检索结果-内蒙古大学图书馆

7th Optics Young Scientist Summit, OYSS 2024

作者： Ye, Yun Wang, Xiaolin Wang, Yanbin Zhou, Xuanfeng Jiang, Chenglong Zhang, Defeng Xi, Xiaoming Xu, Xiaojun State Key Lab. of Complex Electromagnetic Environment Effects on Electronics and Information System Luoyang471003 China College of Advanced Interdisciplinary Studies National University of Defense Technology Changsha410073 China

ISBN: (数字)9781510688377

ISBN: (纸本)9781510688360

Compared to conventional uniform fibers, long tapered Yb-doped fibers (T-YDF) have outstanding potential to alleviate the detrimental nonlinear effects due to their unique mode field characteristics along the length direction. In this work, an T-YDF-based short-wavelength narrow linewidth monolithic fiber amplifier was constructed through one-stage MOPA configuration. The fiber amplifier emits at the central wavelength of ~1050 nm, and the output lasing performance is carefully studied for different pumping scheme. The experimental results indicated that compared with the co-pumping scheme, the counter-pump one holds a better properties involving spectral broadening suppression, SRS suppression and TMI threshold enhancement in the 1050 nm narrow-linewidth fiber lasers. As a result, an output power of 3.56 kW was achieved with a slope efficiency of ~83.6% by adopting bidirectional pumping scheme. At the maximum lasing power, the 3dB spectral linewidth was measured ~0.58 nm, and the SRS suppression ratio was greater than ~27.3dB. This work could offer a promising approach for extending the operating wavelength of high-power narrow linewidth fiber lasers. © 2025 SPIE.

关键词： Fiber lasers

来源：评论

学校读者我要写书评

暂无评论

Fine-Tuning the Resonant Frequency in electromagnetic Vibration Energy Harvesting System 5th

Fine-Tuning the Resonant Frequency in Electromagnetic Vibrat...

引用

5th International Conference on Vibration and Energy Harvesting Applications, VEH 2024

作者： Ma, Haosheng Peng, Han Xiao, Hongfei Sun, Hanyi Zhao, Yidong Lei, Junhao State Key Lab of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan China China-EU Institute for Clean and Renewable Energy Huazhong University of Science and Technology Wuhan China

ISBN: (纸本)9789819611904

The electromagnetic vibration energy harvesting system is designed to extract energy from the vibrations, with its resonant frequency specifically tuned to match the primary vibration frequency of the energy source. However, the vibration frequency often deviates from resonant frequency under different operation/weather and installation circumstances. Such deviation can lead to a significant decrease in the collected output power. For example, a 1 Hz deviation in the vibration frequency results in a 51.3% decrease in induced voltage and a 76.3% decrease in output power. state-of-the-art wideband EVEH devices have either low output power or relatively large volume. Adopting a wideband EVEH is not a good choice. To address this issue, this paper proposes a new approach for fine-tuning the resonant frequency of EVEH by changing the structure of the spring. The details of the method is to add or remove bridge arms changing the rotation angle of the cantilever beams. The advantage of this method lies in the convenience of finely tuning the device's frequency while obtaining a larger output power. The results demonstrate that for the EVEH device designed at a resonant frequency of 60 Hz, the primary resonant frequency can vary from 58.5 to 59.5 Hz by nylon bridge arms. At resonant frequencies of 59 Hz and 0.5 g acceleration, the output voltage is increased by 77.1%. Output power reaches 15 mW, representing a 213.8% improvement. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.

关键词： Energy harvesting

来源：评论

学校读者我要写书评

暂无评论

Programming anti-ribozymes to sense trigger RNAs for modulating gene expression in mammalian cells

引用

Synthetic and Systems Biotechnology 2025年第3期10卷 827-834页

作者： Zhang, Wenhui Zhao, Shi Wang, Mengyuan Lou, Chunbo Xiang, Yanhui Wu, Qiong Center for Cell and Gene Circuit Design CAS Key Laboratory of Quantitative Engineering Biology Shenzhen Institute of Synthetic Biology Shenzhen Institutes of Advanced Technology Chinese Academy of Sciences Shenzhen 518055 China State Key Laboratory of Green Biomanufacturing MOE Key Lab. Bioinformatics Center for Synthetic and Systems Biology School of Life Sciences Tsinghua University Beijing 100084 China

Synthetic RNA-based switches provide distinctive merits in modulating gene expression. Simple and flexible RNA-based switches are crucial for advancing the field of gene regulation, paving the way for innovative tools that can sense and manipulate cellular processes. In this research, we have developed programmable ribozymes that are capable of suppressing gene expression in response to specific, endogenously expressed trigger RNAs. We engineer ribozymes by introducing upstream antisense sequences (anti-ribozymes) to inhibit the self-cleaving activity of the hammerhead ribozyme and open the expression of the target gene. The trigger RNA is designed to recognize and bind to complementary sequences within the anti-ribozymes, thereby inhibiting their ability to direct protein synthesis. The anti-ribozyme performance is optimized by regulating the essential sequence modules that play a crucial role in determining the specificity and efficiency of the anti-ribozyme's interaction with its trigger RNA. By applying this switch mechanism to various ribozyme designs, we have shown that it is possible to achieve control over gene expression across a wide range of trigger RNAs. By exploiting these programmable anti-ribozymes, we aim to create a powerful tool for controlling gene expression in mammalian cells, which could have important implications for basic research, disease diagnosis, and therapeutic interventions. © 2025 The Authors

关键词： Anti-ribozyme Antisense RNA sequence Gene expression regulation Ribozyme RNA-based switch Trigger RNA sequence

来源：评论

学校读者我要写书评

暂无评论

Fabrication and characterization of mullite fiber-based porous ceramics with mixed fiber lengths for high-temperature gas filtration

引用

Ceramics International 2025年

作者： Zheng, Dazhi Zhu, Ruijian Hu, Yuwen Liang, Shiou Sun, Huiying Wang, Zengmei State Key Laboratory of Engineering Materials for Major Infrastructure Jiangsu Key Lab. of Construction Materials School of Materials Science and Engineering Southeast University Nanjing211189 China School of Materials Science and Engineering Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology Nanjing Institute of Technology Nanjing211167 China

The emissions and particulate pollutants (PM) from industrialization and other human activities have become a significant threat to human health. Researchers have experimented with various fiber-bonded filters, but there are still relatively few products with good high-temperature resistance. In this paper, a fiber-bonded porous ceramic with high porosity was prepared by vacuum filtration combined with freeze-drying using two homemade mullite fibers with different length-to-diameter ratios as raw materials and mullite sol as binder. When the content of fine fibers is 40 %, the product has a better overall performance, its density is 0.63g/cm3, porosity is 74 %, strength is 0.77 MPa, thermal conductivity is 0.153 W m−1 K−1. When the airflow rate of 2 L/min, the pressure drop is 80 Pa, the filtration efficiency of about 99 %, the QF is 0.08 pa−1, The mullite fiber-bonded porous ceramics prepared through a simple process exhibit excellent filtration performance, offering a wide range of potential applications. © 2025

关键词： Thermal conductivity of gases

来源：评论

学校读者我要写书评

暂无评论

Minimum Steady-state Fault Current of GridForming Inverters With Virtual Impedance-Based Current Limiting Caused by Active Power Control

引用

IEEE Transactions on Power Electronics 2025年

作者： Liu, Tao Shi, Xiaojie Yan, Jianan Wang, Zhiqiang Yin, Tianxiang Lin, Lei State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering Wuhan430074 China Imperial College London Energy Futures Lab Control and Power Group Electrical and Electronic Engineering Department LondonSW7 2AZ United Kingdom

Fault current limiting based on virtual impedance (VI) has been widely utilized in grid-forming (GFM) inverters. The VI magnitude is generally designed to its maximum value under the worst case, which reduces the point of common coupling (PCC) voltage magnitude to limit the steady-state fault current. However, this letter reveals that due to the constraints imposed by the active power control during the steady state, as the PCC voltage magnitude decreases, its phase angle increases, which has been ignored. The opposite effects of VI on the PCC voltage magnitude and phase angle lead to a minimum steady-state fault current that is independent of VI. During severe grid voltage sags, this minimum steady-state fault current can exceed the current limit, making the effective fault current limiting impossible by using VI alone. This finding provides new insights into the steady-state analysis and control optimization of GFM inverters. Experimental results validate the theoretical findings. © 1986-2012 IEEE.

关键词： Grid-forming control minimum steady-state fault current virtual impedance (VI)- based current limiting

来源：评论

学校读者我要写书评

暂无评论

Epitaxy growth of NaF needle-like nanocrystals on Ag NPs@AgBr in the PTR glass

引用

Journal of Non-Crystalline Solids 2025年 660卷

作者： Lu, Ping Hu, Anjun Zheng, Wenyan Chen, Jiayuan Qiu, Jianbei Xu, Yinsheng Qiao, Xvsheng School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China State Key Laboratory of Silicate Materials for Architectures Wuhan University of Technology Wuhan430070 China Key Laboratory of Rare Earth Optoelectronic Materials and Devices of Zhejiang Province Institute of Optoelectronic Materials and Devices China Jiliang University Hangzhou310018 China Faculty of Material Science and Engineering Kunming University of Science and Technology Kunming650093 China Key Lab. of Advanced Materials of Yunnan Province Kunming650093 China State Key Laboratory of Silicon Materials School of Materials Science and Engineering Zhejiang University Hangzhou310027 China

Photo-thermo-refractive (PTR) glass enables permanent refractive index modulation for volume Bragg grating devices, yet precise NaF crystal precipitation remains challenging. This study investigates the crystallization mechanism of NaF in PTR glass, emphasizing the roles of Ce, Ag, and Br dopants. Ce3+ acts as a photosensitizer, absorbing UV photons to release electrons that reduce Ag+ to Ag0 atoms, which aggregate into Ag nanoparticles (Ag NPs) during thermal treatment. Br− promotes the formation of AgBr shells on Ag NPs (Ag NPs@AgBr), evidenced by a redshifted surface plasmon resonance (460 nm) and lattice-matching heterostructures observed via HRTEM. The Ag NPs@AgBr heterojunction serves as nucleation sites for NaF crystallization, leveraging the low lattice mismatch between cubic AgBr (Fm3m) and NaF (Fm3m) to enable epitaxial growth. These insights refine the understanding of PTR glass crystallization dynamics, offering a framework for optimizing optical performance through tailored dopant interactions and crystallization conditions. © 2025 Elsevier B.V.

关键词： Lattice mismatch

来源：评论

学校读者我要写书评

暂无评论

21.77 Tbps WDM-SDM-PDM Self-Homodyne Coherent Optical Transmission Based on Probabilistic Amplitude Shaping with Cascaded Staircase and Hamming Codes

引用

IEEE Transactions on Communications 2025年

作者： Li, Yutian Tian, Feng Xin, Xiangjun Wu, Tianze Zhou, Jianwei Zhang, Qi Dong, Ze Beijing University of Posts and Telecommunications State Key Laboratory of Information Photonics and Optical Communications Beijing Key Lab. of Space-round Interconnection and Convergence Sch. of Electron. Eng. Beijing100876 China Beijing University of Posts and Telecommunications School of Electronic Engineering Beijing100876 China Beijing Institute of Technology School of Information and Electronics Beijing100081 China Beijing Institute of Technology Advanced Research Institute of Multidisciplinary Science Beijing100081 China

This paper proposes a probabilistic amplitude shaping (PAS) scheme with systematic cascaded staircase and Hamming codes (CSHC). The integration of low-complexity concatenated codes within PAS and the use of the SIHO decoder are enabled by applying the inter-bit independence assumption. This ensures compatibility with high throughput transmission. In addition, the use of a reduced test pattern set in the SIHO decoder reduces the test pattern cardinality by 34.37%. The proposed scheme is experimentally demonstrated by self-homodyne coherent transmission over a 22.5 km 7-core fiber, with 21 wavelength division multiplexing (WDM) channels in the C-band is demonstrated. The total rate of the WDM-space division multiplexing (SDM) system is 21.77 Tbit/s. The experimental results show that the proposed PAS scheme with CSHC provides a gain of more than 8 dB in the back-to-back (BtB) scenario at the pre-FEC BER of 2.88E-2. Moreover, an average gain of 7.26 dB is achieved at the same threshold in WDM-SDM transmission. © 2025 IEEE.

关键词： Forward error correction

来源：评论

学校读者我要写书评

暂无评论

Fretting wear mechanism of GH4169 dovetail joint specimens treated with hybrid laser shock peening

引用

Tribology International 2025年 209卷

作者： Fang, Xiuyang Wang, Zheng Wahab, Magd Abdel Gong, Jianen Liu, Xiong Liu, Xing Cai, Zhenbing School of Mechanical Engineering Southwest Jiaotong University Chengdu610031 China Tribology Research Institute Key Lab of Advanced Technologies of Materials Southwest Jiaotong University Chengdu610031 China Soete Laboratory Department of Electrical Energy Metals Mechanical Constructions and Systems Faculty of Engineering and Architecture Ghent University Gent9000 Belgium College of Engineering Yuan Ze University Taiwan China Parallel and Distributed Systems Laboratory Jožef Stefan Institute Jamova cesta 39 LjubljanaSI-1000 Slovenia DongFang Electric Machinery Co. LTD Deyang618000 China State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Hubei Wuhan430074 China

Aero engine blade structure is prone to severe fretting wear under centrifugal forces and vibration loads, resulting in greatly reduced engine service life, which is a typical fretting damage problem. In this paper, without Absorbing layer Nanosecond Laser Shock Peening (wAN-LSP) and without Absorbing layer Nanosecond superimposed Femtosecond hybrid Laser Shock Peening (NF-LSP) are utilized to strengthen the surface of GH4169 dovetail joint specimens, which is a common material for engine blades, to explore its strengthening mechanism and fretting wear evolution law. The findings indicate that the surface roughness of the wAN-LSP specimen rises from 0.28 μm to 1.16 μm. The thermal effects of wAN-LSP lead to the formation of a molten layer roughly 10.97 μm thick on the surface, accompanied by numerous pits, ablation holes, and micro-cracks. In contrast, NF-LSP treatment effectively eliminates the surface oxidation defects made by the thermal effects of wAN-LSP, leading to a slight decrease in surface roughness. Both wAN-LSP and NF-LSP treatments enhance the surface hardness of the specimens, creating a plastic deformation layer roughly 400 μm deep, but the near surface hardness of NF-LSP treated specimen is further improved compared to that of the wAN-LSP specimen. The wear mechanism observed in the GH4169 dovetail joint specimens following wAN-LSP and NF-LSP treatment are identified as abrasive wear and oxidation wear. Initially, as the number of cycles raises, the wear volume of GH4169 specimen treated with wAN-LSP is higher than that of untreated specimen, but subsequently, it becomes lesser than that of the untreated specimen. This phenomenon results from the interplay between the molten layer and hardened layer. In the initial stage of wear, despite the surface strengthening of the wAN-LSP specimen, the presence of molten layer significantly diminishes the fretting wear resistance of the material. As wear progresses, the molten layer is removed, revealing the be

关键词： Abrasion

来源：评论

学校读者我要写书评

暂无评论

On the charged aerosols generated by atmospheric pressure non‐equilibrium plasma

引用

High Voltage 2021年第3期6卷 408-425页

作者： Yanzhe Zhang He Cheng Haotian Gao Dawei Liu Xinpei Lu State Key Lab of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuHanHuBeiChina

Recently,charged aerosols are used widely in many applications,such as fog elimination,inactivation of airborne viruses and so *** pressure non‐equilibrium plasma(APNP)have become an efficient way to generate charged *** the traditional pin‐plate or wire‐plate APNP sources,the new APNP sources such as large scale corona discharge system and air plasma jet array are *** sources can increase the ion density in open air and generate adjustable large plasma plume,which are helpful in increasing the charging efficiency on *** the interactions between plasma and aerosols is quite complicated,the preliminary study suggests that the diffusion charging dominates aerosols below 0.1μm,field charging dominates aerosols larger than 1μm,and the photo charging also contributes to aerosols *** reactive charged aerosols have shown their potential in the artificial rain enhancement,biomedicine,and ma-terial ***,challenges and opportunities for theoretical,experimental,and application research in related cross‐disciplinary areas are presented to stimulate critical discussions and collab.rations in the future.

关键词： equilibrium charging discussions

来源：评论

学校读者我要写书评

暂无评论

DEVELOPMENT OF THE BEAM DIAGNOSTIC SYSTEM OF THE HUST-PTF TRANSPORT LINES 13

DEVELOPMENT OF THE BEAM DIAGNOSTIC SYSTEM OF THE HUST-PTF TR...

引用

13th International Beam Instrumentation Conference, IBIC 2024

作者： Zhou, Shaokun Liu, Chengyong Chen, Yu Qin, Bin Chen, Qushan Liu, Xu Li, Dong Chen, Aote Liao, Yicheng Luo, Ruiying Wang, Wei State Key Lab. of Advanced Electromagnetic Engineering & Technology Huazhong University of Science & Technology Wuhan China

ISBN: (纸本)9783954502493

Huazhong University of Science and technology is building a cyclotron-based Proton Therapy Facility (HUST-PTF). The facility mainly consists of a 240 MeV superconducting cyclotron, a beam transport line, a fixed treatment room and two rotational treatment rooms. HUST-PTF uses three kinds of detectors, Scintillation, Faraday cup and ionization chamber, for the beam parameter measurements. In terms of structure, the HUST PTF beam diagnostic system is built according to the standard distributed three-layer structure, which is divided into hardware device layer, data processing layer and GUI layer. Different protocols are used to communicate between the three layers, which can improve reliability and expand flexibly in each layer. © 2024 International Beam Instrumentation Conference. All Rights Reserved.

关键词： Ionization chambers

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：