检索结果-内蒙古大学图书馆

SSRN 2023年

作者： Zeng, Xian Wang, Youyuan Wang, Meng Wang, Zheng Long, Ziqiang Li, Bei Cao, Qian Cheng, Xudong School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Research Center for Materials Genome Engineering Wuhan University of Technology Wuhan430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

In this study, MgO doped ZrO2 thermal control coatings were prepared using atmospheric plasma spraying technology. The phase composition, microstructure, optical properties of the coatings were characterized. The results showed that all the coatings possessed an obvious laminar structure. With the increase of MgO doping content, the chemicals of the coatings showed a trend of transition from monoclinic to cubic phase. Moreover, the solar absorptance (αs) effectively decreased, while the hemispherical emissivity (ΕH) increased. When the doping content reached 20 mol%, the ΕH/αs obtained a minimum value of 0.475, where the αs and ΕH was 0.399and 0.8395 correspondingly. Though the impurity levels introduced by the oxygen vacancies were beneficial to enhancing the intrinsic absorption in the 0.3~0.75 μm wave band, the decrease of free carrier concentration attenuated the free carrier absorption and weakened the emission property in the 0.75~7 μm wave band, resulting in a declining of αs. The enhancement of the hemispherical emissivity ΕH was attributed to the lattice distortion, which strengthen the radiation capability in the 7~25 μm wave band. © 2023, The Authors. All rights reserved.

关键词： Magnesia

来源：评论

学校读者我要写书评

暂无评论

Printing strategies for scaling-up perovskite solar cells

引用

National Science Review 2021年第8期8卷 69-92页

作者： Yulong Wang Changyu Duan Pin Lv Zhiliang Ku Jianfeng Lu Fuzhi Huang Yi-Bing Cheng Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory State Key Laboratory of Silicate Materials for Architectures Wuhan University of Technology State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Department of Materials Science and Engineering Monash University

Photovoltaic technology offers a sustainable solution to the problem of soaring global energy ***, metal halide perovskite solar cells(PSCs) have attracted worldwide interest because of their high power conversion efficiency of 25.5% and great potential in becoming a disruptive technology in the photovoltaic industry. The transition from research to commercialization requires advancements of scalab.e deposition methods for both perovskite and charge transporting thin films. Herein, we share our view regarding the current challenges to fabrication of PSCs by printing techniques. We focus particularly on ink technologies, and summarize the strategies for printing uniform, pinhole-free perovskite films with good crystallinity. Moreover, the stability of perovskite solar modules is discussed and analyzed. We believe this review will be advantageous in the area of printable electronic devices.

关键词： printing technology perovskite solar cells ink large-area crystallization module stability

来源：评论

学校读者我要写书评

暂无评论

Carbon nanotubes modified MXene film as a high-performance electrode for supercapacitor

Carbon nanotubes modified MXene film as a high-performance e...

引用

2022 International Conference on Optoelectronic Information and Functional materials, OIFM 2022

作者： Wang, Yesheng Kong, Dongqing Cui, Yongpeng Xing, Wei State Key Laboratory of Heavy Oil Processing School of Material Science and Engineering China University of Petroleum Qingdao266580 China Weifang Key Lab of Advanced Light Materials Manufacturing and Forming Weifang University of Science and Technology Weifang262700 China

ISBN: (数字)9781510655126

ISBN: (纸本)9781510655119

As a new family of 2D material, MXene has shown a huge potential in the application of supercapacitor because of their superior conductivity, abundant active sites and the stable layered structure. However, the electrochemical performance of MXene-based electrodes is limited by the stacking of the nanosheets. Herein, the flexible carbon nanotube (CNT) modified Ti3C2 (CNT@Ti3C2-300) film was obtained via facile filtration of the MXene and CNT suspension mixture followed by annealing. The CNT could effectively pillar the interlayer space of the nanosheets to avoid the layeraggregation and create a cross-linked conductive network in the film. The hybrid film exhibits high capacitance of 366.7 F g-1 at a current density 1 A g-1, excellent rate performance up to 75.1% at 20 A g-1 and long cycling life (98.7 % capacitance retention after 8000 cycles at 20 A g-1). The above results indicate its huge potential application as flexible supercapacitors electrode. © 2022 SPIE.

关键词： Carbon nanotubes

来源：评论

学校读者我要写书评

暂无评论

In-situ ZrB2-hBN ceramics with high strength and low elasticity

引用

Journal of materials Science & technology 2020年第13期47卷 186-193页

作者： Ji Zou Guo-Jun Zhang Zheng-Yi Fu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China School of Metallurgy and Materials University of BirminghamB152TTBirminghamUK State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Institute of Functional MaterialsDonghua UniversityShanghai 201620China

ZrB2 ceramics with various hexagonal BN(hBN)additions up to 37 vol%were reactively densified by spark plasma sintering using powder mixtures containing ZrB2,ZrN and ***-boron based additives effectively promoted the densification process,ZrB2 ceramics reached>99%relative density at 2000℃and an applied pressure of 60 MPa with only 5 vol%in-situ formed hBN,whereas the relative density of pure ZrB2 was only 91.2%at the same *** thehBN contents,the morphology of hBN grains gradually changed from quasi-spherical to flake dominated,which has substantial influence on their mechanical ***-situ ZrB2-10 vol%hBN ceramics demonstrated high flexural strength of 597±22 MPa,relatively low Young’s modulus of 406 GPa and good machinability,especially for the impressively large strain to failure(1.47×10^-3)which is superior to most of their counterparts in the ZrB2 based particulate reinforced ceramics.

关键词： ZrB2 Reactive sintering Spark plasma sintering Boron nitride containing ceramics Mechanical property

来源：评论

学校读者我要写书评

暂无评论

Interwoven scaffolded porous titanium oxide nanocubes/carbon nanotubes framework for high-performance sodium-ion battery

引用

Journal of Energy Chemistry 2021年第8期30卷 38-46,I0002页

作者： Wen-Bei Yu Wen-Da Dong Chao-Fan Li Nasiruddin Macadam Jiu-Xiang Yang Guo-Bin Zhang Zhi-Yi Hu Tien-Chun Wu Yu Li Tawfique Hasan Li-Hua Chen Li-Qiang Mai Bao-Lian Su State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Cambridge Graphene Centre University of Cambridge9 JJ Thomson AvenueCB30FA CambridgeUnited Kingdom Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan 430070China Laboratory of Inorganic Materials Chemistry(CMI) University of Namur61 rue de Bruxelles5000 NamurBelgium

Supercapacitor-like Na-ion batteries have attracted much attention due to the high energy density of batteries and power density of *** dioxide(TiO_(2)),is a promising anode *** performance is however seriously hindered by its low electrical conductivity and the sluggish diffusion of sodium ions(Na^(+))in the TiO_(2)***,this work combines porous TiO_(2)nanocubes with carbon nanotubes(CNTs)to enhance the electrical conductivity and accelerate Na^(+)diffusivity for Na-ion batteries(NIBs).In this composite,an interwoven scaffolded TiO_(2)/CNTs framework is formed to provide abundant channels and shorter diffusion pathways for electrons and *** in-situ X-ray diffraction and cyclic voltammetry confirm the low strain and superior transport kinetics in Na^(+)intercalation/extraction *** addition,the chemically bonded TiO_(2)/CNTs hybrid provides a more feasible channel for Na^(+)insertion/extraction with a much lower energy ***,the TiO_(2)/CNTs composite exhibits excellent electrochemical performance with a capacity of 223.4 m Ah g^(-1)at 1 C and a capacity of 142.8 m Ah g^(-1)at 10 C(3.35 A g^(-1)).The work here reveals that the combination of active materials with CNTs can largely improve the utilization efficiency and enhance their sodium storage.

关键词： Supercapacitor-like Interwoven scaffold Na-ion battery TiO_(2) Carbon nanotubes

来源：评论

学校读者我要写书评

暂无评论

Hybrid architecture design enhances the areal capacity and cycling life of low-overpotential nanoarray oxygen electrode for lithium–oxygen batteries

引用

Journal of Energy Chemistry 2020年第7期29卷 248-255,I0008页

作者： Liang Xiao Duo Wang Ming Li Bohua Deng Jinping Liu School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070HubeiChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina

Transition metal oxide(TMO)nanoarrays are promising architecture designs for self-supporting oxygen electrodes to achieve high catalytic activities in lithium-oxygen(Li-O2)***,the poor conductive nature of TMOs and the confined growth of nanostructures on the limited surfaces of electrode substrates result in the low areal capacities of TMO nanoarray electrodes,which seriously deteriorates the intrinsically high energy densities of Li-O2 ***,we propose a hybrid nanoarray architecture design that integrates the high electronic conductivity of carbon nanoflakes(CNFs)and the high catalytic activity of Co3 O4 nanosheets on carbon cloth(CC).Due to the synergistic effect of two differently featured components,the hybrid nanoarrays(Co3 O4-CNF@CC)achieve a high reversible capacity of3.14 mA h cm-2 that cannot be achieved by only single ***,CNFs grown on CC induce the three-dimensionally distributed growth of ultrafine Co3 O4 nanosheets to enable the efficient utilization of ***,with the high catalytic efficiency,hybrid Co3 O4-CNF@CC also achieves a more prolonged cycling life than pristine TMO *** present work provides a new strategy for improving the performance of nanoarray oxygen electrodes via the hybrid architecture design that integrates the intrinsic properties of each component and induces the three-dimensional distribution of catalysts.

关键词： Hybrid architecture Nanoarray oxygen electrode Synergistic effect Three-dimensional current collector Lithium-oxygen batteries

来源：评论

学校读者我要写书评

暂无评论

Ultrahigh Yield Strength Heterostructured Titanium Matrix Composites by Controlling Α Variant Selection

SSRN

引用

SSRN 2023年

作者： Zhu, Ke Huang, Jin Nie, Wei Liu, Ruxia Xiao, Yong Zhang, Jian Luo, Guoqiang Shen, Qiang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Institute for Carbon Neutrality University of Science and Technology Beijing Beijing100083 China School of Material Science and Engineering

Enhancing the strength and plasticity of materials in a synergistic manner is a longstanding challenge in materials science. The content of β-stabilizing element W in Ti alloys is controlled using a chemical boundary engineering (CBE) strategy. Heterostructured Ti-xW composites are designed with α grain boundaries as the outer shell, α/β lamellar organization as the intermediate transition layer, and acicular martensite as the core region. This material exhibits a remarkable compressive yield strength of 2100 MPa, surpassing the majority of reported titanium matrix composites. The exceptional strength primarily arises from the precipitation strengthening of α/β lamellar organization and acicular martensite in the core region. Additionally, the gradient structure resulting from varying concentrations of W elements contributes to hetero-deformation induced (HDI) strengthening. This study holds significant implications for the development and design of high-strength heterostructured titanium matrix composites. © 2023, The Authors. All rights reserved.

关键词： Martensitic transformations

来源：评论

学校读者我要写书评

暂无评论

Local structural origin of relaxor antiferroelectric behavior in NaNbO3-based ceramics

引用

Chemical Engineering Journal 2025年 514卷

作者： Meng, Xiangyu Yuan, Liran Li, Dongxu Wang, Pengbin Guo, Qinghu Gan, Xiaoyan Yao, Zhonghua Liu, Hanxing Wu, Jinsong Zhang, Shujun Hao, Hua State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory Foshan528200 China Nanostructure Research Center Wuhan University of Technology Wuhan430070 China Institute for Superconducting and Electronic Materials Faculty of Engineering and Information Sciences University of Wollongong WollongongNSW2500 Australia

Relaxor-antiferroelectrics (relaxor-AFEs), known for their double polarization–electric field (P-E) hysteresis loops and relaxor characteristics, exhibit outstanding energy storage performance compared to other dielectric materials. However, the origins of their antiferroelectric-like behavior and relaxor features remain unclear due to their complex local structure. In this study, we designed relaxor-AFEs with a high degree of relaxor component and stable antiferroelectric behavior. The recoverable energy density (Wrec) of up to 4.6J/cm3 and energy efficiency of ∼ 79 % were achieved in a 0.76NaNbO3-0.16Na0.5Bi0.5TiO3-0.08CaTiO3 ceramic, demonstrating excellent thermal and frequency stability. The multiphase local polarization configuration was confirmed by atomic-resolution annular dark-field scanning transmission electron microscopy (ADF STEM). Additionally, integrated differential phase contrast (iDPC) images revealed an enhanced antiferrodistortion (AFD) induced by incorporating component with low tolerance factor, contributing to stable antiferroelectric behavior. The relationship between chemical heterogeneity, polarization configuration and energy storage performance was systematically established. This work provides insights into the structure origin and underlying mechanisms for relaxor-AFE performance, with potential implications to guide the development of advanced energy-storage dielectric materials. © 2025 Elsevier B.V.

关键词： Antiferroelectric materials

来源：评论

学校读者我要写书评

暂无评论

Microstructural Evolution of Defects Under Proton Irradiation in Porous Cu

SSRN

引用

SSRN 2024年

作者： Li, Honglin Wang, Hao Huang, Zhifeng Wen, Pin Yin, Guanchao Chen, Fei Hubei Longzhong Laboratory Xiangyang441106 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of Science Wuhan University of Technology Wuhan430070 China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences Lanzhou730000 China

The high specific strength and exceptional thermal insulating properties of porous metals make them an ideal choice for aerospace structural components and thermal insulation materials. However, in the space environment, proton irradiation leads to the formation of voids, bubbles, and dislocation loops, significantly compromising their physical and mechanical properties. To date, there has been limited attention to the radiation resistance properties in research related to porous metals. This study conducted proton irradiation experiments with a total dose of 1×1017 ions/cm2 on porous Cu. This study discusses and explains the irradiation-induced damage characteristics on the surface of porous Cu before and after proton irradiation. This provides insights into the radiation damage mechanisms within the porous Cu ligaments and the hydrogen release behavior on the ligament surface. Cascade recoil and collision-induced thermal spike effects modify material defect characteristics and crystal structure. This study elucidates the defect evolution mechanism of porous materials under proton irradiation, offering new insights for the design of other radiation-resistant porous materials as protective materials for future advanced space probes. © 2024, The Authors. All rights reserved.

关键词： Radiation damage

来源：评论

学校读者我要写书评

暂无评论

Multifunctional additives for the enhanced performance of the doctor-blading printed perovskite solar modules

引用

Journal of Energy Chemistry 2025年 109卷 368-377页

作者： Linyong Tian Haoyu Cai Zhenyue Wang Yongjun Liu Juan Zhao Guodong Liu Yaqi Cheng Biqi He Hongfei Zhang Long Jiang Bofei Xue Yi-Bing Cheng Jie Zhong State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan Hubei 430070 China Nanjing Aolian Light Energy Technology Co. Ltd. Nanjing Jiangsu 320115 China School of Automobile Engineering Wuhan University of Technology Wuhan Hubei 430070 China State Key Laboratory of Oil and Gas Equipment CNPC Tubular Goods Research Institute Xi’an 710077 Shaanxi China Shaanxi Provincial Key Laboratory of Clean Energy Equipment and Materials Xi’an 710077 Shaanxi China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan Guangdong 528216 China

The utilization of self-assembled monolayers (SAMs) has significantly elevated the power conversion efficiency (PCE) of inverted perovskite solar cells (PSCs). However, the inherent hydrophobicity of these SAMs poses challenges in the subsequent printing of perovskite films in PSC upscaling. In this work, we incorporated a multifunctional additive, dimethyl suberimidate dihydrochloride (DMSCl 2 ), into the perovskite precursor to enhance the quality of the blade-coated perovskite film on the SAM interlayer. Characterizations revealed that the function groups of the imino (N–H) and methoxy (CH 3 O–) DMSCl 2 facilitate both bonding between perovskite precursor and SAM molecule (Me-4PACz), which facilitates the large-area printing of perovskite film. These interactions also provide effective passivation within the perovskite films and interface defects of PSCs. As a result, a significantly enhanced PCE from 16.62% to 20.37% was obtained for the printed perovskite solar module (93.10 cm 2 ) and 25.27% for the small device (0.09 cm 2 ). Remarkable stability was achieved with 93.3% of their initial PCE after 1000 h of continuous maximum power point (MPP) tracking. This report suggests that multifunctional additive doping provides a convenient route for the upscaling of perovskite solar cells with SAM interlayers.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：