检索结果-内蒙古大学图书馆

SSRN 2023年

作者： Sun, Yinfeng Jia, Guobin Hao, Jiaqi Lu, Mingzhi Li, Guoqing Wang, Zhenhao Wu, Xueguang Modern Power System Simulation Control and Green Energy New Technol. Key Lab. The Ministry of Education Northeast Electric Power Univ. Jilin132012 China State Grid Smart Grid Research Institute Beijing China

In the high voltage direct current system based on modular multilevel converter (MMC-HVDC), the half-bridge submodule (HBSM) has become the preferred submodule for significant projects due to its convenient control and low cost. However, the DC shortcircuit protection performance of MMC-HVDC will seriously restrict its development in areas such as overhead lines, high voltage, and large capacity. This article proposes a triple capacitor multi-level submodule (TCMSM) based on a modular multilevel converter with DC fault-blocking capability. It utilizes at least one-third of the module capacitance in the bridge arm to reverse, suppress the DC fault current and turn off the diode. At the same time, the unidirectional conductivity of the diode can also prevent arc reignition at the fault point. The article also conducted in-depth research on the DC short-circuit fault elimination mechanism of this topology, and compared its performance with other topologies. Through analysis, it can be concluded that TCMSM reduces the initial investment and operating costs by reducing the number of devices inside the module while possessing the fault current blocking ability. Finally, MATlab.Simulink was used to simulate and verify the proposed new topology, and its performance was analyzed. © 2023, The Authors. All rights reserved.

关键词： Topology

来源：评论

学校读者我要写书评

暂无评论

Hierarchical Dispatch Method for Integrated Heat and power systems Based on a Feasible Region of Boundary Variables

引用

CSEE Journal of power and Energy systems 2020年第3期6卷 543-553页

作者： Tuo Jiang Yong Min Weichun Ge Lei Chen Qun Chen Fei Xu Huanhuan Luo Guiping Zhou State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijing 100084China State Grid Liaoning Electric Power Supply Co.Ltd. Shenyang 110000China Department of Engineering Mechanics Tsinghua UniversityBeijing 100084China

Fully utilizing the flexibility provided by a district heating system(DHS)can promote wind power accommodation for an electric power system(EPS).However,for privacy or communication reasons,existing power and heat dispatch methods are not suitable for practical *** this paper,a general math formulation of the hierarchical dispatch method is proposed to coordinate EPS and DHS operators based on the feasible region of boundary variables(FRBV),and a method based on the simplicial approximation approach is proposed to obtain a conservative FRBV approximation of a DHS.A simulation based on a real 41-node DHS is constructed to determine the factors that may impact the boundaries of the FRBV,and then the performance of the simplicial approximation approach is displayed by visualizing the approximation process for the FRBV,and finally three dispatch methods are compared to show the advantages of the proposed hierarchical dispatch method.

关键词： District heating system feasible region hierarchical dispatch method integrated heat and power system simplicial approximation approach

来源：评论

学校读者我要写书评

暂无评论

Improving Surface Performance of Composite Insulators by Multifunctional Nano-Coating

SSRN

引用

SSRN 2022年

作者： Liu, Shuming Liu, Shuqi Wang, Qian Zuo, Zhou Liang, Xidong Chen, Zhong State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China School of Material Science and Engineering Nanyang Technological University 639798 Singapore

Insulator is an important component of outdoor insulation systems. It works in complex environments and faces a series of problems such as surface contamination, loss of hydrophobicity, accumulation of surface charges, which may eventually lead to flashover. Aiming to solve these problems in a simple and scalab.e method, we propose a multifunctional nano-coating based on SiO 2 /PDMS/EP. By the combination of multiscale structure and low surface energy modification, this coating shows excellent water-repellency performance, a large contact angle greater than 160° and a small rolling angle near 0° are achieved on coated silicone rubber, which enables the surface with excellent self-cleaning performance. Benefiting from the multiscale roughness, the heat transfer is inhibited by the reduced contact area, which further slows down the icing process on coated silicone rubber. The de-icing force on coated silicone rubber is also smaller than that on pristine silicone rubber. This coating also introduces many shallow traps to the surface, which is beneficial to the fast surface charge dissipation in a short time. Besides, the high water-repelling ability can promote the droplet to roll away under the action of electrical field force, which alleviates the electrical distortion caused by the droplets. As a result, the wet flashover voltage of coated silicone rubber is 60% higher than that of pristine silicone rubber. This multifunctional coating is a facile, scalab.e, and effective approach to improving the comprehensive surface performance of insulators. © 2022, The Authors. All rights reserved.

关键词： Flashover

来源：评论

学校读者我要写书评

暂无评论

Analysis and Suppression of Subsynchronous Oscillation of RuDong Wind power Through MMC-HVDC system

Analysis and Suppression of Subsynchronous Oscillation of Ru...

引用

2021 Annual Meeting of CSEE Study Committee of HVDC and power Electronics, HVDC 2021

作者： Li, Jingyi Xie, Xiaorong Yang, Jianjun Li, Haozhi Shi, Zhaohui Wang, Ke Fu, Chunxiang Yang, Wenbin Key Laboratory of Far-shore Wind Power Technology of Zhejiang Province Huadong Engineering Corporation Limited Power China Zhejiang Province Hangzhou310014 China Dept. of Electrical Engineering Tsinghua University State Key Lab of Control and Simulation of Power Systems and Generation Equipment Haidian District Beijing100084 China

ISBN: (纸本)9781839537035

There may be complex interaction between the converter control systems of wind power and MMC-HVDC, which will lead to sub-/super-synchronous oscillation and threaten the safe and stable operation of the system. The relevant events have been reported in Guangdong Nan'ao, Shanghai Nanhui and Zhangbei projects. Rudong offshore wind power project is the first offshore wind power transmission system in China, and it is still under construction. Therefore, it is of great significance to carry out the research on the risk analysis and suppression measures of sub-synchronous oscillation in Rudong wind power MMC-HVDC system. First, the time-domain simulation model of Rudong wind power MMC-HVDC system is built in the PSCAD/EMTDC simulation model. Then, the effects of the number of wind turbine generators, wind power output and the parameters of MMC-HVDC controller on the sub-/supersynchronous oscillation characteristics of the system are further analyzed. Finally, the suppression measures based on supplementary frequency dependent gain control are proposed, the application position of the controller is discussed, and the parameter optimization method of the controller is given. The research content provides a certain guiding significance for the operation and control of Rudong wind power MMC-HVDC. © 2021 IET Conference Proceedings. All rights reserved.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

Research and simulation on voltage stability control strategy for AC port of power electronic transformer 16

Research and simulation on voltage stability control strateg...

引用

16th IET International Conference on AC and DC power Transmission, ACDC 2020

作者： Shen, Yu Nie, Haozhe Cai, Weiqian Yuan, Liqiang Zhang, Chunpeng Zhao, Zhengming State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China

ISBN: (纸本)9781839533914

With wide application of power electronic equipment in power system, voltage stability and power supply reliability need to be improved. In this paper, voltage sag caused by AC port load increase and the influencing factors are studies with a typical power electronic transformer topology as example. A calculation method which can estimate the port voltage sag performance according to the load impedance is proposed. In order to maintain the port voltage stability in the process of load increase, a voltage stability control strategy is proposed based on the double-loop control by increasing the voltage feedforward, which can improve the power supply quality and stability of power electronic transformer. Finally, the MATlab.Simulink simulation results show that the proposed scheme is accurate and effective. © 2020 Institution of Engineering and Technology. All rights reserved.

关键词： MATlab

来源：评论

学校读者我要写书评

暂无评论

Physical Passivation of Deep-Level Defect states in Polymer Dielectrics for Outstanding Dielectric Properties

SSRN

引用

SSRN 2023年

作者： Li, Xiao-Fen Wang, Tian-Yu Yin, Si-Jia Zhang, Gui-Xin Liu, Jian-Bo Liu, Bai-Xin School of Materials Science and Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing100084 China College of Art and Design Visual Communication Design SuZhou University Suzhou234111 China

The limited dielectric strength of polymer dielectrics hampers their reliable use in highly integrated electrical systems and high-energy storage film capacitors. This constraint is closely associated with the presence of deep-level defect states in polymer dielectrics. Here, we present an efficient and stable approach for the physical passivation of deep-level defect states aimed at enhancing the dielectric properties of polymer dielectrics. Employing inductively coupled plasma technology with argon as the carrier gas, the polymer undergoes substantial decreased deep-level defect states, as evidenced by nano-micro-region defect measurements. Consequently, the localized charge accumulation in the treated polymer dielectric is significantly reduced, resulting in a remarkable 62% increase in flashover voltage. The breakdown strength is also enhanced, and the treated material exhibits long-term stability. Moreover, materials featuring passivated deep-level defect states can boost discharge energy density without compromising efficiency. For instance, PTFE with passivated deep-level defect states maintains a discharge energy density of 1.18 J/cm3 and a charge-discharge efficiency of 95.06% at 200 °C and 300 MV/m. By focusing on deep-level defect states passivation, we introduce a strategy for receiving polymers with exceptional performance and stability. © 2023, The Authors. All rights reserved.

关键词： Passivation

来源：评论

学校读者我要写书评

暂无评论

Research on Energy Storage Capacity Configuration Method and Performance Evaluation in New Energy Base

Research on Energy Storage Capacity Configuration Method and...

引用

power and Electrical Technology Conference (APET), Asia

作者： Ruoyu Zhang Liangyou Wang Changping Sun Bo Le Mian Wang Kangsheng Cui Institute of Science and Technology China Three Gorges Corporation Beijing P.R. China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Beijing P.R. China

In order to improve the power output stability and frequency stability when large-scale new energy is integrated into the grid, large-scale new energy base must consider the configuration of energy storage systems with a certain capacity. Facing the demand under the background of new energy development, this paper analyzes the positive impact of energy storage to new energy base. The configuration method of energy storage capacity is proposed, and furthermore, the proposed method is used to calculate the capacity of the energy storage system required to be configured in a typical new energy base, and the power suppression and stability improvement effects brought by the energy storage are evaluated. The case analysis results show that the required energy storage capacity of a new energy base is about 10% of its total wind power and photovoltaic capacity. This configuration ratio can basically achieve the stability of the new energy output fluctuation, and at the same time provides the same frequency regulation capability with conventional generator set of equal capacity.

关键词： Performance evaluation Technical requirements Photovoltaic systems Fluctuations power system stability Wind power generation Stability analysis

来源：评论

学校读者我要写书评

暂无评论

Space Charge Transport of $\boldsymbol{\text{Al}_2 \mathrm{O}_3}$ /Silicone Rubber Composites Under Thermal Aging

Space Charge Transport of $\boldsymbol{\text{Al}_2 \mathrm{O...

引用

International Conference on High Voltage Engineering and Application, ICHVE

作者： Yunxiao Zhang Chenning Yan Kai Wu Yuanxiang Zhou Tianfeng Zhang College of Electrical Engineering and Automation Fuzhou University Fuzhou Fujian China Department of Electrical Engineering State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing China The Wind Solar Storage Division of State Key Laboratory of Power System and Generation Equipment School of Electrical Engineering Xinjiang University Urumqi China Electric Power Research Institute Anhui Electric Power Company of State Grid Hefei China

ISBN: (数字)9781665407502

ISBN: (纸本)9781665407519

Silicone rubber (SIR) has been widely used in the insulation of cable accessories due to its excellent performance. In this paper, pure SIR and nano $\boldsymbol{\text{Al}_2 \mathrm{O}_3 / \text{SIR}}$ composites are thermally aged for 0–80 days at $\boldsymbol{200^{\circ} \mathrm{C}}$ . The effects of long-term thermal aging on the space charge transport are analyzed. The results show that with the increase of thermal aging time, the accumulation of heteropolar charge of pure SIR and nano $\boldsymbol{\text{Al}_{2}\mathrm{O}_{3}/\text{SIR}}$ composites gradually decreases and changes to the accumulation of homopolar charge. Compared with pure SIR, the space charge accumulation of $\boldsymbol{\text{Al}_{2}\mathrm{O}_{3}/\text{SIR}}$ composites decreases significantly and changes little with the increase of thermal aging time. It is believed that when doped nano $\boldsymbol{\text{Al}_{2}\mathrm{O}_{3}}$ in SIR, the increase of carrier mobility and the introduction of metal oxides reacting with fallen free radicals to form stable compounds both lead to less space charge accumulation of $\boldsymbol{\text{Al}_{2}\mathrm{O}_{3}/\text{SIR}}$ composites.

关键词： Nanocomposites Impurities Metals High-voltage techniques Aging Space charge Thermal analysis

来源：评论

学校读者我要写书评

暂无评论

Development and prospect of direct‐current circuit breaker in China

引用

High Voltage 2021年第1期6卷 1-15页

作者： Weijiang Chen Rong Zeng Junjia He Yi Wu Xiaoguang Wei Taixun Fang Zhanqing Yu Zhao Yuan Yifei Wu Wandi Zhou Bing Yang Lu Qu STATE GRID Corporation of China BeijingChina Department of Electrical Engineering Key Laboratory of Control and Simulation of Power System and Generation EquipmentTsinghua UniversityBeijingChina School of Electric and Electronic Engineering Huazhong University of Science&TechnologyWuhanChina School of Electrical Engineering Xi'an Jiaotong UniversityXi'anChina Global Energy Interconnection Research Institute Co. LtdBeijingChina NR Electric Co. LtdNanjingChina

The direct‐current circuit breaker(DCCB)is the most ideal choice for DC fault isolation in DC *** a late start,China's research and development on the DCCB have made outstanding *** article provides a brief glance of current China's DCCB development *** begins by sorting out the technical route according to the topology of *** it systematically summarises both mechanical and hybrid DCCBs with focussing on the aspects of topology structure and principle,key technology and characteristics,prototype development and *** is apparent that Chinese scientists and engineers confronted the worldwide problem of large capacity DC breaking,and put forward a comprehensive solution which consists of an innovative topology structure based on coupled negative voltage circuit,breaking throughs on the key technologies such as highly controllab.e and reliable fault current commutation,millisecond‐level ultra‐fast and efficient electromagnetic repulsion mechanism,high tolerance and high stability power electronic switch,low residual voltage and fast response energy consumption device,*** article states that the world's first set of hybrid high‐voltage(HV)DCCB,and the first set of mechanical HV DCCB have been *** DCCBs will soon be deployed to the DC grids which have the highest voltage levels therefore require the strongest breaking *** achievements are leading the world in the development and application of *** article also discusses the overall development trends of DCCB in the areas of new topologies,key techno-logical breakthroughs and application scenarios,*** discussions serve as references for DCCB's future technological advancement and its ever‐expanding applications.

关键词： breaking breakthrough discussions

来源：评论

学校读者我要写书评

暂无评论

A strategy for avoiding overload of AC line after blocking dc line in AC/DC hybrid grid 15

A strategy for avoiding overload of AC line after blocking d...

引用

15th International Conference on Developments in power system Protection, DPSP 2020

作者： Wang, Hao Kang, Xiaoning Dong, Xinzhou Shaanxi Key Laboratory of Smart Grid Xi'an Jiaotong University Xi'an China State Key Laboratory of Control and Simulation Power System and Generation Equipment Tsinghua University Beijing China

ISBN: (纸本)9781713827894

The development of DC transmission technique is prompting the development of AC/DC hybrid grid. As a new form of the grid, AC/DC hybrid grid faces many challenges one of which is the effect of DC blocking on AC lines. This paper analyses the influence of DC blocking on AC lines. Based on the analysis, a control strategy using wide area information is proposed to avoid the severe overload of AC line after blocking a DC line. The proposed strategy increases the transmission power of normally operating DC line aiming to afford part or all of the transmission task of the blocked DC line. The test result obtained from simulation indicates that the proposed strategy can reduce the overload of AC line after blocking a DC line. © 2020 IET Conference Publications.

关键词： Transmissions

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：