检索结果-内蒙古大学图书馆

The evaporation of nanoscale sodium liquid film on the non-ideal nanostructure surface: A molecular dynamics study

International Journal of Advanced Nuclear Reactor Design and Technology 2023年第1期5卷 1-8页

作者： Wang, Zetao Ye, Tianzhou Guo, Kailun Tian, Wenxi Qiu, Suizheng Su, Guanghui State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

The nanoscale liquid sodium film inside the microporous wick structure is of great importance to understanding the evaporation mechanism of the sodium heat pipe. The novel optimized wick structure is made of several layers of special screen. The surface of each screen exhibits a nanostructure type. Some non-ideal nanostructures may result from experimental faults or limits. And they will have an effect on the evaporation of film. In the present study, molecular dynamics is adopted to investigate this effect. The simulation system consists of the liquid sodium film and the solid surface. The flat surface is set as the reference. Based on the three non-ideal shapes of deposition, the sinusoidal nanostructures, conical nanostructures, and spherical nanostructures are built. The results indicate that the evaporation is suppressed by the above nanostructure surfaces. The weakening effect is through three forms: the potential gradient of the liquid film is intensified and the evaporation difficulty is increased;the heat transfer in the solid-liquid contact region is impeded;the collision heat transfer inside the liquid film is affected due to the delay of the aggregation variation between liquid atoms. © 2023 Xi'an Jiaotong University

关键词： Heat pipes

来源：评论

学校读者我要写书评

暂无评论

Improved photocatalytic H2 evolution from inorganic/organic sacrificial solution over Ni-doped (CuIn)0.2Zn1.6S 2 photocatalysts

Improved photocatalytic H2 evolution from inorganic/organic ...

引用

2011 MRS Spring Meeting

作者： Zhang, Xianghui Jing, Dengwei Guo, Liejin State Key Lab of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

ISBN: (纸本)9781618395238

The Ni-doped (CuIn)0.2Zn1.6S2 photocatalysts were prepared via a two-step ultrasonic-hydrothermal method under an environmental-friendly condition. XRD pattern profiles suggested that Ni2+ successfully doped into (CuIn)0.2Zn 1.6S2 lattice. UV-Vis spectra indicated that the optical properties of the photocatalysts greatly depended on the amount of Ni doped. SEM images show that the samples were microspheres. The microsphere structures were gradually damaged with the increment of Ni doping amount. The photoactivity of (CuIn)0.2Zn1.6S2 was enhanced when Ni 2+ was doped into the crystal structure. The H2 evolution performance over the prepared samples from inorganic/organic sacrificial solution was systematic investigated. © 2011 Materials Research Society.

关键词： Microspheres

来源：评论

学校读者我要写书评

暂无评论

Liquid mean velocity and turbulence in a horizontal air-water bubbly flow

引用

Nuclear Science and Techniques 2003年第2期14卷 149-152页

作者： YANG Jian, ZHANG Ming-Yuan, ZHANG Chao-Jie, SU Yu-Liang (The state key lab of Multiphase flow in power engineering, Xi ’an Jiaotong University, Xi ’an 710049) Xi'an Jiaotong University The State Key Lab of Multiphase Flow in Power Engineering Xi'an 710049

The liquid phase turbulent structure of an air-water bubbly horizontal flow in a circular pipe has been investigated experimentally. Three-dimensional measurements were implemented with two "X" type probes oriented in different planes, and local liquid-phase velocities and turbulent stresses were simultaneously obtained. Systematic measurements were conducted covering a range of local void fraction from 0 to 11.7%. The important experiment results and parametric trends are summarized and discussed.

关键词：湍流气泡流液体速度热膜风速测定法

来源：评论

学校读者我要写书评

暂无评论

On dynamic behavior of triangular shaped cantilevers in MEMS sensors: Effect of curvature

On dynamic behavior of triangular shaped cantilevers in MEMS...

引用

2010 10th IEEE International Conference on Solid-state and Integrated Circuit Technology

作者： Zhang, Gui-Ming Zhao, Li-Bo Huang, En-Ze Yuan, Guo-Ying Li, Yong Liu, Zhi-Gang Jiang, Zhuang-De State Key Laboratory for Manufacturing Systems Engineering Xi'an Jiaotong University Xi'an 710049 China State Key Laboratory of Tribology Tsinghua University Beijing 100084 China State Key Lab of Multiple Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

ISBN: (纸本)9781424457984

A study on the effect of curvature of triangular shaped cantilevers in MEMS sensors was presented. 3-D models were performed by using the SolidWorks software. And modal analysis and harmonic response analysis were carried out on different types of geometrically configured triangular shaped cantilevers using ANSYS software. The results included the variation of natural frequencies of cantilevers and maximum equivalent von mises strain on the cantilevers with respect to radius of curvature of triangular shaped cantilevers. According to the finite element analysis results, the curvature did affect dynamic behavior of triangular shaped cantilevers in MEMS sensors. Usually, the curvature is induced by the surface stress due to microprocessing or any change of temperature, etc. Therefore, in order to achieve a steady state of strain for the MEMS sensors, it's better to eliminate the surface stress and make the cantilever transform from a curved cantilever to a straight cantilever. ©2010 IEEE.

关键词： Modal analysis

来源：评论

学校读者我要写书评

暂无评论

Study on startup characteristics of prototype once-through steam generator for China fast reactor

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2022年第1期4卷 26-35页

作者： Min, Xin Zhang, Dalin Xu, Rongshuan Wang, Shibao Chen, Youchun Wang, Chenglong Tian, Wenxi Qiu, Suizheng Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

Once-through steam generator (OTSG) is a vital heat transfer equipment of China Fast Reactor-600 (CFR-600), and its startup characteristics are of great importance to the safe operation of nuclear power plant. In this paper, first of all, the Thermal-hydraulic analysis Code Of Sodium heated once-through Steam generator (TCOSS) has been further optimized, and the code was introduced in the text. Secondly, the Steam Generator Test Facility (SGTF) and India Commercial Fast Breeder Reactor (CFBR) were selected for steady-state verification, and the feedwater flow rate increase condition of the prototype OTSG experiment was selected for transient verification. All the verifications were in good compliance, which proved the reliability of the TCOSS code for subsequent calculation of startup conditions. Finally, taking the prototype OTSG of CFR-600 as the research object, and the transient characteristics of cold startup and hot startup have been predicted and analyzed. The results show that both processes of cold startup and hot startup for prototype OTSG can be realized stably. The simulation results of startup processes showed a good agreement with expectations, which can provide support for the development of CFR-600 steam generator. © 2022 Xi'an Jiaotong University

关键词： Steam generators

来源：评论

学校读者我要写书评

暂无评论

CO₂-to-C₂H₅OH photoconversion by an amorphization-activated catalyst

Chem Catalysis

引用

Chem Catalysis 2025年第5期5卷

作者： Xue, Fei Zhang, Chunyang Liu, Maochang Liu, Feng Yan, Xueli Liu, Shangheng Peng, Huiping Hu, Zhiwei Pao, Chih-Wen Huang, Wei-Hsiang Yang, Ye Huang, Xiaoqing Xu, Yong i-lab of Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Sciences (CAS) Suzhou 215123 China State Key Laboratory of Physical Chemistry of Solid Surfaces College of Chemistry and Chemical Engineering Xiamen University Xiamen 361005 China International Research Center for Renewable Energy & State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Max Planck Institute for Chemical Physics of Solids Nothnitzer Strasse 40 Dresden 01187 Germany National Synchrotron Radiation Research Center 101 Hsin-Ann Road Hsinchu 30076 Taiwan Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province (IKKEM) Xiamen 361005 China

CO2 photoconversion into value-added C2 products with high selectivity and efficiency is formidably challenging due to highly energetic and kinetic restriction of C–C coupling. Designing catalysts to overcome those b... 详细信息

CO₂ photoconversion into value-added C₂ products with high selectivity and efficiency is formidably challenging due to highly energetic and kinetic restriction of C–C coupling. Designing catalysts to overcome those barriers is therefore crucial. Here, for the first time, we demonstrate an amorphization strategy to boost photocatalytic CO₂ ethanolization. By integrating amorphous Pd onto Cd_0.9Zn_0.1S nanorods (a-Pd/CZS), an activity of 412.1 μmol g⁻¹ h⁻¹ and a selectivity of 96.5% for CO₂-to-C₂H₅OH photoconversion were achieved without a sacrificial agent with an apparent quantum efficiency (AQE) of 0.87% at 420 nm. The superior performance results from rapid migration of photogenerated electrons to amorphous Pd via interfacial Ohmic junction. In situ characterization and theoretical calculation further reveal that amorphous Pd can optimize CO₂ adsorption/activation and reduce the C–C coupling energy barrier via intensified interaction and stabilization with a ^∗OCCO intermediate, thereby maximizing conversion efficiency and selectivity. This work highlights an efficient photocatalyst for a CO₂-to-C₂ product and inspires high-performance photocatalyst design. © 2025 Elsevier Inc.

关键词： amorphization C2H5OH CO2 photocatalytic conversion SDG7: Affordable and clean energy

来源：评论

学校读者我要写书评

暂无评论

Experimental study on dryout point in vertical narrow annulus under low flow conditions

Experimental study on dryout point in vertical narrow annulu...

引用

12th International Conference on Nuclear engineering (ICONE12) - 2004

作者： Tian, Wenxi Myint, Aye Li, Zhihui Qiu, Suizheng Su, G.H. Jia, Dounan State Key Lab. Multiphase Flow P.E. 710049 Xi'an China State Key Lab. Multiphase Flow P.E. Sch. of Energy and Power Engineering Xi'An Jiaotong University 710049 Xi'an China

Prediction of dryout point is experimentally investigated with deionized water upflowing through narrow annular channel with 1.0 mm and 1.5 mm gap respectively. The annular with narrow gap is bilaterally heated by AC current power supply. The experimental conditions covered a range of pressure from 0.8 to 3.5 MPa, mass flux from 26.6 to 68.8 kg/m2 s and wall heat flux from 5.0 to 50.0 kW/m2. The location of dryout is obtained by observing a sudden rise in surface temperature, Kutateladze correlations is cited, however proved to be not a proper one for annuli gap and modified to predict the location of dryout. Considering in detail the effects of the geometry of annuli, pressure, mass flux and heat flux on dryout, an empirical correction is finally developed to predict dryout point in narrow annular gap under low flow condition which has a good agreement with experimental data.

关键词： Two phase flow

来源：评论

学校读者我要写书评

暂无评论

Laser-induced breakdown spectroscopy in Asia

引用

Frontiers of physics 2016年第6期11卷 231-255页

作者： Zhen-ZhenWang Yoshihiro Deguchi Zhen-Zhen Zhang Zhe Wang Xiao-Yan Zeng Jun-Jie Yan State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Graduate School of Advanced Technology and Science Tokushima University Tokushima 770-8501 Japan State Key Lab of Power Systems Department of Thermal Engineering Tsinghua-BP Clean Energy Center Tsinghua University Beijing 100084 China Wuhan National Laboratory for Optoelectronics (WNLO) Huazhong University of Science and Technology Wuhan ~3007~ China

Laser-induced breakdown spectroscopy (LIBS) is an analytical detection technique based on atomic emission spectroscopy to measure the elemental composition. LIBS has been extensively studied and developed due to the non-contact, fast response, high sensitivity, real-time and multi-elemental detection features. The development and applications of LIBS technique in Asia are summarized and discussed in this review paper. The researchers in Asia work on different aspects of the LIBS study in fundamentals, data processing and modeling, applications and instrumentations. According to the current research status, the challenges, opportunities and further development of LIBS technique in Asia are also evaluated to promote LIBS research and its applications.

关键词： laser-induced breakdown spectroscopy (LIBS) quantitative analysis signal enhancement applications challenges

来源：评论

学校读者我要写书评

暂无评论

Research on the Hydrodynamic Characteristics and Metal Temperature Distribution in Spiral tube Water Wall of an Ultra Supercritical Boiler

引用

AIP Conference Proceedings 2010年第1期1207卷 199-204页

作者： Weijing Zhang Dong Yang Jie Pan Xu Zhou State Key Lab of Multiphase Flow in Power Engineering Xi’an Jiaotong University China

On the basis of a 350 MW supercritical pressure OTSC boiler, established the mathematical model for the circulation loop flow and grid pressure in a complex flow network system, and an iteration method was used to solve the nonlinear equations. The water wall flow distribution and temperature profile of the boiler were computed. The results show that the flow difference and heat difference are small in spiral tube water wall at BMCR, 75%BMCR load and 30%BMCR load. The metal temperatures are all in the range of allowable range, and the operation of boil is safe and reliable.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Stable Jet Impact Process Under Simulated Pipeline Rupture 21

Experimental Study on Stable Jet Impact Process Under Simula...

引用

21st IEEE Student Conference on Research and Development, SCOReD 2023

作者： Tao, Zhang Qincheng, Bi Jinle, Zhao Teng, Wang Jingrong, Chen Fan, Feng Xi'an Jiaotong University State Key Lab Multiphase Flow Power Engn Shaanxi Xi'an China North China Electric Power University School of Energy Power and Mechanical Engineering Bao'ding Hebei China

ISBN: (纸本)9798350318821

In this study, an advanced experimental system was utilized that incorporated heating, jetting, recycling, and cooling capabilities to ensure the successful execution of stable jet impact experiment that simulating a pipeline complete rupture. High-temperature resistant tempered glass was employed in the experimental system to realize the visibility. During the experiment, 8mm pipes/nozzles of varying lengths were employed as the test sections, and jetting phenomena when the import status is single-phase cold water or two-phase mixture at 0-2MPa were obtained by high-resolution photos. Additionally, the shape of the jet cone and the impact force exerted on the target plate were meticulously analyzed after the working fluid under different state parameters jetting into an atmospheric pressure environment through pipes/nozzles. The research also focused on the variation trend in the magnitude of the jet-impact force, as a function of inlet pressure and temperature, target plate distances, and length-to-diameter ratios. The research findings revealed that cold water(below 100°C), sub-cooled water(above 100°C but not reaching saturation temperature), and two-phase steam-water mixture exhibited distinct jet cone shapes during the jetting process, resulting in varying distributions of the jet force. Furthermore, the distance from the spout to the target plate and the length-to-diameter ratio significantly influenced the magnitude of the jet impact force. © 2023 IEEE.

关键词： Pipelines

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：