检索结果-内蒙古大学图书馆

Flexible region aggregation of adjustable loads via an adaptive convex hull strategy

Global Energy Interconnection 2025年第1期8卷 106-120页

作者： Yisha Lin Zongxiang Lu Ying Qiao Ruijie Chen State Key Lab of Power Systems Operation and Control (Department of Electrical Engineering Tsinghua University)BeijingPR China State Grid Quanzhou Electric Power Supply Company QuanzhouPR China

Increasing interest has been directed toward the potential of heterogeneous flexible loads to mitigate the challenges associated with the increasing variability and uncertainty of renewable *** the aggregated flexible region of load clusters managed by load aggregators is the crucial basis of power system scheduling for the system *** is because the aggregation result affects the qual-ity of the scheduling schemes.A stringent computation based on the Minkowski sum is NP-hard,whereas existing approximation meth-ods that use a special type of polytope exhibit limited adaptability when aggregating heterogeneous *** study proposes a stringent internal approximation method based on the convex hull of multiple layers of maximum volume boxes and embeds it into a day-ahead scheduling optimization *** numerical results indicate that the aggregation accuracy can be improved compared with methods based on one type of special polytope,including boxes,zonotopes,and ***,the reliability and economy of the power sys-tem scheduling can be enhanced.

关键词： Aggregation Flexible region Heterogeneous load power system scheduling

来源：评论

学校读者我要写书评

暂无评论

Study on the Characteristics of Natural Grounding Resistance of Underground Tunnels 11th

Study on the Characteristics of Natural Grounding Resistance...

引用

11th Frontier Academic Forum of Electrical Engineering, FAFEE 2024

作者： Ma, Pengyu Li, Benliang Zou, Jun State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China State Power Economic Research Institute Beijing102200 China

ISBN: (纸本)9789819787791

With the development of cities, underground tunnels are more and more widely used, and the reinforced concrete in their walls can be used as the natural grounding body of the tunnels. However, underground tunnels have curved structures, multiple cross-sections and deep-buried structures, and the electrical conductivity of the concrete is different from that of the soil, etc., and the traditional analytical method has limitations in calculating the grounding resistance of the tunnels in these cases. In order to satisfy the needs of practical engineering, this paper adopts a numerical method based on the MoM numerical method to analyze the grounding system of underground tunnels with complex geometries and to calculate the grounding resistance of reinforced concrete systems in underground tunnels. In order to assess the difference between the analytical solution and the exact solution, the article introduces a correction factor to measure the ratio between the two. simulations are carried out for real cases, and the results show that the accuracy of the analytical solution can be improved by introducing the correction factor. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： correction factor grounding resistance numerical method Underground tunnels

来源：评论

学校读者我要写书评

暂无评论

Superhydrophobic ceramic membrane coupled with a biphasic solvent for efficient CO_(2)capture

引用

Green Energy & Environment 2025年第4期10卷 834-844页

作者： Kaili Xue Zhen Chen Xiaona Wu Heng Zhang Haiping Chen Junhua Li State Key Joint Laboratory of Environment Simulation and Pollution Control School of EnvironmentTsinghua UniversityBeijing100084China Beijing Key Laboratory of Pollutant Monitoring and Control in Thermoelectric Production Process School of EnergyPower and Mechanical EngineeringNorth China Electric Power UniversityBeijing102206China MOE Key Laboratory of Resources and Environmental Systems Optimization College of Environmental Science and EngineeringNorth China Electric Power UniversityBeijing102206China

An innovative strategy was proposed by integration of membrane contactor(MC)with biphasic solvent for efficient CO_(2) capture from flue *** accessible fly ash-based ceramic membrane(CM)underwent hydrophobic modification through silane grafting,followed by fluoroalkylsilane decoration,to prepare the superhydrophobic membrane(CSCM).The CSCM significantly improved resistance to wetting by the biphasic solvent,consisting of amine(DETA)and sulfolane(TMS).Morphological characterizations and chemical analysis revealed the notable enhancements in pore structure and hydrophobic chemical groups for the modified *** of wetting/bubbling behavior based on static wetting theory referred the liquid entry pressure(LEP)of CSCM increased by 20 kPa compared to pristine *** with traditional amine solvents,the biphasic solvent presented the expected phase *** experiments demonstrated that the CO_(2) capture efficiency of the biphasic solvent increased by 7%,and the electrical energy required for desorption decreased by 32%.The 60-h continuous testing and supplemental characterization of used membrane confirmed the excellent adaptability and durability of the *** study provides a potential approach for accessing hydrophobic ceramic membranes and biphasic solvents for industrial CO_(2) capture.

关键词： Carbon capture Membrane contactor Hydrophobic modification Membrane wetting Biphasic solvent

来源：评论

学校读者我要写书评

暂无评论

control, Modeling and Stability Analysis of DRU-based Grid-forming Converter

引用

Chinese Journal of Electrical Engineering 2025年第1期11卷 83-92页

作者： Wencong Wu Minzhi Wang Liang Tu Haiqing Cai Guanglei Yan Xiaohui Qu Haohan Gu Wei Chen State Key Laboratory of HVDC China Southern Power GridGuangzhou 510663China National Energy Power Grid Technology R&D Center Guangzhou 510663China Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power Systems China Southern Power GridGuangzhou 510663China CSG Key Laboratory for Power System Simulation China Southern Power GridGuangzhou 510663China School of Electrical Engineering Southeast UniversityNanjing 210096China

Diode rectifier unit(DRU)-based high-voltage direct current(HVDC)transmissionsystems areeffectivein achieving the stableandeconomical operation of offshore *** theuncontrollable characteristicsof DRUs,a grid-forming(GFM)strategy forwind-turbine converters isnecessary to support offshore AC voltageand ***,the active power-synchronization control in traditional GFM converters is unsuitable for DRU-based GFM ***,the stability issue for DRU-based HVDC systems involving DRU-based GFM and grid-following(GFL)converters has not yet been *** solve these issues,this study begins with the characteristics of a DRU-based HVDC system and presents a control scheme for DRU-based GFM converters for power ***,the dq-frame impedance model of the DRU-based GFM converteris proposed for the stability analysis of the entire HVDC ***,a simulation platform is built to verify the model accuracy and system stability.

关键词： Diode rectifier unit offshore wind-powergeneration grid-forming converter impedance model stabilityanalysis

来源：评论

学校读者我要写书评

暂无评论

Achieving an Accurate Random Process Model for PV power Using Cheap Data:Leveraging the SDE and Public Weather Reports

引用

CSEE Journal of power and Energy systems 2025年第1期11卷 124-135页

作者： Yiwei Qiu Jin Lin Zhipeng Zhou Ningyi Dai Feng Liu Yonghua Song College of Electrical Engineering Sichuan UniversityChengdu610065China State Key Laboratory of the Control and Simulation of Power Systems and Generation Equipment Tsinghua UniversityBeijing 100087China State Key Laboratory of Internet of Things for Smart City University of MacaoMacao999078China Department of Electrical Engineering Tsinghua UniversityBeijing100087China

Stochastic differential equation (SDE)-based random process models of renewable energy sources (RESs) jointly capture evolving probability distribution and temporal correlation in continuous time. It enabled recent studies to remarkably improve performance of power system dynamic uncertainty quantification and optimization. However, considering the non-homogeneous random process nature of PV, there still remains a challenging question: how can a realistic and accurate daily SDE model for PV power be obtained that reflects its weather-dependent and non-Gaussian uncertainty in operation, especially when high-resolution numerical weather prediction (NWP) or sky imager is unavailable for many distributed plants? To fill this gap, this article finds that an accurate SDE model for PV power can be constructed only using the data from low-resolution public weather reports. Specifically, for each day, an hourly parameterized Jacobi diffusion process recreates temporal patterns of PV volatility. Its parameters are mapped from the day's public weather reports to reflect varying weather conditions using a simple learning model. The SDE model jointly captures intraday and intrahour volatility. Statistical examination shows that the proposed approach outperforms a selection of the latest deep learning-based time series models on real-world data collected in Macao.

关键词： Photovoltaic(PV)power random process stochastic differential equation(SDE) stochastic optimization time series modeling uncertainty quantification weather report

来源：评论

学校读者我要写书评

暂无评论

Suppression of Phase Current Ripple and Torque Harmonics in Four-Module PMSM with Asymmetric Mutual Inductance

引用

IEEE Transactions on power Electronics 2025年

作者： Liu, Kaiyuan Li, Chi Zheng, Zedong Li, Yongdong Tsinghua University State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Department of Electrical Engineering Beijing100084 China

In N-module motors, uniform carrier phase shifting (UCPS) by 2π/N between modules can effectively suppress torque harmonics caused by high-frequency switching of power devices. In multi-module motors with fractional-slot concentrated winding, the mutual inductance between adjacent windings is higher than that between non-adjacent windings. Although the conventional UCPS can reduce the torque sideband harmonics synthesized by the four modules, this asymmetric mutual inductance (AMI) paradoxically increases phase current ripple in each sub-module, leading to higher system losses. Aiming at this problem, this paper derives the mathematical model of N-module motor with AMI, analyzes the limitations of the traditional UCPS method that increases the phase current ripple. For different optimization objectives, two carrier phaseshifting angle optimized strategies are proposed to achieve integrated suppression of torque sideband harmonics and intramodule phase current ripples, with a genetic algorithm improving optimization speed. A threshold coefficient is introduced to achieve a tradeoff between phase current ripple and q-axis current harmonics, which can be adjusted to prioritize objectives based on user requirements. To enhance algorithm adaptability, the paper further investigates model variations under uneven torque distribution in sub-healthy states and proposes an improved comprehensive optimization algorithm, limiting torque sideband harmonics and current ripple in both healthy and sub-healthy conditions. Finally, the proposed algorithm is validated experimentally by a four-module permanent magnet synchronous motor. © 2025 IEEE.

关键词： Genetic algorithms

来源：评论

学校读者我要写书评

暂无评论

A framework of day-ahead wind supply power forecasting by risk scenario perception

引用

IEEE Transactions on Sustainable Energy 2025年

作者： Yang, Mao Huang, Yutong Wang, Zhao Wang, Bo Su, Xin Northeast Electric Power University Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Jilin132012 China China Electric Power Research Institute State Key Laboratory of Operation and Contr Ol of Renewable Energy & Storage Systems Beijing100912 China

Wind power forecasting (WPF) systems are essential to maintain the safe and stable operation of the power system in case of large-scale grid-connected wind farms. However, the current forecasting has the problem of disunity between statistical value and application value, that is, it only pays attention to its forecasting accuracy and ignores the risks caused by it in the power system. In order to solve the above problems, this study proposes a framework of wind supply power forecasting (WSPF) for wind farm cluster, which takes into account the risk scenario perception. First of all, aiming at the predicted risk phenomenon in WPF, TimesNet combined with the fluctuation information of Numerical Weather Prediction (NWP) wind speed is used to identify the corresponding risk scenarios. Secondly, the effective consumption area and power supply risk area evaluation index, as well as the accuracy of WSPF are defined, and the optimal forecasting curve correction scheme is fitted according to the index. Thirdly, taking into account the correction scheme and identification results, a variety of predictors are used to verify the WSPF according to the above framework. Finally, the proposed method is applied to a wind farm cluster in Inner Mongolia Autonomous region of China, the average accuracy of WSPF has increased by 37%, which verifies the effectiveness and universality of this method. © 2010-2012 IEEE.

关键词： Wind forecasting

来源：评论

学校读者我要写书评

暂无评论

Extraction and application of intrinsic predictable component in day-ahead power prediction for wind farm cluster

引用

Energy 2025年 328卷

作者： Yang, Mao Jiang, Renxian Yu, Xinnan Wang, Bo Su, Xin Ma, Chenglian The Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin132012 China State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems China Electric Power Research Institute Beijing100912 China

With the continuous updating and iteration of artificial intelligence algorithms, prediction models emerge one after another, but the research and utilization of the predictability of wind power is still less. Therefore, this paper proposed a day-ahead power prediction method for Wind Farm Cluster (WFC) based on intrinsic predictable component extraction. Firstly, based on the difference of power distribution between wind farm and WFC, a method of Wind power Curve (WPC) modeling for WFC is proposed, which provides the basis for establishing the Final Set of Wind power Curve (FSWPC). Secondly, the Intrinsic Predictable Component (IPC) of wind power is extracted based on the FSWPC, and the Interference Component (IC) of wind power is separated to eliminate the influence of IC on IPC in the process of prediction. Thirdly, the historical similarity matching method with large threshold is used to predict the IC to make up for the numerical deficiency of the IPC. Finally, the proposed method was applied to a WFC in China to verify its effectiveness. Compared with the traditional prediction strategy, the NRMSE, NMAE and MAPE are reduced by 1.59 %, 1.15 % and 6.42 %, respectively. © 2025 Elsevier Ltd

关键词： Iterative methods

来源：评论

学校读者我要写书评

暂无评论

FDCA-DSTGCN: A Wind Farm Cluster power Day-ahead Prediction Model Based on Frequency Domain Information Gain and Dynamic Trend Sensing

引用

IEEE Transactions on Sustainable Energy 2025年

作者： Yang, Mao Niu, Jiajun Wang, Bo Huang, Dawei Su, Xin Ma, Chenglian Ministry of Education Northeast Electric Power University Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Jilin132012 China China Electric Power Research Institute State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems Beijing100912 China

Accurate wind farm cluster power prediction (WFCPP) is of vital significance for new power systems with large-scale wind power integration. The current WFCPP modeling method ignores the important role of wind direction and frequency domain information, resulting in insufficient use of spatial information and difficult to improve the prediction accuracy. In order to solve the above problems, a day-ahead power prediction model for wind farm cluster power is proposed based on information gain in frequency domain and dynamic trend sensing. Firstly, a cluster division method based on graph theory and progressive fusion of multiple information is proposed, and a virtual information node is set up. Secondly, a method to identify prevailing wind direction under time window is proposed for subsets, and a dynamic weighted directed graph structure is designed based on prevailing wind direction and wind speed. Thirdly, a dynamic spatio-temporal graph convolutional network model with frequency domain gain channel attention mechanism (FDCA-DSTGCN) is proposed to integrate the above information and complete the prediction. Finally, the proposed method is applied to a wind farm cluster in Inner Mongolia of China. Compared with the existing and traditional prediction methods, the normalized root mean square error of the proposed method is reduced by 1.13% -2.15%, which verifies the effectiveness of the proposed method. © 2010-2012 IEEE.

关键词： Mean square error

来源：评论

学校读者我要写书评

暂无评论

Performance-Aware control of Modular Batteries For Fast Frequency Response

引用

IEEE Transactions on Sustainable Energy 2025年

作者： He, Yutong Ruan, Guangchun Zhong, Haiwang Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering Beijing100084 China Massachusetts Institute of Technology Lab for Information and Decision Systems CambridgeMA02139 United States

Modular batteries can be aggregated to deliver frequency regulation services for power grids. Although utilizing the idle capacity of battery modules is financially attractive, it remains challenging to consider the heterogeneous module-level characteristics such as dynamic operational efficiencies and battery degradation. In addition, real-time decision making within seconds is required to enable fast frequency response. In order to address these issues, this paper proposes a performance-aware scheduling approach for battery modules to deliver fast frequency response (FFR) support. In particular, the conduction loss and switching loss of battery packs as well as converters are captured within a mix-integer quadratic constrained program (MIQCP). The cycle-based aging model identifies the aging cost of battery modules during frequent cycling by introducing the aging subgradient calculation and linearization. Case studies based on real-world battery data show that the proposed scheduling approach can effectively reduce power loss cost by nearly 28%-57% and battery aging cost by 4%-15% compared to conventional methods, which can also enhance the SoC balance. © 2010-2012 IEEE.

关键词： Battery management systems

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：