检索结果-内蒙古大学图书馆

International Symposium on Electromagnetic Compatibility

作者： Li Xiao Zhanqing Yu Shuiming Chen Bo Zhang Rong Zeng Chijie Zhuang Yang Zeng Xiaoying Yu Qian Zhang State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Research Institute Zoomlion Heavy Industry Science & Technology Development Co. Ltd.

ISBN: (纸本)9781467307185

The Electromagnetic Compatibility (EMC) is a major issue for the truck crane designing, due to the large dimension. The conducted disturbance sources of truck crane was measured under stable conditions, the time domain characteristics of possible conducted disturbance sources was analyzed, and typical waveforms were concluded to solve the EMC (Electromagnetic Compatibility) issue. The electromagnetic disturbance characteristics at different test points under different operation conditions were compared, and the influence of different factors was studied. The amplitude and frequency parameters of the major disturbance sources were compared with the standard immunity test pulses suggested by ISO7637-2. The differences between them indicate that the extant standard might not apply to the test of the truck crane. The presented results could form a basis for the development of a special standard for the EMC test of the truck crane and further relevant EMC research.

关键词： Truck crane EMC Conducted disturbance source Time domain characteristics Electromagnetic immunity test

来源：评论

学校读者我要写书评

暂无评论

IEC61850-based information modeling of 126KV intelligent terminals

IEC61850-based information modeling of 126KV intelligent ter...

引用

International Conference on Advanced power system Automation and Protection (APAP)

作者： Shu-jian Zhang Bin Wang Ming Sun Xin-zhou Dong Tong Sun Run-bin Cao Electrical engineering and automation Hefei University of Technology Baohe District 230009 China State Key Lab of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China School of Automation Nanjing University of Science and Technology Jiangsu 210094 China

The stability and reliability of the intelligent terminal's receiving information affects its control of intelligent switch in operation directly. To achieve reliable intelligent communications terminals, with techniques and methods of IEC61850 modeling, the paper completed the 126KVGIS intelligent terminal information model based on the analysis of its information characteristics, and established the hardware platform with data model and logical nodes provided by IEC61850. Thus it has a certain practical significance to promote the standard construction, operation and management of intelligent substation, and lead the digital process of process layer devices.

关键词： Object oriented modeling Switching circuits Circuit breakers Data models Unified modeling language Analytical models

来源：评论

学校读者我要写书评

暂无评论

Design of the PID temperature controller for an alkaline electrolysis system with time delays

arXiv

引用

arXiv 2022年

作者： Qi, Ruomei Li, Jiarong Lin, Jin Song, Yonghua Wang, Jiepeng Cui, Qiangqiang Qiu, Yiwei Tang, Ming Wang, Jian State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China Tsinghua-Sichuan Energy Internet Research Institute Chengdu China Department of Electrical and Computer Engineering University of Macau China School of Materials Science and Engineering Shanghai University Shanghai China Purification Equipment Research Institute of CSIC Handan China College of Electrical Engineering Sichuan University Chengdu China

Electrolysis systems use proportional-integral-derivative (PID) temperature controllers to maintain stack temperatures around set points. However, heat transfer delays in electrolysis systems cause manual tuning of PID temperature controllers to be time-consuming, and temperature oscillations often occur. This paper focuses on the design of the PID temperature controller for an alkaline electrolysis system to achieve fast and stable temperature control. A thermal dynamic model of an electrolysis system is established in the frequency-domain for controller designs. Based on this model, the temperature stability is analysed by the root distribution, and the PID parameters are optimized considering both the temperature overshoot and the settling time. The performance of the optimal PID controllers is verified through experiments. Furthermore, the simulation results show that the before-stack temperature should be used as the feedback variable for small lab-scale systems to suppress stack temperature fluctuations, and the after-stack temperature should be used for larger systems to improve the economy. This study is helpful in ensuring the temperature stability and control of electrolysis systems. Copyright © 2022, The Authors. All rights reserved.

关键词： Three term control systems

来源：评论

学校读者我要写书评

暂无评论

Demand analysis of the information sharing among multi-bays through the process networks in intelligent distribution substation

Demand analysis of the information sharing among multi-bays ...

引用

International Conference on Advanced power system Automation and Protection (APAP)

作者： YueLin Yang Bin Wang BoYing Wen XinZhou Dong TingTing Wu Kun Liu College Of Information and Electrical Engineering CHINA Agricultural University Beijing 100083 China State Key Lab of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Beijing 100084 China School of Electrical Engineering & Renewable Energy China Three Gorges University Yichang 443000 China

Multi-bay information sharing has very important significances for the the enhancing of the relay characteristics and improving of the system control methods. With the summary of distribution substation busbar protection, small current grounding fault line selection, non-communication double-circuit line protection, reactive power and voltage control, low frequency load shedding control programmes, It analyse the needs of the information sharing among multiple bays and the application of integrated protection.

关键词： Circuit faults Substations Process control control systems Reliability Automation

来源：评论

学校读者我要写书评

暂无评论

Thermal Modelling and controller Design of an Alkaline Electrolysis system under Dynamic Operating Conditions

arXiv

引用

arXiv 2022年

Thermal management is vital for the efficient and safe operation of alkaline electrolysis systems. Traditional alkaline electrolysis systems use simple proportional-integral-differentiation (PID) controllers to maintain the stack temperature near the rated value. However, in renewable-to-hydrogen scenarios, the stack temperature is disturbed by load fluctuations, and the temperature overshoot phenomenon occurs which can exceed the upper limit and harm the stack. This paper focuses on the thermal modelling and controller design of an alkaline electrolysis system under dynamic operating conditions. A control-oriented thermal model is established in the form of a third-order time-delay process, which is used for simulation and controller design. Based on this model, we propose two novel controllers to reduce temperature overshoot: one is a current feed-forward PID controller (PID-I), the other is a model predictive controller (MPC). Their performances are tested on a lab-scale system and the experimental results are satisfying: the temperature overshoot is reduced by 2.2◦C with the PID-I controller, and no obvious overshoot is observed with the MPC controller. Furthermore, the thermal dynamic performance of an MW-scale alkaline electrolysis system is analyzed by simulation, which shows that the temperature overshoot phenomenon is more general in large systems. The proposed method allows for higher temperature set points which can improve system efficiency by 1%. © 2022, CC BY.

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

Evaluating Comprehensive Development Quality of a Regional power Grid by Using an Integrated Multi-criteria Decision-Making Methodology

引用

IOP Conference Series: Materials Science and Engineering 2019年第4期612卷

作者： Xiaodong Zhang Kaiming Qin Ruihua Si Xianjun Ge State Grid Henan Electric Power Company Zhengzhou 450018 China State Key Laboratory of Power System and Power Generation Equipment Control and Simulation Department of Electrical Engineering Tsinghua University Haidian Beijing 100084 China

Due to the economic situation changes and the continuous expansion of new energy power in China, a new evaluation methodology based on multi-criteria decision making (MCDM) should be proposed to promote the comprehensive development of the new regional power grid. Some criteria were selected to constitute an indicator system from the perspectives of the safety reliability, network structure and economic benefit. Then, an integrated evaluation model was proposed based on fuzzy AHP method and VIKOR method was applied to calculate a series of comprehensive evaluation indexes. A regional power grid was chosen as an empirical analysis to demonstrate the feasibility of the evaluation system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Vibration and acoustic noise emitted by dry-type air-core reactors under PWM voltage excitation

引用

AIP Advances 2018年第5期8卷

作者： Jingsong Li Shanming Wang Jianfeng Hong Zhanlu Yang Shengqian Jiang Shichong Xia State Key Laboratory of Control and Simulation of Power System and Generation Equipments Department of Electrical Engineering Tsinghua University Beijing 100084 China

According to coupling way between the magnetic field and the structural order, structure mode is discussed by engaging finite element (FE) method and both natural frequency and modal shape for a dry-type air-core reactor (DAR) are obtained in this paper. On the basis of harmonic response analysis, electromagnetic force under PWM (Pulse Width Modulation) voltage excitation is mapped with the structure mesh, the vibration spectrum is gained and the consequences represents that the whole structure vibration predominates in the radial direction, with less axial vibration. Referring to the test standard of reactor noise, the rules of emitted noise of the DAR are measured and analyzed at chosen switching frequency matches the sample resonant frequency and the methods of active vibration and noise reduction are put forward. Finally, the low acoustic noise emission of a prototype DAR is verified by *** the request of the authors, this article is being retracted effective 30 October 2018.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Improved simultaneous extrapolation in sharp impulse signals in time and frequency domains

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第18期26卷 133-137页

作者： Zou, Jun Guo, Jian He, Jin-Liang Zhang, Bo Teng, Wen-Rui State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing 100084 China Dept. of Electrical Engineering Henan University of Technology Zhengzhou 450042 China

The characteristic of the transient response of the grounding system takes on a fast rising and slow damping with the lightning excitation. An improved simultaneous time and frequency domain extrapolation method is presented based on Hermite function expansion, which takes the above mentioned characteristic of the transient signal into account, using early time response and low-frequency data, the complete electromagnetic response is generated. By using mutually complementary data, simultaneous extrapolation in time and frequency domains are carried out by using the Hermite polynomials as the basis function. However, the extrapolation method is not suitable to deal with the transient response with the fast pulse excitation. The improvement for the extrapolation method is to pre- and post-process the transient response data with the fast pulse excitation. As a pre-processed procedure, in order to reduce the condition number of the matrix used for determined the coefficient of basis function, the scale transformation is used in time and frequency domain respectively, and the data in time domain is smoothed and padded with zero. An adaptive algorithm to determine the order of Hermite function is also proposed. As a post-processed step, the transient data are smoothed by using GPOF to obtain a convergent result. The numerical example and the field measurement are presented to illustrate the application of this methodology. The method proposed enhances the ability of the simultaneous time and frequency extrapolation techniques.

关键词： Signal processing

来源：评论

学校读者我要写书评

暂无评论

Adaptive Galerkin approach of the indirect boundary element method for calculating 3D linear magnetostatic field

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第1期26卷 96-100页

作者： Zou, Jun He, Jin-Liang Yu, Hai-Yu Teng, Wen-Rui State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing 100084 China Dept. of Electrical Engineering Henan University of Technology Zhengzhou 450042 China

The indirect boundary element method has some special advantages for the 3D linear magnetostatic field calculation by using the equivalent magnetic surface charge. In order to improve the accuracy of solutions and decrease the computational costs, an adaptive Galerkin approach to solve the magnetostatic integral equation is presented by using the h-type refinement technology. The basic idea of the proposed approach can be summarized as follows. The error of magnetic flux density is globally minimized in the Galerkin sense in the implementation, so the continuity error of magnetic flux density of each element can be served as a criterion to guide the adaptive refinement. The singularity of geometric corners and edges can be overcome due to the scheme of the discretization of the integral equation with Galerkin's approach. In addition, a local resolution technology is proposed, which leads to the minimal refined unknown. The numerical examples show the proposed method is efficient and accurate by comparison to the analytical solutions and the measured results.

关键词： Magnetic fields

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to “Hierarchical evaluation framework for coupling effect enhancement of renewable energy and thermal power coupling generation system” [Int. J. Electr. power Energy Syst. 146 (2023) 108717]

引用

International Journal of Electrical power & Energy systems 2024年 158卷

作者： Yao Zou Qianggang Wang Bo Hu Yuan Chi Guiping Zhou Fei Xu Niancheng Zhou Qinqin Xia State Key Laboratory of Power Transmission Equipment Technology School of Electrical Engineering Chongqing University China State Grid Liaoning Electric Power Company Limited Shenyang Liaoning China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Beijing China

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：