检索结果-内蒙古大学图书馆

arXiv 2021年

作者： Fan, Youjun Shen, Zhonghui Zhou, Xinchen Dan, Zhenkang Zhou, Le Ren, Weibin Tang, Tongxiang Bao, Shanyong Nan, Cewen Shen, Yang State Key Lab of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Beijing100084 China Center for Flexible Electronics Technology Tsinghua University Beijing100084 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and Devices Wuhan University of Technology Wuhan430070 China

Flexible strain sensors are critical to several potential intelligent applications, such as human-machine interfaces, soft robotics, human motion detection, and safety monitoring of components. Stretchable functional materials are important components of strain sensors, and they are still major challenges for high performance strain sensors. Herein, we demonstrate a novel strategy of designing and optimizing flexible strain sensor by developing topological structure modulated high permittivity elastic nanocomposite. The topological structure with three-phase percolative nano-nanonetworks produces synergistic effects of space charge enhancement and local electric field modulation, and it gives rise to an ultrahigh dielectric permittivity (113.4, at 1 kHz, over 1500% enhancement than that of commercial elastic polyurethane matrix) and excellent comprehensive electromechanical performance, and the optimal comprehensive electromechanical performance reaches to 542.91 MPa-1, which is over 9-fold than that of commercial polyurethane elastic film. An interdigital capacitive strain sensor is designed using the topological structured elastic dielectric nanocomposite. It possesses high initial capacitance density and positive capacitance response with stain, achieving high signal-to-noise ratio, high capacitance response sensitivity, and wide linear range, and it breaks through disadvantages of negative sensitivity and narrow linear range for conventional interdigital strain sensors. The prepared integrated strain sensor arrays are able to measure local strain of convoluted surfaces and monitor the motion of soft actuators in real time, and they would make conditions for intelligent control systems and the study of morphological intelligence. Copyright © 2021, The Authors. All rights reserved.

关键词： Nanocomposites

来源：评论

学校读者我要写书评

暂无评论

Improvement of the Degradation Activity of Phanerochaete Chrysosporium by Hybridization with Silica Nanoparticles

SSRN

引用

SSRN 2023年

作者： Li, Qichang Geng, Wei Hu, Zhiyi Lu, Yi Xie, Hao Deng, Zhao Yang, Xiaoyu Li, Yu Su, Baolian State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology 122 Luoshi Road Wuhan China Laboratory of Inorganic Materials Chemistry University of Namur 61 rue de Bruxelles NamurB-5000 Belgium School of Chemistry Chemical Engineering and Life Sciences Wuhan University of Technology 122 Luoshi Road Wuhan China Heinrich Heine University Düsseldorf Germany Harvard University United States

Silica nanoparticle hybridized P. chrysosporium mycelia pellets was prepare by a simple one-step composite technology-based approach, involving co-culturing silica nanoparticles with this fungus under mild culture conditions. The generated hybrid displays greatly improved peroxidase activity which reaches a maximum on the 5th day of culturing. Hybridization causes a morphology change and significantly enhances the rate of crystal violet degradation, the amounts of excreted extracellular manganese peroxidase and hydrogen peroxide, and the rate of glucose consumption. The results show that hybridization with silica nanoparticles significantly enhances of the degradation activity of P. chrysosporium cells. © 2023, The Authors. All rights reserved.

关键词： Silica nanoparticles

来源：评论

学校读者我要写书评

暂无评论

Phase Transitions in Mixed-Dimensional Perovskite: From Film Formation Evolution to its Impact on Optoelectronic Properties

SSRN

引用

SSRN 2024年

作者： Xiang, Jin Wang, Fei Liang, Xiao Duan, Dawei Yuan, Mingjian Wu, Tom Hu, Hanlin Shi, Yumeng International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education Institute of Microscale Optoelectronics Shenzhen University Shenzhen518060 China Hoffmann Institute of Advanced Materials Shenzhen Polytechnic University Shenzhen518055 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China College of Chemistry and Chemical Engineering Jishou University Hunan Jishou416000 China College of Chemistry Nankai University Tianjin300071 China Department of Applied Physics The Hong Kong Polytechnic University Kowloon999077 Hong Kong Key Laboratory of Luminescence and Optical Information Ministry of Education School of Physical Science and Engineering Beijing Jiaotong University Beijing100044 China

The integration of 2D/3D mixed-dimensional structures in perovskite solar cells (PSCs) has been demonstrated to substantially improve both their photovoltaic performance and device stability. However, the detailed formation mechanism of these mixed-dimensional perovskite phases remains largely unexplored. In this study, we investigate the in-depth formation evolution of mixed-dimensional perovskite phases using the pre-adding method under both one-step and two-step processing condition, where the HTAB ligand molecule is introduced into the perovskite precursor solution beforehand. In the two-step sequential deposition method, 2D perovskite phases formed sequentially via 2D-α/β/γ (upon the assistance of IPA solvent) → 2D-7.6° (upon thermal annealing) → 2D-7.3° (upon thermal annealing). Conversely, in the one-step method, a distinct progression is noted: 2D-7.6° (HTAB ligand react with intermediate phase) → 2D-7.3°. The 2D-α/β/γ phases exhibit extremely thin, belt-like crystals that cover the 3D perovskite surface, the 2D-7.6° phase trends to envelop the 3D perovskite grains without clear crystal morphology, while the 2D-7.3° phase forms distinct platelet-shaped crystals interspersed among the 3D perovskite grains. Leveraging the defect passivation properties of those mixed-dimensional perovskite phases, as well as improved film morphology and crystallinity adjusted by HTAB ligand, an external electroluminescence quantum efficiency (EQELED) of 13.5% is achieved in PSCs with a non-radiative voltage loss of just 52 mV, promoting the power conversion efficiency to 24.54%. This work offers the significant insights into the phase-transition of mixed-dimensional perovskite and their impact on the optoelectronic properties. © 2024, The Authors. All rights reserved.

关键词： Perovskite

来源：评论

学校读者我要写书评

暂无评论

Thickness Dependence of Structural and Optical Properties of Chromium Thin Films as an Infrared Reflector for Solar-thermal Conversion Applications

引用

Journal of Wuhan University of technology(materials Science) 2019年第6期34卷 1239-1247页

作者： LI Qingyu GONG Dianqing CHENG Xudong State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China

The thermal emittance of Cr film, as an IR reflector, was investigated for the use in SSAC. The Cr thin films with different thicknesses were deposited on silicon wafers, optical quartz and stainless steel substrates by cathodic arc ion plating technology as a metallic IR reflector layer in SSAC. The thickness of Cr thin films was optimized to achieve the minimum thermal emittance. The effects of structural, microstructural, optical, surface and cross-sectional morphological properties of Cr thin films were investigated on the emittance. An optimal thickness about 450 nm of the Cr thin film for the lowest total thermal emittance of 0.05 was obtained. The experimental results suggested that the Cr metallic thin film with optimal thickness could be used as an effective infrared reflector for the development of SSAC structure.

关键词： thermal emittance chromium thin film solar selective absorbing coating cathodic arc ion plating

来源：评论

学校读者我要写书评

暂无评论

Weaving 3D highly conductive hierarchically interconnected nanoporous web by threading MOF crystals onto multi walled carbon nanotubes for high performance Li-Se battery

引用

能源化学 2021年第8期59卷 396-404页

作者： Chao Li Yingying Wang Hongyan Li Jing Liu Jianping Song Luca Fusaro Zhi-Yi Hu Yanxin Chen Yu Li Bao-Lian Su Laboratory of Inorganic Materials Chemistry (CMI) University of Namur B-5000 Namur Belgium Namur Institute of Structured Matter (NISM) University of Namur 61 Rue de Bruxelles B-5000 Namur Belgium Institute of Microscale Optoelectronics College of Physics and Optoelectronic Engineering Collaborative Innovation Centre for Optoelectronic Science & Technology Shenzhen University Shenzhen 518060 Guangdong China Laboratory of Inorganic Materials Chemistry (CMI) University of Namur B-5000 Namur Belgium Namur Institute of Structured Matter (NISM) University of Namur 61 Rue de Bruxelles B-5000 Namur Belgium Laboratory of Living Materials at the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 Hubei China Namur Institute of Structured Matter (NISM) University of Namur 61 Rue de Bruxelles B-5000 Namur Belgium Laboratory of Inorganic Materials Chemistry (CMI) University of Namur B-5000 Namur Belgium Namur Institute of Structured Matter (NISM) University of Namur 61 Rue de Bruxelles B-5000 Namur Belgium Laboratory of Living Materials at the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 Hubei China

Lithium-selenium (Li-Se) battery has attracted growing ***,its practical application is still impeded by the shuttle effect of the formed ***,we report in-situ hydrothermal weaving the three-dimensional (3D) highly conductive hierarchically interconnected nanoporous web by threading microporous metal organic framework MIL-68(Al) crystals onto multi-walled carbon nanotubes (MWCNTs).Such 3D hierarchically nanoporous web (3D MIL-68 (Al)@MWCNTs web) with a very high surface area,a large amount of micropores,electrical conductivity and elasticity strongly traps the soluble polyselenides during the electrochemical reaction and significantly facilitates lithium ion diffusion and electron *** dynamic calculation confirmed the strong affinity of MIL-68 (Al) for the adsorption of polyselenides,quite suitable for Li-Se *** hexahedral channels (1.56 nm) are more efficient for the confinement of polyselenides and for the diffusion of electrolytes compared to their smaller triangular channels (0.63 nm).All these excellent characteristics of 3D MIL-68 (Al)@MWCNTs web with suitable confinement of a large amount of selenium and the conductive linkage between MIL-68(Al) host by MWCNTs result in a high capacity of 453 mAh/g at 0.2C with 99.5％ coulombic efficiency after 200 cycles with significantly improved cycle stability and rate *** 3D MIL-68 (Al)@MWCNTs web presents a good performance in Li-Se battery in term of the specific capacity and cycling stability and also in terms of rate performance compared with all the metal-organic framework (MOF) based or MOF derived porous carbons used in Li-Se battery.

关键词： Lithium selenium battery Selenium confinement 3D hierarchically nanoporous web Metal–organic framework (MOF) Multi walled carbon nanotubes

来源：评论

学校读者我要写书评

暂无评论

Interfacial Sulfur-Sensitization of PtNi Nanoalloy for Efficient Electrocatalytic Hydrogen Production in Alkaline Simulated Seawater

引用

Chemistry of materials 2023年第20期35卷 8529-8539页

作者： Fei Yu Yu-Xuan Xiao Jiang-Bo Chen Ge Tian Xiong Yang Fu-Fei Pu Jin-Yi Ouyang Kenneth I. Ozoemena Mark D. Symes Roberto M. Torresi Fazhou Wang Xiao-Yu Yang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing & State Key Laboratory of Silicate Materials for Architectures & Shenzhen Research Institute School of Materials Science and Engineering Wuhan University of Technology Wuhan 430070 China School of Chemical Engineering and Technology Sun Yat-sen University Zhuhai 519082 China Molecular Sciences Institute School of Chemistry University of the Witwatersrand Johannesburg 2050 South Africa WestCHEM School of Chemistry University of Glasgow Glasgow G12 8QQ United Kingdom Departamento de Química Fundamental Instituto de Química Universidade de São Paulo Av. Lineu Prestes 748 São Paulo 05508000 Brazil

Optimization of the electronic structure and surface physicochemical properties of PtNi nanoalloys by incorporation of sulfur (S) is an effective strategy for improving the efficiency of the electrocatalytic hydrogen evolution reaction (HER). However, few studies have been carried out to assess the seawater electrocatalytic performance of PtNi by incorporation of interfacial S from CdS nanocrystals. In this study, a simple method is developed to prepare CdS/PtNi, composed of a PtNi alloy supported with CdS quantum dots (QDs). Experimental data demonstrate that interfacial S-sensitization enhances the electron density of PtNi nanoalloy in CdS/PtNi. Therefore, CdS/PtNi exhibits superior performance toward HER in seawater. Specifically, CdS/PtNi displays a low overpotential of 22 mV at a current density of 10 mA cm–2, a higher specific activity of 24.7 mA cm–2at −0.07 V, and superior durability in seawater, all of which metrics exceed those of commercial Pt/C. Theoretical calculations provide additional evidence that interfacial S-sensitization of PtNi alloy raises electron densities, lowers the d-band center, facilitates water molecule adsorption, resistances to Cl–, and reduces the hydrogen adsorption Gibbs free energy of PtNi alloy. This study provides new opportunities for the design of efficient and stable electrocatalysts for large-scale production of hydrogen from seawater.

关键词： Alloys Cadmium sulfide Evolution reactions Platinum Seawater

来源：评论

学校读者我要写书评

暂无评论

Defect Control Based on Interfacial Passivation Via Post-Treatment of 1-Ethylpyridine Hydrobromide for Achieving Efficient and Stable Perovskite Solar Cells

SSRN

引用

SSRN 2022年

作者： Xia, Tian Jiang, Bo Liu, Weiting Li, Xingyu Dong, Haiyue Tian, Nan Zheng, Guoyuan Peng, Yong Yao, Disheng Long, Fei School of Materials Science and Engineering Guilin University of Technology Guilin541004 China Guangxi Key Laboratory of Optical and Electronic Materials and Devices School of Materials Science and Engineering Guilin University of Technology 12 Jiangan Road Guilin541004 China Collaborative Innovation Center for Exploration of Nonferrous Metal Deposits and Efficient Utilization of Resources Guilin University of Technology Guilin541004 China State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

The carrier recombination caused by a series of crystal defects in perovskite materials is still the main obstacle to further improve the photoelectric conversion efficiency. Herein, as an agent for interfacial engineering, 1-ethylpyridine hydrobromide (EPB) was employed to treat the FA1-xMAxPbI3-yBry perovskite film using a two-step sequential deposition method. The influence and mechanism of the post-treatment with EPB on the film properties and photovoltaic performance of the relevant perovskite solar cells (PSCs) were studied. The champion EPB-treated perovskite solar cell achieved a remarkable power conversion efficiency (PCE) of 20.71% with an enhanced short current density (Jsc) of 24.14 mA cm-2, which is higher than that (PCE=18.85%, Jsc=23.40 mA cm-2) of the pristine device without EPB. The nitrogen (N) atom in EPB exhibits a strong coordination with lead (Pb) from the perovskite, which reduces defect density and suppresses non-radiative recombination for achieving high-performance PSCs. The UV-vis and UPS results reveal that the effective passivation effect of EPB significantly eliminates the interfacial barrier that inhibits charge transport and improve operational stability of PSCs. As a result, The PCE of the EPB-treated device remains more than 90% of the initial efficiency after 400 hours of unpackaged and about 40% ambient humidity. © 2022, The Authors. All rights reserved.

关键词： Perovskite solar cells

来源：评论

学校读者我要写书评

暂无评论

Efficient Promotion of Cr(Vi) Removal Over Bi2s3 Nanostructure Assisted with Cupric Ions: Potential Applications in Electroplating Wastewater and Contaminated Groundwater

SSRN

引用

SSRN 2022年

作者： Tao, Xiong Chen, Fengxi Li, Jun Liu, Yun-Ling Hu, Xiaowu Chen, Rong State Key Laboratory of New Textile Materials & Advanced Processing Technologies Wuhan Textile University Wuhan430200 China School of Chemistry and Environmental Engineering Wuhan Institute of Technology Wuhan430205 China Henan Institute of Advanced Technology Zhengzhou University Zhengzhou450002 China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry Jilin University Jilin130012 China

Emerging Bi2S3 -based nanotechnology has great potential in Cr(VI)-contaminated wastewater treatment. In this work, it was found for the first time that Bi2S3 nanostructure (BS-D) prepared from dual sulfur sources of L-cysteine and ammonium sulfide efficiently promoted Cr(VI) removal with excellent selectivity for simultaneous removal of Cr(VI) and Cu2+ from aqueous solutions containing various co-existing ions (including Na+, K+, Ca2+, Zn2+, Ni2+, Cd2+, NO3-, SO42- and Cl- ) at pH > 3, preferably at pH = 4.5. Besides, BS-D exhibited stable performance for the co-removal of Cr(VI) and Cu2+ in five recycling tests. Kinetic and thermodynamic studies indicated that the adsorption of Cr(VI) or Cu2+ by BS-D was a spontaneous endothermic process and conformed to pseudo-second-order kinetic model. The adsorbed Cr(VI) ions were partially reduced to Cr(III), which were leached into the solution at pH ≤ 3, inhibiting the adsorption of Cu2+ on BS-D and its promotional effect on Cr(VI) removal by BS-D. The mutual promotional effects of Cu2+ and Cr(VI) could be attributed to electrostatic attraction between HCrO4- and Cu2+ and smaller pH variation of Cr(VI)-Cu2+ mixed solution during their co-removal by BS-D. Finally, potential applications of BS-D were demonstrated by co-removal of Cr(VI) and Cu2+ from two real water matrixes (electroplating wastewater and contaminated groundwater). This work provided a promising BS-D adsorbent for Cr(VI)-contaminated wastewater treatment, and shed insight on the influence of Cu2+ on the Cr(VI) removal by BS-D. © 2022, The Authors. All rights reserved.

关键词： Adsorption

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to "Phosphorus-doped graphene quantum dots loaded on TiO2 for enhanced photodegradation" [Appl. Surf. Sci. 526 (2020) 146724]

引用

Applied Surface Science 2021年 560卷 150010-150010页

作者： Guo, Zengsheng Wu, Hao Tang, Tao Li, Ming Wen, Jianfeng Li, Xinyu College of Science & Ministry-province Jointly-constructed Cultivation Base for State Key Laboratory of Processing for Mom-ferrous Metal and Featured Materials & Key Lab. of Nonferrous Materials and New Processing Technology Guilin University of Technology Guilin541004 China

来源：评论

学校读者我要写书评

暂无评论

Exploring Cu0–Cu+ Sites for Enhancing Non-Enzymatic Photoelectrochemical Glucose Sensing Performance

SSRN

引用

SSRN 2023年

作者： Ren, Xiaohui Xu, Feicui Chen, Rongsheng Ma, Feng Shi, Li Liu, Huating Ren, Long Zhang, Hua Ni, Hongwei Xie, Zhongjian The State Key Laboratory of Refractories and Metallurgy Faculty of Materials Wuhan University of Science and Technology Wuhan430081 China Shenzhen Engineering Laboratory of Phosphorene and Optoelectronics Collaborative Innovation Center for Optoelectronic Science and Technology Key Laboratory of Optoelectronic Devices and Systems Ministry of Education and Guangdong Province Shenzhen University Shenzhen518060 China Institute of Advanced Materials and Nanotechnology School of Chemistry and Chemical Engineering Wuhan University of Science and Technology Wuhan430081 China School of Materials Science and Chemical Engineering Ningbo University Zhejiang Ningbo315211 China School of Electrical and Electronic Engineering Wuhan Polytechnic University Wuhan430023 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Institute of Pediatrics Shenzhen Children's Hospital Shenzhen518038 China

Photoelectrochemical (PEC) sensing platforms demonstrate outstanding performances towards enzyme-free glucose detection, and exploring glucose reactive electrodes with efficient active sites and enhanced carrier transport/separation behavior would be beneficial for PEC glucose detection. Herein, we fabricated two-dimensional Cu3(PO4)2 nanosheets as the photoactive material for glucose detection. The morphology and structural characterizations prove the existence of balanced Cu0–Cu+ active sites which has been regarded as the key factor on improving PEC performance for fast glucose detection. The photoelectric current of Cu3(PO4)2 nanosheets peeled from Cu3(PO4)2 bulk is three times that of 0 µM at 50 µM, and the response performance is increased by ~9 times compared to Cu3(PO4)2 bulk. Under light conditions, the limit of detection (LOD) as low as 17.68 µM at low concentrations of 20-100 µM, and LOD of 131.69 µM at high concentrations of 100-1000 µM can be achieved. This work might provide the basic understanding and new opportunities in applying two-dimensional Cu3(PO4)2 nanosheets for glucose detection. © 2023, The Authors. All rights reserved.

关键词： Copper compounds

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：