检索结果-内蒙古大学图书馆

13th International Conference on Development in power System Protection 2016, DPSP 2016

作者： Ni, Jiang Wang, Bin Dong, Xinzhou State Key Lab of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing100084 China

ISBN: (纸本)9781785618260

High impedance faults (HIFs) are easy to occur in collective feeders in wind farms and may cause the cascading of wind generators tripping. This kind of faults is difficult to be detected by traditional relay or fuse due to the limited fault current values and the situation is worse in wind farms. The mostly adopted HIF detection algorithms are based on the 3rd harmonic characteristic of the fault zero-sequence currents, whereas these 3rd harmonics are very easy to be polluted by wind power back-to-back converters. To solve this problem, the typical HIF arc flash based on Mayr's arc model is first built, and the typical fault waveforms of HIF in wind farm are presented. Then the characteristics of high impedance faults are analysed to distinguish the occurrence of HIF from other harmonic interference. After that, the performance of the traditional harmonic based HIF detection algorithm is discussed, and a novel detection algorithm is presented to prevent harmonic interference influence in wind farms.

关键词： Electric utilities

来源：评论

学校读者我要写书评

暂无评论

Common-mode voltage reduction for three-phase-to-four-leg direct matrix converter with a novel control strategy

Common-mode voltage reduction for three-phase-to-four-leg di...

引用

2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific 2017

作者： Huang, Songtao Guo, Yougui Xu, Lie Li, Yongdong School of Information and Engineering Xiangtan University Xiangtan China State Key Lab of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing China

ISBN: (纸本)9781538628942

Due to the three-phase-to-three-leg direct matrix converter (3 × 3 MC) cannot be achieved with unbalanced load, then the three-phase-to-four-leg direct matrix converter (3 × 4 MC) is introduced. A novel modulation strategy is proposed to ensure the capability of 3 × 4 MC with arbitrary loads, which is development by using fixed voltage vectors and one zero vector. Considering the harm of common-mode voltage (CMV), the switch configurations of the proposed modulation strategy are improved. Selecting the reasonable zero vectors by the subsection partition, which is capable of reducing the CMV to half of the input source voltage produced by the zero vectors, and the ability of 3 × 4 MC with arbitrary load is also realized. The feasibility of the proposed strategy is verified by the accompanying simulation results. © 2017 IEEE.

关键词： Matrix converters

来源：评论

学校读者我要写书评

暂无评论

Situation Awareness of Active Distribution Network:Roadmap,Technologies,and Bottlenecks

引用

CSEE Journal of power and Energy systems 2016年第3期2卷 35-42页

作者： Jin Lin Can Wan Yonghua Song Renle Huang Xiaoshuang Chen Wanfang Guo Yi Zong You Shi State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijing 100084China State Grid Beijing Electric Power Company Beijing 102200China Center for Electric Power and Energy Technical University of DenmarkElektrovej 325DK 2800Denmark

With the rapid development of local generation and demand response,the active distribution network(ADN),which aggregates and manages miscellaneous distributed resources,has moved from theory to *** and optimal operations now require an advanced situation awareness(SA)system so that operators are aware of operation states and potential *** solutions in distribution supervisory control and data acquisition(DSCADA)as well as the distribution automation system(DAS)generally are not able to meet the technology requirements of *** this paper,the authors’participation in the project of developing an SA system as the basic component of a practical active distribution management system(ADMS)deployed in Beijing,China,is *** paper reviews the ADN’s development roadmap by illustrating the changes that are made in elements,topology,structure,and control *** into consideration these hardware changes,a systematic framework is proposed for the main components and the functional hierarchy of an SA system for the *** SA system’s implementation bottlenecks are also presented,including,but not limited to issues in big data platform,distribution forecasting,and security *** technology solutions are also provided.

关键词： Active distribution network distribution automation system roadmap situation awareness technology bottleneck

来源：评论

学校读者我要写书评

暂无评论

Optimization of Heterogeneous Resources Combination using Virtual power Plant based on Modern Portfolio Theory

Optimization of Heterogeneous Resources Combination using Vi...

引用

2020 IEEE Sustainable power and Energy Conference, iSPEC 2020

作者： Yun, Qiuchen Tian, Liting Zhang, Fang Cheng, Lin School of Electrical Engineering Beijing Jiaotong University Beijing China Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing China

ISBN: (纸本)9781728191645

In recent years, with the development of smart grid technologies, wind turbines, photovoltaics and other renewable energy sources as well as demand-side loads have participated in grid dispatching, resulting in increased complexity of energy flows in the grid. Distributed energy resources (DERs) differ in many dimensions, such as technical attributes, operating modes, and business objectives, and its management authority also belongs to different entities, making it more difficult for grids to manage DERs. A management mode, virtual power plant (VPP), being enabled by information and communication technology, could effectively overcome the challenges with decentralized DERs and help realize the aggregation of DERs. In this paper, the interaction between customers and VPP is modeled, where VPP divides the owners of DERs into three categories according to the willingness and responsiveness of customers and balances budget costs and risks based on the modern portfolio theory. simulation with the CIGRE 20kV distribution network benchmark demonstrates that VPP could greatly meet the power consumption demand of multiple participants during operation. This paper also provides a basis for the selection of DERs aggregated by VPP.11This paper is sponsored by the National key Research and Development Program (No.2017YFB0903300) and National Natural Science Foundation of China (No.51807107) 22This paper is sponsored by the Young Talents Support Project of the Chinese Society for Electrical Engineering (CSEE) titled 'Research on key technologies for optimal operation and control of transportation energy systems'. © 2020 IEEE.

关键词： Virtual power Plants

来源：评论

学校读者我要写书评

暂无评论

An Internet of Energy Things Based on Wireless LPWAN

引用

Engineering 2017年第4期3卷 460-466页

作者： Yonghua Song Jin Lin Ming Tang Shufeng Dong State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University. Beijing 100084 China College of Electrical Engineering Zhejiang University Hangzhou 310027 China Center of Internet of Energy Things Tsinghua-Sichuan Energy Internet Institution Chengdu 610213 China

Under intense environmental pressure, the global energy sector is promoting the integration of renewable energy into interconnected energy systems. The demand-side management （DSM） of energy systems has drawn considerable industrial and academic attention in attempts to form new flexibilities to respond to variations in renewable energy inputs to the system. However, many DSM concepts are still in the experimental demonstration phase. One of the obstacles to DSM usage is that the current information infrastructure was mainly designed for centralized systems, and does not meet DSM requirements. To overcome this barrier, this paper proposes a novel information infrastructure named the lnternet of Energy Things （IoET） in order to make DSM practicable by basing it on the latest wireless communication technology： the low-power wide-area network （LPWAN）. The primary advantage of LPWAN over general packet radio service （GPRS） and area Internet of Things （loT） is its wide-area coverage, which comes with minimum power consumption and maintenance costs. Against this background, this paper briefly reviews the representative LPWAN tech- nologies of narrow-band Internet of Things （NB-IoT） and Long Range （LORa） technology, and compares them with GPRS and area IoT technology. Next, a wireless-to-cloud architecture is proposed for the IoET, based on the main technical features of LPWAN. Finally, this paper looks forward to the potential of IoET in various DSM application scenarios.

关键词： Low-power wide-area network Internet of Things Narrow-band lnternet of Things LoRa technology Demand-side management

来源：评论

学校读者我要写书评

暂无评论

Capacity Configuration of Hybrid CSP/PV Plant for Economical Application of Solar Energy

引用

Chinese Journal of Electrical Engineering 2020年第2期6卷 19-29页

作者： Fei Li Canbing Li Kai Sun Jiamei Zhang Hua Li State Grid Henan Electric Power Company Economic Research Institute Zhengzhou 450000China College of Electrical and Information Engineering Hunan UniversityChangsha 410082China Department of Electrical Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Lab of Control and Simulation of Power Systems and Generation Equipment Tsinghua UniversityBeijing 100084China Zhangjiakou Power Supply Company Zhangjiakou 075000China

Concentrating solar power(CSP)technology has received increasing attention in recent years because of its distinct advantage for dispatchable power generation from solar ***,owing to its highly levelized costs of electricity,CSP plants are less competitive than photovoltaic(PV)power *** overcome this drawback and suppress PV power fluctuations,the concept of a hybrid CSP/PV power plant is proposed and developed.A capacity configuration method based on filtering and checking is proposed to seek a relationship between the capacity configuration of a hybrid CSP/PV system and the cost of solar ***-content hybrid systems with different ratios of CSP capacity and PV capacity are modeled,and their comprehensive performance is *** and comparisons with a standalone CSP system focused on annual energy generation,capacity factor,levelized cost of electricity,and possibility for loss of power supply show that the hybrid CSP/PV systems possess different features depending on their capacity *** results indicate that the proposed method can supply a convenient and simple operation pattern that favors engineering utilization and extension.

关键词： Concentrating solar power photovoltaic capacity configuration levelized cost of electricity

来源：评论

学校读者我要写书评

暂无评论

Fault location method for high-voltage direct current transmission line using incident current travelling waves

Fault location method for high-voltage direct current transm...

引用

作者： Wang, Bin Yang, Lin Dong, Xinzhou Department of Electrical Engineering State Key Lab of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing10084 China

The reflection coefficient of the travelling wave is different with different frequencies because of the inductance and capacitive elements on the boundary of the DC transmission line, which leads to the oscillation of the travelling wave. It is difficult to obtain the wave head's arrival time accurately using travelling wave method to locate fault because of the oscillation. The current travelling wave is the superposition of the incident current travelling wave and the reflected current travelling wave. There is no oscillation in the incident wave. Therefore, a method using incident current wave for fault location is proposed here. The initial current travelling wave and the transmission line boundary function are used to calculate the incident current travelling wave, and the incident wave is used to locate fault. The Prony decomposition algorithm is used to identify boundary function using the initial current travelling wave generated in specific fault condition. PSCAD simulation shows that the influence of oscillations of travelling wave can be eliminated by using incident current wave to locate faults, and the accuracy of fault location is improved. © Institution of Engineering and Technology. All rights reserved.

关键词： Electric lines

来源：评论

学校读者我要写书评

暂无评论

Medium and long-term wind energy forecasting method considering multi-scale periodic pattern 10

Medium and long-term wind energy forecasting method consider...

引用

2020 10th International Conference on power, Energy and Electrical Engineering, CPEEE 2020

作者： Lin, Yisha Lu, Zongxiang Qiao, Ying Li, Mingjie Liang, Zhifeng State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Haidian District Beijing100084 China State Grid Corporation of China Haidian District Beijing100031 China

Medium and long-term weather sequence forecast becomes unreliable beyond two weeks since the weather is a chaotic system. Using values of same months for electricity prediction of wind power is the usual method. This approach defaults wind power output with annual cycle law. However, the periodic pattern can be very complicated in fact with multiple time scales. This paper proposes an approach with multi-scale periodic pattern considered. The application of parametric estimation on cumulative distribution function avoids the difficulty of predicting the power curve. Meteorological condition is considered to some extent via multi-scale periodic pattern explored basing on historical energy data. This work is an exploration for medium and long-term wind power forecasting that can well adapt to existing conditions. It has better prediction accuracy than the method without multi-scale periodicity considered. © 2020 The Authors, published by EDP Sciences.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

Applicable range analysis of optimized single-terminal fault location algorithm

Applicable range analysis of optimized single-terminal fault...

引用

2011 International Conference on Advanced power System Automation and Protection, APAP 2011

作者： Huang, Tian-Xiao Dong, Xin-Zhou Shi, Shen-Xing Wang, Bin State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

ISBN: (纸本)9781424496198

Impedance method and single terminal travelling wave method are analyzed in paper, applicable scope of optimized solution is presented. Impedance method is of high robustness but low accuracy. Single terminal travelling wave method offers high accuracy but poor robustness. Optimized solution combines these two methods together, takes advantages of both methods. It is a great enhancement to single terminal fault location. This paper analyzed theoretical basis of optimized solution, proposed the calculation algorithm of fault location range using impedance method. Analyses of impedance method and single terminal travelling wave method show that the optimized solution is suitable for engineering application. Error analysis is proved correct by simulation. © 2011 IEEE.

关键词： Location

来源：评论

学校读者我要写书评

暂无评论

Single phase grounding fault location based on frequency domain characteristics of fault current

Single phase grounding fault location based on frequency dom...

引用

2011 International Conference on Advanced power System Automation and Protection, APAP 2011

作者： Jiang, Bo Shi, Shenxing Dong, Xinzhou Wang, Bin State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

ISBN: (纸本)9781424496198

This paper studies the fault current frequency spectrum characteristics of single phase ground fault in ungrounded distribution networks, and the fault location method based on it. Firstly, it analyzes the production mechanism of 2nd major frequency component, and the relationship between the 2nd major frequency component and series resonance frequency of the faulted line. Secondly, from the perspectives of lumped-parameter circuit, the relationship between 2nd major frequency component and fault location is deduced. simulation cases are used to confirm the relationship. Last, the impact of load and initial fault phase angle on the 2nd major frequency component are researched. simulation research proves the feasibility of the fault detection and location method based on frequency domain characteristics. © 2011 IEEE.

关键词： Electric fault location

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：