongchang, Zhang Zhengming, Zhao Baihua Liqiang, Yuan Haitao, Zhang State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China

ISBN: (纸本)1424404487

Applying co-simulation technology is a very important trend in power electronics simulation, which can make full use of the merits of different software to improve the efficiency of building up a system. In this paper, a simulation platform for three-level adjustable speed drive (ASD) based on co-simulation of PSIM and SIMULINK is presented, which includes the interface between PSIM and SIMULINK, main circuit in PSIM, space vector pulse width modulation (SVPWM), dead time and minimum pulse width, view of output voltage and its Fourier analysis in SIMULINK Based on this platform, the cause of large current when motor starts is studied. simulation and experimental results show that the minimum pulse width contributes a lot for the large starting current of the ASD. In conclusion, applying the simulation platform introduced in this paper, the dynamic behavior of the three-level ASD can be easily studied, which reduces the cost and improves efficiency at the same time compared to hardware investments, and may help to realize the optimal design of the ASD in practice. © 2006 IEEE.

关键词： Efficiency

来源：评论

学校读者我要写书评

暂无评论

IGBT modeling for analysis of complicated multi-IGBT circuits

IGBT modeling for analysis of complicated multi-IGBT circuit...

引用

2009 2nd Conference on power Electronics and Intelligent Transportation system, PEITS 2009

作者： Deng, Yi Zhao, Zhengming Yuan, Liqiang State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China

ISBN: (纸本)9781424442461

A new IGBT (Insulated Gate Bipolar Transistor) model for simulation of eomplicated multi-IGBT cireuits is presented. Based on the gate chargc and discharge behaviors of IGBT, it piecewise models the turn-on and -off transient oflGBT, and simulates the static characteristics with curve fitting method . With the kcy features of high simulation spccd, easy parameters extraction and clear physical meaning, the model is available for various IGBTs and system level circuits. This paper describes the structure and equivalent circuit of the model in detail, implements it with the simulation tool of PSIM package, and determines the parameters of the model for an IGBT of FF300R12ME3 as an example. The accuracy of the model is verified by the comparison between the simulated and experimental results. ©2009 IEEE.

关键词： Equivalent circuits

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：